From: Arek Kusztal <arkadiuszx.kusztal@intel.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, fiona.trahe@intel.com,
Arek Kusztal <arkadiuszx.kusztal@intel.com>
Subject: [dpdk-dev] [PATCH v4 4/4] crypto/qat: add modular inverse to qat asym pmd
Date: Wed, 27 Mar 2019 12:17:20 +0100 [thread overview]
Message-ID: <20190327111720.13732-5-arkadiuszx.kusztal@intel.com> (raw)
Message-ID: <20190327111720.K7F9gf4vYz3ufwnk9SMdzRr6pLJrUsll2upKYfCKjQA@z> (raw)
In-Reply-To: <20190327111720.13732-1-arkadiuszx.kusztal@intel.com>
This commit adds modular multiplicative inverse to Intel
QuickAssist Technology driver. For capabilities or limitations
please refer to qat.rst or qat_asym_capabilities.h.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
---
doc/guides/cryptodevs/qat.rst | 1 +
.../qat/qat_adf/qat_pke_functionality_arrays.h | 4 +-
drivers/crypto/qat/qat_asym.c | 85 +++++++++++++++++++++-
drivers/crypto/qat/qat_asym.h | 3 +
drivers/crypto/qat/qat_asym_capabilities.h | 16 ++++
5 files changed, 106 insertions(+), 3 deletions(-)
diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index e09ae8b..3c2467d 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -107,6 +107,7 @@ Asymmetric Crypto Service on QAT
The QAT Asym PMD has support for:
* ``Modular exponentiation``
+* ``Modular multiplicative inverse``
Limitations
~~~~~~~~~~~
diff --git a/drivers/common/qat/qat_adf/qat_pke_functionality_arrays.h b/drivers/common/qat/qat_adf/qat_pke_functionality_arrays.h
index ffea27e..8adf209 100644
--- a/drivers/common/qat/qat_adf/qat_pke_functionality_arrays.h
+++ b/drivers/common/qat/qat_adf/qat_pke_functionality_arrays.h
@@ -21,7 +21,7 @@ static const uint32_t MOD_EXP_SIZE[][2] = {
{ 4096, MATHS_MODEXP_L4096 }
};
-static const uint32_t __rte_unused MOD_INV_IDS_ODD[][2] = {
+static const uint32_t MOD_INV_IDS_ODD[][2] = {
{ 128, MATHS_MODINV_ODD_L128 },
{ 192, MATHS_MODINV_ODD_L192 },
{ 256, MATHS_MODINV_ODD_L256 },
@@ -35,7 +35,7 @@ static const uint32_t __rte_unused MOD_INV_IDS_ODD[][2] = {
{ 4096, MATHS_MODINV_ODD_L4096 },
};
-static const uint32_t __rte_unused MOD_INV_IDS_EVEN[][2] = {
+static const uint32_t MOD_INV_IDS_EVEN[][2] = {
{ 128, MATHS_MODINV_EVEN_L128 },
{ 192, MATHS_MODINV_EVEN_L192 },
{ 256, MATHS_MODINV_EVEN_L256 },
diff --git a/drivers/crypto/qat/qat_asym.c b/drivers/crypto/qat/qat_asym.c
index 733aab4..dc4c959 100644
--- a/drivers/crypto/qat/qat_asym.c
+++ b/drivers/crypto/qat/qat_asym.c
@@ -54,6 +54,9 @@ static void qat_asym_build_req_tmpl(void *sess_private_data,
if (xform->xform_type == RTE_CRYPTO_ASYM_XFORM_MODEX) {
qat_req->output_param_count = 1;
qat_req->input_param_count = 3;
+ } else if (xform->xform_type == RTE_CRYPTO_ASYM_XFORM_MODINV) {
+ qat_req->output_param_count = 1;
+ qat_req->input_param_count = 2;
}
}
@@ -147,7 +150,8 @@ qat_asym_build_request(void *in_op,
if (ctx->alg == QAT_PKE_MODEXP) {
err = qat_asym_check_nonzero(ctx->sess_alg_params.mod_exp.n);
if (err) {
- QAT_LOG(ERR, "Empty modulus, aborting this operation");
+ QAT_LOG(ERR, "Empty modulus in modular exponentiation,"
+ " aborting this operation");
goto error;
}
@@ -189,6 +193,56 @@ qat_asym_build_request(void *in_op,
cookie->input_array[2],
alg_size_in_bytes);
#endif
+ } else if (ctx->alg == QAT_PKE_MODINV) {
+ err = qat_asym_check_nonzero(ctx->sess_alg_params.mod_inv.n);
+ if (err) {
+ QAT_LOG(ERR, "Empty modulus in modular multiplicative"
+ " inverse, aborting this operation");
+ goto error;
+ }
+
+ alg_size_in_bytes = max_of(2, asym_op->modinv.base.length,
+ ctx->sess_alg_params.mod_inv.n.length);
+ alg_size = alg_size_in_bytes << 3;
+
+ if (ctx->sess_alg_params.mod_inv.n.data[
+ ctx->sess_alg_params.mod_inv.n.length - 1] & 0x01) {
+ if (qat_asym_get_sz_and_func_id(MOD_INV_IDS_ODD,
+ sizeof(MOD_INV_IDS_ODD)/
+ sizeof(*MOD_INV_IDS_ODD),
+ &alg_size, &func_id)) {
+ err = QAT_ASYM_ERROR_INVALID_PARAM;
+ goto error;
+ }
+ } else {
+ if (qat_asym_get_sz_and_func_id(MOD_INV_IDS_EVEN,
+ sizeof(MOD_INV_IDS_EVEN)/
+ sizeof(*MOD_INV_IDS_EVEN),
+ &alg_size, &func_id)) {
+ err = QAT_ASYM_ERROR_INVALID_PARAM;
+ goto error;
+ }
+ }
+
+ alg_size_in_bytes = alg_size >> 3;
+ rte_memcpy(cookie->input_array[0] + alg_size_in_bytes -
+ asym_op->modinv.base.length
+ , asym_op->modinv.base.data,
+ asym_op->modinv.base.length);
+ rte_memcpy(cookie->input_array[1] + alg_size_in_bytes -
+ ctx->sess_alg_params.mod_inv.n.length
+ , ctx->sess_alg_params.mod_inv.n.data,
+ ctx->sess_alg_params.mod_inv.n.length);
+ cookie->alg_size = alg_size;
+ qat_req->pke_hdr.cd_pars.func_id = func_id;
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ QAT_DP_HEXDUMP_LOG(DEBUG, "base",
+ cookie->input_array[0],
+ alg_size_in_bytes);
+ QAT_DP_HEXDUMP_LOG(DEBUG, "modulus",
+ cookie->input_array[1],
+ alg_size_in_bytes);
+#endif
}
#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
@@ -261,6 +315,26 @@ qat_asym_process_response(void **op, uint8_t *resp,
}
qat_clear_arrays(cookie, 3, 1, alg_size_in_bytes,
alg_size_in_bytes);
+ } else if (ctx->alg == QAT_PKE_MODINV) {
+ alg_size = cookie->alg_size;
+ alg_size_in_bytes = alg_size >> 3;
+ uint8_t *modinv_result = asym_op->modinv.result.data;
+
+ if (rx_op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED) {
+ rte_memcpy(modinv_result + (asym_op->modinv.result.length
+ - ctx->sess_alg_params.mod_inv.n.length),
+ cookie->output_array[0] + alg_size_in_bytes
+ - ctx->sess_alg_params.mod_inv.n.length,
+ ctx->sess_alg_params.mod_inv.n.length);
+ rx_op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ QAT_DP_HEXDUMP_LOG(DEBUG, "modinv_result",
+ cookie->output_array[0],
+ alg_size_in_bytes);
+#endif
+ }
+ qat_clear_arrays(cookie, 2, 1, alg_size_in_bytes,
+ alg_size_in_bytes);
}
#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
@@ -297,6 +371,15 @@ qat_asym_session_configure(struct rte_cryptodev *dev,
err = -EINVAL;
goto error;
}
+ } else if (xform->xform_type == RTE_CRYPTO_ASYM_XFORM_MODINV) {
+ session->sess_alg_params.mod_inv.n = xform->modinv.modulus;
+ session->alg = QAT_PKE_MODINV;
+
+ if (xform->modinv.modulus.length == 0) {
+ QAT_LOG(ERR, "Invalid mod inv input parameter");
+ err = -EINVAL;
+ goto error;
+ }
} else {
QAT_LOG(ERR, "Invalid asymmetric crypto xform");
err = -EINVAL;
diff --git a/drivers/crypto/qat/qat_asym.h b/drivers/crypto/qat/qat_asym.h
index 228d2f7..ce4839b 100644
--- a/drivers/crypto/qat/qat_asym.h
+++ b/drivers/crypto/qat/qat_asym.h
@@ -50,6 +50,9 @@ struct qat_asym_session {
rte_crypto_param n;
rte_crypto_param e;
} mod_exp;
+ struct {
+ rte_crypto_param n;
+ } mod_inv;
} sess_alg_params;
};
diff --git a/drivers/crypto/qat/qat_asym_capabilities.h b/drivers/crypto/qat/qat_asym_capabilities.h
index 1d6323f..f43c025 100644
--- a/drivers/crypto/qat/qat_asym_capabilities.h
+++ b/drivers/crypto/qat/qat_asym_capabilities.h
@@ -21,6 +21,22 @@
} \
}, \
} \
+ }, \
+ { /* modinv */ \
+ .op = RTE_CRYPTO_OP_TYPE_ASYMMETRIC, \
+ {.asym = { \
+ .xform_capa = { \
+ .xform_type = RTE_CRYPTO_ASYM_XFORM_MODINV, \
+ .op_types = 0, \
+ { \
+ .modlen = { \
+ .min = 1, \
+ .max = 512, \
+ .increment = 1 \
+ }, } \
+ } \
+ }, \
+ } \
} \
#endif /* _QAT_ASYM_CAPABILITIES_H_ */
--
2.1.0
next prev parent reply other threads:[~2019-03-27 11:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-27 11:17 [dpdk-dev] [PATCH v4 0/4] Add PMD for asymmetric cryptography operations using Intel QuickAssist Technology devices Arek Kusztal
2019-03-27 11:17 ` Arek Kusztal
2019-03-27 11:17 ` [dpdk-dev] [PATCH v4 1/4] common/qat: add headers for asymmetric crypto Arek Kusztal
2019-03-27 11:17 ` Arek Kusztal
2019-03-27 11:17 ` [dpdk-dev] [PATCH v4 2/4] crypto/qat: add asymmetric cryptography PMD Arek Kusztal
2019-03-27 11:17 ` Arek Kusztal
2019-03-27 18:19 ` Trahe, Fiona
2019-03-27 18:19 ` Trahe, Fiona
2019-03-27 11:17 ` [dpdk-dev] [PATCH v4 3/4] crypto/qat: add modular exponentiation to qat asym pmd Arek Kusztal
2019-03-27 11:17 ` Arek Kusztal
2019-03-27 11:17 ` Arek Kusztal [this message]
2019-03-27 11:17 ` [dpdk-dev] [PATCH v4 4/4] crypto/qat: add modular inverse " Arek Kusztal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190327111720.13732-5-arkadiuszx.kusztal@intel.com \
--to=arkadiuszx.kusztal@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).