From: "Xia, Chenbo" <chenbo.xia@intel.com>
To: David Marchand <david.marchand@redhat.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: "thomas@monjalon.net" <thomas@monjalon.net>,
"ferruh.yigit@amd.com" <ferruh.yigit@amd.com>,
"nipun.gupta@amd.com" <nipun.gupta@amd.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
"Burakov, Anatoly" <anatoly.burakov@intel.com>,
Jay Zhou <jianjay.zhou@huawei.com>,
"McDaniel, Timothy" <timothy.mcdaniel@intel.com>,
Julien Aube <julien_dpdk@jaube.fr>,
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>,
"Guo, Junfeng" <junfeng.guo@intel.com>,
Jeroen de Borst <jeroendb@google.com>,
Rushil Gupta <rushilg@google.com>,
Joshua Washington <joshwash@google.com>,
Dongdong Liu <liudongdong3@huawei.com>,
Yisen Zhuang <yisen.zhuang@huawei.com>,
"Maxime Coquelin" <maxime.coquelin@redhat.com>,
Gaetan Rivet <grive@u256.net>
Subject: RE: [PATCH v2 04/15] bus/pci: find PCI capability
Date: Thu, 7 Sep 2023 12:43:32 +0000 [thread overview]
Message-ID: <CH3PR11MB836217E8783F4E3286B74A1F9CEEA@CH3PR11MB8362.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20230821113549.3191921-5-david.marchand@redhat.com>
Hi David,
> -----Original Message-----
> From: David Marchand <david.marchand@redhat.com>
> Sent: Monday, August 21, 2023 7:36 PM
> To: dev@dpdk.org
> Cc: thomas@monjalon.net; ferruh.yigit@amd.com; Xia, Chenbo
> <chenbo.xia@intel.com>; nipun.gupta@amd.com; Richardson, Bruce
> <bruce.richardson@intel.com>; Burakov, Anatoly <anatoly.burakov@intel.com>;
> Jay Zhou <jianjay.zhou@huawei.com>; McDaniel, Timothy
> <timothy.mcdaniel@intel.com>; Julien Aube <julien_dpdk@jaube.fr>; Rahul
> Lakkireddy <rahul.lakkireddy@chelsio.com>; Guo, Junfeng
> <junfeng.guo@intel.com>; Jeroen de Borst <jeroendb@google.com>; Rushil
> Gupta <rushilg@google.com>; Joshua Washington <joshwash@google.com>;
> Dongdong Liu <liudongdong3@huawei.com>; Yisen Zhuang
> <yisen.zhuang@huawei.com>; Maxime Coquelin <maxime.coquelin@redhat.com>;
> Gaetan Rivet <grive@u256.net>
> Subject: [PATCH v2 04/15] bus/pci: find PCI capability
>
> Introduce two helpers so that drivers stop reinventing the wheel when it
> comes to finding capabilities in a device PCI configuration space.
> Use it in existing drivers.
>
> Note:
> - base/ drivers code is left untouched, only some wrappers in cxgbe
> are touched,
> - bnx2x maintained a per device cache of capabilities, this code has been
> reworked to only cache the capabilities used in this driver,
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
> ---
> Changes since v1:
> - updated commitlog,
> - separated VFIO changes for using standard PCI helper in a separate
> patch,
> - marked new experimental symbols with current version,
> - reordered defines in rte_pci.h,
>
> ---
> drivers/bus/pci/linux/pci_vfio.c | 74 ++++--------------
> drivers/bus/pci/pci_common.c | 45 +++++++++++
> drivers/bus/pci/rte_bus_pci.h | 31 ++++++++
> drivers/bus/pci/version.map | 4 +
> drivers/crypto/virtio/virtio_pci.c | 57 +++++---------
> drivers/event/dlb2/pf/dlb2_main.c | 42 +---------
> drivers/net/bnx2x/bnx2x.c | 41 +++++-----
> drivers/net/cxgbe/base/adapter.h | 28 +------
> drivers/net/gve/gve_ethdev.c | 46 ++---------
> drivers/net/gve/gve_ethdev.h | 4 -
> drivers/net/hns3/hns3_ethdev_vf.c | 79 +++----------------
> drivers/net/virtio/virtio_pci.c | 121 +++++------------------------
> lib/pci/rte_pci.h | 11 +++
> 13 files changed, 186 insertions(+), 397 deletions(-)
>
> diff --git a/drivers/bus/pci/linux/pci_vfio.c
> b/drivers/bus/pci/linux/pci_vfio.c
> index 958f8b3b52..614ed5d696 100644
> --- a/drivers/bus/pci/linux/pci_vfio.c
> +++ b/drivers/bus/pci/linux/pci_vfio.c
> @@ -110,74 +110,34 @@ static int
> pci_vfio_get_msix_bar(const struct rte_pci_device *dev,
> struct pci_msix_table *msix_table)
> {
> - int ret;
> - uint32_t reg;
> - uint16_t flags;
> - uint8_t cap_id, cap_offset;
> + off_t cap_offset;
>
> - /* read PCI capability pointer from config space */
> - ret = rte_pci_read_config(dev, ®, sizeof(reg),
> PCI_CAPABILITY_LIST);
> - if (ret != sizeof(reg)) {
> - RTE_LOG(ERR, EAL,
> - "Cannot read capability pointer from PCI config
> space!\n");
> + cap_offset = rte_pci_find_capability(dev, PCI_CAP_ID_MSIX);
I notice in some cases we use rte_pci_has_capability_list() to check first,
then looking for specific cap, in other cases we don't use
rte_pci_has_capability_list(). Since we define this API, should we always do
the check?
> + if (cap_offset < 0)
> return -1;
> - }
>
> - /* we need first byte */
> - cap_offset = reg & 0xFF;
> + if (cap_offset != 0) {
> + uint16_t flags;
> + uint32_t reg;
>
> - while (cap_offset) {
> -
> - /* read PCI capability ID */
> - ret = rte_pci_read_config(dev, ®, sizeof(reg), cap_offset);
> - if (ret != sizeof(reg)) {
> + /* table offset resides in the next 4 bytes */
> + if (rte_pci_read_config(dev, ®, sizeof(reg), cap_offset + 4)
> < 0) {
> RTE_LOG(ERR, EAL,
> - "Cannot read capability ID from PCI config
> space!\n");
> + "Cannot read MSIX table from PCI config space!\n");
> return -1;
> }
>
> - /* we need first byte */
> - cap_id = reg & 0xFF;
> -
> - /* if we haven't reached MSI-X, check next capability */
> - if (cap_id != PCI_CAP_ID_MSIX) {
> - ret = rte_pci_read_config(dev, ®, sizeof(reg),
> cap_offset);
> - if (ret != sizeof(reg)) {
> - RTE_LOG(ERR, EAL,
> - "Cannot read capability pointer from PCI
> config space!\n");
> - return -1;
> - }
> -
> - /* we need second byte */
> - cap_offset = (reg & 0xFF00) >> 8;
> -
> - continue;
> + if (rte_pci_read_config(dev, &flags, sizeof(flags), cap_offset
> + 2) < 0) {
> + RTE_LOG(ERR, EAL,
> + "Cannot read MSIX flags from PCI config space!\n");
> + return -1;
> }
> - /* else, read table offset */
> - else {
> - /* table offset resides in the next 4 bytes */
> - ret = rte_pci_read_config(dev, ®, sizeof(reg),
> cap_offset + 4);
> - if (ret != sizeof(reg)) {
> - RTE_LOG(ERR, EAL,
> - "Cannot read table offset from PCI config
> space!\n");
> - return -1;
> - }
> -
> - ret = rte_pci_read_config(dev, &flags, sizeof(flags),
> cap_offset + 2);
> - if (ret != sizeof(flags)) {
> - RTE_LOG(ERR, EAL,
> - "Cannot read table flags from PCI config
> space!\n");
> - return -1;
> - }
> -
> - msix_table->bar_index = reg & RTE_PCI_MSIX_TABLE_BIR;
> - msix_table->offset = reg & RTE_PCI_MSIX_TABLE_OFFSET;
> - msix_table->size =
> - 16 * (1 + (flags & RTE_PCI_MSIX_FLAGS_QSIZE));
>
> - return 0;
> - }
> + msix_table->bar_index = reg & RTE_PCI_MSIX_TABLE_BIR;
> + msix_table->offset = reg & RTE_PCI_MSIX_TABLE_OFFSET;
> + msix_table->size = 16 * (1 + (flags &
> RTE_PCI_MSIX_FLAGS_QSIZE));
> }
> +
> return 0;
> }
>
> diff --git a/drivers/bus/pci/pci_common.c b/drivers/bus/pci/pci_common.c
> index 382b0b8946..52272617eb 100644
> --- a/drivers/bus/pci/pci_common.c
> +++ b/drivers/bus/pci/pci_common.c
> @@ -813,6 +813,51 @@ rte_pci_get_iommu_class(void)
> return iova_mode;
> }
>
> +bool
> +rte_pci_has_capability_list(const struct rte_pci_device *dev)
> +{
> + uint16_t status;
> +
> + if (rte_pci_read_config(dev, &status, sizeof(status),
> RTE_PCI_STATUS) != sizeof(status))
> + return false;
> +
> + return (status & RTE_PCI_STATUS_CAP_LIST) != 0;
> +}
> +
> +off_t
> +rte_pci_find_capability(const struct rte_pci_device *dev, uint8_t cap)
> +{
> + off_t offset;
> + uint8_t pos;
> + int ttl;
> +
> + offset = RTE_PCI_CAPABILITY_LIST;
> + ttl = (RTE_PCI_CFG_SPACE_SIZE - RTE_PCI_STD_HEADER_SIZEOF) /
> RTE_PCI_CAP_SIZEOF;
> +
> + if (rte_pci_read_config(dev, &pos, sizeof(pos), offset) < 0)
> + return -1;
> +
> + while (pos && ttl--) {
> + uint16_t ent;
> + uint8_t id;
> +
> + offset = pos;
> + if (rte_pci_read_config(dev, &ent, sizeof(ent), offset) < 0)
> + return -1;
> +
> + id = ent & 0xff;
> + if (id == 0xff)
> + break;
> +
> + if (id == cap)
> + return offset;
> +
> + pos = (ent >> 8);
> + }
> +
> + return 0;
> +}
> +
> off_t
> rte_pci_find_ext_capability(const struct rte_pci_device *dev, uint32_t
> cap)
> {
> diff --git a/drivers/bus/pci/rte_bus_pci.h b/drivers/bus/pci/rte_bus_pci.h
> index 75d0030eae..1ed33dbf3d 100644
> --- a/drivers/bus/pci/rte_bus_pci.h
> +++ b/drivers/bus/pci/rte_bus_pci.h
> @@ -68,6 +68,37 @@ void rte_pci_unmap_device(struct rte_pci_device *dev);
> */
> void rte_pci_dump(FILE *f);
>
> +/**
> + * Check whether this device has a PCI capability list.
> + *
> + * @param dev
> + * A pointer to rte_pci_device structure.
> + *
> + * @return
> + * true/false
> + */
> +__rte_experimental
> +bool rte_pci_has_capability_list(const struct rte_pci_device *dev);
> +
> +/**
> + * Find device's PCI capability.
> + *
> + * @param dev
> + * A pointer to rte_pci_device structure.
> + *
> + * @param cap
> + * Capability to be found, which can be any from
> + * RTE_PCI_CAP_ID_*, defined in librte_pci.
> + *
> + * @return
> + * > 0: The offset of the next matching capability structure
> + * within the device's PCI configuration space.
> + * < 0: An error in PCI config space read.
> + * = 0: Device does not support it.
> + */
> +__rte_experimental
> +off_t rte_pci_find_capability(const struct rte_pci_device *dev, uint8_t
> cap);
> +
> /**
> * Find device's extended PCI capability.
> *
> diff --git a/drivers/bus/pci/version.map b/drivers/bus/pci/version.map
> index a0000f7938..2674f30235 100644
> --- a/drivers/bus/pci/version.map
> +++ b/drivers/bus/pci/version.map
> @@ -25,6 +25,10 @@ EXPERIMENTAL {
> # added in 23.07
> rte_pci_mmio_read;
> rte_pci_mmio_write;
> +
> + # added in 23.11
> + rte_pci_find_capability;
> + rte_pci_has_capability_list;
> };
>
> INTERNAL {
> diff --git a/drivers/crypto/virtio/virtio_pci.c
> b/drivers/crypto/virtio/virtio_pci.c
> index 95a43c8801..abc52b4701 100644
> --- a/drivers/crypto/virtio/virtio_pci.c
> +++ b/drivers/crypto/virtio/virtio_pci.c
> @@ -19,7 +19,6 @@
> * we can't simply include that header here, as there is no such
> * file for non-Linux platform.
> */
> -#define PCI_CAPABILITY_LIST 0x34
> #define PCI_CAP_ID_VNDR 0x09
> #define PCI_CAP_ID_MSIX 0x11
>
> @@ -343,8 +342,9 @@ get_cfg_addr(struct rte_pci_device *dev, struct
> virtio_pci_cap *cap)
> static int
> virtio_read_caps(struct rte_pci_device *dev, struct virtio_crypto_hw *hw)
> {
> - uint8_t pos;
> struct virtio_pci_cap cap;
> + uint16_t flags;
> + off_t pos;
> int ret;
>
> if (rte_pci_map_device(dev)) {
> @@ -352,44 +352,26 @@ virtio_read_caps(struct rte_pci_device *dev, struct
> virtio_crypto_hw *hw)
> return -1;
> }
>
> - ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
> - if (ret < 0) {
> - VIRTIO_CRYPTO_INIT_LOG_DBG("failed to read pci capability
> list");
> - return -1;
> + /*
> + * Transitional devices would also have this capability,
> + * that's why we also check if msix is enabled.
> + */
> + pos = rte_pci_find_capability(dev, PCI_CAP_ID_MSIX);
> + if (pos > 0 && rte_pci_read_config(dev, &flags, sizeof(flags),
> + pos + 2) == sizeof(flags)) {
> + if (flags & PCI_MSIX_ENABLE)
> + hw->use_msix = VIRTIO_MSIX_ENABLED;
> + else
> + hw->use_msix = VIRTIO_MSIX_DISABLED;
> + } else {
> + hw->use_msix = VIRTIO_MSIX_NONE;
> }
>
> - while (pos) {
> - ret = rte_pci_read_config(dev, &cap, sizeof(cap), pos);
> - if (ret < 0) {
> - VIRTIO_CRYPTO_INIT_LOG_ERR(
> - "failed to read pci cap at pos: %x", pos);
> - break;
> - }
> -
> - if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> - /* Transitional devices would also have this capability,
> - * that's why we also check if msix is enabled.
> - * 1st byte is cap ID; 2nd byte is the position of next
> - * cap; next two bytes are the flags.
> - */
> - uint16_t flags = ((uint16_t *)&cap)[1];
> -
> - if (flags & PCI_MSIX_ENABLE)
> - hw->use_msix = VIRTIO_MSIX_ENABLED;
> - else
> - hw->use_msix = VIRTIO_MSIX_DISABLED;
> - }
> -
> - if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
> - VIRTIO_CRYPTO_INIT_LOG_DBG(
> - "[%2x] skipping non VNDR cap id: %02x",
> - pos, cap.cap_vndr);
> - goto next;
> - }
> -
> + pos = rte_pci_find_capability(dev, PCI_CAP_ID_VNDR);
The logic of vendor cap init seems incorrect. Virtio devices have multiple
Vendor cap (different cfg type). But now the logic seems to only init the first
one.
> + if (pos > 0 && rte_pci_read_config(dev, &cap, sizeof(cap), pos) ==
> sizeof(cap)) {
> VIRTIO_CRYPTO_INIT_LOG_DBG(
> "[%2x] cfg type: %u, bar: %u, offset: %04x, len: %u",
> - pos, cap.cfg_type, cap.bar, cap.offset, cap.length);
> + (unsigned int)pos, cap.cfg_type, cap.bar, cap.offset,
> cap.length);
>
> switch (cap.cfg_type) {
> case VIRTIO_PCI_CAP_COMMON_CFG:
> @@ -411,9 +393,6 @@ virtio_read_caps(struct rte_pci_device *dev, struct
> virtio_crypto_hw *hw)
> hw->isr = get_cfg_addr(dev, &cap);
> break;
> }
> -
> -next:
> - pos = cap.cap_next;
> }
...
> diff --git a/drivers/net/virtio/virtio_pci.c
> b/drivers/net/virtio/virtio_pci.c
> index 29eb739b04..9fd9db3e03 100644
> --- a/drivers/net/virtio/virtio_pci.c
> +++ b/drivers/net/virtio/virtio_pci.c
> @@ -20,7 +20,6 @@
> * we can't simply include that header here, as there is no such
> * file for non-Linux platform.
> */
> -#define PCI_CAPABILITY_LIST 0x34
> #define PCI_CAP_ID_VNDR 0x09
> #define PCI_CAP_ID_MSIX 0x11
>
> @@ -38,46 +37,16 @@ struct virtio_pci_internal
> virtio_pci_internal[RTE_MAX_ETHPORTS];
> static enum virtio_msix_status
> vtpci_msix_detect(struct rte_pci_device *dev)
> {
> - uint8_t pos;
> - int ret;
> + uint16_t flags;
> + off_t pos;
>
> - ret = rte_pci_read_config(dev, &pos, 1, PCI_CAPABILITY_LIST);
> - if (ret != 1) {
> - PMD_INIT_LOG(DEBUG,
> - "failed to read pci capability list, ret %d", ret);
> - return VIRTIO_MSIX_NONE;
> - }
> -
> - while (pos) {
> - uint8_t cap[2];
> -
> - ret = rte_pci_read_config(dev, cap, sizeof(cap), pos);
> - if (ret != sizeof(cap)) {
> - PMD_INIT_LOG(DEBUG,
> - "failed to read pci cap at pos: %x ret %d",
> - pos, ret);
> - break;
> - }
> -
> - if (cap[0] == PCI_CAP_ID_MSIX) {
> - uint16_t flags;
> -
> - ret = rte_pci_read_config(dev, &flags, sizeof(flags),
> - pos + sizeof(cap));
> - if (ret != sizeof(flags)) {
> - PMD_INIT_LOG(DEBUG,
> - "failed to read pci cap at pos:"
> - " %x ret %d", pos + 2, ret);
> - break;
> - }
> -
> - if (flags & PCI_MSIX_ENABLE)
> - return VIRTIO_MSIX_ENABLED;
> - else
> - return VIRTIO_MSIX_DISABLED;
> - }
> -
> - pos = cap[1];
> + pos = rte_pci_find_capability(dev, PCI_CAP_ID_MSIX);
> + if (pos > 0 && rte_pci_read_config(dev, &flags, sizeof(flags),
> + pos + 2) == sizeof(flags)) {
> + if (flags & PCI_MSIX_ENABLE)
> + return VIRTIO_MSIX_ENABLED;
> + else
> + return VIRTIO_MSIX_DISABLED;
> }
>
> return VIRTIO_MSIX_NONE;
> @@ -623,8 +592,8 @@ static int
> virtio_read_caps(struct rte_pci_device *pci_dev, struct virtio_hw *hw)
> {
> struct virtio_pci_dev *dev = virtio_pci_get_dev(hw);
> - uint8_t pos;
> struct virtio_pci_cap cap;
> + off_t pos;
> int ret;
>
> if (rte_pci_map_device(pci_dev)) {
> @@ -632,72 +601,25 @@ virtio_read_caps(struct rte_pci_device *pci_dev,
> struct virtio_hw *hw)
> return -1;
> }
>
> - ret = rte_pci_read_config(pci_dev, &pos, 1, PCI_CAPABILITY_LIST);
> - if (ret != 1) {
> - PMD_INIT_LOG(DEBUG,
> - "failed to read pci capability list, ret %d", ret);
> - return -1;
> - }
> -
> - while (pos) {
> - ret = rte_pci_read_config(pci_dev, &cap, 2, pos);
> - if (ret != 2) {
> - PMD_INIT_LOG(DEBUG,
> - "failed to read pci cap at pos: %x ret %d",
> - pos, ret);
> - break;
> - }
> -
> - if (cap.cap_vndr == PCI_CAP_ID_MSIX) {
> - /* Transitional devices would also have this capability,
> - * that's why we also check if msix is enabled.
> - * 1st byte is cap ID; 2nd byte is the position of next
> - * cap; next two bytes are the flags.
> - */
> - uint16_t flags;
> -
> - ret = rte_pci_read_config(pci_dev, &flags, sizeof(flags),
> - pos + 2);
> - if (ret != sizeof(flags)) {
> - PMD_INIT_LOG(DEBUG,
> - "failed to read pci cap at pos:"
> - " %x ret %d", pos + 2, ret);
> - break;
> - }
> -
> - if (flags & PCI_MSIX_ENABLE)
> - dev->msix_status = VIRTIO_MSIX_ENABLED;
> - else
> - dev->msix_status = VIRTIO_MSIX_DISABLED;
> - }
> -
> - if (cap.cap_vndr != PCI_CAP_ID_VNDR) {
> - PMD_INIT_LOG(DEBUG,
> - "[%2x] skipping non VNDR cap id: %02x",
> - pos, cap.cap_vndr);
> - goto next;
> - }
> -
> - ret = rte_pci_read_config(pci_dev, &cap, sizeof(cap), pos);
> - if (ret != sizeof(cap)) {
> - PMD_INIT_LOG(DEBUG,
> - "failed to read pci cap at pos: %x ret %d",
> - pos, ret);
> - break;
> - }
> + /*
> + * Transitional devices would also have this capability,
> + * that's why we also check if msix is enabled.
> + */
> + dev->msix_status = vtpci_msix_detect(pci_dev);
>
> + pos = rte_pci_find_capability(pci_dev, PCI_CAP_ID_VNDR);
> + if (pos > 0 && rte_pci_read_config(pci_dev, &cap, sizeof(cap), pos)
> == sizeof(cap)) {
> PMD_INIT_LOG(DEBUG,
> "[%2x] cfg type: %u, bar: %u, offset: %04x, len: %u",
> - pos, cap.cfg_type, cap.bar, cap.offset, cap.length);
> + (unsigned int)pos, cap.cfg_type, cap.bar, cap.offset,
> cap.length);
>
Same comment about the vendor cap.
Thanks,
Chenbo
> switch (cap.cfg_type) {
> case VIRTIO_PCI_CAP_COMMON_CFG:
> dev->common_cfg = get_cfg_addr(pci_dev, &cap);
> break;
> case VIRTIO_PCI_CAP_NOTIFY_CFG:
> - ret = rte_pci_read_config(pci_dev,
> - &dev->notify_off_multiplier,
> - 4, pos + sizeof(cap));
> + ret = rte_pci_read_config(pci_dev, &dev-
> >notify_off_multiplier,
> + 4, pos + sizeof(cap));
> if (ret != 4)
> PMD_INIT_LOG(DEBUG,
> "failed to read notify_off_multiplier,
> ret %d",
> @@ -712,9 +634,6 @@ virtio_read_caps(struct rte_pci_device *pci_dev,
> struct virtio_hw *hw)
> dev->isr = get_cfg_addr(pci_dev, &cap);
> break;
> }
> -
> -next:
> - pos = cap.cap_next;
> }
>
> if (dev->common_cfg == NULL || dev->notify_base == NULL ||
> diff --git a/lib/pci/rte_pci.h b/lib/pci/rte_pci.h
> index aab761b918..49fd5b1d02 100644
> --- a/lib/pci/rte_pci.h
> +++ b/lib/pci/rte_pci.h
> @@ -28,13 +28,24 @@ extern "C" {
> #define RTE_PCI_CFG_SPACE_SIZE 256
> #define RTE_PCI_CFG_SPACE_EXP_SIZE 4096
>
> +#define RTE_PCI_STD_HEADER_SIZEOF 64
> +
> +/* Standard register offsets in the PCI configuration space */
> #define RTE_PCI_VENDOR_ID 0x00 /* 16 bits */
> #define RTE_PCI_DEVICE_ID 0x02 /* 16 bits */
> #define RTE_PCI_COMMAND 0x04 /* 16 bits */
> +#define RTE_PCI_STATUS 0x06 /* 16 bits */
> +#define RTE_PCI_CAPABILITY_LIST 0x34 /* 32 bits */
>
> /* PCI Command Register */
> #define RTE_PCI_COMMAND_MASTER 0x4 /* Bus Master Enable */
>
> +/* PCI Status Register (RTE_PCI_STATUS) */
> +#define RTE_PCI_STATUS_CAP_LIST 0x10 /* Support Capability List
> */
> +
> +/* Capability registers (RTE_PCI_CAPABILITY_LIST) */
> +#define RTE_PCI_CAP_SIZEOF 4
> +
> /* PCI Express capability registers */
> #define RTE_PCI_EXP_DEVCTL 8 /* Device Control */
>
> --
> 2.41.0
next prev parent reply other threads:[~2023-09-07 12:43 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-03 7:50 [PATCH 00/14] Cleanup PCI(e) drivers David Marchand
2023-08-03 7:50 ` [PATCH 01/14] drivers: remove duplicated PCI master control David Marchand
2023-08-03 9:45 ` Bruce Richardson
2023-10-07 2:53 ` fengchengwen
2023-08-03 7:50 ` [PATCH 02/14] bus/pci: add const to some experimental API David Marchand
2023-08-03 9:46 ` Bruce Richardson
2023-08-03 11:50 ` David Marchand
2023-08-03 7:50 ` [PATCH 03/14] bus/pci: find PCI capability David Marchand
2023-08-03 9:49 ` Bruce Richardson
2023-08-03 9:52 ` Bruce Richardson
2023-08-03 11:49 ` David Marchand
2023-08-03 7:50 ` [PATCH 04/14] pci: define some capability constants David Marchand
2023-08-03 9:51 ` Bruce Richardson
2023-08-03 7:50 ` [PATCH 05/14] pci: define some MSIX constants David Marchand
2023-08-03 9:53 ` Bruce Richardson
2023-08-03 7:50 ` [PATCH 06/14] pci: define some command constants David Marchand
2023-08-03 9:57 ` Bruce Richardson
2023-08-03 11:51 ` David Marchand
2023-08-08 9:20 ` David Marchand
2023-08-08 10:08 ` Bruce Richardson
2023-08-22 19:23 ` Adam Hassick
2023-08-03 7:50 ` [PATCH 07/14] pci: define some BAR constants David Marchand
2023-08-03 9:58 ` Bruce Richardson
2023-08-03 7:50 ` [PATCH 08/14] pci: define some PM constants David Marchand
2023-08-03 9:59 ` Bruce Richardson
2023-08-03 7:50 ` [PATCH 09/14] pci: define some PCIe constants David Marchand
2023-08-03 10:01 ` Bruce Richardson
2023-08-03 7:50 ` [PATCH 10/14] pci: define some extended capability constants David Marchand
2023-08-03 7:50 ` [PATCH 11/14] pci: define some ACS constants David Marchand
2023-08-03 7:50 ` [PATCH 12/14] pci: define some PRI constants David Marchand
2023-08-03 7:50 ` [PATCH 13/14] pci: define some AER constants David Marchand
2023-08-03 7:50 ` [PATCH 14/14] devtools: forbid inclusion of Linux header for PCI David Marchand
2023-08-03 10:03 ` [PATCH 00/14] Cleanup PCI(e) drivers Bruce Richardson
2023-08-21 11:35 ` [PATCH v2 00/15] " David Marchand
2023-08-21 11:35 ` [PATCH v2 01/15] drivers: remove duplicated PCI master control David Marchand
2023-09-06 13:02 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 02/15] bus/pci: add const to some experimental API David Marchand
2023-08-21 16:14 ` Tyler Retzlaff
2023-09-06 13:02 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 03/15] bus/pci: rework MSIX discovery with VFIO David Marchand
2023-09-06 13:03 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 04/15] bus/pci: find PCI capability David Marchand
2023-09-07 12:43 ` Xia, Chenbo [this message]
2023-09-14 12:29 ` David Marchand
2023-09-19 2:19 ` Xia, Chenbo
2023-09-19 9:00 ` David Marchand
2023-08-21 11:35 ` [PATCH v2 05/15] pci: define some capability constants David Marchand
2023-09-07 13:15 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 06/15] pci: define some MSIX constants David Marchand
2023-09-07 13:15 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 07/15] pci: define some command constants David Marchand
2023-09-07 13:15 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 08/15] pci: define some BAR constants David Marchand
2023-09-07 13:16 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 09/15] pci: define some PM constants David Marchand
2023-09-07 13:16 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 10/15] pci: define some PCIe constants David Marchand
2023-09-07 13:16 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 11/15] pci: define some extended capability constants David Marchand
2023-09-07 13:23 ` Xia, Chenbo
2023-08-21 11:35 ` [PATCH v2 12/15] pci: define some ACS constants David Marchand
2023-08-21 11:35 ` [PATCH v2 13/15] pci: define some PRI constants David Marchand
2023-08-21 11:35 ` [PATCH v2 14/15] pci: define some AER constants David Marchand
2023-08-21 11:35 ` [PATCH v2 15/15] devtools: forbid inclusion of Linux header for PCI David Marchand
2023-08-21 16:24 ` Tyler Retzlaff
2023-09-07 13:33 ` Xia, Chenbo
2023-08-22 15:30 ` [PATCH v2 00/15] Cleanup PCI(e) drivers Patrick Robb
2023-08-22 16:09 ` [PATCH 00/14] " Adam Hassick
2023-08-22 16:48 ` Adam Hassick
2023-08-24 15:44 ` Adam Hassick
2023-09-14 12:35 ` [PATCH v3 00/15] " David Marchand
2023-09-14 12:36 ` [PATCH v3 01/15] drivers: remove duplicated PCI master control David Marchand
2023-09-14 12:36 ` [PATCH v3 02/15] bus/pci: add const to some experimental API David Marchand
2023-09-14 12:36 ` [PATCH v3 03/15] bus/pci: rework MSIX discovery with VFIO David Marchand
2023-09-14 12:36 ` [PATCH v3 04/15] bus/pci: find PCI capability David Marchand
2023-09-19 2:33 ` Xia, Chenbo
2023-09-14 12:36 ` [PATCH v3 05/15] pci: define some capability constants David Marchand
2023-09-15 16:27 ` Sevincer, Abdullah
2023-09-14 12:36 ` [PATCH v3 06/15] pci: define some MSIX constants David Marchand
2023-09-14 12:36 ` [PATCH v3 07/15] pci: define some command constants David Marchand
2023-09-14 12:36 ` [PATCH v3 08/15] pci: define some BAR constants David Marchand
2023-09-14 12:36 ` [PATCH v3 09/15] pci: define some PM constants David Marchand
2023-09-14 12:36 ` [PATCH v3 10/15] pci: define some PCIe constants David Marchand
2023-09-15 16:26 ` Sevincer, Abdullah
2023-09-14 12:36 ` [PATCH v3 11/15] pci: define some extended capability constants David Marchand
2023-09-15 16:27 ` Sevincer, Abdullah
2023-09-14 12:36 ` [PATCH v3 12/15] pci: define some ACS constants David Marchand
2023-09-15 16:25 ` Sevincer, Abdullah
2023-09-19 2:35 ` Xia, Chenbo
2023-09-14 12:36 ` [PATCH v3 13/15] pci: define some PRI constants David Marchand
2023-09-15 16:21 ` Sevincer, Abdullah
2023-09-19 2:36 ` Xia, Chenbo
2023-09-14 12:36 ` [PATCH v3 14/15] pci: define some AER constants David Marchand
2023-09-15 16:26 ` Sevincer, Abdullah
2023-09-19 2:36 ` Xia, Chenbo
2023-09-14 12:36 ` [PATCH v3 15/15] devtools: forbid inclusion of Linux header for PCI David Marchand
2023-09-15 15:14 ` [PATCH v3 00/15] Cleanup PCI(e) drivers Stephen Hemminger
2023-09-19 12:41 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CH3PR11MB836217E8783F4E3286B74A1F9CEEA@CH3PR11MB8362.namprd11.prod.outlook.com \
--to=chenbo.xia@intel.com \
--cc=anatoly.burakov@intel.com \
--cc=bruce.richardson@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=grive@u256.net \
--cc=jeroendb@google.com \
--cc=jianjay.zhou@huawei.com \
--cc=joshwash@google.com \
--cc=julien_dpdk@jaube.fr \
--cc=junfeng.guo@intel.com \
--cc=liudongdong3@huawei.com \
--cc=maxime.coquelin@redhat.com \
--cc=nipun.gupta@amd.com \
--cc=rahul.lakkireddy@chelsio.com \
--cc=rushilg@google.com \
--cc=thomas@monjalon.net \
--cc=timothy.mcdaniel@intel.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).