[dpdk-dev] [PATCH 09/26] ixgbe/base: issue firmware command when coming up

[Wenzhuo Lu <wenzhuo.lu@intel.com>]

The driver now needs to issue a firmware command to inform the
firmware that a driver is coming up. This prevents the possibility
of the firmware and the driver configuring the PHY at the same
time. Upon completion of the command, the firmware will no longer
be configuring the PHY.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
 drivers/net/ixgbe/base/ixgbe_type.h |  2 ++
 drivers/net/ixgbe/base/ixgbe_x550.c | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
index 0e4f312..4e38f53 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -2798,6 +2798,7 @@ enum ixgbe_fdir_pballoc_type {
 #define IXGBE_HI_FLASH_ERASE_TIMEOUT	1000 /* Process Erase command limit */
 #define IXGBE_HI_FLASH_UPDATE_TIMEOUT	5000 /* Process Update command limit */
 #define IXGBE_HI_FLASH_APPLY_TIMEOUT	0 /* Process Apply command limit */
+#define IXGBE_HI_PHY_MGMT_REQ_TIMEOUT	2000 /* Wait up to 2 seconds */
 
 /* CEM Support */
 #define FW_CEM_HDR_LEN			0x4
@@ -2818,6 +2819,7 @@ enum ixgbe_fdir_pballoc_type {
 #define FW_MAX_READ_BUFFER_SIZE		1024
 #define FW_DISABLE_RXEN_CMD		0xDE
 #define FW_DISABLE_RXEN_LEN		0x1
+#define FW_PHY_MGMT_REQ_CMD		0x20
 /* Host Interface Command Structures */
 
 struct ixgbe_hic_hdr {
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index 4664583..0ce1c85 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -972,6 +972,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
  */
 s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
 {
+	struct ixgbe_hic_hdr fw_cmd;
 	ixgbe_link_speed link_speed;
 	s32 status;
 	u32 ctrl = 0;
@@ -980,6 +981,22 @@ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
 
 	DEBUGFUNC("ixgbe_reset_hw_X550em");
 
+	fw_cmd.cmd = FW_PHY_MGMT_REQ_CMD;
+	fw_cmd.buf_len = 0;
+	fw_cmd.cmd_or_resp.cmd_resv = 0;
+	fw_cmd.checksum = FW_DEFAULT_CHECKSUM;
+	status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
+					      sizeof(fw_cmd),
+					      IXGBE_HI_PHY_MGMT_REQ_TIMEOUT,
+					      true);
+	if (status)
+		ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+			      "PHY mgmt command failed with %d\n", status);
+	else if (fw_cmd.cmd_or_resp.ret_status != FW_CEM_RESP_STATUS_SUCCESS)
+		ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+			      "PHY mgmt command returned %d\n",
+			      fw_cmd.cmd_or_resp.ret_status);
+
 	/* Call adapter stop to disable Tx/Rx and clear interrupts */
 	status = hw->mac.ops.stop_adapter(hw);
 	if (status != IXGBE_SUCCESS)
-- 
1.9.3