[dpdk-dev] [PATCH v3 2/7] ethdev: add autoneg parameter in flow ctrl accessors

[David Marchand <david.marchand@6wind.com>]

Add autoneg field in flow control parameters.
This makes it easier to understand why changing some parameters does not always
have the expected result.

Changing autoneg is not supported at the moment.

Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_ether/rte_ethdev.h       |    1 +
 lib/librte_pmd_e1000/em_ethdev.c    |    3 +++
 lib/librte_pmd_e1000/igb_ethdev.c   |    3 +++
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |    3 +++
 4 files changed, 10 insertions(+)

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 1e0564d..a410afd 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -649,6 +649,7 @@ struct rte_eth_fc_conf {
 	uint16_t send_xon;    /**< Is XON frame need be sent */
 	enum rte_eth_fc_mode mode;  /**< Link flow control mode */
 	uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
+	uint8_t autoneg;      /**< Use Pause autoneg */
 };
 
 /**
diff --git a/lib/librte_pmd_e1000/em_ethdev.c b/lib/librte_pmd_e1000/em_ethdev.c
index 58efcdf..7913ff0 100644
--- a/lib/librte_pmd_e1000/em_ethdev.c
+++ b/lib/librte_pmd_e1000/em_ethdev.c
@@ -1378,6 +1378,7 @@ eth_em_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water;
 	fc_conf->low_water = hw->fc.low_water;
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = hw->mac.autoneg;
 
 	/*
 	 * Return rx_pause and tx_pause status according to actual setting of
@@ -1422,6 +1423,8 @@ eth_em_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	uint32_t rctl;
 
 	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != hw->mac.autoneg)
+		return -ENOTSUP;
 	rx_buf_size = em_get_rx_buffer_size(hw);
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
diff --git a/lib/librte_pmd_e1000/igb_ethdev.c b/lib/librte_pmd_e1000/igb_ethdev.c
index 92ac4a8..c92b737 100644
--- a/lib/librte_pmd_e1000/igb_ethdev.c
+++ b/lib/librte_pmd_e1000/igb_ethdev.c
@@ -1871,6 +1871,7 @@ eth_igb_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water;
 	fc_conf->low_water = hw->fc.low_water;
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = hw->mac.autoneg;
 
 	/*
 	 * Return rx_pause and tx_pause status according to actual setting of
@@ -1915,6 +1916,8 @@ eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	uint32_t rctl;
 
 	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != hw->mac.autoneg)
+		return -ENOTSUP;
 	rx_buf_size = igb_get_rx_buffer_size(hw);
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index f130080..559d246 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -2309,6 +2309,7 @@ ixgbe_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water[0];
 	fc_conf->low_water = hw->fc.low_water[0];
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = !hw->fc.disable_fc_autoneg;
 
 	/*
 	 * Return rx_pause status according to actual setting of
@@ -2360,6 +2361,8 @@ ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	PMD_INIT_FUNC_TRACE();
 
 	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != !hw->fc.disable_fc_autoneg)
+		return -ENOTSUP;
 	rx_buf_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0));
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
-- 
1.7.10.4