From: "David Harton (dharton)" <dharton@cisco.com>
To: Liang-Min Larry Wang <liang-min.wang@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access device info
Date: Wed, 10 Jun 2015 15:21:03 +0000 [thread overview]
Message-ID: <E4655AD1E443BD44A5DC6E46A0FE7202317953CE@xmb-aln-x05.cisco.com> (raw)
In-Reply-To: <1433948996-9716-2-git-send-email-liang-min.wang@intel.com>
Sorry for spam and providing feedback here again.
> -----Original Message-----
> From: Liang-Min Larry Wang [mailto:liang-min.wang@intel.com]
> Sent: Wednesday, June 10, 2015 11:10 AM
> To: dev@dpdk.org
> Cc: Andrew Harvey (agh); Roger Melton (rmelton); David Harton (dharton);
> Liang-Min Larry Wang
> Subject: [PATCH v4 1/4] ethdev: add apis to support access device info
>
> add new apis:
> - rte_eth_dev_default_mac_addr_set
> - rte_eth_dev_reg_leng
> - rte_eth_dev_reg_info
> - rte_eth_dev_eeprom_leng
<dharton> I know this is a bit of a nit but please consider changing "leng" to "length".
Some places already use "length" in the diffs below so using length would be consistent.
> - rte_eth_dev_get_eeprom
> - rte_eth_dev_set_eeprom
> - rte_eth_dev_get_ringparam
> - rte_eth_dev_set_ringparam
>
> to enable reading device parameters (mac-addr, register, eeprom, ring)
> based upon ethtool alike data parameter specification.
>
> Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
> ---
> lib/librte_ether/Makefile | 1 +
> lib/librte_ether/rte_eth_dev_info.h | 80 +++++++++++++++++
> lib/librte_ether/rte_ethdev.c | 159
> +++++++++++++++++++++++++++++++++
> lib/librte_ether/rte_ethdev.h | 158
> ++++++++++++++++++++++++++++++++
> lib/librte_ether/rte_ether_version.map | 8 ++
> 5 files changed, 406 insertions(+)
> create mode 100644 lib/librte_ether/rte_eth_dev_info.h
>
> diff --git a/lib/librte_ether/Makefile b/lib/librte_ether/Makefile index
> c0e5768..05209e9 100644
> --- a/lib/librte_ether/Makefile
> +++ b/lib/librte_ether/Makefile
> @@ -51,6 +51,7 @@ SRCS-y += rte_ethdev.c SYMLINK-y-include += rte_ether.h
> SYMLINK-y-include += rte_ethdev.h SYMLINK-y-include += rte_eth_ctrl.h
> +SYMLINK-y-include += rte_eth_dev_info.h
>
> # this lib depends upon:
> DEPDIRS-y += lib/librte_eal lib/librte_mempool lib/librte_ring
> lib/librte_mbuf diff --git a/lib/librte_ether/rte_eth_dev_info.h
> b/lib/librte_ether/rte_eth_dev_info.h
> new file mode 100644
> index 0000000..002c4b5
> --- /dev/null
> +++ b/lib/librte_ether/rte_eth_dev_info.h
> @@ -0,0 +1,80 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2015 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above
> copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _RTE_ETH_DEV_INFO_H_
> +#define _RTE_ETH_DEV_INFO_H_
> +
> +
> +/*
> + * Placeholder for accessing device registers */ struct
> +rte_dev_reg_info {
> + void *buf; /**< Buffer for register */
> + uint32_t offset; /**< Offset for 1st register to fetch */
> + uint32_t leng; /**< Number of registers to fetch */
> + uint32_t version; /**< Device version */ };
> +
> +/*
> + * Placeholder for accessing device eeprom */ struct
> +rte_dev_eeprom_info {
> + void *buf; /**< Buffer for eeprom */
> + uint32_t offset; /**< Offset for 1st eeprom location to access */
> + uint32_t leng; /**< Length of eeprom region to access */
> + uint32_t magic; /**< Device ID */
> +};
> +
> +/*
> + * Placeholder for accessing device ring parameters */ struct
> +rte_dev_ring_info {
> + uint32_t rx_pending; /**< Number of outstanding Rx ring */
> + uint32_t tx_pending; /**< Number of outstanding Tx ring */
> + uint32_t rx_max_pending; /**< Maximum number of outstanding Rx ring
> */
> + uint32_t tx_max_pending; /**< Maximum number of outstanding Tx ring
> */
> +};
> +
> +/*
> + * A data structure captures information as defined in struct
> +ifla_vf_info
> + * for user-space api
> + */
> +struct rte_dev_vf_info {
> + uint32_t vf;
> + uint8_t mac[ETHER_ADDR_LEN];
> + uint32_t vlan;
> + uint32_t tx_rate;
> + uint32_t spoofchk;
> +};
> +
> +#endif /* _RTE_ETH_DEV_INFO_H_ */
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index 5a94654..186e85c 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -2751,6 +2751,32 @@ rte_eth_dev_mac_addr_remove(uint8_t port_id, struct
> ether_addr *addr) }
>
> int
> +rte_eth_dev_default_mac_addr_set(uint8_t port_id, struct ether_addr
> +*addr) {
> + struct rte_eth_dev *dev;
> + const int index = 0;
> + const uint32_t pool = 0;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + dev = &rte_eth_devices[port_id];
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mac_addr_remove, -ENOTSUP);
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mac_addr_add, -ENOTSUP);
> +
> + /* Update NIC default MAC address*/
> + (*dev->dev_ops->mac_addr_remove)(dev, index);
> + (*dev->dev_ops->mac_addr_add)(dev, addr, index, pool);
> +
> + /* Update default address in NIC data structure */
> + ether_addr_copy(addr, &dev->data->mac_addrs[index]);
> +
> + return 0;
> +}
> +
> +int
> rte_eth_dev_set_vf_rxmode(uint8_t port_id, uint16_t vf,
> uint16_t rx_mode, uint8_t on)
> {
> @@ -3627,3 +3653,136 @@ rte_eth_remove_tx_callback(uint8_t port_id,
> uint16_t queue_id,
> /* Callback wasn't found. */
> return -EINVAL;
> }
> +
> +int
> +rte_eth_dev_reg_leng(uint8_t port_id)
> +{
> + struct rte_eth_dev *dev;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + if ((dev= &rte_eth_devices[port_id]) == NULL) {
> + PMD_DEBUG_TRACE("Invalid port device\n");
> + return -ENODEV;
> + }
> +
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_reg_length, -ENOTSUP);
> + return (*dev->dev_ops->get_reg_length)(dev);
> +}
> +
> +int
> +rte_eth_dev_reg_info(uint8_t port_id, struct rte_dev_reg_info *info) {
> + struct rte_eth_dev *dev;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + if ((dev= &rte_eth_devices[port_id]) == NULL) {
> + PMD_DEBUG_TRACE("Invalid port device\n");
> + return -ENODEV;
> + }
> +
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_reg, -ENOTSUP);
> + return (*dev->dev_ops->get_reg)(dev, info); }
> +
> +int
> +rte_eth_dev_eeprom_leng(uint8_t port_id) {
> + struct rte_eth_dev *dev;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + if ((dev= &rte_eth_devices[port_id]) == NULL) {
> + PMD_DEBUG_TRACE("Invalid port device\n");
> + return -ENODEV;
> + }
> +
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_eeprom_length, -ENOTSUP);
> + return (*dev->dev_ops->get_eeprom_length)(dev);
> +}
> +
> +int
> +rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info
> +*info) {
> + struct rte_eth_dev *dev;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + if ((dev= &rte_eth_devices[port_id]) == NULL) {
> + PMD_DEBUG_TRACE("Invalid port device\n");
> + return -ENODEV;
> + }
> +
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_eeprom, -ENOTSUP);
> + return (*dev->dev_ops->get_eeprom)(dev, info); }
> +
> +int
> +rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info
> +*info) {
> + struct rte_eth_dev *dev;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + if ((dev= &rte_eth_devices[port_id]) == NULL) {
> + PMD_DEBUG_TRACE("Invalid port device\n");
> + return -ENODEV;
> + }
> +
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_eeprom, -ENOTSUP);
> + return (*dev->dev_ops->set_eeprom)(dev, info); }
> +
> +int
> +rte_eth_dev_get_ringparam(uint8_t port_id, struct rte_dev_ring_info
> +*info) {
> + struct rte_eth_dev *dev;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + if ((dev= &rte_eth_devices[port_id]) == NULL) {
> + PMD_DEBUG_TRACE("Invalid port device\n");
> + return -ENODEV;
> + }
> +
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_ringparam, -ENOTSUP);
> + return (*dev->dev_ops->get_ringparam)(dev, info); }
> +
> +int
> +rte_eth_dev_set_ringparam(uint8_t port_id, struct rte_dev_ring_info
> +*info) {
> + struct rte_eth_dev *dev;
> +
> + if (!rte_eth_dev_is_valid_port(port_id)) {
> + PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
> + return -ENODEV;
> + }
> +
> + if ((dev= &rte_eth_devices[port_id]) == NULL) {
> + PMD_DEBUG_TRACE("Invalid port device\n");
> + return -ENODEV;
> + }
> +
> + FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_ringparam, -ENOTSUP);
> + return (*dev->dev_ops->set_ringparam)(dev, info); }
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index 16dbe00..8f99f0d 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -182,6 +182,7 @@ extern "C" {
> #include <rte_devargs.h>
> #include "rte_ether.h"
> #include "rte_eth_ctrl.h"
> +#include "rte_eth_dev_info.h"
>
> struct rte_mbuf;
>
> @@ -1228,6 +1229,31 @@ typedef int (*eth_udp_tunnel_del_t)(struct
> rte_eth_dev *dev,
> struct rte_eth_udp_tunnel *tunnel_udp); /**<
> @internal Delete tunneling UDP info */
>
> +typedef int (*eth_get_reg_length_t)(struct rte_eth_dev *dev); /**<
> +@internal Retrieve device register count */
> +
> +typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev,
> + struct rte_dev_reg_info *info);
> +/**< @internal Retrieve registers */
> +
> +typedef int (*eth_get_eeprom_length_t)(struct rte_eth_dev *dev); /**<
> +@internal Retrieve eeprom size */
> +
> +typedef int (*eth_get_eeprom_t)(struct rte_eth_dev *dev,
> + struct rte_dev_eeprom_info *info);
> +/**< @internal Retrieve eeprom data */
> +
> +typedef int (*eth_set_eeprom_t)(struct rte_eth_dev *dev,
> + struct rte_dev_eeprom_info *info);
> +/**< @internal Program eeprom data */
> +
> +typedef int (*eth_get_ringparam_t)(struct rte_eth_dev *dev,
> + struct rte_dev_ring_info *info);
> +/**< @internal Retrieve device ring descriptor */
> +
> +typedef int (*eth_set_ringparam_t)(struct rte_eth_dev *dev,
> + struct rte_dev_ring_info *info);
> +/**< @internal Set device ring descriptor */
>
> #ifdef RTE_NIC_BYPASS
>
> @@ -1368,6 +1394,21 @@ struct eth_dev_ops {
> reta_update_t reta_update;
> /** Query redirection table. */
> reta_query_t reta_query;
> +
> + eth_get_reg_length_t get_reg_length;
> + /**< Get # of registers */
> + eth_get_reg_t get_reg;
> + /**< Get registers */
> + eth_get_eeprom_length_t get_eeprom_length;
> + /**< Get eeprom length */
> + eth_get_eeprom_t get_eeprom;
> + /**< Get eeprom data */
> + eth_set_eeprom_t set_eeprom;
> + /**< Set eeprom */
> + eth_get_ringparam_t get_ringparam;
> + /**< Get descriptor ring parameters */
> + eth_set_ringparam_t set_ringparam;
> + /**< Set descriptor ring parameters */
> /* bypass control */
> #ifdef RTE_NIC_BYPASS
> bypass_init_t bypass_init;
> @@ -2982,6 +3023,20 @@ int rte_eth_dev_mac_addr_add(uint8_t port, struct
> ether_addr *mac_addr, int rte_eth_dev_mac_addr_remove(uint8_t port,
> struct ether_addr *mac_addr);
>
> /**
> + * Set the default MAC address.
> + *
> + * @param port
> + * The port identifier of the Ethernet device.
> + * @param mac_addr
> + * New default MAC address.
> + * @return
> + * - (0) if successful, or *mac_addr* didn't exist.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port* invalid.
> + */
> +int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr
> +*mac_addr);
> +
> +/**
> * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet
> device.
> *
> * @param port
> @@ -3611,6 +3666,109 @@ int rte_eth_remove_rx_callback(uint8_t port_id,
> uint16_t queue_id, int rte_eth_remove_tx_callback(uint8_t port_id,
> uint16_t queue_id,
> struct rte_eth_rxtx_callback *user_cb);
>
> +/**
> + * Retrieve number of available registers for access
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @return
> + * - (>=0) number of registers if successful.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port_id* invalid.
> + * - others depends on the specific operations implementation.
> + */
> +int rte_eth_dev_reg_leng(uint8_t port_id);
> +
> +/**
> + * Retrieve device registers and register attributes
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param info
> + * The template includes buffer for register data and attribute to be
> filled.
> + * @return
> + * - (0) if successful.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port_id* invalid.
> + * - others depends on the specific operations implementation.
> + */
> +int rte_eth_dev_reg_info(uint8_t port_id, struct rte_dev_reg_info
> +*info);
> +
> +/**
> + * Retrieve size of device EEPROM
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @return
> + * - (>=0) EEPROM size if successful.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port_id* invalid.
> + * - others depends on the specific operations implementation.
> + */
> +int rte_eth_dev_eeprom_leng(uint8_t port_id);
> +
> +/**
> + * Retrieve EEPROM and EEPROM attribute
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param info
> + * The template includes buffer for return EEPROM data and
> + * EEPROM attributes to be filled.
> + * @return
> + * - (0) if successful.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port_id* invalid.
> + * - others depends on the specific operations implementation.
> + */
> +int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info
> +*info);
> +
> +/**
> + * Program EEPROM with provided data
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param info
> + * The template includes EEPROM data for programming and
> + * EEPROM attributes to be filled
> + * @return
> + * - (0) if successful.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port_id* invalid.
> + * - others depends on the specific operations implementation.
> + */
> +int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info
> +*info);
> +
> +/**
> + * Retrieve device descriptor ring information
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param info
> + * The template includes device ring descriptor usage information.
> + * @return
> + * - (0) if successful.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port_id* invalid.
> + * - others depends on the specific operations implementation.
> + */
> +int rte_eth_dev_get_ringparam(uint8_t port_id, struct rte_dev_ring_info
> +*info);
> +
> +/**
> + * Set device ring descriptor parameters
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param info
> + * The template includes descriptor ring parameters to be set.
> + * @return
> + * - (0) if successful.
> + * - (-ENOTSUP) if hardware doesn't support.
> + * - (-ENODEV) if *port_id* invalid.
> + * - others depends on the specific operations implementation.
> + */
> +int rte_eth_dev_set_ringparam(uint8_t port_id, struct rte_dev_ring_info
> +*info);
> +
> #ifdef __cplusplus
> }
> #endif
> diff --git a/lib/librte_ether/rte_ether_version.map
> b/lib/librte_ether/rte_ether_version.map
> index a2d25a6..1b1e092 100644
> --- a/lib/librte_ether/rte_ether_version.map
> +++ b/lib/librte_ether/rte_ether_version.map
> @@ -102,6 +102,14 @@ DPDK_2.0 {
> rte_eth_tx_queue_setup;
> rte_eth_xstats_get;
> rte_eth_xstats_reset;
> + rte_eth_dev_default_mac_addr_set;
> + rte_eth_dev_reg_leng;
> + rte_eth_dev_reg_info;
> + rte_eth_dev_eeprom_leng;
> + rte_eth_dev_get_eeprom;
> + rte_eth_dev_set_eeprom;
> + rte_eth_dev_get_ringparam;
> + rte_eth_dev_set_ringparam;
>
> local: *;
> };
> --
> 2.1.4
Thanks for these changes as they will prove useful in the user space.
I have no other comments beyond the one above.
Regards,
Dave
next prev parent reply other threads:[~2015-06-10 15:21 UTC|newest]
Thread overview: 148+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-30 0:37 [dpdk-dev] [PATCH 0/2] User-space Ethtool Liang-Min Larry Wang
2015-05-30 0:37 ` [dpdk-dev] [PATCH 1/2] ethdev: add api to set default mac address Liang-Min Larry Wang
2015-05-30 1:57 ` Andrew Harvey (agh)
2015-05-30 0:37 ` [dpdk-dev] [PATCH 2/2] ethtool: add new library to provide ethtool-alike APIs Liang-Min Larry Wang
2015-05-30 15:48 ` Stephen Hemminger
2015-05-30 16:16 ` Wang, Liang-min
2015-05-30 19:26 ` Stephen Hemminger
2015-05-30 19:40 ` Wang, Liang-min
2015-05-31 16:48 ` Stephen Hemminger
2015-05-31 17:30 ` Wang, Liang-min
2015-05-31 18:31 ` Wang, Liang-min
2015-06-01 12:42 ` David Harton (dharton)
2015-06-10 15:09 ` [dpdk-dev] [PATCH v4 0/4] User-space Ethtool Liang-Min Larry Wang
2015-06-10 15:09 ` [dpdk-dev] [PATCH v4 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-10 15:21 ` David Harton (dharton) [this message]
2015-06-11 12:26 ` Ananyev, Konstantin
2015-06-11 12:57 ` Wang, Liang-min
2015-06-11 13:07 ` Ananyev, Konstantin
2015-06-11 21:51 ` Wang, Liang-min
2015-06-12 12:30 ` Ananyev, Konstantin
2015-06-15 13:26 ` Wang, Liang-min
2015-06-15 13:45 ` Ananyev, Konstantin
2015-06-15 14:47 ` Wang, Liang-min
2015-06-15 18:10 ` Ananyev, Konstantin
2015-06-17 17:25 ` Ananyev, Konstantin
2015-06-15 16:05 ` David Harton (dharton)
2015-06-15 18:23 ` Ananyev, Konstantin
2015-06-16 18:15 ` Ananyev, Konstantin
2015-06-11 13:14 ` Ananyev, Konstantin
2015-06-11 13:25 ` Wang, Liang-min
2015-06-10 15:09 ` [dpdk-dev] [PATCH v4 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-10 15:09 ` [dpdk-dev] [PATCH v4 3/4] igb: " Liang-Min Larry Wang
2015-06-10 15:09 ` [dpdk-dev] [PATCH v4 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-06-11 21:43 ` [dpdk-dev] [PATCH v5 0/4] User-space Ethtool Liang-Min Larry Wang
2015-06-11 21:43 ` [dpdk-dev] [PATCH v5 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-11 21:43 ` [dpdk-dev] [PATCH v5 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-11 21:43 ` [dpdk-dev] [PATCH v5 3/4] igb: " Liang-Min Larry Wang
2015-06-11 21:43 ` [dpdk-dev] [PATCH v5 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-06-12 22:03 ` [dpdk-dev] [PATCH v6 0/4] User-space Ethtool Liang-Min Larry Wang
2015-06-12 22:03 ` [dpdk-dev] [PATCH v6 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-13 23:25 ` David Harton (dharton)
2015-06-12 22:03 ` [dpdk-dev] [PATCH v6 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-12 22:03 ` [dpdk-dev] [PATCH v6 3/4] igb: " Liang-Min Larry Wang
2015-06-12 22:03 ` [dpdk-dev] [PATCH v6 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-06-13 0:21 ` [dpdk-dev] [PATCH v6 0/4] User-space Ethtool Andrew Harvey (agh)
2015-06-17 22:22 ` [dpdk-dev] [PATCH v7 " Liang-Min Larry Wang
2015-06-17 22:22 ` [dpdk-dev] [PATCH v7 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-25 13:39 ` Stephen Hemminger
2015-06-25 20:58 ` Wang, Liang-min
2015-06-25 13:44 ` Stephen Hemminger
2015-06-25 21:05 ` Wang, Liang-min
2015-06-17 22:22 ` [dpdk-dev] [PATCH v7 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-25 13:45 ` Stephen Hemminger
2015-06-26 6:26 ` Andrew Harvey (agh)
2015-06-17 22:22 ` [dpdk-dev] [PATCH v7 3/4] igb: " Liang-Min Larry Wang
2015-06-17 22:22 ` [dpdk-dev] [PATCH v7 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-06-18 2:04 ` [dpdk-dev] [PATCH v7 0/4] User-space Ethtool Stephen Hemminger
2015-06-18 12:47 ` Wang, Liang-min
2015-06-23 15:19 ` Wang, Liang-min
2015-06-24 13:55 ` Andrew Harvey (agh)
2015-06-24 17:16 ` David Harton (dharton)
2015-06-26 14:26 ` [dpdk-dev] [PATCH v8 0/5] " Liang-Min Larry Wang
2015-06-26 14:26 ` [dpdk-dev] [PATCH v8 1/5] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-26 16:51 ` Stephen Hemminger
2015-06-26 17:05 ` Wang, Liang-min
2015-06-27 1:21 ` Wang, Liang-min
2015-06-26 14:26 ` [dpdk-dev] [PATCH v8 2/5] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-26 14:26 ` [dpdk-dev] [PATCH v8 3/5] igb: " Liang-Min Larry Wang
2015-06-26 14:26 ` [dpdk-dev] [PATCH v8 4/5] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-06-26 14:26 ` [dpdk-dev] [PATCH v8 5/5] Changed register tables to const Liang-Min Larry Wang
2015-06-26 19:15 ` [dpdk-dev] [PATCH v8 0/5] User-space Ethtool Ananyev, Konstantin
2015-06-27 1:19 ` [dpdk-dev] [PATCH v9 " Liang-Min Larry Wang
2015-06-27 1:19 ` [dpdk-dev] [PATCH v9 1/5] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-27 1:19 ` [dpdk-dev] [PATCH v9 2/5] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-27 1:32 ` Stephen Hemminger
2015-06-27 2:37 ` Wang, Liang-min
2015-06-27 1:34 ` Stephen Hemminger
2015-06-27 2:39 ` Wang, Liang-min
2015-06-27 1:34 ` Stephen Hemminger
2015-06-27 1:19 ` [dpdk-dev] [PATCH v9 3/5] igb: " Liang-Min Larry Wang
2015-06-27 1:35 ` Stephen Hemminger
2015-06-27 1:19 ` [dpdk-dev] [PATCH v9 4/5] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-06-27 1:19 ` [dpdk-dev] [PATCH v9 5/5] ixgbe/igb: changed register tables to const Liang-Min Larry Wang
2015-06-27 1:36 ` Stephen Hemminger
2015-06-27 1:50 ` Wang, Liang-min
2015-06-27 2:40 ` Wang, Liang-min
2015-07-10 12:55 ` Wang, Liang-min
2015-06-27 2:36 ` [dpdk-dev] [PATCH v10 0/4] User-space Ethtool Liang-Min Larry Wang
2015-06-27 2:36 ` [dpdk-dev] [PATCH v10 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-27 2:36 ` [dpdk-dev] [PATCH v10 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-27 2:36 ` [dpdk-dev] [PATCH v10 3/4] igb: " Liang-Min Larry Wang
2015-06-27 2:36 ` [dpdk-dev] [PATCH v10 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-06-27 12:25 ` [dpdk-dev] [PATCH v11 0/4] User-space Ethtool Liang-Min Larry Wang
2015-06-27 12:25 ` [dpdk-dev] [PATCH v11 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-06-27 12:25 ` [dpdk-dev] [PATCH v11 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-06-27 12:25 ` [dpdk-dev] [PATCH v11 3/4] igb: " Liang-Min Larry Wang
2015-06-27 12:25 ` [dpdk-dev] [PATCH v11 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-07-07 17:39 ` [dpdk-dev] [PATCH v12 0/4] User-space Ethtool Liang-Min Larry Wang
2015-07-07 17:39 ` [dpdk-dev] [PATCH v12 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-07-07 17:39 ` [dpdk-dev] [PATCH v12 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-07-07 17:39 ` [dpdk-dev] [PATCH v12 3/4] igb: " Liang-Min Larry Wang
2015-07-07 17:39 ` [dpdk-dev] [PATCH v12 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-07-10 12:48 ` [dpdk-dev] [PATCH v13 0/4] User-space Ethtool Liang-Min Larry Wang
2015-07-10 12:48 ` [dpdk-dev] [PATCH v13 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-07-10 12:48 ` [dpdk-dev] [PATCH v13 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-07-10 12:48 ` [dpdk-dev] [PATCH v13 3/4] igb: " Liang-Min Larry Wang
2015-07-10 12:48 ` [dpdk-dev] [PATCH v13 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-07-12 21:22 ` [dpdk-dev] [PATCH v14 0/4] User-space Ethtool Liang-Min Larry Wang
2015-07-12 21:22 ` [dpdk-dev] [PATCH v14 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-07-13 22:26 ` Thomas Monjalon
2015-07-12 21:22 ` [dpdk-dev] [PATCH v14 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-07-12 21:22 ` [dpdk-dev] [PATCH v14 3/4] igb: " Liang-Min Larry Wang
2015-07-12 21:22 ` [dpdk-dev] [PATCH v14 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-07-14 2:18 ` [dpdk-dev] [PATCH v15 0/4] User-space Ethtool Liang-Min Larry Wang
2015-07-14 2:18 ` [dpdk-dev] [PATCH v15 1/4] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-07-15 6:16 ` Thomas Monjalon
2015-07-15 10:07 ` Wang, Liang-min
2015-07-15 10:27 ` Thomas Monjalon
2015-07-15 10:48 ` Wang, Liang-min
2015-07-15 11:20 ` Thomas Monjalon
2015-07-15 11:36 ` Wang, Liang-min
2015-07-15 12:06 ` Thomas Monjalon
2015-07-14 2:18 ` [dpdk-dev] [PATCH v15 2/4] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-07-14 2:18 ` [dpdk-dev] [PATCH v15 3/4] igb: " Liang-Min Larry Wang
2015-07-14 2:18 ` [dpdk-dev] [PATCH v15 4/4] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-07-14 13:11 ` [dpdk-dev] [PATCH v16 0/6] User-space Ethtool Liang-Min Larry Wang
2015-07-14 13:11 ` [dpdk-dev] [PATCH v16 1/6] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-07-14 13:11 ` [dpdk-dev] [PATCH v16 2/6] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-07-14 13:11 ` [dpdk-dev] [PATCH v16 3/6] igb: " Liang-Min Larry Wang
2015-07-14 13:11 ` [dpdk-dev] [PATCH v16 4/6] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-07-14 13:11 ` [dpdk-dev] [PATCH v16 5/6] ethdev: change api name, version information and fix macro Liang-Min Larry Wang
2015-07-14 13:11 ` [dpdk-dev] [PATCH v16 6/6] examples/l2fwd-ethtool: replace lib with new API name Liang-Min Larry Wang
2015-07-14 20:13 ` [dpdk-dev] [PATCH v16 0/6] User-space Ethtool Thomas Monjalon
2015-07-14 20:56 ` Wang, Liang-min
2015-07-15 5:53 ` Thomas Monjalon
2015-07-15 10:15 ` Wang, Liang-min
2015-07-15 10:30 ` Thomas Monjalon
2015-07-16 13:25 ` [dpdk-dev] [PATCH v17 0/5] " Liang-Min Larry Wang
2015-07-16 13:25 ` [dpdk-dev] [PATCH v17 1/5] ethdev: add api to support setting default mac addr Liang-Min Larry Wang
2015-07-16 13:25 ` [dpdk-dev] [PATCH v17 2/5] ethdev: add apis to support access device info Liang-Min Larry Wang
2015-07-16 13:25 ` [dpdk-dev] [PATCH v17 3/5] ixgbe: add ops to support ethtool ops Liang-Min Larry Wang
2015-07-16 13:25 ` [dpdk-dev] [PATCH v17 4/5] igb: " Liang-Min Larry Wang
2015-07-16 13:25 ` [dpdk-dev] [PATCH v17 5/5] examples: new example: l2fwd-ethtool Liang-Min Larry Wang
2015-07-16 21:25 ` Thomas Monjalon
2015-07-16 21:48 ` [dpdk-dev] [PATCH v17 0/5] User-space Ethtool Thomas Monjalon
2015-07-16 21:55 ` Wang, Liang-min
2015-07-16 22:09 ` Thomas Monjalon
2015-07-16 22:15 ` Wang, Liang-min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E4655AD1E443BD44A5DC6E46A0FE7202317953CE@xmb-aln-x05.cisco.com \
--to=dharton@cisco.com \
--cc=dev@dpdk.org \
--cc=liang-min.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).