From: "Wu, Jingjing" <jingjing.wu@intel.com>
To: "Dai, Wei" <wei.dai@intel.com>,
"thomas@monjalon.net" <thomas@monjalon.net>,
"Lu, Wenzhuo" <wenzhuo.lu@intel.com>,
"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"Zhang, Helin" <helin.zhang@intel.com>,
"Peng, Yuan" <yuan.peng@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 5/5] app/testpmd: enhance command to test NIC reset
Date: Fri, 30 Jun 2017 09:09:48 +0000 [thread overview]
Message-ID: <9BB6961774997848B5B42BEC655768F810DB765C@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1498748282-69914-6-git-send-email-wei.dai@intel.com>
> -----Original Message-----
> From: Dai, Wei
> Sent: Thursday, June 29, 2017 10:58 PM
> To: thomas@monjalon.net; Lu, Wenzhuo <wenzhuo.lu@intel.com>; Ananyev, Konstantin
> <konstantin.ananyev@intel.com>; Zhang, Helin <helin.zhang@intel.com>; Wu, Jingjing
> <jingjing.wu@intel.com>; yuan.pntel.com
> Cc: dev@dpdk.org; Dai, Wei <wei.dai@intel.com>
> Subject: [PATCH v4 5/5] app/testpmd: enhance command to test NIC reset
>
> When PF is reset, a message will show it and all its
> VF need to be reset.
> User can run the command "port reset port_id"
> to reset the VF port and to keep same port id without
> any configuration. Then user can run "port stop port_id"
> and "port start port_id" to reconfigure its forwarding
> mode and parmaters as previous ones.
> To avoid crash, current forwarding should be stopped
> before running "port reset port_id".
>
> Signed-off-by: Wei Dai <wei.dai@intel.com>
> ---
> app/test-pmd/cmdline.c | 10 ++++++---
> app/test-pmd/testpmd.c | 61
> +++++++++++++++++++++++++++++++++++++++++++++++---
> app/test-pmd/testpmd.h | 1 +
> 3 files changed, 66 insertions(+), 6 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index ff8ffd2..58ba6e4 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -950,6 +950,8 @@ static void cmd_operate_port_parsed(void *parsed_result,
> stop_port(RTE_PORT_ALL);
> else if (!strcmp(res->name, "close"))
> close_port(RTE_PORT_ALL);
> + else if (!strcmp(res->name, "reset"))
> + reset_port(RTE_PORT_ALL);
> else
> printf("Unknown parameter\n");
> }
> @@ -959,7 +961,7 @@ cmdline_parse_token_string_t cmd_operate_port_all_cmd =
> "port");
> cmdline_parse_token_string_t cmd_operate_port_all_port =
> TOKEN_STRING_INITIALIZER(struct cmd_operate_port_result, name,
> - "start#stop#close");
> + "start#stop#close#reset");
> cmdline_parse_token_string_t cmd_operate_port_all_all =
> TOKEN_STRING_INITIALIZER(struct cmd_operate_port_result, value, "all");
>
> @@ -994,6 +996,8 @@ static void cmd_operate_specific_port_parsed(void *parsed_result,
> stop_port(res->value);
> else if (!strcmp(res->name, "close"))
> close_port(res->value);
> + else if (!strcmp(res->name, "reset"))
> + reset_port(res->value);
> else
> printf("Unknown parameter\n");
> }
> @@ -1003,7 +1007,7 @@ cmdline_parse_token_string_t cmd_operate_specific_port_cmd =
> keyword, "port");
> cmdline_parse_token_string_t cmd_operate_specific_port_port =
> TOKEN_STRING_INITIALIZER(struct cmd_operate_specific_port_result,
> - name, "start#stop#close");
> + name, "start#stop#close#reset");
> cmdline_parse_token_num_t cmd_operate_specific_port_id =
> TOKEN_NUM_INITIALIZER(struct cmd_operate_specific_port_result,
> value, UINT8);
> @@ -1011,7 +1015,7 @@ cmdline_parse_token_num_t cmd_operate_specific_port_id =
> cmdline_parse_inst_t cmd_operate_specific_port = {
> .f = cmd_operate_specific_port_parsed,
> .data = NULL,
> - .help_str = "port start|stop|close <port_id>: Start/Stop/Close port_id",
> + .help_str = "port start|stop|close|reset <port_id>: Start/Stop/Close/Reset port_id",
> .tokens = {
> (void *)&cmd_operate_specific_port_cmd,
> (void *)&cmd_operate_specific_port_port,
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index b29328a..7773879 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -1403,6 +1403,7 @@ start_port(portid_t pid)
> queueid_t qi;
> struct rte_port *port;
> struct ether_addr mac_addr;
> + struct rte_eth_dev_info dev_info;
> enum rte_eth_event_type event_type;
>
> if (port_id_is_invalid(pid, ENABLED_WARN))
> @@ -1424,9 +1425,14 @@ start_port(portid_t pid)
>
> if (port->need_reconfig > 0) {
> port->need_reconfig = 0;
> -
> - printf("Configuring Port %d (socket %u)\n", pi,
> - port->socket_id);
> + rte_eth_dev_info_get(pi, &dev_info);
> + printf("Configuring Port %d (socket %u) with "
> + "PCI Address: " PCI_PRI_FMT "\n",
> + pi, port->socket_id,
> + dev_info.pci_dev->addr.domain,
> + dev_info.pci_dev->addr.bus,
> + dev_info.pci_dev->addr.devid,
> + dev_info.pci_dev->addr.function);
I'm OK with the command change, but could you remove the
PCI print from here. The same reason as your patch 4/5.
Thanks
Jingjing
next prev parent reply other threads:[~2017-06-30 9:09 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-27 8:22 [dpdk-dev] [PATCH 0/7] NIC port restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 1/7] ethdev: add support of NIC restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 2/7] ethdev: add support of restoration of queue state Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 3/7] ethdev: add support of restoration of port status Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 4/7] ethdev: add support of MTU restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 5/7] ethdev: add support of restoration of multicast addr Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 6/7] net/ixgbe: add support of restoration Wei Dai
2017-05-27 8:22 ` [dpdk-dev] [PATCH 7/7] net/i40e: " Wei Dai
2017-06-07 7:50 ` Wu, Jingjing
2017-06-20 7:55 ` Dai, Wei
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 0/5] Support NIC reset and keep same port id Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 1/5] ethdev: add support of NIC reset Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 2/5] net/ixgbe: add support of reset Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 3/5] net/i40e: " Wei Dai
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 4/5] app/testpmd: add command to test NIC reset Wei Dai
2017-06-28 9:10 ` Wu, Jingjing
2017-06-29 7:00 ` Dai, Wei
2017-06-27 14:07 ` [dpdk-dev] [PATCH v2 5/5] app/testpmd: add command to test NIC restoration Wei Dai
2017-06-28 9:05 ` Wu, Jingjing
2017-06-29 6:58 ` Dai, Wei
2017-06-29 3:51 ` [dpdk-dev] [PATCH v2 0/5] Support NIC reset and keep same port id Peng, Yuan
2017-06-29 6:29 ` Dai, Wei
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 0/4] " Wei Dai
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 1/4] ethdev: add support of NIC reset Wei Dai
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 2/4] net/ixgbe: add support of reset Wei Dai
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 3/4] net/i40e: " Wei Dai
2017-06-29 8:34 ` [dpdk-dev] [PATCH v3 4/4] app/testpmd: enhance command to test NIC reset Wei Dai
2017-06-29 14:57 ` [dpdk-dev] [PATCH v4 0/5] Support NIC reset and keep same port id Wei Dai
2017-06-29 14:57 ` [dpdk-dev] [PATCH v4 1/5] ethdev: add support of NIC reset Wei Dai
2017-06-29 14:57 ` [dpdk-dev] [PATCH v4 2/5] net/ixgbe: add support of reset Wei Dai
2017-06-29 14:58 ` [dpdk-dev] [PATCH v4 3/5] net/i40e: " Wei Dai
2017-06-30 8:54 ` Wu, Jingjing
2017-06-30 9:37 ` Dai, Wei
2017-06-29 14:58 ` [dpdk-dev] [PATCH v4 4/5] app/testpmd: display PCI address in port info Wei Dai
2017-06-30 9:07 ` Wu, Jingjing
2017-06-29 14:58 ` [dpdk-dev] [PATCH v4 5/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-06-30 5:13 ` Peng, Yuan
2017-06-30 8:57 ` Wu, Jingjing
2017-06-30 9:09 ` Wu, Jingjing [this message]
2017-06-30 9:15 ` Dai, Wei
2017-06-30 5:11 ` [dpdk-dev] [PATCH v4 0/5] Support NIC reset and keep same port id Peng, Yuan
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 0/4] " Wei Dai
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 1/4] ethdev: add support of NIC reset Wei Dai
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 2/4] net/ixgbe: add support of reset Wei Dai
2017-07-07 8:25 ` Thomas Monjalon
2017-07-07 8:36 ` Thomas Monjalon
2017-07-10 10:19 ` Dai, Wei
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 3/4] net/i40e: " Wei Dai
2017-06-30 10:12 ` [dpdk-dev] [PATCH v5 4/4] app/testpmd: enhance command to test NIC reset Wei Dai
2017-06-30 10:50 ` [dpdk-dev] [PATCH v5 0/4] Support NIC reset and keep same port id Wu, Jingjing
2017-07-05 5:48 ` Dai, Wei
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 " Wei Dai
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 1/4] ethdev: add support of NIC reset Wei Dai
2017-07-10 11:35 ` Jerin Jacob
2017-07-11 1:57 ` Dai, Wei
2017-07-11 5:17 ` Jerin Jacob
2017-07-11 14:36 ` Dai, Wei
2017-07-12 16:13 ` Jerin Jacob
2017-07-13 16:06 ` Dai, Wei
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 2/4] net/ixgbe: add support of reset Wei Dai
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 3/4] net/i40e: " Wei Dai
2017-07-10 10:05 ` [dpdk-dev] [PATCH v6 4/4] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 0/5] Support NIC reset and keep same port id Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 1/5] ethdev: add support of NIC reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 2/5] net/ixgbe: add support of reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 3/5] net/i40e: " Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 4/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-13 15:53 ` [dpdk-dev] [PATCH v7 5/5] doc: add description of the NIC reset API Wei Dai
2017-07-16 19:25 ` [dpdk-dev] [PATCH v7 0/5] Support NIC reset and keep same port id Thomas Monjalon
2017-07-17 14:02 ` Dai, Wei
2017-07-19 14:36 ` Dai, Wei
2017-07-17 15:14 ` [dpdk-dev] [PATCH v8 0/5] Support of " Wei Dai
2017-07-17 15:14 ` [dpdk-dev] [PATCH v8 1/5] ethdev: add support of NIC reset Wei Dai
2017-07-20 13:21 ` Remy Horton
2017-07-23 13:45 ` Dai, Wei
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 2/5] net/ixgbe: add support of reset Wei Dai
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 3/5] net/i40e: " Wei Dai
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 4/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-17 15:15 ` [dpdk-dev] [PATCH v8 5/5] doc: add description of the NIC reset API Wei Dai
2017-07-20 13:22 ` Remy Horton
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 0/5] Support of NIC reset and keep same port id Wei Dai
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 1/5] ethdev: add support of NIC reset Wei Dai
2017-09-13 20:51 ` Thomas Monjalon
2017-09-14 18:16 ` Luca Boccassi
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 2/5] net/ixgbe: add support of reset Wei Dai
2017-09-13 20:53 ` Thomas Monjalon
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 3/5] net/i40e: " Wei Dai
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 4/5] app/testpmd: enhance command to test NIC reset Wei Dai
2017-07-23 9:15 ` [dpdk-dev] [PATCH v9 5/5] doc: add description of the NIC reset API Wei Dai
2017-09-13 21:02 ` [dpdk-dev] [PATCH v9 0/5] Support of NIC reset and keep same port id Thomas Monjalon
2017-09-14 1:32 ` Dai, Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9BB6961774997848B5B42BEC655768F810DB765C@SHSMSX103.ccr.corp.intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
--cc=helin.zhang@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=thomas@monjalon.net \
--cc=wei.dai@intel.com \
--cc=wenzhuo.lu@intel.com \
--cc=yuan.peng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).