DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH 0/2] i40e improvements
@ 2014-07-02  3:10 Helin Zhang
  2014-07-02  3:10 ` [dpdk-dev] [PATCH 1/2] i40e: use i40e_clear_hw() to clear hardware before PF reset Helin Zhang
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Helin Zhang @ 2014-07-02  3:10 UTC (permalink / raw)
  To: dev

These patches include:
* use i40e_clear_hw() to clear hardware before PF reset.
    It is quite straightforward, use new perfect function to repalce
    old ones for clearing hardware before doing PF reset.
* add required steps in TX queue enable, disable.
    Hardware specification changed recently which requries additional
    steps. Without the steps, DPDK might be not able to transmit
    packets after standard Linux i40e driver loaded.

Helin Zhang (2):
  i40e: use i40e_clear_hw() to clear hardware before PF reset
  i40e: add required steps in TX queue enable, disable

 lib/librte_pmd_i40e/i40e_ethdev.c | 116 +++++---------------------------------
 1 file changed, 15 insertions(+), 101 deletions(-)

-- 
1.8.1.4

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [dpdk-dev] [PATCH 1/2] i40e: use i40e_clear_hw() to clear hardware before PF reset
  2014-07-02  3:10 [dpdk-dev] [PATCH 0/2] i40e improvements Helin Zhang
@ 2014-07-02  3:10 ` Helin Zhang
  2014-07-02  3:10 ` [dpdk-dev] [PATCH 2/2] i40e: add required steps in TX queue enable, disable Helin Zhang
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: Helin Zhang @ 2014-07-02  3:10 UTC (permalink / raw)
  To: dev

i40e_clear_hw() was provided recently in shared code to clear
hardware, which can cover disabling all queues. The code
changes are to remove i40e_pf_disable_all_queues() and use
i40e_clear_hw() instead.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c | 103 +-------------------------------------
 1 file changed, 2 insertions(+), 101 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 068b847..6624586 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -188,7 +188,6 @@ static struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf,
 						struct i40e_vsi *vsi);
 static int i40e_pf_config_mq_rx(struct i40e_pf *pf);
 static int i40e_vsi_config_double_vlan(struct i40e_vsi *vsi, int on);
-static int i40e_pf_disable_all_queues(struct i40e_hw *hw);
 static inline int i40e_find_all_vlan_for_mac(struct i40e_vsi *vsi,
 					     struct i40e_macvlan_filter *mv_f,
 					     int num,
@@ -373,12 +372,8 @@ eth_i40e_dev_init(__rte_unused struct eth_driver *eth_drv,
 	hw->bus.device = pci_dev->addr.devid;
 	hw->bus.func = pci_dev->addr.function;
 
-	/* Disable all queues before PF reset, as required */
-	ret = i40e_pf_disable_all_queues(hw);
-	if (ret != I40E_SUCCESS) {
-		PMD_INIT_LOG(ERR, "Failed to disable queues %u\n", ret);
-		return ret;
-	}
+	/* Make sure all is clean before doing PF reset */
+	i40e_clear_hw(hw);
 
 	/* Reset here to make sure all is clean for each PF */
 	ret = i40e_pf_reset(hw);
@@ -3948,97 +3943,3 @@ i40e_pf_config_mq_rx(struct i40e_pf *pf)
 
 	return 0;
 }
-
-static int
-i40e_disable_queue(struct i40e_hw *hw, uint16_t q_idx)
-{
-	uint16_t i;
-	uint32_t reg;
-
-	/* Disable TX queue */
-	for (i = 0; i < I40E_CHK_Q_ENA_COUNT; i++) {
-		reg = I40E_READ_REG(hw, I40E_QTX_ENA(q_idx));
-		if (!(((reg >> I40E_QTX_ENA_QENA_REQ_SHIFT) & 0x1) ^
-			((reg >> I40E_QTX_ENA_QENA_STAT_SHIFT) & 0x1)))
-			break;
-		rte_delay_us(I40E_CHK_Q_ENA_INTERVAL_US);
-	}
-	if (i >= I40E_CHK_Q_ENA_COUNT) {
-		PMD_DRV_LOG(ERR, "Failed to disable "
-			"tx queue[%u]\n", q_idx);
-		return I40E_ERR_TIMEOUT;
-	}
-
-	if (reg & I40E_QTX_ENA_QENA_STAT_MASK) {
-		reg &= ~I40E_QTX_ENA_QENA_REQ_MASK;
-		I40E_WRITE_REG(hw, I40E_QTX_ENA(q_idx), reg);
-		for (i = 0; i < I40E_CHK_Q_ENA_COUNT; i++) {
-			rte_delay_us(I40E_CHK_Q_ENA_INTERVAL_US);
-			reg = I40E_READ_REG(hw, I40E_QTX_ENA(q_idx));
-			if (!(reg & I40E_QTX_ENA_QENA_REQ_MASK) &&
-				!(reg & I40E_QTX_ENA_QENA_STAT_MASK))
-				break;
-		}
-		if (i >= I40E_CHK_Q_ENA_COUNT) {
-			PMD_DRV_LOG(ERR, "Failed to disable "
-				"tx queue[%u]\n", q_idx);
-			return I40E_ERR_TIMEOUT;
-		}
-	}
-
-	/* Disable RX queue */
-	for (i = 0; i < I40E_CHK_Q_ENA_COUNT; i++) {
-		reg = I40E_READ_REG(hw, I40E_QRX_ENA(q_idx));
-		if (!((reg >> I40E_QRX_ENA_QENA_REQ_SHIFT) & 0x1) ^
-			((reg >> I40E_QRX_ENA_QENA_STAT_SHIFT) & 0x1))
-			break;
-		rte_delay_us(I40E_CHK_Q_ENA_INTERVAL_US);
-	}
-	if (i >= I40E_CHK_Q_ENA_COUNT) {
-		PMD_DRV_LOG(ERR, "Failed to disable "
-			"rx queue[%u]\n", q_idx);
-		return I40E_ERR_TIMEOUT;
-	}
-
-	if (reg & I40E_QRX_ENA_QENA_STAT_MASK) {
-		reg &= ~I40E_QRX_ENA_QENA_REQ_MASK;
-		I40E_WRITE_REG(hw, I40E_QRX_ENA(q_idx), reg);
-		for (i = 0; i < I40E_CHK_Q_ENA_COUNT; i++) {
-			rte_delay_us(I40E_CHK_Q_ENA_INTERVAL_US);
-			reg = I40E_READ_REG(hw, I40E_QRX_ENA(q_idx));
-			if (!(reg & I40E_QRX_ENA_QENA_REQ_MASK) &&
-				!(reg & I40E_QRX_ENA_QENA_STAT_MASK))
-				break;
-		}
-		if (i >= I40E_CHK_Q_ENA_COUNT) {
-			PMD_DRV_LOG(ERR, "Failed to disable "
-				"rx queue[%u]\n", q_idx);
-			return I40E_ERR_TIMEOUT;
-		}
-	}
-
-	return I40E_SUCCESS;
-}
-
-static int
-i40e_pf_disable_all_queues(struct i40e_hw *hw)
-{
-	uint32_t reg;
-	uint16_t firstq, lastq, maxq, i;
-	int ret;
-	reg = I40E_READ_REG(hw, I40E_PFLAN_QALLOC);
-	if (!(reg & I40E_PFLAN_QALLOC_VALID_MASK)) {
-		PMD_DRV_LOG(INFO, "PF queue allocation is invalid\n");
-		return I40E_ERR_PARAM;
-	}
-	firstq = reg & I40E_PFLAN_QALLOC_FIRSTQ_MASK;
-	lastq = (reg & I40E_PFLAN_QALLOC_LASTQ_MASK) >>
-			I40E_PFLAN_QALLOC_LASTQ_SHIFT;
-	maxq = lastq - firstq;
-	for (i = 0; i <= maxq; i++) {
-		ret = i40e_disable_queue(hw, i);
-		if (ret != I40E_SUCCESS)
-			return ret;
-	}
-	return I40E_SUCCESS;
-}
-- 
1.8.1.4

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [dpdk-dev] [PATCH 2/2] i40e: add required steps in TX queue enable, disable
  2014-07-02  3:10 [dpdk-dev] [PATCH 0/2] i40e improvements Helin Zhang
  2014-07-02  3:10 ` [dpdk-dev] [PATCH 1/2] i40e: use i40e_clear_hw() to clear hardware before PF reset Helin Zhang
@ 2014-07-02  3:10 ` Helin Zhang
  2014-07-02  4:16 ` [dpdk-dev] [PATCH 0/2] i40e improvements Cao, Min
  2014-07-02  8:56 ` Thomas Monjalon
  3 siblings, 0 replies; 5+ messages in thread
From: Helin Zhang @ 2014-07-02  3:10 UTC (permalink / raw)
  To: dev

Hardware specification changed recently which requires to set
or clear TX queue disable flags before actually enabling or
disabling a specific TX queue. 'QTX_HEAD' register needs to
be cleared before setting the QENA_REQ flag.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 6624586..9ed31b5 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -85,6 +85,8 @@
 #define I40E_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
 #define I40E_QUEUE_ITR_INTERVAL_MAX     8160 /* 8160 us */
 
+#define I40E_PRE_TX_Q_CFG_WAIT_US       10 /* 10 us */
+
 #define I40E_RSS_OFFLOAD_ALL ( \
 	ETH_RSS_NONF_IPV4_UDP | \
 	ETH_RSS_NONF_IPV4_TCP | \
@@ -2780,6 +2782,13 @@ i40e_switch_tx_queue(struct i40e_hw *hw, uint16_t q_idx, bool on)
 	uint32_t reg;
 	uint16_t j;
 
+	/**
+	 * Set or clear TX Queue Disable flags,
+	 * which is required by hardware.
+	 */
+	i40e_pre_tx_queue_cfg(hw, q_idx, on);
+	rte_delay_us(I40E_PRE_TX_Q_CFG_WAIT_US);
+
 	/* Wait until the request is finished */
 	for (j = 0; j < I40E_CHK_Q_ENA_COUNT; j++) {
 		rte_delay_us(I40E_CHK_Q_ENA_INTERVAL_US);
@@ -2793,6 +2802,8 @@ i40e_switch_tx_queue(struct i40e_hw *hw, uint16_t q_idx, bool on)
 	if (on) {
 		if (reg & I40E_QTX_ENA_QENA_STAT_MASK)
 			return I40E_SUCCESS; /* already on, skip next steps */
+
+		I40E_WRITE_REG(hw, I40E_QTX_HEAD(q_idx), 0);
 		reg |= I40E_QTX_ENA_QENA_REQ_MASK;
 	} else {
 		if (!(reg & I40E_QTX_ENA_QENA_STAT_MASK))
@@ -2821,8 +2832,10 @@ i40e_switch_tx_queue(struct i40e_hw *hw, uint16_t q_idx, bool on)
 			(on ? "enable" : "disable"), q_idx);
 		return I40E_ERR_TIMEOUT;
 	}
+
 	return I40E_SUCCESS;
 }
+
 /* Swith on or off the tx queues */
 static int
 i40e_vsi_switch_tx_queues(struct i40e_vsi *vsi, bool on)
-- 
1.8.1.4

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH 0/2] i40e improvements
  2014-07-02  3:10 [dpdk-dev] [PATCH 0/2] i40e improvements Helin Zhang
  2014-07-02  3:10 ` [dpdk-dev] [PATCH 1/2] i40e: use i40e_clear_hw() to clear hardware before PF reset Helin Zhang
  2014-07-02  3:10 ` [dpdk-dev] [PATCH 2/2] i40e: add required steps in TX queue enable, disable Helin Zhang
@ 2014-07-02  4:16 ` Cao, Min
  2014-07-02  8:56 ` Thomas Monjalon
  3 siblings, 0 replies; 5+ messages in thread
From: Cao, Min @ 2014-07-02  4:16 UTC (permalink / raw)
  To: dev

Test-by: Min Cao <min.cao@intel.com>
This patch includes 3 files, and has been tested by Intel.
Please see test environment information as the following:
Fedora 20 x86_64, Linux Kernel 3.11.10-301, GCC 4.8.2  Intel Xeon CPU E5-2680 v2 @ 2.80GHz
NIC: Intel Fortville 4*10G. We verified testpmd.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH 0/2] i40e improvements
  2014-07-02  3:10 [dpdk-dev] [PATCH 0/2] i40e improvements Helin Zhang
                   ` (2 preceding siblings ...)
  2014-07-02  4:16 ` [dpdk-dev] [PATCH 0/2] i40e improvements Cao, Min
@ 2014-07-02  8:56 ` Thomas Monjalon
  3 siblings, 0 replies; 5+ messages in thread
From: Thomas Monjalon @ 2014-07-02  8:56 UTC (permalink / raw)
  To: Helin Zhang; +Cc: dev

> These patches include:
> * use i40e_clear_hw() to clear hardware before PF reset.
>     It is quite straightforward, use new perfect function to repalce
>     old ones for clearing hardware before doing PF reset.
> * add required steps in TX queue enable, disable.
>     Hardware specification changed recently which requries additional
>     steps. Without the steps, DPDK might be not able to transmit
>     packets after standard Linux i40e driver loaded.
> 
> Helin Zhang (2):
>   i40e: use i40e_clear_hw() to clear hardware before PF reset
>   i40e: add required steps in TX queue enable, disable

Tested-by: Min Cao <min.cao@intel.com>

Applied as last minute fixes for version 1.7.0.

Thanks
-- 
Thomas

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2014-07-02  8:56 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-02  3:10 [dpdk-dev] [PATCH 0/2] i40e improvements Helin Zhang
2014-07-02  3:10 ` [dpdk-dev] [PATCH 1/2] i40e: use i40e_clear_hw() to clear hardware before PF reset Helin Zhang
2014-07-02  3:10 ` [dpdk-dev] [PATCH 2/2] i40e: add required steps in TX queue enable, disable Helin Zhang
2014-07-02  4:16 ` [dpdk-dev] [PATCH 0/2] i40e improvements Cao, Min
2014-07-02  8:56 ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).