DPDK patches and discussions
 help / color / mirror / Atom feed
From: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
To: dev@dpdk.org
Cc: matan@mellanox.com, rasland@mellanox.com, olivier.matz@6wind.com,
	arybchenko@solarflare.com, thomas@monjalon.net,
	ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH v7 2/2] app/testpmd: add send scheduling test capability
Date: Fri, 10 Jul 2020 12:39:42 +0000	[thread overview]
Message-ID: <1594384782-17799-2-git-send-email-viacheslavo@mellanox.com> (raw)
In-Reply-To: <1594384782-17799-1-git-send-email-viacheslavo@mellanox.com>

This commit adds testpmd capability to provide timestamps on the packets
being sent in the txonly mode. This includes:

 - SEND_ON_TIMESTAMP support
   new device Tx offload capability support added, example:

     testpmd> port config 0 tx_offload send_on_timestamp on

 - set txtimes, registers field and flag, example:

     testpmd> set txtimes 1000000,0

   This command enables the packet send scheduling on timestamps if
   the first parameter is not zero, generic format:

     testpmd> set txtimes (inter),(intra)

   where:

     inter - is the delay between the bursts in the device clock units.
     If "intra" (next parameter) is zero, this is the time between the
     beginnings of the first packets in the neighbour bursts, if "intra"
     is not zero, "inter" specifies the time between the beginning of the
     first packet of the current burst and the beginning of the last packet
     of the previous burst. If "inter"parameter is zero the send scheduling
     on timestamps is disabled (default).

     intra - is the delay between the packets within the burst specified
     in the device clock units. The number of packets in the burst is
     defined by regular burst setting. If "intra" parameter is zero no
     timestamps provided in the packets excepting  the first one in
     the burst.

     As the result the bursts of packet will be transmitted with
     specific delay between the packets within the burst and specific
     delay between the bursts. The rte_eth_read_clock() is supposed to be
     engaged to get the current device clock value and provide
     the reference for the timestamps. If there is no supported
     rte_eth_read_clock() there will be no provided send scheduling
     on the device.

 - show txtimes, displays the timing settings
 - txonly burst time pattern

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 app/test-pmd/cmdline.c                      | 63 ++++++++++++++++++++--
 app/test-pmd/config.c                       | 61 +++++++++++++++++++++
 app/test-pmd/testpmd.c                      |  6 +++
 app/test-pmd/testpmd.h                      |  4 ++
 app/test-pmd/txonly.c                       | 83 +++++++++++++++++++++++++++--
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 38 ++++++++++++-
 6 files changed, 246 insertions(+), 9 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 39ad938..def0709 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -294,6 +294,10 @@ static void cmd_help_long_parsed(void *parsed_result,
 			" Right now only applicable for CSUM and TXONLY"
 			" modes\n\n"
 
+			"set txtimes (x, y)\n"
+			"    Set the scheduling on timestamps"
+			" timings for the TXOMLY mode\n\n"
+
 			"set corelist (x[,y]*)\n"
 			"    Set the list of forwarding cores.\n\n"
 
@@ -3930,6 +3934,52 @@ struct cmd_set_txsplit_result {
 	},
 };
 
+/* *** SET TIMES FOR TXONLY PACKETS SCHEDULING ON TIMESTAMPS *** */
+
+struct cmd_set_txtimes_result {
+	cmdline_fixed_string_t cmd_keyword;
+	cmdline_fixed_string_t txtimes;
+	cmdline_fixed_string_t tx_times;
+};
+
+static void
+cmd_set_txtimes_parsed(void *parsed_result,
+		       __rte_unused struct cmdline *cl,
+		       __rte_unused void *data)
+{
+	struct cmd_set_txtimes_result *res;
+	unsigned int tx_times[2] = {0, 0};
+	unsigned int n_times;
+
+	res = parsed_result;
+	n_times = parse_item_list(res->tx_times, "tx times",
+				  2, tx_times, 0);
+	if (n_times == 2)
+		set_tx_pkt_times(tx_times);
+}
+
+cmdline_parse_token_string_t cmd_set_txtimes_keyword =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_txtimes_result,
+				 cmd_keyword, "set");
+cmdline_parse_token_string_t cmd_set_txtimes_name =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_txtimes_result,
+				 txtimes, "txtimes");
+cmdline_parse_token_string_t cmd_set_txtimes_value =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_txtimes_result,
+				 tx_times, NULL);
+
+cmdline_parse_inst_t cmd_set_txtimes = {
+	.f = cmd_set_txtimes_parsed,
+	.data = NULL,
+	.help_str = "set txtimes <inter_burst>,<intra_burst>",
+	.tokens = {
+		(void *)&cmd_set_txtimes_keyword,
+		(void *)&cmd_set_txtimes_name,
+		(void *)&cmd_set_txtimes_value,
+		NULL,
+	},
+};
+
 /* *** ADD/REMOVE ALL VLAN IDENTIFIERS TO/FROM A PORT VLAN RX FILTER *** */
 struct cmd_rx_vlan_filter_all_result {
 	cmdline_fixed_string_t rx_vlan;
@@ -7418,6 +7468,8 @@ static void cmd_showcfg_parsed(void *parsed_result,
 		pkt_fwd_config_display(&cur_fwd_config);
 	else if (!strcmp(res->what, "txpkts"))
 		show_tx_pkt_segments();
+	else if (!strcmp(res->what, "txtimes"))
+		show_tx_pkt_times();
 }
 
 cmdline_parse_token_string_t cmd_showcfg_show =
@@ -7426,12 +7478,12 @@ static void cmd_showcfg_parsed(void *parsed_result,
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, cfg, "config");
 cmdline_parse_token_string_t cmd_showcfg_what =
 	TOKEN_STRING_INITIALIZER(struct cmd_showcfg_result, what,
-				 "rxtx#cores#fwd#txpkts");
+				 "rxtx#cores#fwd#txpkts#txtimes");
 
 cmdline_parse_inst_t cmd_showcfg = {
 	.f = cmd_showcfg_parsed,
 	.data = NULL,
-	.help_str = "show config rxtx|cores|fwd|txpkts",
+	.help_str = "show config rxtx|cores|fwd|txpkts|txtimes",
 	.tokens = {
 		(void *)&cmd_showcfg_show,
 		(void *)&cmd_showcfg_port,
@@ -18670,7 +18722,8 @@ struct cmd_config_per_port_tx_offload_result {
 			  "sctp_cksum#tcp_tso#udp_tso#outer_ipv4_cksum#"
 			  "qinq_insert#vxlan_tnl_tso#gre_tnl_tso#"
 			  "ipip_tnl_tso#geneve_tnl_tso#macsec_insert#"
-			  "mt_lockfree#multi_segs#mbuf_fast_free#security");
+			  "mt_lockfree#multi_segs#mbuf_fast_free#security#"
+			  "send_on_timestamp");
 cmdline_parse_token_string_t cmd_config_per_port_tx_offload_result_on_off =
 	TOKEN_STRING_INITIALIZER
 		(struct cmd_config_per_port_tx_offload_result,
@@ -18755,7 +18808,8 @@ struct cmd_config_per_port_tx_offload_result {
 		    "sctp_cksum|tcp_tso|udp_tso|outer_ipv4_cksum|"
 		    "qinq_insert|vxlan_tnl_tso|gre_tnl_tso|"
 		    "ipip_tnl_tso|geneve_tnl_tso|macsec_insert|"
-		    "mt_lockfree|multi_segs|mbuf_fast_free|security on|off",
+		    "mt_lockfree|multi_segs|mbuf_fast_free|security|"
+		    "send_on_timestamp on|off",
 	.tokens = {
 		(void *)&cmd_config_per_port_tx_offload_result_port,
 		(void *)&cmd_config_per_port_tx_offload_result_config,
@@ -19427,6 +19481,7 @@ struct cmd_showport_macs_result {
 	(cmdline_parse_inst_t *)&cmd_set_log,
 	(cmdline_parse_inst_t *)&cmd_set_txpkts,
 	(cmdline_parse_inst_t *)&cmd_set_txsplit,
+	(cmdline_parse_inst_t *)&cmd_set_txtimes,
 	(cmdline_parse_inst_t *)&cmd_set_fwd_list,
 	(cmdline_parse_inst_t *)&cmd_set_fwd_mask,
 	(cmdline_parse_inst_t *)&cmd_set_fwd_mode,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 53a9b97..48a8790 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1046,6 +1046,15 @@ static int bus_match_all(const struct rte_bus *bus, const void *data)
 			printf("off\n");
 	}
 
+	if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP) {
+		printf("Tx scheduling on timestamp:    ");
+		if (ports[port_id].dev_conf.txmode.offloads &
+		    DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP)
+			printf("on\n");
+		else
+			printf("off\n");
+	}
+
 }
 
 int
@@ -3067,6 +3076,58 @@ struct igb_ring_desc_16_bytes {
 }
 
 void
+show_tx_pkt_times(void)
+{
+	printf("Interburst gap: %u\n", tx_pkt_times_inter);
+	printf("Intraburst gap: %u\n", tx_pkt_times_intra);
+}
+
+void
+set_tx_pkt_times(unsigned int *tx_times)
+{
+	uint16_t port_id;
+	int offload_found = 0;
+	int offset;
+	int flag;
+
+	static const struct rte_mbuf_dynfield desc_offs = {
+		.name = RTE_MBUF_DYNFIELD_TIMESTAMP_NAME,
+		.size = sizeof(uint64_t),
+		.align = __alignof__(uint64_t),
+	};
+	static const struct rte_mbuf_dynflag desc_flag = {
+		.name = RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME,
+	};
+
+	RTE_ETH_FOREACH_DEV(port_id) {
+		struct rte_eth_dev_info dev_info = { 0 };
+		int ret;
+
+		ret = rte_eth_dev_info_get(port_id, &dev_info);
+		if (ret == 0 && dev_info.tx_offload_capa &
+				DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP) {
+			offload_found = 1;
+			break;
+		}
+	}
+	if (!offload_found) {
+		printf("No device supporting Tx timestamp scheduling found, "
+		       "dynamic flag and field not registered\n");
+		return;
+	}
+	offset = rte_mbuf_dynfield_register(&desc_offs);
+	if (offset < 0 && rte_errno != EEXIST)
+		printf("Dynamic timestamp field registration error: %d",
+		       rte_errno);
+	flag = rte_mbuf_dynflag_register(&desc_flag);
+	if (flag < 0 && rte_errno != EEXIST)
+		printf("Dynamic timestamp flag registration error: %d",
+		       rte_errno);
+	tx_pkt_times_inter = tx_times[0];
+	tx_pkt_times_intra = tx_times[1];
+}
+
+void
 setup_gro(const char *onoff, portid_t port_id)
 {
 	if (!rte_eth_dev_is_valid_port(port_id)) {
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index f5feb62..d1216e0 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -223,6 +223,12 @@ struct fwd_engine * fwd_engines[] = {
 uint8_t txonly_multi_flow;
 /**< Whether multiple flows are generated in TXONLY mode. */
 
+uint32_t tx_pkt_times_inter;
+/**< Timings for send scheduling in TXONLY mode, time between bursts. */
+
+uint32_t tx_pkt_times_intra;
+/**< Timings for send scheduling in TXONLY mode, time between packets. */
+
 uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
 uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
 
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index a803750..9825649 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -442,6 +442,8 @@ struct queue_stats_mappings {
 extern uint16_t tx_pkt_length; /**< Length of TXONLY packet */
 extern uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT]; /**< Seg. lengths */
 extern uint8_t  tx_pkt_nb_segs; /**< Number of segments in TX packets */
+extern uint32_t tx_pkt_times_intra;
+extern uint32_t tx_pkt_times_inter;
 
 enum tx_pkt_split {
 	TX_PKT_SPLIT_OFF,
@@ -794,6 +796,8 @@ void vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type,
 void set_verbose_level(uint16_t vb_level);
 void set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs);
 void show_tx_pkt_segments(void);
+void set_tx_pkt_times(unsigned int *tx_times);
+void show_tx_pkt_times(void);
 void set_tx_pkt_split(const char *name);
 void set_nb_pkt_per_burst(uint16_t pkt_burst);
 char *list_pkt_forwarding_modes(void);
diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c
index 076ccaf..97f4a45 100644
--- a/app/test-pmd/txonly.c
+++ b/app/test-pmd/txonly.c
@@ -53,6 +53,12 @@
 static struct rte_ipv4_hdr pkt_ip_hdr; /**< IP header of transmitted packets. */
 RTE_DEFINE_PER_LCORE(uint8_t, _ip_var); /**< IP address variation */
 static struct rte_udp_hdr pkt_udp_hdr; /**< UDP header of tx packets. */
+RTE_DEFINE_PER_LCORE(uint64_t, timestamp_qskew);
+					/**< Timestamp offset per queue */
+static uint64_t timestamp_mask; /**< Timestamp dynamic flag mask */
+static int32_t timestamp_off; /**< Timestamp dynamic field offset */
+static bool timestamp_enable; /**< Timestamp enable */
+static uint64_t timestamp_initial[RTE_MAX_ETHPORTS];
 
 static void
 copy_buf_to_pkt_segs(void* buf, unsigned len, struct rte_mbuf *pkt,
@@ -150,7 +156,8 @@
 static inline bool
 pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp,
 		struct rte_ether_hdr *eth_hdr, const uint16_t vlan_tci,
-		const uint16_t vlan_tci_outer, const uint64_t ol_flags)
+		const uint16_t vlan_tci_outer, const uint64_t ol_flags,
+		const uint16_t idx, const struct fwd_stream *fs)
 {
 	struct rte_mbuf *pkt_segs[RTE_MAX_SEGS_PER_PKT];
 	struct rte_mbuf *pkt_seg;
@@ -213,6 +220,53 @@
 	copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt,
 			sizeof(struct rte_ether_hdr) +
 			sizeof(struct rte_ipv4_hdr));
+	if (unlikely(timestamp_enable)) {
+		uint64_t skew = RTE_PER_LCORE(timestamp_qskew);
+		struct {
+			rte_be32_t signature;
+			rte_be16_t pkt_idx;
+			rte_be16_t queue_idx;
+			rte_be64_t ts;
+		} timestamp_mark;
+
+		if (unlikely(!skew)) {
+			struct rte_eth_dev *dev = &rte_eth_devices[fs->tx_port];
+			unsigned int txqs_n = dev->data->nb_tx_queues;
+			uint64_t phase = tx_pkt_times_inter * fs->tx_queue /
+					 (txqs_n ? txqs_n : 1);
+			/*
+			 * Initialize the scheduling time phase shift
+			 * depending on queue index.
+			 */
+			skew = timestamp_initial[fs->tx_port] +
+			       tx_pkt_times_inter + phase;
+			RTE_PER_LCORE(timestamp_qskew) = skew;
+		}
+		timestamp_mark.pkt_idx = rte_cpu_to_be_16(idx);
+		timestamp_mark.queue_idx = rte_cpu_to_be_16(fs->tx_queue);
+		timestamp_mark.signature = rte_cpu_to_be_32(0xBEEFC0DE);
+		if (unlikely(!idx)) {
+			skew +=	tx_pkt_times_inter;
+			pkt->ol_flags |= timestamp_mask;
+			*RTE_MBUF_DYNFIELD
+				(pkt, timestamp_off, uint64_t *) = skew;
+			RTE_PER_LCORE(timestamp_qskew) = skew;
+			timestamp_mark.ts = rte_cpu_to_be_64(skew);
+		} else if (tx_pkt_times_intra) {
+			skew +=	tx_pkt_times_intra;
+			pkt->ol_flags |= timestamp_mask;
+			*RTE_MBUF_DYNFIELD
+				(pkt, timestamp_off, uint64_t *) = skew;
+			RTE_PER_LCORE(timestamp_qskew) = skew;
+			timestamp_mark.ts = rte_cpu_to_be_64(skew);
+		} else {
+			timestamp_mark.ts = RTE_BE64(0);
+		}
+		copy_buf_to_pkt(&timestamp_mark, sizeof(timestamp_mark), pkt,
+			sizeof(struct rte_ether_hdr) +
+			sizeof(struct rte_ipv4_hdr) +
+			sizeof(pkt_udp_hdr));
+	}
 	/*
 	 * Complete first mbuf of packet and append it to the
 	 * burst of packets to be transmitted.
@@ -275,7 +329,8 @@
 			if (unlikely(!pkt_burst_prepare(pkts_burst[nb_pkt], mbp,
 							&eth_hdr, vlan_tci,
 							vlan_tci_outer,
-							ol_flags))) {
+							ol_flags,
+							nb_pkt, fs))) {
 				rte_mempool_put_bulk(mbp,
 						(void **)&pkts_burst[nb_pkt],
 						nb_pkt_per_burst - nb_pkt);
@@ -290,7 +345,8 @@
 			if (unlikely(!pkt_burst_prepare(pkt, mbp, &eth_hdr,
 							vlan_tci,
 							vlan_tci_outer,
-							ol_flags))) {
+							ol_flags,
+							nb_pkt, fs))) {
 				rte_pktmbuf_free(pkt);
 				break;
 			}
@@ -302,6 +358,7 @@
 		return;
 
 	nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue, pkts_burst, nb_pkt);
+
 	/*
 	 * Retry if necessary
 	 */
@@ -342,15 +399,33 @@
 }
 
 static void
-tx_only_begin(__rte_unused portid_t pi)
+tx_only_begin(portid_t pi)
 {
 	uint16_t pkt_data_len;
+	int dynf;
 
 	pkt_data_len = (uint16_t) (tx_pkt_length - (
 					sizeof(struct rte_ether_hdr) +
 					sizeof(struct rte_ipv4_hdr) +
 					sizeof(struct rte_udp_hdr)));
 	setup_pkt_udp_ip_headers(&pkt_ip_hdr, &pkt_udp_hdr, pkt_data_len);
+
+	timestamp_enable = false;
+	timestamp_mask = 0;
+	timestamp_off = -1;
+	RTE_PER_LCORE(timestamp_qskew) = 0;
+	dynf = rte_mbuf_dynflag_lookup
+				(RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME, NULL);
+	if (dynf >= 0)
+		timestamp_mask = 1ULL << dynf;
+	dynf = rte_mbuf_dynfield_lookup
+				(RTE_MBUF_DYNFIELD_TIMESTAMP_NAME, NULL);
+	if (dynf >= 0)
+		timestamp_off = dynf;
+	timestamp_enable = tx_pkt_times_inter &&
+			   timestamp_mask &&
+			   timestamp_off >= 0 &&
+			   !rte_eth_read_clock(pi, &timestamp_initial[pi]);
 }
 
 struct fwd_engine tx_only_engine = {
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a808b6a..3f54787 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -266,7 +266,7 @@ show config
 Displays the configuration of the application.
 The configuration comes from the command-line, the runtime or the application defaults::
 
-   testpmd> show config (rxtx|cores|fwd|txpkts)
+   testpmd> show config (rxtx|cores|fwd|txpkts|txtimes)
 
 The available information categories are:
 
@@ -278,6 +278,8 @@ The available information categories are:
 
 * ``txpkts``: Packets to TX configuration.
 
+* ``txtimes``: Burst time pattern for Tx only mode.
+
 For example:
 
 .. code-block:: console
@@ -725,6 +727,40 @@ Set the length of each segment of the TX-ONLY packets or length of packet for FL
 
 Where x[,y]* represents a CSV list of values, without white space.
 
+set txtimes
+~~~~~~~~~~~
+
+Configure the timing burst pattern for Tx only mode. This command enables
+the packet send scheduling on dynamic timestamp mbuf field and configures
+timing pattern in Tx only mode. In this mode, if scheduling is enabled
+application provides timestamps in the packets being sent. It is possible
+to configure delay (in unspecified device clock units) between bursts
+and between the packets within the burst::
+
+   testpmd> set txtimes (inter),(intra)
+
+where:
+
+* ``inter``  is the delay between the bursts in the device clock units.
+  If ``intra`` is zero, this is the time between the beginnings of the
+  first packets in the neighbour bursts, if ``intra`` is not zero,
+  ``inter`` specifies the time between the beginning of the first packet
+  of the current burst and the beginning of the last packet of the
+  previous burst. If ``inter`` parameter is zero the send scheduling
+  on timestamps is disabled (default).
+
+* ``intra`` is the delay between the packets within the burst specified
+  in the device clock units. The number of packets in the burst is defined
+  by regular burst setting. If ``intra`` parameter is zero no timestamps
+  provided in the packets excepting  the first one in the burst.
+
+As the result the bursts of packet will be transmitted with specific
+delays between the packets within the burst and specific delay between
+the bursts. The rte_eth_read_clock() must be supported by the device(s)
+and is supposed to be engaged to get the current device clock value
+and provide the reference for the timestamps. If there is no supported
+rte_eth_read_clock() there will be no send scheduling provided on the port.
+
 set txsplit
 ~~~~~~~~~~~
 
-- 
1.8.3.1


  reply	other threads:[~2020-07-10 12:39 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-10  6:38 [dpdk-dev] [RFC] mbuf: accurate packet Tx scheduling Viacheslav Ovsiienko
2020-06-10 13:33 ` Harman Kalra
2020-06-10 15:16   ` Slava Ovsiienko
2020-06-17 15:57     ` [dpdk-dev] [EXT] " Harman Kalra
2020-07-01 15:46       ` Slava Ovsiienko
2020-07-01 15:36 ` [dpdk-dev] [PATCH 1/2] mbuf: introduce " Viacheslav Ovsiienko
2020-07-01 15:36   ` [dpdk-dev] [PATCH 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 11:50   ` [dpdk-dev] [PATCH 1/2] mbuf: introduce accurate packet Tx scheduling Olivier Matz
2020-07-07 12:46     ` Slava Ovsiienko
2020-07-07 12:59 ` [dpdk-dev] [PATCH v2 " Viacheslav Ovsiienko
2020-07-07 12:59   ` [dpdk-dev] [PATCH v2 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 13:08 ` [dpdk-dev] [PATCH v3 1/2] mbuf: introduce accurate packet Tx scheduling Viacheslav Ovsiienko
2020-07-07 13:08   ` [dpdk-dev] [PATCH v3 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 14:32   ` [dpdk-dev] [PATCH v3 1/2] mbuf: introduce accurate packet Tx scheduling Olivier Matz
2020-07-07 14:57 ` [dpdk-dev] [PATCH v4 " Viacheslav Ovsiienko
2020-07-07 14:57   ` [dpdk-dev] [PATCH v4 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-07 15:23   ` [dpdk-dev] [PATCH v4 1/2] mbuf: introduce accurate packet Tx scheduling Olivier Matz
2020-07-08 14:16   ` [dpdk-dev] [PATCH v4 1/2] mbuf: introduce accurate packet Txscheduling Morten Brørup
2020-07-08 14:54     ` Slava Ovsiienko
2020-07-08 15:27       ` Morten Brørup
2020-07-08 15:51         ` Slava Ovsiienko
2020-07-08 15:47 ` [dpdk-dev] [PATCH v5 1/2] mbuf: introduce accurate packet Tx scheduling Viacheslav Ovsiienko
2020-07-08 15:47   ` [dpdk-dev] [PATCH v5 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-08 16:05   ` [dpdk-dev] [PATCH v5 1/2] mbuf: introduce accurate packet Tx scheduling Slava Ovsiienko
2020-07-09 12:26   ` Thomas Monjalon
2020-07-09 12:36 ` [dpdk-dev] [PATCH v6 " Viacheslav Ovsiienko
2020-07-09 12:36   ` [dpdk-dev] [PATCH v6 2/2] app/testpmd: add send scheduling test capability Viacheslav Ovsiienko
2020-07-09 23:58     ` Ferruh Yigit
2020-07-10 12:41       ` Slava Ovsiienko
2020-07-09 23:47   ` [dpdk-dev] [PATCH v6 1/2] mbuf: introduce accurate packet Tx scheduling Ferruh Yigit
2020-07-10 12:32     ` Slava Ovsiienko
2020-07-10 12:39 ` [dpdk-dev] [PATCH v7 " Viacheslav Ovsiienko
2020-07-10 12:39   ` Viacheslav Ovsiienko [this message]
2020-07-10 15:46   ` Slava Ovsiienko
2020-07-10 22:07     ` Ferruh Yigit
2020-07-15  6:21 ` [dpdk-dev] [PATCH v2 00/17] net/mlx5: " Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 01/17] common/mlx5: update common part to support packet pacing Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 02/17] net/mlx5: introduce send scheduling devargs Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 03/17] net/mlx5: fix UAR lock sharing for multiport devices Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 04/17] net/mlx5: introduce shared UAR resource Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 05/17] net/mlx5: create clock queue for packet pacing Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 06/17] net/mlx5: create rearm " Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 07/17] net/mlx5: create Tx queues with DevX Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 08/17] net/mlx5: allocate packet pacing context Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 09/17] net/mlx5: introduce clock queue service routine Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 10/17] net/mlx5: prepare Tx queue structures to support timestamp Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 11/17] net/mlx5: convert timestamp to completion index Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 12/17] net/mlx5: prepare Tx datapath to support sheduling Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 13/17] net/mlx5: add scheduling support to send routine template Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 14/17] net/mlx5: add read device clock support Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 15/17] net/mlx5: provide the send scheduling error statistics Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 16/17] common/mlx5: add register access DevX routine Viacheslav Ovsiienko
2020-07-15  6:21   ` [dpdk-dev] [PATCH v2 17/17] net/mlx5: convert Rx timestamps in realtime format Viacheslav Ovsiienko
2020-07-16  8:23 ` [dpdk-dev] [PATCH v3 00/17] net/mlx5: introduce accurate packet Tx scheduling Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 01/17] common/mlx5: update common part to support packet pacing Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 02/17] net/mlx5: introduce send scheduling devargs Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 03/17] net/mlx5: fix UAR lock sharing for multiport devices Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 04/17] net/mlx5: introduce shared UAR resource Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 05/17] net/mlx5: create clock queue for packet pacing Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 06/17] net/mlx5: create rearm " Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 07/17] net/mlx5: create Tx queues with DevX Viacheslav Ovsiienko
2020-07-20 14:18     ` Ferruh Yigit
2020-07-20 15:25       ` Ferruh Yigit
2020-07-21 11:35         ` Slava Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 08/17] net/mlx5: allocate packet pacing context Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 09/17] net/mlx5: introduce clock queue service routine Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 10/17] net/mlx5: prepare Tx queue structures to support timestamp Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 11/17] net/mlx5: convert timestamp to completion index Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 12/17] net/mlx5: prepare Tx datapath to support sheduling Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 13/17] net/mlx5: add scheduling support to send routine template Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 14/17] net/mlx5: add read device clock support Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 15/17] net/mlx5: provide the send scheduling error statistics Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 16/17] common/mlx5: add register access DevX routine Viacheslav Ovsiienko
2020-07-16  8:23   ` [dpdk-dev] [PATCH v3 17/17] net/mlx5: convert Rx timestamps in realtime format Viacheslav Ovsiienko
2020-07-16 20:20   ` [dpdk-dev] [PATCH v3 00/17] net/mlx5: introduce accurate packet Tx scheduling Raslan Darawsheh
2020-07-17 14:28 ` [dpdk-dev] [PATCH 1/3] net/mlx5: fix compilation issue with missing DevX event Viacheslav Ovsiienko
2020-07-17 14:28   ` [dpdk-dev] [PATCH 2/3] net/mlx5: fix compilation issue with atomic128 exchange Viacheslav Ovsiienko
2020-07-17 15:08     ` Thomas Monjalon
2020-07-17 15:15       ` Slava Ovsiienko
2020-07-17 14:28   ` [dpdk-dev] [PATCH 3/3] common/mlx5: fix DevX register access opcode Viacheslav Ovsiienko
2020-07-17 15:05     ` Thomas Monjalon
2020-07-17 15:11       ` Slava Ovsiienko
2020-07-17 15:19         ` Thomas Monjalon
2020-07-17 15:23           ` Slava Ovsiienko
2020-07-17 15:59             ` Thomas Monjalon
2020-07-18 13:38   ` [dpdk-dev] [PATCH 1/3] net/mlx5: fix compilation issue with missing DevX event Raslan Darawsheh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1594384782-17799-2-git-send-email-viacheslavo@mellanox.com \
    --to=viacheslavo@mellanox.com \
    --cc=arybchenko@solarflare.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=matan@mellanox.com \
    --cc=olivier.matz@6wind.com \
    --cc=rasland@mellanox.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).