DPDK patches and discussions
 help / color / mirror / Atom feed
From: Wenzhuo Lu <wenzhuo.lu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 18/26] ixgbe/base: move I2C MUX function from ixgbe_x540.c to ixgbe_x550.c
Date: Fri,  5 Jun 2015 13:21:50 +0800	[thread overview]
Message-ID: <1433481718-24253-19-git-send-email-wenzhuo.lu@intel.com> (raw)
In-Reply-To: <1433481718-24253-1-git-send-email-wenzhuo.lu@intel.com>

The following patch moves the handling of the I2C MUX (which is only
used for x550em SFP+ devices) out of the ixgbe_x540.c file and
into the ixgbe_x550.c file where it belongs.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
 drivers/net/ixgbe/base/ixgbe_x540.c | 30 +-----------------
 drivers/net/ixgbe/base/ixgbe_x550.c | 63 +++++++++++++++++++++++++++++++++++++
 drivers/net/ixgbe/base/ixgbe_x550.h |  2 ++
 3 files changed, 66 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ixgbe/base/ixgbe_x540.c b/drivers/net/ixgbe/base/ixgbe_x540.c
index 1462689..af29b13 100644
--- a/drivers/net/ixgbe/base/ixgbe_x540.c
+++ b/drivers/net/ixgbe/base/ixgbe_x540.c
@@ -739,26 +739,6 @@ STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
 }
 
 /**
- * ixgbe_set_mux - Set mux for port 1 access with CS4227
- * @hw: pointer to hardware structure
- * @state: set mux if 1, clear if 0
- */
-STATIC void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
-{
-	u32 esdp;
-
-	if (!hw->bus.lan_id)
-		return;
-	esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
-	if (state)
-		esdp |= IXGBE_ESDP_SDP1;
-	else
-		esdp &= ~IXGBE_ESDP_SDP1;
-	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
-	IXGBE_WRITE_FLUSH(hw);
-}
-
-/**
  *  ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
  *  @hw: pointer to hardware structure
  *  @mask: Mask to specify which semaphore to acquire
@@ -800,8 +780,6 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
 			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
 			ixgbe_release_swfw_sync_semaphore(hw);
 			msec_delay(5);
-			if (swi2c_mask)
-				ixgbe_set_mux(hw, 1);
 			return IXGBE_SUCCESS;
 		}
 		/* Firmware currently using resource (fwmask), hardware
@@ -832,8 +810,6 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
 		IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
 		ixgbe_release_swfw_sync_semaphore(hw);
 		msec_delay(5);
-		if (swi2c_mask)
-			ixgbe_set_mux(hw, 1);
 		return IXGBE_SUCCESS;
 	}
 	/* If the resource is not released by other SW the SW can assume that
@@ -871,10 +847,8 @@ void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
 
 	DEBUGFUNC("ixgbe_release_swfw_sync_X540");
 
-	if (mask & IXGBE_GSSR_I2C_MASK) {
+	if (mask & IXGBE_GSSR_I2C_MASK)
 		swmask |= mask & IXGBE_GSSR_I2C_MASK;
-		ixgbe_set_mux(hw, 0);
-	}
 	ixgbe_get_swfw_sync_semaphore(hw);
 
 	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
@@ -1036,5 +1010,3 @@ s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
 
 	return IXGBE_SUCCESS;
 }
-
-
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index a321594..146b2d4 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -383,6 +383,9 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw)
 				    ixgbe_get_supported_physical_layer_X550em;
 
 		mac->ops.setup_fc = ixgbe_setup_fc_X550em;
+	mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em;
+	mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em;
+
 	/* PHY */
 	phy->ops.init = ixgbe_init_phy_ops_X550em;
 	phy->ops.identify = ixgbe_identify_phy_x550em;
@@ -2549,3 +2552,63 @@ s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw)
 out:
 	return ret_val;
 }
+
+/**
+ * ixgbe_set_mux - Set mux for port 1 access with CS4227
+ * @hw: pointer to hardware structure
+ * @state: set mux if 1, clear if 0
+ */
+STATIC void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
+{
+	u32 esdp;
+
+	if (!hw->bus.lan_id)
+		return;
+	esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+	if (state)
+		esdp |= IXGBE_ESDP_SDP1;
+	else
+		esdp &= ~IXGBE_ESDP_SDP1;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to acquire
+ *
+ *  Acquires the SWFW semaphore and sets the I2C MUX
+ **/
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+	s32 status;
+
+	DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em");
+
+	status = ixgbe_acquire_swfw_sync_X540(hw, mask);
+	if (status)
+		return status;
+
+	if (mask & IXGBE_GSSR_I2C_MASK)
+		ixgbe_set_mux(hw, 1);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_release_swfw_sync_X550em - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify which semaphore to release
+ *
+ *  Releases the SWFW semaphore and sets the I2C MUX
+ **/
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask)
+{
+	DEBUGFUNC("ixgbe_release_swfw_sync_X550em");
+
+	if (mask & IXGBE_GSSR_I2C_MASK)
+		ixgbe_set_mux(hw, 0);
+
+	ixgbe_release_swfw_sync_X540(hw, mask);
+}
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h
index a922f93..a60c7ce 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.h
+++ b/drivers/net/ixgbe/base/ixgbe_x550.h
@@ -89,6 +89,8 @@ u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw);
 void ixgbe_disable_rx_x550(struct ixgbe_hw *hw);
 s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed);
 s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
+void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask);
 s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw);
 s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
 				    ixgbe_link_speed speed,
-- 
1.9.3

  parent reply	other threads:[~2015-06-05  5:22 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-05  5:21 [dpdk-dev] [PATCH 00/26] update ixgbe base driver Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 01/26] ixgbe/base: update copyright and readme Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 02/26] ixgbe/base: fix code comment, double from Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 03/26] ixgbe/base: fix typo error in code comment Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 04/26] ixgbe/base: check return value after calling Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 05/26] ixgbe/base: allow tunneled UDP and TCP frames to reach their destination Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 06/26] ixgbe/base: erase ixgbe_get_hi_status Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 07/26] ixgbe/base: provide unlocked I2C methods Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 08/26] ixgbe/base: reduce I2C retry count on X550 devices Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 09/26] ixgbe/base: issue firmware command when coming up Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 10/26] ixgbe/base: add logic to reset CS4227 when needed Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 11/26] ixgbe/base: restore ESDP settings after MAC reset Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 12/26] ixgbe/base: disable FEC(Forward Error Correction) to save power Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 13/26] ixgbe/base: set lan_id for non-PCIe devices Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 14/26] ixgbe/base: add SFP+ dual-speed support Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 15/26] ixgbe/base: add SW based LPLU support Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 16/26] ixgbe/base: fix flow control for KR backplane Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 17/26] ixgbe/base: new simplified x550em init flow Wenzhuo Lu
2015-06-05  5:21 ` Wenzhuo Lu [this message]
2015-06-05  5:21 ` [dpdk-dev] [PATCH 19/26] ixgbe/base: change return value for ixgbe_setup_internal_phy_t_x550em Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 20/26] ixgbe/base: ixgbe_setup_internal_phy_x550em function clean-up Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 21/26] ixgbe/base: add x550em Auto neg Flow Control support Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 22/26] ixgbe/base: add x550em PHY interrupt and forced 1G/10G support Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 23/26] ixgbe/base: add link check support for x550em PHY Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 24/26] ixgbe/base: set lan_id before first I2C access Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 25/26] ixgbe/base: added x550em PHY reset function Wenzhuo Lu
2015-06-05  5:21 ` [dpdk-dev] [PATCH 26/26] ixgbe/base: block EEE(Energy Efficient Ethernet) setup on the interfaces that don't support EEE Wenzhuo Lu
2015-06-09  4:10 ` [dpdk-dev] [PATCH 00/26] update ixgbe base driver Zhang, Helin
2015-06-15 20:49   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433481718-24253-19-git-send-email-wenzhuo.lu@intel.com \
    --to=wenzhuo.lu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).