From: Shahaf Shuler <shahafs@mellanox.com>
To: Dekel Peled <dekelp@mellanox.com>, Yongseok Koh <yskoh@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, Ori Kam <orika@mellanox.com>
Subject: Re: [dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap to Direct Verbs
Date: Mon, 29 Oct 2018 10:03:21 +0000 [thread overview]
Message-ID: <DB7PR05MB4426D6B83D251714F2D1DF33C3F30@DB7PR05MB4426.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <1540498108-18358-7-git-send-email-dekelp@mellanox.com>
Thursday, October 25, 2018 11:08 PM, Dekel Peled:
> Subject: [dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap to
> Direct Verbs
>
> This patch implements the encap and decap actions, using raw data, in DV
> flow for MLX5 PMD.
>
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow.h | 12 ++-
> drivers/net/mlx5/mlx5_flow_dv.c | 227
> ++++++++++++++++++++++++++++++++++++++--
> 2 files changed, 224 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 2d73a05..92ba111 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -96,15 +96,19 @@
> #define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23) #define
> MLX5_FLOW_ACTION_NVGRE_ENCAP (1u << 24) #define
> MLX5_FLOW_ACTION_NVGRE_DECAP (1u << 25)
> +#define MLX5_FLOW_ACTION_RAW_ENCAP (1u << 26) #define
> +MLX5_FLOW_ACTION_RAW_DECAP (1u << 27)
>
> #define MLX5_FLOW_FATE_ACTIONS \
> (MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
> MLX5_FLOW_ACTION_RSS)
>
> -#define MLX5_FLOW_ENCAP_ACTIONS \
> - (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> MLX5_FLOW_ACTION_NVGRE_ENCAP)
> +#define MLX5_FLOW_ENCAP_ACTIONS
> (MLX5_FLOW_ACTION_VXLAN_ENCAP | \
> + MLX5_FLOW_ACTION_NVGRE_ENCAP | \
> + MLX5_FLOW_ACTION_RAW_ENCAP)
>
> -#define MLX5_FLOW_DECAP_ACTIONS \
> - (MLX5_FLOW_ACTION_VXLAN_DECAP |
> MLX5_FLOW_ACTION_NVGRE_DECAP)
> +#define MLX5_FLOW_DECAP_ACTIONS
> (MLX5_FLOW_ACTION_VXLAN_DECAP | \
> + MLX5_FLOW_ACTION_NVGRE_DECAP | \
> + MLX5_FLOW_ACTION_RAW_DECAP)
>
> #ifndef IPPROTO_MPLS
> #define IPPROTO_MPLS 137
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c index d7d0c6b..ca75645 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -186,6 +186,82 @@
> }
>
> /**
> + * Validate the raw encap action.
> + *
> + * @param[in] action_flags
> + * Holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the encap action.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_raw_encap(uint64_t action_flags,
> + const struct rte_flow_action *action,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + if (!(action->conf))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> action,
> + "configuration cannot be null");
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can't drop and encap in same
> flow");
> + if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can only have a single encap"
> + " action in a flow");
> + /* encap without preceding decap is not supported for ingress */
> + if (attr->ingress && !(action_flags &
> MLX5_FLOW_ACTION_RAW_DECAP))
> + return rte_flow_error_set(error, ENOTSUP,
> +
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> + NULL,
> + "encap action not supported for "
> + "ingress");
The error message doesn't seems informative enough.
> + return 0;
> +}
> +
> +/**
> + * Validate the raw decap action.
> + *
> + * @param[in] action_flags
> + * Holds the actions detected until now.
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_raw_decap(uint64_t action_flags,
> + struct rte_flow_error *error)
> +{
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can't drop and decap in same
> flow");
> + if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can't have encap action before"
> + " decap action");
> + if (action_flags & MLX5_FLOW_DECAP_ACTIONS)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can only have a single decap"
> + " action in a flow");
Just like you don't allow to do only encap w/o decap on ingress, on egress we cannot do only decap w/o a subsequent encap.
> + return 0;
> +}
> +
> +/**
> * Get the size of specific rte_flow_item_type
> *
> * @param[in] item_type
> @@ -396,6 +472,7 @@
> /**
> * Convert L2 encap action to DV specification.
> * Used for VXLAN and NVGRE encap actions.
> + * Also used for raw encap action without preceding decap.
> *
> * @param[in] dev
> * Pointer to rte_eth_dev structure.
> @@ -414,23 +491,34 @@
> {
> struct ibv_flow_action *verbs_action = NULL;
> const struct rte_flow_item *encap_data;
> + const struct rte_flow_action_raw_encap *raw_encap_data;
This one can be declared inside the if statement
> struct priv *priv = dev->data->dev_private;
> uint8_t buf[MLX5_ENCAP_MAX_LEN];
> + uint8_t *buf_ptr = buf;
Why you need this buf_ptr? Compilation issue with the fixed sized array of buf?
> size_t size = 0;
> int convert_result = 0;
>
> - if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
> - encap_data = ((const struct rte_flow_action_vxlan_encap *)
> + if (action->type == RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
> + raw_encap_data =
> + (const struct rte_flow_action_raw_encap *)action-
> >conf;
> + buf_ptr = raw_encap_data->data;
> + size = raw_encap_data->size;
> + } else {
> + if (action->type ==
> RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
> + encap_data =
> + ((const struct rte_flow_action_vxlan_encap
> *)
> action->conf)->definition;
> - else
> - encap_data = ((const struct rte_flow_action_nvgre_encap *)
> + else
> + encap_data =
> + ((const struct rte_flow_action_nvgre_encap
> *)
> action->conf)->definition;
> - convert_result = flow_dv_convert_encap_data(encap_data, buf,
> - &size, error);
> - if (convert_result)
> - return NULL;
> + convert_result = flow_dv_convert_encap_data(encap_data,
> buf,
> + &size, error);
> + if (convert_result)
> + return NULL;
> + }
> verbs_action = mlx5_glue-
> >dv_create_flow_action_packet_reformat
> - (priv->ctx, size, (size ? buf : NULL),
> + (priv->ctx, size, (size ? buf_ptr : NULL),
>
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
> MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
> if (!verbs_action)
> @@ -472,6 +560,50 @@
> }
>
> /**
> + * Convert raw decap/encap (L3 tunnel) action to DV specification.
> + *
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[in] attr
> + * Pointer to the flow attributes.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_action_raw_encap(struct rte_eth_dev *dev,
I would call it flow_dv_create_action_packet_reformat, as this is the only case this function is being called.
For raw_encap only you will use the l2_encap function.
> + const struct rte_flow_action *action,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *verbs_action = NULL;
> + const struct rte_flow_action_raw_encap *encap_data;
> + struct priv *priv = dev->data->dev_private;
> + enum mlx5dv_flow_action_packet_reformat_type reformat_type;
> + enum mlx5dv_flow_table_type ft_type;
> +
> + encap_data = (const struct rte_flow_action_raw_encap *)action-
> >conf;
> + reformat_type = attr->egress ?
> +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TU
> NNEL :
> +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_T
> O_L2;
> + ft_type = attr->egress ?
> + MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
> + MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
> + verbs_action = mlx5_glue-
> >dv_create_flow_action_packet_reformat
> + (priv->ctx, encap_data->size,
> + (encap_data->size ? encap_data->data :
> NULL),
> + reformat_type, ft_type);
> + if (!verbs_action)
> + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create encap action");
> + return verbs_action;
> +}
> +
> +/**
> * Verify the @p attributes will be correctly understood by the NIC and store
> * them in the @p flow if everything is correct.
> *
> @@ -726,7 +858,6 @@
>
> RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP ?
>
> MLX5_FLOW_ACTION_VXLAN_ENCAP :
>
> MLX5_FLOW_ACTION_NVGRE_ENCAP;
> -
> ++actions_n;
> break;
> case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> @@ -740,7 +871,23 @@
>
> RTE_FLOW_ACTION_TYPE_VXLAN_DECAP ?
>
> MLX5_FLOW_ACTION_VXLAN_DECAP :
>
> MLX5_FLOW_ACTION_NVGRE_DECAP;
> -
> + ++actions_n;
> + break;
> + case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
> + ret =
> flow_dv_validate_action_raw_encap(action_flags,
> + actions, attr,
> + error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_RAW_ENCAP;
> + ++actions_n;
> + break;
> + case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
> + ret =
> flow_dv_validate_action_raw_decap(action_flags,
> + error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_RAW_DECAP;
> ++actions_n;
> break;
> default:
> @@ -1550,6 +1697,64 @@
> MLX5_FLOW_ACTION_NVGRE_DECAP;
> actions_n++;
> break;
> + case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
> + /* Handle encap action with preceding decap */
> + if (flow->actions & MLX5_FLOW_ACTION_RAW_DECAP) {
> + dev_flow->dv.actions[actions_n].type =
> +
> MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_action_raw_encap
> + (dev, action,
> + attr, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.verbs_action =
> + dev_flow->dv.actions[actions_n].action;
> + } else {
> + /* Handle encap action without preceding decap */
> + dev_flow->dv.actions[actions_n].type =
> +
> MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_action_l2_encap
> + (dev, action, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.verbs_action =
> + dev_flow->dv.actions[actions_n].action;
> + }
> + flow->actions |= MLX5_FLOW_ACTION_RAW_ENCAP;
> + actions_n++;
> + break;
> + case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
> + /* Check if this decap action is followed by encap. */
> + for (; action->type != RTE_FLOW_ACTION_TYPE_END &&
> + action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP;
> + action++) {
> + }
> + /* Handle decap action only if it isn't followed by encap */
> + if (action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
> + /* on egress, decap without following encap is error.
> */
> + if (attr->egress)
> + return rte_flow_error_set
> + (error, ENOTSUP,
> +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> + NULL,
> + "decap action not supported for "
> + "egress");
This check should have been performed on the validate stage.
> + dev_flow->dv.actions[actions_n].type =
> +
> MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_action_l2_decap
> + (dev, action, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.verbs_action =
> + dev_flow->dv.actions[actions_n].action;
> + actions_n++;
> + }
> + /* If decap is followed by encap, handle it at encap case. */
> + flow->actions |= MLX5_FLOW_ACTION_RAW_DECAP;
> + break;
> default:
> break;
> }
> --
> 1.8.3.1
next prev parent reply other threads:[~2018-10-29 10:03 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-27 14:50 [dpdk-dev] [PATCH 0/4] support DV encap and decap actions Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-02 1:02 ` Yongseok Koh
2018-10-03 6:59 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 2/4] net/mlx5: add definitions for DV encap and decap Dekel Peled
2018-10-03 2:58 ` Yongseok Koh
2018-10-03 7:27 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 3/4] net/mlx5: add DV encap L2 and L3 operations Dekel Peled
2018-10-03 6:58 ` Yongseok Koh
2018-10-03 8:35 ` Dekel Peled
2018-10-03 9:32 ` Yongseok Koh
2018-10-03 11:35 ` Dekel Peled
2018-10-03 11:47 ` Dekel Peled
2018-10-03 13:55 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 4/4] net/mlx5: add DV decap " Dekel Peled
2018-10-03 7:07 ` Yongseok Koh
2018-10-03 16:14 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 0/4] add support of Direct Verbs encap and decap actions Dekel Peled
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 " Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 " Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 0/6] add encap and decap actions to Direct Verbs flow in MLX5 PMD Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 14:42 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 0/7] " Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 " Dekel Peled
2018-11-01 12:51 ` Shahaf Shuler
2018-11-01 17:17 ` Ferruh Yigit
2018-11-04 7:12 ` Shahaf Shuler
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 1/7] net/mlx5: add flow action functions to glue Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 2/7] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 3/7] net/mlx5: add VXLAN decap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 4/7] net/mlx5: add NVGRE encap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 5/7] net/mlx5: add NVGRE decap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 6/7] net/mlx5: add raw data encap decap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 7/7] net/mlx5: add caching of encap decap actions Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 1/7] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 2/7] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 8:22 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 3/7] net/mlx5: add VXLAN decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 4/7] net/mlx5: add NVGRE encap " Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:13 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 5/7] net/mlx5: add NVGRE decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 6/7] net/mlx5: add raw data encap decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 7/7] net/mlx5: add caching of encap decap actions Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:15 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 1/6] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 2/6] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:44 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap " Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:46 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 4/6] net/mlx5: add NVGRE encap " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 5/6] net/mlx5: add NVGRE decap " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap " Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler [this message]
2018-10-29 16:54 ` Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-11 17:05 ` Yongseok Koh
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-10 21:22 ` Yongseok Koh
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-10 0:36 ` Yongseok Koh
2018-10-10 7:41 ` Dekel Peled
2018-10-10 0:38 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-10 0:40 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-10 0:43 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-10 0:45 ` Yongseok Koh
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-08 19:43 ` Yongseok Koh
2018-10-09 18:49 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-08 20:46 ` Yongseok Koh
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-08 21:04 ` Yongseok Koh
2018-10-09 15:55 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-08 21:19 ` Yongseok Koh
2018-10-09 16:56 ` Dekel Peled
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DB7PR05MB4426D6B83D251714F2D1DF33C3F30@DB7PR05MB4426.eurprd05.prod.outlook.com \
--to=shahafs@mellanox.com \
--cc=dekelp@mellanox.com \
--cc=dev@dpdk.org \
--cc=orika@mellanox.com \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).