From: Wang Xiao W <xiao.w.wang@intel.com>
To: jing.d.chen@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 10/18] fm10k/base: do not use CamelCase
Date: Fri, 19 Feb 2016 19:06:57 +0800 [thread overview]
Message-ID: <1455880025-6912-11-git-send-email-xiao.w.wang@intel.com> (raw)
In-Reply-To: <1455880025-6912-1-git-send-email-xiao.w.wang@intel.com>
The upstream Linux kernel community prefers avoiding CamelCase in
variables, function names, etc.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
---
drivers/net/fm10k/base/fm10k_type.h | 14 +++++++-------
drivers/net/fm10k/fm10k_ethdev.c | 24 ++++++++++++------------
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/fm10k/base/fm10k_type.h b/drivers/net/fm10k/base/fm10k_type.h
index 98dbf6f..1e84294 100644
--- a/drivers/net/fm10k/base/fm10k_type.h
+++ b/drivers/net/fm10k/base/fm10k_type.h
@@ -531,13 +531,13 @@ struct fm10k_hw;
#endif
enum fm10k_int_source {
- fm10k_int_Mailbox = 0,
- fm10k_int_PCIeFault = 1,
- fm10k_int_SwitchUpDown = 2,
- fm10k_int_SwitchEvent = 3,
- fm10k_int_SRAM = 4,
- fm10k_int_VFLR = 5,
- fm10k_int_MaxHoldTime = 6,
+ fm10k_int_mailbox = 0,
+ fm10k_int_pcie_fault = 1,
+ fm10k_int_switch_up_down = 2,
+ fm10k_int_switch_event = 3,
+ fm10k_int_sram = 4,
+ fm10k_int_vflr = 5,
+ fm10k_int_max_hold_time = 6,
fm10k_int_sources_max_pf
};
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index 6d929cb..3ac08d0 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -2117,12 +2117,12 @@ fm10k_dev_enable_intr_pf(struct rte_eth_dev *dev)
/* Bind all local non-queue interrupt to vector 0 */
int_map |= FM10K_MISC_VEC_ID;
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_Mailbox), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_PCIeFault), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SwitchUpDown), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SwitchEvent), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SRAM), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_VFLR), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_mailbox), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_pcie_fault), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_switch_up_down), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_switch_event), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_sram), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_vflr), int_map);
/* Enable misc causes */
FM10K_WRITE_REG(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) |
@@ -2148,12 +2148,12 @@ fm10k_dev_disable_intr_pf(struct rte_eth_dev *dev)
int_map |= FM10K_MISC_VEC_ID;
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_Mailbox), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_PCIeFault), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SwitchUpDown), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SwitchEvent), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_SRAM), int_map);
- FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_VFLR), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_mailbox), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_pcie_fault), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_switch_up_down), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_switch_event), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_sram), int_map);
+ FM10K_WRITE_REG(hw, FM10K_INT_MAP(fm10k_int_vflr), int_map);
/* Disable misc causes */
FM10K_WRITE_REG(hw, FM10K_EIMR, FM10K_EIMR_DISABLE(PCA_FAULT) |
--
1.9.3
next prev parent reply other threads:[~2016-02-19 11:07 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-21 10:35 [dpdk-dev] [PATCH 00/16] fm10k: update shared code from ND team Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 01/16] fm10k/base: cleanup namespace pollution and correct typecast Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 02/16] fm10k/base: use bitshift for itr_scale Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 03/16] fm10k/base: reset max_queues on init_hw_vf failure Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 04/16] fm10k/base: document ITR scale workaround in VF TDLEN register Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 05/16] fm10k/base: fix checkpatch warning Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 06/16] fm10k/base: use BIT macro instead of open-coded bit-shifting of 1 Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 07/16] fm10k/base: do not use CamelCase Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 08/16] fm10k/base: use memcpy for mac addr copy Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 09/16] fm10k/base: allow removal of is_slot_appropriate function Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 10/16] fm10k/base: consistently use VLAN ID when referencing vid variables Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 11/16] fm10k/base: fix comment per upstream review changes Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 12/16] fm10k/base: TLV structures must be 4byte aligned, not 1byte aligned Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 13/16] fm10k/base: move constants to the right of binary operators Wang Xiao W
2016-01-21 10:35 ` [dpdk-dev] [PATCH 14/16] fm10k/base: minor cleanups Wang Xiao W
2016-01-21 10:36 ` [dpdk-dev] [PATCH 15/16] fm10k: use default mailbox message handler for pf Wang Xiao W
2016-01-22 21:31 ` Bruce Richardson
2016-01-25 2:31 ` Wang, Xiao W
2016-01-26 20:16 ` Bruce Richardson
2016-01-27 1:57 ` Wang, Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 00/16] fm10k: update shared code Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 01/16] fm10k: use default mailbox message handler for pf Wang Xiao W
2016-02-16 10:50 ` Bruce Richardson
2016-02-18 10:25 ` Wang, Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 00/18] fm10k: update shared code Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 01/18] fm10k: use default mailbox message handler for PF Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 02/18] fm10k/base: correct typecast in fm10k_update_xc_addr_pf Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 03/18] fm10k/base: cleanup namespace pollution Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 04/18] fm10k/base: use bitshift for itr_scale Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 05/18] fm10k/base: reset max_queues on init_hw_vf failure Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 06/18] fm10k/base: document ITR scale workaround in VF TDLEN register Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 07/18] fm10k/base: cleanup lines over 80 characters Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 08/18] fm10k/base: cleanup useless else Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 09/18] fm10k/base: use BIT macro instead of open-coded bit-shifting of 1 Wang Xiao W
2016-02-19 11:06 ` Wang Xiao W [this message]
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 11/18] fm10k/base: use memcpy for mac addr copy Wang Xiao W
2016-02-19 11:06 ` [dpdk-dev] [PATCH v3 12/18] fm10k/base: allow removal of is_slot_appropriate function Wang Xiao W
2016-02-19 11:07 ` [dpdk-dev] [PATCH v3 13/18] fm10k/base: consistently use VLAN ID when referencing vid variables Wang Xiao W
2016-02-19 11:07 ` [dpdk-dev] [PATCH v3 14/18] fm10k/base: imporve comment per upstream review changes Wang Xiao W
2016-02-19 11:07 ` [dpdk-dev] [PATCH v3 15/18] fm10k/base: fix TLV structures alignment Wang Xiao W
2016-02-19 11:07 ` [dpdk-dev] [PATCH v3 16/18] fm10k/base: move constants to the right of binary operators Wang Xiao W
2016-02-19 11:07 ` [dpdk-dev] [PATCH v3 17/18] fm10k/base: minor cleanups Wang Xiao W
2016-02-19 11:07 ` [dpdk-dev] [PATCH v3 18/18] fm10k/base: remove unused struct element Wang Xiao W
2016-02-29 2:30 ` [dpdk-dev] [PATCH v3 00/18] fm10k: update shared code Ding, HengX
2016-03-08 16:27 ` Bruce Richardson
2016-03-08 13:24 ` Bruce Richardson
2016-03-08 14:15 ` Wang, Xiao W
2016-03-08 14:25 ` Chen, Jing D
2016-03-08 14:32 ` Wang, Xiao W
2016-03-08 14:53 ` Bruce Richardson
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 02/16] fm10k/base: add macro definitions that are needed Wang Xiao W
2016-02-16 10:52 ` Bruce Richardson
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 03/16] fm10k/base: cleanup namespace pollution and correct typecast Wang Xiao W
2016-02-16 10:55 ` Bruce Richardson
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 04/16] fm10k/base: use bitshift for itr_scale Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 05/16] fm10k/base: reset max_queues on init_hw_vf failure Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 06/16] fm10k/base: document ITR scale workaround in VF TDLEN register Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 07/16] fm10k/base: fix checkpatch warning Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 08/16] fm10k/base: use BIT macro instead of open-coded bit-shifting of 1 Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 09/16] fm10k/base: do not use CamelCase Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 10/16] fm10k/base: use memcpy for mac addr copy Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 11/16] fm10k/base: allow removal of is_slot_appropriate function Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 12/16] fm10k/base: consistently use VLAN ID when referencing vid variables Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 13/16] fm10k/base: fix comment per upstream review changes Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 14/16] fm10k/base: TLV structures must be 4byte aligned, not 1byte aligned Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 15/16] fm10k/base: move constants to the right of binary operators Wang Xiao W
2016-01-27 3:50 ` [dpdk-dev] [PATCH v2 16/16] fm10k/base: minor cleanups Wang Xiao W
2016-02-16 8:11 ` [dpdk-dev] [PATCH v2 00/16] fm10k: update shared code Chen, Jing D
2016-01-21 10:36 ` [dpdk-dev] [PATCH 16/16] fm10k/base: add macro definitions that are needed Wang Xiao W
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455880025-6912-11-git-send-email-xiao.w.wang@intel.com \
--to=xiao.w.wang@intel.com \
--cc=dev@dpdk.org \
--cc=jing.d.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).