From: "Wang, Zhihong" <zhihong.wang@intel.com>
To: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
Marc Sune <marc.sune@bisdn.de>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 0/4] DPDK memcpy optimization
Date: Tue, 27 Jan 2015 01:42:25 +0000 [thread overview]
Message-ID: <F60F360A2500CD45ACDB1D700268892D0E760F8B@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <2601191342CEEE43887BDE71AB977258213DFA32@irsmsx105.ger.corp.intel.com>
> -----Original Message-----
> From: Ananyev, Konstantin
> Sent: Tuesday, January 27, 2015 2:29 AM
> To: Wang, Zhihong; Richardson, Bruce; Marc Sune
> Cc: dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH 0/4] DPDK memcpy optimization
>
> Hi Zhihong,
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wang, Zhihong
> > Sent: Friday, January 23, 2015 6:52 AM
> > To: Richardson, Bruce; Marc Sune
> > Cc: dev@dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 0/4] DPDK memcpy optimization
> >
> >
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Bruce
> > > Richardson
> > > Sent: Wednesday, January 21, 2015 9:26 PM
> > > To: Marc Sune
> > > Cc: dev@dpdk.org
> > > Subject: Re: [dpdk-dev] [PATCH 0/4] DPDK memcpy optimization
> > >
> > > On Wed, Jan 21, 2015 at 02:21:25PM +0100, Marc Sune wrote:
> > > >
> > > > On 21/01/15 14:02, Bruce Richardson wrote:
> > > > >On Wed, Jan 21, 2015 at 01:36:41PM +0100, Marc Sune wrote:
> > > > >>On 21/01/15 04:44, Wang, Zhihong wrote:
> > > > >>>>-----Original Message-----
> > > > >>>>From: Richardson, Bruce
> > > > >>>>Sent: Wednesday, January 21, 2015 12:15 AM
> > > > >>>>To: Neil Horman
> > > > >>>>Cc: Wang, Zhihong; dev@dpdk.org
> > > > >>>>Subject: Re: [dpdk-dev] [PATCH 0/4] DPDK memcpy optimization
> > > > >>>>
> > > > >>>>On Tue, Jan 20, 2015 at 10:11:18AM -0500, Neil Horman wrote:
> > > > >>>>>On Tue, Jan 20, 2015 at 03:01:44AM +0000, Wang, Zhihong wrote:
> > > > >>>>>>>-----Original Message-----
> > > > >>>>>>>From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > > > >>>>>>>Sent: Monday, January 19, 2015 9:02 PM
> > > > >>>>>>>To: Wang, Zhihong
> > > > >>>>>>>Cc: dev@dpdk.org
> > > > >>>>>>>Subject: Re: [dpdk-dev] [PATCH 0/4] DPDK memcpy
> > > > >>>>>>>optimization
> > > > >>>>>>>
> > > > >>>>>>>On Mon, Jan 19, 2015 at 09:53:30AM +0800,
> > > > >>>>>>>zhihong.wang@intel.com
> > > > >>>>wrote:
> > > > >>>>>>>>This patch set optimizes memcpy for DPDK for both SSE and
> > > > >>>>>>>>AVX
> > > > >>>>platforms.
> > > > >>>>>>>>It also extends memcpy test coverage with unaligned cases
> > > > >>>>>>>>and more test
> > > > >>>>>>>points.
> > > > >>>>>>>>Optimization techniques are summarized below:
> > > > >>>>>>>>
> > > > >>>>>>>>1. Utilize full cache bandwidth
> > > > >>>>>>>>
> > > > >>>>>>>>2. Enforce aligned stores
> > > > >>>>>>>>
> > > > >>>>>>>>3. Apply load address alignment based on architecture
> > > > >>>>>>>>features
> > > > >>>>>>>>
> > > > >>>>>>>>4. Make load/store address available as early as possible
> > > > >>>>>>>>
> > > > >>>>>>>>5. General optimization techniques like inlining, branch
> > > > >>>>>>>>reducing, prefetch pattern access
> > > > >>>>>>>>
> > > > >>>>>>>>Zhihong Wang (4):
> > > > >>>>>>>> Disabled VTA for memcpy test in app/test/Makefile
> > > > >>>>>>>> Removed unnecessary test cases in test_memcpy.c
> > > > >>>>>>>> Extended test coverage in test_memcpy_perf.c
> > > > >>>>>>>> Optimized memcpy in arch/x86/rte_memcpy.h for both SSE
> > > and AVX
> > > > >>>>>>>> platforms
> > > > >>>>>>>>
> > > > >>>>>>>> app/test/Makefile | 6 +
> > > > >>>>>>>> app/test/test_memcpy.c | 52 +-
> > > > >>>>>>>> app/test/test_memcpy_perf.c | 238 +++++---
> > > > >>>>>>>> .../common/include/arch/x86/rte_memcpy.h | 664
> > > > >>>>>>>+++++++++++++++------
> > > > >>>>>>>> 4 files changed, 656 insertions(+), 304 deletions(-)
> > > > >>>>>>>>
> > > > >>>>>>>>--
> > > > >>>>>>>>1.9.3
> > > > >>>>>>>>
> > > > >>>>>>>>
> > > > >>>>>>>Are you able to compile this with gcc 4.9.2? The
> > > > >>>>>>>compilation of test_memcpy_perf is taking forever for me. It
> appears hung.
> > > > >>>>>>>Neil
> > > > >>>>>>Neil,
> > > > >>>>>>
> > > > >>>>>>Thanks for reporting this!
> > > > >>>>>>It should compile but will take quite some time if the CPU
> > > > >>>>>>doesn't support
> > > > >>>>AVX2, the reason is that:
> > > > >>>>>>1. The SSE & AVX memcpy implementation is more complicated
> > > than
> > > > >>>>AVX2
> > > > >>>>>>version thus the compiler takes more time to compile and
> > > > >>>>>>optimize
> > > 2.
> > > > >>>>>>The new test_memcpy_perf.c contains 126 constants memcpy
> > > > >>>>>>calls for better test case coverage, that's quite a lot
> > > > >>>>>>
> > > > >>>>>>I've just tested this patch on an Ivy Bridge machine with GCC
> 4.9.2:
> > > > >>>>>>1. The whole compile process takes 9'41" with the original
> > > > >>>>>>test_memcpy_perf.c (63 + 63 = 126 constant memcpy calls) 2.
> > > > >>>>>>It takes only 2'41" after I reduce the constant memcpy call
> > > > >>>>>>number to 12 + 12 = 24
> > > > >>>>>>
> > > > >>>>>>I'll reduce memcpy call in the next version of patch.
> > > > >>>>>>
> > > > >>>>>ok, thank you. I'm all for optimzation, but I think a
> > > > >>>>>compile that takes almost
> > > > >>>>>10 minutes for a single file is going to generate some raised
> > > > >>>>>eyebrows when end users start tinkering with it
> > > > >>>>>
> > > > >>>>>Neil
> > > > >>>>>
> > > > >>>>>>Zhihong (John)
> > > > >>>>>>
> > > > >>>>Even two minutes is a very long time to compile, IMHO. The
> > > > >>>>whole of DPDK doesn't take that long to compile right now, and
> > > > >>>>that's with a couple of huge header files with routing tables
> > > > >>>>in it. Any chance you could cut compile time down to a few
> > > > >>>>seconds while still
> > > having reasonable tests?
> > > > >>>>Also, when there is AVX2 present on the system, what is the
> > > > >>>>compile time like for that code?
> > > > >>>>
> > > > >>>> /Bruce
> > > > >>>Neil, Bruce,
> > > > >>>
> > > > >>>Some data first.
> > > > >>>
> > > > >>>Sandy Bridge without AVX2:
> > > > >>>1. original w/ 10 constant memcpy: 2'25"
> > > > >>>2. patch w/ 12 constant memcpy: 2'41"
> > > > >>>3. patch w/ 63 constant memcpy: 9'41"
> > > > >>>
> > > > >>>Haswell with AVX2:
> > > > >>>1. original w/ 10 constant memcpy: 1'57"
> > > > >>>2. patch w/ 12 constant memcpy: 1'56"
> > > > >>>3. patch w/ 63 constant memcpy: 3'16"
> > > > >>>
> > > > >>>Also, to address Bruce's question, we have to reduce test case
> > > > >>>to cut
> > > down compile time. Because we use:
> > > > >>>1. intrinsics instead of assembly for better flexibility and
> > > > >>>can utilize more compiler optimization 2. complex function body
> > > > >>>for better performance 3. inlining This increases compile time.
> > > > >>>But I think it'd be okay to do that as long as we can select a
> > > > >>>fair set of
> > > test points.
> > > > >>>
> > > > >>>It'd be great if you could give some suggestion, say, 12 points.
> > > > >>>
> > > > >>>Zhihong (John)
> > > > >>>
> > > > >>>
> > > > >>While I agree in the general case these long compilation times
> > > > >>is painful for the users, having a factor of 2-8x in memcpy
> > > > >>operations is quite an improvement, specially in DPDK
> > > > >>applications which need to deal
> > > > >>(unfortunately) heavily on them -- e.g. IP fragmentation and
> reassembly.
> > > > >>
> > > > >>Why not having a fast compilation by default, and a tunable
> > > > >>config flag to enable a highly optimized version of rte_memcpy (e.g.
> > > RTE_EAL_OPT_MEMCPY)?
> > > > >>
> > > > >>Marc
> > > > >>
> > > > >Out of interest, are these 2-8x improvements something you have
> > > > >benchmarked in these app scenarios? [i.e. not just in micro-
> benchmarks].
> > > >
> > > > How much that micro-speedup will end up affecting the performance
> > > > of the entire application is something I cannot say, so I agree
> > > > that we should probably have some additional benchmarks before
> > > > deciding that pays off maintaining 2 versions of rte_memcpy.
> > > >
> > > > There are however a bunch of possible DPDK applications that could
> > > > potentially benefit; IP fragmentation, tunneling and specialized
> > > > DPI applications, among others, since they involve a reasonable
> > > > amount of memcpys per pkt. My point was, *if* it proves that is
> > > > enough beneficial, why not having it optionally?
> > > >
> > > > Marc
> > >
> > > I agree, if it provides the speedups then we need to have it in -
> > > and quite possibly on by default, even.
> > >
> > > /Bruce
> >
> > Since we're clear now that the long compile time is mainly caused by too
> many inline function calls, I think it's okay not to do this.
> > Would you agree?
>
> Actually I wonder, if instead of:
>
> + switch (srcofs) {
> + case 0x01: MOVEUNALIGNED_LEFT47(dst, src, n, 0x01); break;
> + case 0x02: MOVEUNALIGNED_LEFT47(dst, src, n, 0x02); break;
> + case 0x03: MOVEUNALIGNED_LEFT47(dst, src, n, 0x03); break;
> + case 0x04: MOVEUNALIGNED_LEFT47(dst, src, n, 0x04); break;
> + case 0x05: MOVEUNALIGNED_LEFT47(dst, src, n, 0x05); break;
> + case 0x06: MOVEUNALIGNED_LEFT47(dst, src, n, 0x06); break;
> + case 0x07: MOVEUNALIGNED_LEFT47(dst, src, n, 0x07); break;
> + case 0x08: MOVEUNALIGNED_LEFT47(dst, src, n, 0x08); break;
> + case 0x09: MOVEUNALIGNED_LEFT47(dst, src, n, 0x09); break;
> + case 0x0A: MOVEUNALIGNED_LEFT47(dst, src, n, 0x0A); break;
> + case 0x0B: MOVEUNALIGNED_LEFT47(dst, src, n, 0x0B); break;
> + case 0x0C: MOVEUNALIGNED_LEFT47(dst, src, n, 0x0C); break;
> + case 0x0D: MOVEUNALIGNED_LEFT47(dst, src, n, 0x0D); break;
> + case 0x0E: MOVEUNALIGNED_LEFT47(dst, src, n, 0x0E); break;
> + case 0x0F: MOVEUNALIGNED_LEFT47(dst, src, n, 0x0F); break;
> + default:;
> + }
>
> We'll just do:
> MOVEUNALIGNED_LEFT47(dst, src, n, srcofs);
>
> That should reduce size of the generated code quite a bit, wouldn't it?
> From other side MOVEUNALIGNED_LEFT47() is pretty big chunk, so
> performance difference having offset value in a register vs immediate value
> shouldn't be significant.
>
> Konstantin
>
> >
> > Zhihong (John)
Hey Konstantin,
We have to use switch here because PALIGNR requires the shift count to be an 8-bit immediate.
Zhihong (John)
next prev parent reply other threads:[~2015-01-27 1:42 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-19 1:53 zhihong.wang
2015-01-19 1:53 ` [dpdk-dev] [PATCH 1/4] app/test: Disabled VTA for memcpy test in app/test/Makefile zhihong.wang
2015-01-19 1:53 ` [dpdk-dev] [PATCH 2/4] app/test: Removed unnecessary test cases in test_memcpy.c zhihong.wang
2015-01-19 1:53 ` [dpdk-dev] [PATCH 3/4] app/test: Extended test coverage in test_memcpy_perf.c zhihong.wang
2015-01-19 1:53 ` [dpdk-dev] [PATCH 4/4] lib/librte_eal: Optimized memcpy in arch/x86/rte_memcpy.h for both SSE and AVX platforms zhihong.wang
2015-01-20 17:15 ` Stephen Hemminger
2015-01-20 19:16 ` Neil Horman
2015-01-21 3:18 ` Wang, Zhihong
2015-01-25 20:02 ` Jim Thompson
2015-01-26 14:43 ` Wodkowski, PawelX
2015-01-27 5:12 ` Wang, Zhihong
2015-01-19 13:02 ` [dpdk-dev] [PATCH 0/4] DPDK memcpy optimization Neil Horman
2015-01-20 3:01 ` Wang, Zhihong
2015-01-20 15:11 ` Neil Horman
2015-01-20 16:14 ` Bruce Richardson
2015-01-21 3:44 ` Wang, Zhihong
2015-01-21 11:40 ` Bruce Richardson
2015-01-21 12:02 ` Ananyev, Konstantin
2015-01-21 12:38 ` Neil Horman
2015-01-23 3:26 ` Wang, Zhihong
2015-01-21 12:36 ` Marc Sune
2015-01-21 13:02 ` Bruce Richardson
2015-01-21 13:21 ` Marc Sune
2015-01-21 13:26 ` Bruce Richardson
2015-01-21 19:49 ` Stephen Hemminger
2015-01-21 20:54 ` Neil Horman
2015-01-21 21:25 ` Jim Thompson
2015-01-22 0:53 ` Stephen Hemminger
2015-01-22 9:06 ` Luke Gorrie
2015-01-22 13:29 ` Jay Rolette
2015-01-22 18:27 ` Luke Gorrie
2015-01-22 19:36 ` Jay Rolette
2015-01-22 18:21 ` EDMISON, Kelvin (Kelvin)
2015-01-27 8:22 ` Wang, Zhihong
2015-01-28 21:48 ` EDMISON, Kelvin (Kelvin)
2015-01-29 1:53 ` Wang, Zhihong
2015-01-23 6:52 ` Wang, Zhihong
2015-01-26 18:29 ` Ananyev, Konstantin
2015-01-27 1:42 ` Wang, Zhihong [this message]
2015-01-27 11:30 ` Ananyev, Konstantin
2015-01-27 12:19 ` Ananyev, Konstantin
2015-01-28 2:06 ` Wang, Zhihong
2015-01-25 14:50 ` Luke Gorrie
2015-01-26 1:30 ` Wang, Zhihong
2015-01-26 8:03 ` Luke Gorrie
2015-01-27 7:19 ` Wang, Zhihong
2015-01-27 13:57 ` [dpdk-dev] [snabb-devel] " Luke Gorrie
2015-01-29 3:42 ` [dpdk-dev] " Fu, JingguoX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F60F360A2500CD45ACDB1D700268892D0E760F8B@SHSMSX101.ccr.corp.intel.com \
--to=zhihong.wang@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=marc.sune@bisdn.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).