[dpdk-dev] [RFC 1/2] doc: add doc with steps to build PMD and run testpmd

[Shijith Thotton <shijith.thotton@caviumnetworks.com>]

Add a new document with steps to build PMDs and launch a sample test
application, "testpmd". It can be included in other PMD documentations
or be referred.

Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
---
 doc/guides/nics/build_and_run.inc | 110 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 doc/guides/nics/build_and_run.inc

diff --git a/doc/guides/nics/build_and_run.inc b/doc/guides/nics/build_and_run.inc
new file mode 100644
index 0000000..7d59c6c
--- /dev/null
+++ b/doc/guides/nics/build_and_run.inc
@@ -0,0 +1,110 @@
+..  BSD LICENSE
+    Copyright(c) 2017 Cavium, Inc.. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Cavium, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+.. _pmd_build_and_run:
+
+Driver Compilation
+------------------
+
+To compile PMD for Linux x86_64 gcc target, run the following "make" command:
+
+.. code-block:: console
+
+   cd <DPDK-source-directory>
+   make install T=x86_64-native-linuxapp-gcc
+
+FreeBSD targets should use "gmake" command instead of "make".
+
+For more information, refer :ref:`Getting Started Guide for Linux <linux_gsg>` or
+:ref:`Getting Started Guide for FreeBSD <freebsd_gsg>` depending on your platform.
+
+
+
+Running testpmd in Linux
+------------------------
+
+This section demonstrates how to launch ``testpmd`` in Linux.
+
+#. Mount huge pages:
+
+   .. code-block:: console
+
+      mkdir /mnt/huge
+      mount -t hugetlbfs nodev /mnt/huge
+
+#. Request huge pages:
+
+   .. code-block:: console
+
+      echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages
+
+#. Load ``igb_uio`` or ``vfio-pci`` driver:
+
+   .. code-block:: console
+
+      modprobe uio
+      insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+
+   or
+
+   .. code-block:: console
+
+      modprobe vfio-pci
+
+#. Setup VFIO permissions for regular users before binding to ``vfio-pci``:
+
+   .. code-block:: console
+
+      sudo chmod a+x /dev/vfio
+
+      sudo chmod 0666 /dev/vfio/*
+
+#. Bind the adapters to ``igb_uio`` or ``vfio-pci`` loaded in the previous step:
+
+   .. code-block:: console
+
+      ./usertools/dpdk-devbind.py --bind igb_uio DEVICE1 DEVICE2
+
+   Or setup VFIO permissions for regular users and then bind to ``vfio-pci``:
+
+   .. code-block:: console
+
+      ./usertools/dpdk-devbind.py --bind vfio-pci DEVICE1 DEVICE2
+
+   .. note::
+
+       DEVICE1, DEVICE2 are specified via PCI "domain:bus:slot.func" syntax
+       or "bus:slot.func" syntax.
+
+#. Start ``testpmd`` with basic parameters:
+
+   .. code-block:: console
+
+      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- -i
-- 
1.8.3.1