DPDK patches and discussions
 help / color / mirror / Atom feed
From: Cyril Chemparathy <cchemparathy@ezchip.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 07/12] memzone: allow multiple pagesizes to be requested
Date: Mon, 22 Jun 2015 11:58:39 -0700	[thread overview]
Message-ID: <1434999524-26528-8-git-send-email-cchemparathy@ezchip.com> (raw)
In-Reply-To: <1434999524-26528-1-git-send-email-cchemparathy@ezchip.com>

This patch extends the memzone allocator to remove the restriction
that prevented callers from specifying multiple page sizes in the
flags argument.

In doing so, we also sanitize the free segment matching logic to get
rid of architecture specific disjunctions (2MB vs 1GB on x86, and 16MB
vs 16GB on PPC), thereby allowing for a broader range of hugepages on
architectures that support it.

Change-Id: Ic3713f61da49629a570fe4de34a8aaf5e2e0a19b
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
---
 lib/librte_eal/common/eal_common_memzone.c | 58 ++++++++++++++----------------
 1 file changed, 27 insertions(+), 31 deletions(-)

diff --git a/lib/librte_eal/common/eal_common_memzone.c b/lib/librte_eal/common/eal_common_memzone.c
index 87057d4..84b773c 100644
--- a/lib/librte_eal/common/eal_common_memzone.c
+++ b/lib/librte_eal/common/eal_common_memzone.c
@@ -113,7 +113,8 @@ align_phys_boundary(const struct rte_memseg *ms, size_t len, size_t align,
 
 static const struct rte_memzone *
 memzone_reserve_aligned_thread_unsafe(const char *name, size_t len,
-		int socket_id, unsigned flags, unsigned align, unsigned bound)
+		int socket_id, uint64_t size_mask, unsigned align,
+		unsigned bound)
 {
 	struct rte_mem_config *mcfg;
 	unsigned i = 0;
@@ -201,18 +202,7 @@ memzone_reserve_aligned_thread_unsafe(const char *name, size_t len,
 		if ((requested_len + addr_offset) > free_memseg[i].len)
 			continue;
 
-		/* check flags for hugepage sizes */
-		if ((flags & RTE_MEMZONE_2MB) &&
-				free_memseg[i].hugepage_sz == RTE_PGSIZE_1G)
-			continue;
-		if ((flags & RTE_MEMZONE_1GB) &&
-				free_memseg[i].hugepage_sz == RTE_PGSIZE_2M)
-			continue;
-		if ((flags & RTE_MEMZONE_16MB) &&
-				free_memseg[i].hugepage_sz == RTE_PGSIZE_16G)
-			continue;
-		if ((flags & RTE_MEMZONE_16GB) &&
-				free_memseg[i].hugepage_sz == RTE_PGSIZE_16M)
+		if ((size_mask & free_memseg[i].hugepage_sz) == 0)
 			continue;
 
 		/* this segment is the best until now */
@@ -244,16 +234,6 @@ memzone_reserve_aligned_thread_unsafe(const char *name, size_t len,
 
 	/* no segment found */
 	if (memseg_idx == -1) {
-		/*
-		 * If RTE_MEMZONE_SIZE_HINT_ONLY flag is specified,
-		 * try allocating again without the size parameter otherwise -fail.
-		 */
-		if ((flags & RTE_MEMZONE_SIZE_HINT_ONLY)  &&
-		    ((flags & RTE_MEMZONE_1GB) || (flags & RTE_MEMZONE_2MB)
-		|| (flags & RTE_MEMZONE_16MB) || (flags & RTE_MEMZONE_16GB)))
-			return memzone_reserve_aligned_thread_unsafe(name,
-				len, socket_id, 0, align, bound);
-
 		rte_errno = ENOMEM;
 		return NULL;
 	}
@@ -302,13 +282,18 @@ rte_memzone_reserve_thread_safe(const char *name, size_t len,
 {
 	struct rte_mem_config *mcfg;
 	const struct rte_memzone *mz = NULL;
-
-	/* both sizes cannot be explicitly called for */
-	if (((flags & RTE_MEMZONE_1GB) && (flags & RTE_MEMZONE_2MB))
-		|| ((flags & RTE_MEMZONE_16MB) && (flags & RTE_MEMZONE_16GB))) {
-		rte_errno = EINVAL;
-		return NULL;
-	}
+	uint64_t size_mask = 0;
+
+	if (flags & RTE_MEMZONE_2MB)
+		size_mask |= RTE_PGSIZE_2M;
+	if (flags & RTE_MEMZONE_16MB)
+		size_mask |= RTE_PGSIZE_16M;
+	if (flags & RTE_MEMZONE_1GB)
+		size_mask |= RTE_PGSIZE_1G;
+	if (flags & RTE_MEMZONE_16GB)
+		size_mask |= RTE_PGSIZE_16G;
+	if (!size_mask)
+		size_mask = UINT64_MAX;
 
 	/* get pointer to global configuration */
 	mcfg = rte_eal_get_configuration()->mem_config;
@@ -316,7 +301,18 @@ rte_memzone_reserve_thread_safe(const char *name, size_t len,
 	rte_rwlock_write_lock(&mcfg->mlock);
 
 	mz = memzone_reserve_aligned_thread_unsafe(
-		name, len, socket_id, flags, align, bound);
+		name, len, socket_id, size_mask, align, bound);
+
+	/*
+	 * If we failed to allocate the requested page size, and the 
+	 * RTE_MEMZONE_SIZE_HINT_ONLY flag is specified, try allocating
+	 * again.
+	 */
+	if (!mz && rte_errno == ENOMEM && size_mask != UINT64_MAX &&
+	    flags & RTE_MEMZONE_SIZE_HINT_ONLY) {
+		mz = memzone_reserve_aligned_thread_unsafe(
+			name, len, socket_id, UINT64_MAX, align, bound);
+	}
 
 	rte_rwlock_write_unlock(&mcfg->mlock);
 
-- 
2.1.2

  parent reply	other threads:[~2015-06-22 18:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1434999524-26528-1-git-send-email-cchemparathy@ezchip.com>
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 01/12] test: limit x86 cpuflags checks to x86 builds Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 02/12] hash: fix compilation on non-X86 platforms Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 03/12] hash: check SSE flags only on x86 builds Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 04/12] eal: allow empty compile time flags Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 05/12] config: remove RTE_LIBNAME definition Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 06/12] memzone: refactor rte_memzone_reserve() variants Cyril Chemparathy
2015-06-22 18:58 ` Cyril Chemparathy [this message]
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 08/12] mempool: allow config override on element alignment Cyril Chemparathy
2015-06-23  0:31   ` Ananyev, Konstantin
2015-06-23 20:43     ` Cyril Chemparathy
2015-06-23 21:21       ` Ananyev, Konstantin
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 09/12] tile: add page sizes for TILE-Gx/Mx platforms Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 10/12] tile: initial TILE-Gx support Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 11/12] tile: Add TILE-Gx mPIPE poll mode driver Cyril Chemparathy
2015-06-22 18:58 ` [dpdk-dev] [PATCH v2 12/12] maintainers: claim responsibility for TILE-Gx platform Cyril Chemparathy
2015-06-24 16:42 ` [dpdk-dev] [PATCH v2 00/12] Introducing the " Cyril Chemparathy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434999524-26528-8-git-send-email-cchemparathy@ezchip.com \
    --to=cchemparathy@ezchip.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).