[dpdk-dev] [PATCH v2] bus/pci: use device driver name instead of handler type

[Alejandro Lucero <alejandro.lucero@netronome.com>]

Invoking the right pci read/write functions is based on interrupt
handler type. However, this is not configured for secondary processes
precluding to use those functions.

This patch fixes the issue using the driver name the device is bound
to instead.

Fixes: 632b2d1deeed ("eal: provide functions to access PCI config")

v2:
 - Use #ifdef for VFIO functions

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
---
 drivers/bus/pci/linux/pci.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index 5cf78d7..59a2086 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -673,23 +673,21 @@ enum rte_iova_mode
 int rte_pci_read_config(const struct rte_pci_device *device,
 		void *buf, size_t len, off_t offset)
 {
+	char devname[RTE_DEV_NAME_MAX_LEN] = {0};
 	const struct rte_intr_handle *intr_handle = &device->intr_handle;
 
-	switch (intr_handle->type) {
-	case RTE_INTR_HANDLE_UIO:
-	case RTE_INTR_HANDLE_UIO_INTX:
+	switch (device->kdrv) {
+	case RTE_KDRV_IGB_UIO:
 		return pci_uio_read_config(intr_handle, buf, len, offset);
-
 #ifdef VFIO_PRESENT
-	case RTE_INTR_HANDLE_VFIO_MSIX:
-	case RTE_INTR_HANDLE_VFIO_MSI:
-	case RTE_INTR_HANDLE_VFIO_LEGACY:
+	case RTE_KDRV_VFIO:
 		return pci_vfio_read_config(intr_handle, buf, len, offset);
 #endif
 	default:
+		rte_pci_device_name(&device->addr, devname,
+				    RTE_DEV_NAME_MAX_LEN);
 		RTE_LOG(ERR, EAL,
-			"Unknown handle type of fd %d\n",
-					intr_handle->fd);
+			"Unknown driver type for %s\n", devname);
 		return -1;
 	}
 }
@@ -698,23 +696,21 @@ int rte_pci_read_config(const struct rte_pci_device *device,
 int rte_pci_write_config(const struct rte_pci_device *device,
 		const void *buf, size_t len, off_t offset)
 {
+	char devname[RTE_DEV_NAME_MAX_LEN] = {0};
 	const struct rte_intr_handle *intr_handle = &device->intr_handle;
 
-	switch (intr_handle->type) {
-	case RTE_INTR_HANDLE_UIO:
-	case RTE_INTR_HANDLE_UIO_INTX:
+	switch (device->kdrv) {
+	case RTE_KDRV_IGB_UIO:
 		return pci_uio_write_config(intr_handle, buf, len, offset);
-
 #ifdef VFIO_PRESENT
-	case RTE_INTR_HANDLE_VFIO_MSIX:
-	case RTE_INTR_HANDLE_VFIO_MSI:
-	case RTE_INTR_HANDLE_VFIO_LEGACY:
+	case RTE_KDRV_VFIO:
 		return pci_vfio_write_config(intr_handle, buf, len, offset);
 #endif
 	default:
+		rte_pci_device_name(&device->addr, devname,
+				    RTE_DEV_NAME_MAX_LEN);
 		RTE_LOG(ERR, EAL,
-			"Unknown handle type of fd %d\n",
-					intr_handle->fd);
+			"Unknown driver type for %s\n", devname);
 		return -1;
 	}
 }
-- 
1.9.1