From: Igor Russkikh <Igor.Russkikh@aquantia.com>
To: "dev@dpdk.org" <dev@dpdk.org>
Cc: "ferruh.yigit@intel.com" <ferruh.yigit@intel.com>,
"thomas@monjalon.net" <thomas@monjalon.net>,
"arybchenko@solarflare.com" <arybchenko@solarflare.com>,
"konstantin.ananyev@intel.com" <konstantin.ananyev@intel.com>,
Igor Russkikh <Igor.Russkikh@aquantia.com>,
Pavel Belous <Pavel.Belous@aquantia.com>
Subject: [dpdk-dev] [PATCH v2 3/7] net/atlantic: macsec firmware interface
Date: Wed, 17 Apr 2019 15:45:33 +0000 [thread overview]
Message-ID: <b3c4cdf0c85d3503845a761eaf8112cfaf45a429.1555515863.git.igor.russkikh@aquantia.com> (raw)
Message-ID: <20190417154533.wKN_-pk6QRFzaHtTuSFsbDlId0k_TzOL0CFjGFcdF0c@z> (raw)
In-Reply-To: <cover.1555515863.git.igor.russkikh@aquantia.com>
From: Pavel Belous <pavel.belous@aquantia.com>
Implementation of firmware interface for macsec configuration.
Structure with config data is written into FW memory, then we trigger
FW to execute the request and wait for result.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
---
drivers/net/atlantic/atl_types.h | 2 +
.../net/atlantic/hw_atl/hw_atl_utils_fw2x.c | 51 +++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/drivers/net/atlantic/atl_types.h b/drivers/net/atlantic/atl_types.h
index 3cc9e96089e8..dbaf2c635f50 100644
--- a/drivers/net/atlantic/atl_types.h
+++ b/drivers/net/atlantic/atl_types.h
@@ -128,6 +128,8 @@ struct aq_hw_s {
struct hw_atl_stats_s last_stats;
struct aq_stats_s curr_stats;
+ u32 caps_lo;
+
u64 speed;
unsigned int chip_features;
u32 fw_ver_actual;
diff --git a/drivers/net/atlantic/hw_atl/hw_atl_utils_fw2x.c b/drivers/net/atlantic/hw_atl/hw_atl_utils_fw2x.c
index f215ceb70435..89a3759b89b4 100644
--- a/drivers/net/atlantic/hw_atl/hw_atl_utils_fw2x.c
+++ b/drivers/net/atlantic/hw_atl/hw_atl_utils_fw2x.c
@@ -62,6 +62,7 @@ static int aq_fw2x_set_state(struct aq_hw_s *self,
static int aq_fw2x_init(struct aq_hw_s *self)
{
int err = 0;
+ struct hw_aq_atl_utils_mbox mbox;
/* check 10 times by 1ms */
AQ_HW_WAIT_FOR(0U != (self->mbox_addr =
@@ -70,6 +71,12 @@ static int aq_fw2x_init(struct aq_hw_s *self)
AQ_HW_WAIT_FOR(0U != (self->rpc_addr =
aq_hw_read_reg(self, HW_ATL_FW2X_MPI_RPC_ADDR)),
1000U, 100U);
+
+ /* Read caps */
+ hw_atl_utils_mpi_read_stats(self, &mbox);
+
+ self->caps_lo = mbox.info.caps_lo;
+
return err;
}
@@ -623,6 +630,49 @@ static int aq_fw2x_set_eeprom(struct aq_hw_s *self, int dev_addr,
return 0;
}
+static int aq_fw2x_send_macsec_request(struct aq_hw_s *self,
+ struct macsec_msg_fw_request *req,
+ struct macsec_msg_fw_response *response)
+{
+ int err = 0;
+ u32 mpi_opts = 0;
+
+ if (!response || !response)
+ return 0;
+
+ if ((self->caps_lo & BIT(CAPS_LO_MACSEC)) == 0)
+ return -EOPNOTSUPP;
+
+ /* Write macsec request to cfg memory */
+ err = hw_atl_utils_fw_upload_dwords(self, self->rpc_addr,
+ (u32 *)(void *)req,
+ RTE_ALIGN(sizeof(*req) / sizeof(u32), sizeof(u32)));
+
+ if (err < 0)
+ return err;
+
+ /* Toggle 0x368.CAPS_LO_MACSEC bit */
+ mpi_opts = aq_hw_read_reg(self, HW_ATL_FW2X_MPI_CONTROL_ADDR);
+ mpi_opts ^= BIT(CAPS_LO_MACSEC);
+
+ aq_hw_write_reg(self, HW_ATL_FW2X_MPI_CONTROL_ADDR, mpi_opts);
+
+ /* Wait until REQUEST_BIT matched in 0x370 */
+ AQ_HW_WAIT_FOR((aq_hw_read_reg(self, HW_ATL_FW2X_MPI_STATE_ADDR) &
+ BIT(CAPS_LO_MACSEC)) == (mpi_opts & BIT(CAPS_LO_MACSEC)),
+ 1000U, 10000U);
+
+ if (err < 0)
+ return err;
+
+ /* Read status of write operation */
+ err = hw_atl_utils_fw_downld_dwords(self, self->rpc_addr + sizeof(u32),
+ (u32 *)(void *)response,
+ RTE_ALIGN(sizeof(*response) / sizeof(u32), sizeof(u32)));
+
+ return err;
+}
+
const struct aq_fw_ops aq_fw_2x_ops = {
.init = aq_fw2x_init,
.deinit = aq_fw2x_deinit,
@@ -641,4 +691,5 @@ const struct aq_fw_ops aq_fw_2x_ops = {
.led_control = aq_fw2x_led_control,
.get_eeprom = aq_fw2x_get_eeprom,
.set_eeprom = aq_fw2x_set_eeprom,
+ .send_macsec_req = aq_fw2x_send_macsec_request,
};
--
2.17.1
next prev parent reply other threads:[~2019-04-17 15:45 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-17 15:45 [dpdk-dev] [PATCH v2 0/7] add MACSEC hw offload to atlantic PMD Igor Russkikh
2019-04-17 15:45 ` Igor Russkikh
2019-04-17 15:45 ` [dpdk-dev] [PATCH v2 1/7] net/atlantic: macsec hardware structures declaration Igor Russkikh
2019-04-17 15:45 ` Igor Russkikh
2019-04-17 15:45 ` [dpdk-dev] [PATCH v2 2/7] net/atlantic: enable macsec configuration Igor Russkikh
2019-04-17 15:45 ` Igor Russkikh
2019-04-17 17:14 ` Ferruh Yigit
2019-04-17 17:14 ` Ferruh Yigit
2019-04-17 15:45 ` Igor Russkikh [this message]
2019-04-17 15:45 ` [dpdk-dev] [PATCH v2 3/7] net/atlantic: macsec firmware interface Igor Russkikh
2019-04-17 15:45 ` [dpdk-dev] [PATCH v2 4/7] net/atlantic: interrupt handling of macsec events Igor Russkikh
2019-04-17 15:45 ` Igor Russkikh
2019-04-17 15:45 ` [dpdk-dev] [PATCH v2 5/7] net/atlantic: implement macsec statistics Igor Russkikh
2019-04-17 15:45 ` Igor Russkikh
2019-04-17 15:45 ` [dpdk-dev] [PATCH v2 6/7] net/atlantic: bump internal driver version Igor Russkikh
2019-04-17 15:45 ` Igor Russkikh
2019-04-17 15:45 ` [dpdk-dev] [PATCH v2 7/7] net/atlantic: public experimental macsec API Igor Russkikh
2019-04-17 15:45 ` Igor Russkikh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b3c4cdf0c85d3503845a761eaf8112cfaf45a429.1555515863.git.igor.russkikh@aquantia.com \
--to=igor.russkikh@aquantia.com \
--cc=Pavel.Belous@aquantia.com \
--cc=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).