From: Marcin Smoczynski <marcinx.smoczynski@intel.com>
To: akhil.goyal@nxp.com, konstantin.ananyev@intel.com,
roy.fan.zhang@intel.com, declan.doherty@intel.com,
radu.nicolau@intel.com, pablo.de.lara.guarch@intel.com
Cc: dev@dpdk.org, Marcin Smoczynski <marcinx.smoczynski@intel.com>
Subject: [dpdk-dev] [PATCH v4 7/8] examples/ipsec-secgw: cpu crypto testing
Date: Tue, 28 Jan 2020 04:16:41 +0100
Message-ID: <20200128031642.15256-8-marcinx.smoczynski@intel.com> (raw)
In-Reply-To: <20200128031642.15256-1-marcinx.smoczynski@intel.com>
Enable cpu-crypto mode testing by adding dedicated environmental
variable CRYPTO_PRIM_TYPE. Setting it to 'type cpu-crypto' allows
to run test scenario with cpu crypto acceleration.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
---
examples/ipsec-secgw/test/common_defs.sh | 21 +++++++++++++++++++
examples/ipsec-secgw/test/linux_test4.sh | 11 +---------
examples/ipsec-secgw/test/linux_test6.sh | 11 +---------
.../test/trs_3descbc_sha1_common_defs.sh | 8 +++----
.../test/trs_aescbc_sha1_common_defs.sh | 8 +++----
.../test/trs_aesctr_sha1_common_defs.sh | 8 +++----
.../test/tun_3descbc_sha1_common_defs.sh | 8 +++----
.../test/tun_aescbc_sha1_common_defs.sh | 8 +++----
.../test/tun_aesctr_sha1_common_defs.sh | 8 +++----
9 files changed, 47 insertions(+), 44 deletions(-)
diff --git a/examples/ipsec-secgw/test/common_defs.sh b/examples/ipsec-secgw/test/common_defs.sh
index 4aac4981a..6b6ae06f3 100644
--- a/examples/ipsec-secgw/test/common_defs.sh
+++ b/examples/ipsec-secgw/test/common_defs.sh
@@ -42,6 +42,27 @@ DPDK_BUILD=${RTE_TARGET:-x86_64-native-linux-gcc}
DEF_MTU_LEN=1400
DEF_PING_LEN=1200
+#upsate operation mode based on env vars values
+select_mode()
+{
+ # select sync/async mode
+ if [[ -n "${CRYPTO_PRIM_TYPE}" && -n "${SGW_CMD_XPRM}" ]]; then
+ echo "${CRYPTO_PRIM_TYPE} is enabled"
+ SGW_CFG_XPRM="${SGW_CFG_XPRM} ${CRYPTO_PRIM_TYPE}"
+ fi
+
+ #make linux to generate fragmented packets
+ if [[ -n "${MULTI_SEG_TEST}" && -n "${SGW_CMD_XPRM}" ]]; then
+ echo "multi-segment test is enabled"
+ SGW_CMD_XPRM="${SGW_CMD_XPRM} ${MULTI_SEG_TEST}"
+ PING_LEN=5000
+ MTU_LEN=1500
+ else
+ PING_LEN=${DEF_PING_LEN}
+ MTU_LEN=${DEF_MTU_LEN}
+ fi
+}
+
#setup mtu on local iface
set_local_mtu()
{
diff --git a/examples/ipsec-secgw/test/linux_test4.sh b/examples/ipsec-secgw/test/linux_test4.sh
index 760451000..fb8ae1023 100644
--- a/examples/ipsec-secgw/test/linux_test4.sh
+++ b/examples/ipsec-secgw/test/linux_test4.sh
@@ -45,16 +45,7 @@ MODE=$1
. ${DIR}/common_defs.sh
. ${DIR}/${MODE}_defs.sh
-#make linux to generate fragmented packets
-if [[ -n "${MULTI_SEG_TEST}" && -n "${SGW_CMD_XPRM}" ]]; then
- echo "multi-segment test is enabled"
- SGW_CMD_XPRM="${SGW_CMD_XPRM} ${MULTI_SEG_TEST}"
- PING_LEN=5000
- MTU_LEN=1500
-else
- PING_LEN=${DEF_PING_LEN}
- MTU_LEN=${DEF_MTU_LEN}
-fi
+select_mode
config_secgw
diff --git a/examples/ipsec-secgw/test/linux_test6.sh b/examples/ipsec-secgw/test/linux_test6.sh
index 479f29be3..dbcca7936 100644
--- a/examples/ipsec-secgw/test/linux_test6.sh
+++ b/examples/ipsec-secgw/test/linux_test6.sh
@@ -46,16 +46,7 @@ MODE=$1
. ${DIR}/common_defs.sh
. ${DIR}/${MODE}_defs.sh
-#make linux to generate fragmented packets
-if [[ -n "${MULTI_SEG_TEST}" && -n "${SGW_CMD_XPRM}" ]]; then
- echo "multi-segment test is enabled"
- SGW_CMD_XPRM="${SGW_CMD_XPRM} ${MULTI_SEG_TEST}"
- PING_LEN=5000
- MTU_LEN=1500
-else
- PING_LEN=${DEF_PING_LEN}
- MTU_LEN=${DEF_MTU_LEN}
-fi
+select_mode
config_secgw
diff --git a/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh
index 3c5c18afd..62118bb3f 100644
--- a/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh
@@ -33,14 +33,14 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
sa in 9 cipher_algo 3des-cbc \
cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo 3des-cbc \
@@ -48,7 +48,7 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 9 cipher_algo 3des-cbc \
@@ -56,7 +56,7 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
index 9dbdd1765..7ddeb2b5a 100644
--- a/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
@@ -32,27 +32,27 @@ sa in 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh b/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh
index 6aba680f9..f0178355a 100644
--- a/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh
@@ -32,27 +32,27 @@ sa in 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh
index 7c3226f84..d8869fad0 100644
--- a/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh
@@ -33,14 +33,14 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4}
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
sa in 9 cipher_algo 3des-cbc \
cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6}
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo 3des-cbc \
@@ -48,14 +48,14 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4}
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4} ${SGW_CFG_XPRM}
sa out 9 cipher_algo 3des-cbc \
cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6}
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6} ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
index bdf5938a0..2616926b2 100644
--- a/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
@@ -32,26 +32,26 @@ sa in 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4}
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6}
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4}
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4} ${SGW_CFG_XPRM}
sa out 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6}
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6} ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh b/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh
index 06f2ef0c6..06b561fd7 100644
--- a/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh
@@ -32,26 +32,26 @@ sa in 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4}
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6}
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4}
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4} ${SGW_CFG_XPRM}
sa out 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6}
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6} ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
--
2.17.1
next prev parent reply other threads:[~2020-01-28 3:20 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 18:28 [dpdk-dev] [PATCH v3 0/6] Introduce CPU crypto mode Marcin Smoczynski
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 1/6] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-01-15 23:20 ` Ananyev, Konstantin
2020-01-16 10:11 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 2/6] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-01-15 23:16 ` Ananyev, Konstantin
2020-01-16 10:00 ` Zhang, Roy Fan
2020-01-21 13:53 ` De Lara Guarch, Pablo
2020-01-21 14:29 ` Ananyev, Konstantin
2020-01-21 14:51 ` De Lara Guarch, Pablo
2020-01-21 15:23 ` Ananyev, Konstantin
2020-01-21 22:33 ` De Lara Guarch, Pablo
2020-01-22 12:43 ` Ananyev, Konstantin
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 3/6] security: add cpu crypto action type Marcin Smoczynski
2020-01-15 22:49 ` Ananyev, Konstantin
2020-01-16 10:01 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 4/6] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-01-16 10:53 ` Zhang, Roy Fan
2020-01-16 10:53 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 5/6] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-01-16 10:54 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 6/6] examples/ipsec-secgw: cpu crypto testing Marcin Smoczynski
2020-01-16 10:54 ` Zhang, Roy Fan
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 0/8] Introduce CPU crypto mode Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 1/8] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 2/8] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-01-28 10:49 ` De Lara Guarch, Pablo
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 3/8] test/crypto: add CPU crypto tests Marcin Smoczynski
2020-01-28 9:31 ` De Lara Guarch, Pablo
2020-01-28 10:51 ` De Lara Guarch, Pablo
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 4/8] security: add cpu crypto action type Marcin Smoczynski
2020-01-28 11:00 ` Ananyev, Konstantin
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 5/8] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 6/8] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-01-28 3:16 ` Marcin Smoczynski [this message]
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 8/8] doc: add cpu crypto related documentation Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 0/8] Introduce CPU crypto mode Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 1/8] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-01-31 14:30 ` Akhil Goyal
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 2/8] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-01-28 16:39 ` Ananyev, Konstantin
2020-01-31 14:33 ` Akhil Goyal
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 3/8] test/crypto: add CPU crypto tests Marcin Smoczynski
2020-01-31 14:37 ` Akhil Goyal
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 4/8] security: add cpu crypto action type Marcin Smoczynski
2020-01-31 14:26 ` Akhil Goyal
2020-02-04 10:36 ` Akhil Goyal
2020-02-04 10:43 ` Ananyev, Konstantin
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 5/8] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-01-28 16:37 ` Ananyev, Konstantin
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 6/8] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 7/8] examples/ipsec-secgw: cpu crypto testing Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 8/8] doc: add cpu crypto related documentation Marcin Smoczynski
2020-01-31 14:43 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 0/8] Introduce CPU crypto mode Marcin Smoczynski
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 1/8] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-02-05 14:57 ` Akhil Goyal
2020-02-06 0:48 ` Thomas Monjalon
2020-02-06 12:36 ` [dpdk-dev] [PATCH] cryptodev: fix missing doxygen comment Marcin Smoczynski
2020-02-06 12:43 ` Ananyev, Konstantin
2020-02-12 13:15 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 2/8] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 3/8] security: add cpu crypto action type Marcin Smoczynski
2020-02-05 14:58 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 4/8] test/crypto: add cpu crypto mode to tests Marcin Smoczynski
2020-02-05 14:59 ` Akhil Goyal
2020-02-07 14:28 ` [dpdk-dev] [PATCH] test/crypto: add cpu crypto mode tests Marcin Smoczynski
2020-02-07 17:04 ` Ananyev, Konstantin
2020-02-13 9:14 ` Akhil Goyal
2020-02-13 9:29 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 5/8] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-02-05 14:59 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 6/8] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-02-05 15:00 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 7/8] examples/ipsec-secgw: cpu crypto testing Marcin Smoczynski
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 8/8] doc: add release notes for cpu crypto Marcin Smoczynski
2020-02-05 15:03 ` [dpdk-dev] [PATCH v6 0/8] Introduce CPU crypto mode Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200128031642.15256-8-marcinx.smoczynski@intel.com \
--to=marcinx.smoczynski@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=pablo.de.lara.guarch@intel.com \
--cc=radu.nicolau@intel.com \
--cc=roy.fan.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
DPDK patches and discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
dev@dpdk.org
public-inbox-index dev
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://inbox.dpdk.org/inbox.dpdk.dev
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git