From: Lee Daly <lee.daly@intel.com>
To: akhil.goyal@nxp.com
Cc: dev@dpdk.org, Lee Daly <lee.daly@intel.com>
Subject: [dpdk-dev] [PATCH v3 1/3] compress/isal: enable checksum support in driver
Date: Thu, 13 Dec 2018 10:42:30 +0000 [thread overview]
Message-ID: <1544697752-156863-1-git-send-email-lee.daly@intel.com> (raw)
In-Reply-To: <1543401707-87314-1-git-send-email-lee.daly@intel.com>
This patch adds checksum support in the ISA-L PMD for both compression
and decompression.
CRC32 is supported as well as Adler32.
V2:
Documentation Changes
V3:
Added Release note
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
---
drivers/compress/isal/isal_compress_pmd.c | 80 ++++++++++++++++++++++-----
drivers/compress/isal/isal_compress_pmd_ops.c | 4 +-
2 files changed, 69 insertions(+), 15 deletions(-)
diff --git a/drivers/compress/isal/isal_compress_pmd.c b/drivers/compress/isal/isal_compress_pmd.c
index 9f1e968..b087ed8 100644
--- a/drivers/compress/isal/isal_compress_pmd.c
+++ b/drivers/compress/isal/isal_compress_pmd.c
@@ -16,6 +16,8 @@
#define RTE_COMP_ISAL_LEVEL_ONE 1
#define RTE_COMP_ISAL_LEVEL_TWO 2
#define RTE_COMP_ISAL_LEVEL_THREE 3 /* Optimised for AVX512 & AVX2 only */
+#define CHKSUM_SZ_CRC 8
+#define CHKSUM_SZ_ADLER 4
int isal_logtype_driver;
@@ -43,12 +45,6 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
}
priv_xform->compress.algo = RTE_COMP_ALGO_DEFLATE;
- /* Set private xform checksum - raw deflate by default */
- if (xform->compress.chksum != RTE_COMP_CHECKSUM_NONE) {
- ISAL_PMD_LOG(ERR, "Checksum not supported\n");
- return -ENOTSUP;
- }
-
/* Set private xform window size, 32K supported */
if (xform->compress.window_size == RTE_COMP_ISAL_WINDOW_SIZE)
priv_xform->compress.window_size =
@@ -77,6 +73,27 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
return -ENOTSUP;
}
+ /* Set private xform checksum */
+ switch (xform->compress.chksum) {
+ /* Raw deflate by default */
+ case(RTE_COMP_CHECKSUM_NONE):
+ priv_xform->compress.chksum = IGZIP_DEFLATE;
+ break;
+ case(RTE_COMP_CHECKSUM_CRC32):
+ priv_xform->compress.chksum = IGZIP_GZIP_NO_HDR;
+ break;
+ case(RTE_COMP_CHECKSUM_ADLER32):
+ priv_xform->compress.chksum = IGZIP_ZLIB_NO_HDR;
+ break;
+ case(RTE_COMP_CHECKSUM_CRC32_ADLER32):
+ ISAL_PMD_LOG(ERR, "Combined CRC and ADLER checksum not"
+ " supported\n");
+ return -ENOTSUP;
+ default:
+ ISAL_PMD_LOG(ERR, "Checksum type not supported\n");
+ return -ENOTSUP;
+ }
+
/* Set private xform level.
* Checking compliance with compressdev API, -1 <= level => 9
*/
@@ -170,9 +187,24 @@ isal_comp_set_priv_xform_parameters(struct isal_priv_xform *priv_xform,
}
priv_xform->decompress.algo = RTE_COMP_ALGO_DEFLATE;
- /* Set private xform checksum - raw deflate by default */
- if (xform->compress.chksum != RTE_COMP_CHECKSUM_NONE) {
- ISAL_PMD_LOG(ERR, "Checksum not supported\n");
+ /* Set private xform checksum */
+ switch (xform->decompress.chksum) {
+ /* Raw deflate by default */
+ case(RTE_COMP_CHECKSUM_NONE):
+ priv_xform->decompress.chksum = ISAL_DEFLATE;
+ break;
+ case(RTE_COMP_CHECKSUM_CRC32):
+ priv_xform->decompress.chksum = ISAL_GZIP_NO_HDR_VER;
+ break;
+ case(RTE_COMP_CHECKSUM_ADLER32):
+ priv_xform->decompress.chksum = ISAL_ZLIB_NO_HDR_VER;
+ break;
+ case(RTE_COMP_CHECKSUM_CRC32_ADLER32):
+ ISAL_PMD_LOG(ERR, "Combined CRC and ADLER checksum not"
+ " supported\n");
+ return -ENOTSUP;
+ default:
+ ISAL_PMD_LOG(ERR, "Checksum type not supported\n");
return -ENOTSUP;
}
@@ -376,6 +408,9 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
qp->stream->level_buf = temp_level_buf;
+ /* Set Checksum flag */
+ qp->stream->gzip_flag = priv_xform->compress.chksum;
+
/* Stateless operation, input will be consumed in one go */
qp->stream->flush = NO_FLUSH;
@@ -459,8 +494,18 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
return ret;
}
}
+
op->consumed = qp->stream->total_in;
- op->produced = qp->stream->total_out;
+ if (qp->stream->gzip_flag == IGZIP_DEFLATE) {
+ op->produced = qp->stream->total_out;
+ } else if (qp->stream->gzip_flag == IGZIP_ZLIB_NO_HDR) {
+ op->produced = qp->stream->total_out - CHKSUM_SZ_ADLER;
+ op->output_chksum = qp->stream->internal_state.crc + 1;
+ } else {
+ op->produced = qp->stream->total_out - CHKSUM_SZ_CRC;
+ op->output_chksum = qp->stream->internal_state.crc;
+ }
+
isal_deflate_reset(qp->stream);
return ret;
@@ -468,7 +513,8 @@ process_isal_deflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
/* Stateless Decompression Function */
static int
-process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
+process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp,
+ struct isal_priv_xform *priv_xform)
{
int ret = 0;
@@ -477,6 +523,9 @@ process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
/* Initialize decompression state */
isal_inflate_init(qp->state);
+ /* Set Checksum flag */
+ qp->state->crc_flag = priv_xform->decompress.chksum;
+
if (op->m_src->pkt_len < (op->src.length + op->src.offset)) {
ISAL_PMD_LOG(ERR, "Input mbuf(s) not big enough.\n");
op->status = RTE_COMP_OP_STATUS_INVALID_ARGS;
@@ -531,13 +580,16 @@ process_isal_inflate(struct rte_comp_op *op, struct isal_comp_qp *qp)
return -1;
}
- if (ret != ISAL_DECOMP_OK) {
+ if (ret != ISAL_DECOMP_OK && ret != ISAL_END_INPUT) {
+ ISAL_PMD_LOG(ERR, "Decompression operation failed\n");
op->status = RTE_COMP_OP_STATUS_ERROR;
return ret;
}
op->consumed = op->src.length - qp->state->avail_in;
}
- op->produced = qp->state->total_out;
+ op->produced = qp->state->total_out;
+ op->output_chksum = qp->state->crc;
+
isal_inflate_reset(qp->state);
return ret;
@@ -553,7 +605,7 @@ process_op(struct isal_comp_qp *qp, struct rte_comp_op *op,
process_isal_deflate(op, qp, priv_xform);
break;
case RTE_COMP_DECOMPRESS:
- process_isal_inflate(op, qp);
+ process_isal_inflate(op, qp, priv_xform);
break;
default:
ISAL_PMD_LOG(ERR, "Operation Not Supported\n");
diff --git a/drivers/compress/isal/isal_compress_pmd_ops.c b/drivers/compress/isal/isal_compress_pmd_ops.c
index 41cade8..7b91849 100644
--- a/drivers/compress/isal/isal_compress_pmd_ops.c
+++ b/drivers/compress/isal/isal_compress_pmd_ops.c
@@ -17,7 +17,9 @@ static const struct rte_compressdev_capabilities isal_pmd_capabilities[] = {
RTE_COMP_FF_OOP_LB_IN_SGL_OUT |
RTE_COMP_FF_SHAREABLE_PRIV_XFORM |
RTE_COMP_FF_HUFFMAN_FIXED |
- RTE_COMP_FF_HUFFMAN_DYNAMIC,
+ RTE_COMP_FF_HUFFMAN_DYNAMIC |
+ RTE_COMP_FF_CRC32_CHECKSUM |
+ RTE_COMP_FF_ADLER32_CHECKSUM,
.window_size = {
.min = 15,
.max = 15,
--
2.7.4
next prev parent reply other threads:[~2018-12-13 10:42 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 16:21 [dpdk-dev] [PATCH " Lee Daly
2018-10-09 16:21 ` [dpdk-dev] [PATCH 2/3] test/compress: add checksum tests Lee Daly
2018-10-11 10:37 ` Trahe, Fiona
2018-10-09 16:21 ` [dpdk-dev] [PATCH 3/3] doc: update ISA-L guide to reflect checksum support Lee Daly
2018-10-11 10:04 ` Trahe, Fiona
2018-11-28 10:41 ` [dpdk-dev] [PATCH v2 1/3] compress/isal: enable checksum support in driver Lee Daly
2018-11-28 10:41 ` [dpdk-dev] [PATCH v2 2/3] test/compress: add checksum tests Lee Daly
2018-12-05 13:57 ` Jozwiak, TomaszX
2018-12-12 0:25 ` Trahe, Fiona
2018-11-28 10:41 ` [dpdk-dev] [PATCH v2 3/3] doc: update ISA-L guide to reflect checksum support Lee Daly
2018-12-12 0:27 ` Trahe, Fiona
2018-12-12 0:10 ` [dpdk-dev] [PATCH v2 1/3] compress/isal: enable checksum support in driver Trahe, Fiona
2018-12-13 10:42 ` Lee Daly [this message]
2018-12-13 10:42 ` [dpdk-dev] [PATCH v3 2/3] test/compress: add checksum tests Lee Daly
2018-12-13 10:42 ` [dpdk-dev] [PATCH v3 3/3] doc: update ISA-L guide to reflect checksum support Lee Daly
2018-12-28 5:04 ` Varghese, Vipin
2019-01-07 10:37 ` Daly, Lee
2019-01-07 13:31 ` Varghese, Vipin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544697752-156863-1-git-send-email-lee.daly@intel.com \
--to=lee.daly@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).