From: Vikas Gupta <vikas.gupta@broadcom.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Cc: ajit.khaparde@broadcom.com, vikram.prakash@broadcom.com,
Vikas Gupta <vikas.gupta@broadcom.com>,
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Subject: [dpdk-dev] [PATCH v1 7/8] crypto/bcmfs: add crypto h/w module
Date: Wed, 12 Aug 2020 12:01:26 +0530 [thread overview]
Message-ID: <20200812063127.8687-8-vikas.gupta@broadcom.com> (raw)
In-Reply-To: <20200812063127.8687-1-vikas.gupta@broadcom.com>
Add crypto h/w module to process crypto op. Crypto op is processed via
sym_engine module before submitting the crypto request to h/w queues.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/crypto/bcmfs/bcmfs_sym.c | 316 ++++++++
drivers/crypto/bcmfs/bcmfs_sym_defs.h | 16 +
drivers/crypto/bcmfs/bcmfs_sym_engine.c | 994 ++++++++++++++++++++++++
drivers/crypto/bcmfs/bcmfs_sym_engine.h | 103 +++
drivers/crypto/bcmfs/bcmfs_sym_pmd.c | 26 +
drivers/crypto/bcmfs/bcmfs_sym_req.h | 40 +
drivers/crypto/bcmfs/meson.build | 4 +-
7 files changed, 1498 insertions(+), 1 deletion(-)
create mode 100644 drivers/crypto/bcmfs/bcmfs_sym.c
create mode 100644 drivers/crypto/bcmfs/bcmfs_sym_engine.c
create mode 100644 drivers/crypto/bcmfs/bcmfs_sym_engine.h
diff --git a/drivers/crypto/bcmfs/bcmfs_sym.c b/drivers/crypto/bcmfs/bcmfs_sym.c
new file mode 100644
index 000000000..8f9415b5e
--- /dev/null
+++ b/drivers/crypto/bcmfs/bcmfs_sym.c
@@ -0,0 +1,316 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Broadcom
+ * All rights reserved.
+ */
+
+#include <stdbool.h>
+
+#include <rte_byteorder.h>
+#include <rte_crypto_sym.h>
+#include <rte_cryptodev.h>
+#include <rte_mbuf.h>
+#include <rte_mempool.h>
+
+#include "bcmfs_sym_defs.h"
+#include "bcmfs_sym_engine.h"
+#include "bcmfs_sym_req.h"
+#include "bcmfs_sym_session.h"
+
+/** Process cipher operation */
+static int
+process_crypto_cipher_op(struct rte_crypto_op *op,
+ struct rte_mbuf *mbuf_src,
+ struct rte_mbuf *mbuf_dst,
+ struct bcmfs_sym_session *sess,
+ struct bcmfs_sym_request *req)
+{
+ int rc = 0;
+ struct fsattr src, dst, iv, key;
+ struct rte_crypto_sym_op *sym_op = op->sym;
+
+ fsattr_sz(&src) = sym_op->cipher.data.length;
+ fsattr_sz(&dst) = sym_op->cipher.data.length;
+
+ fsattr_va(&src) = rte_pktmbuf_mtod_offset
+ (mbuf_src,
+ uint8_t *,
+ op->sym->cipher.data.offset);
+
+ fsattr_va(&dst) = rte_pktmbuf_mtod_offset
+ (mbuf_dst,
+ uint8_t *,
+ op->sym->cipher.data.offset);
+
+ fsattr_pa(&src) = rte_pktmbuf_iova(mbuf_src);
+ fsattr_pa(&dst) = rte_pktmbuf_iova(mbuf_dst);
+
+ fsattr_va(&iv) = rte_crypto_op_ctod_offset(op,
+ uint8_t *,
+ sess->cipher.iv.offset);
+
+ fsattr_sz(&iv) = sess->cipher.iv.length;
+
+ fsattr_va(&key) = sess->cipher.key.data;
+ fsattr_pa(&key) = 0;
+ fsattr_sz(&key) = sess->cipher.key.length;
+
+ rc = bcmfs_crypto_build_cipher_req(req, sess->cipher.algo,
+ sess->cipher.direction, &src,
+ &dst, &key, &iv);
+ if (rc)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+
+ return rc;
+}
+
+/** Process auth operation */
+static int
+process_crypto_auth_op(struct rte_crypto_op *op,
+ struct rte_mbuf *mbuf_src,
+ struct bcmfs_sym_session *sess,
+ struct bcmfs_sym_request *req)
+{
+ int rc = 0;
+ struct fsattr src, dst, mac, key;
+
+ fsattr_sz(&src) = op->sym->auth.data.length;
+ fsattr_va(&src) = rte_pktmbuf_mtod_offset(mbuf_src,
+ uint8_t *,
+ op->sym->auth.data.offset);
+ fsattr_pa(&src) = rte_pktmbuf_iova(mbuf_src);
+
+ if (!sess->auth.operation) {
+ fsattr_va(&mac) = op->sym->auth.digest.data;
+ fsattr_pa(&mac) = op->sym->auth.digest.phys_addr;
+ fsattr_sz(&mac) = sess->auth.digest_length;
+ } else {
+ fsattr_va(&dst) = op->sym->auth.digest.data;
+ fsattr_pa(&dst) = op->sym->auth.digest.phys_addr;
+ fsattr_sz(&dst) = sess->auth.digest_length;
+ }
+
+ fsattr_va(&key) = sess->auth.key.data;
+ fsattr_pa(&key) = 0;
+ fsattr_sz(&key) = sess->auth.key.length;
+
+ /* AES-GMAC uses AES-GCM-128 authenticator */
+ if (sess->auth.algo == BCMFS_CRYPTO_AUTH_AES_GMAC) {
+ struct fsattr iv;
+ fsattr_va(&iv) = rte_crypto_op_ctod_offset(op,
+ uint8_t *,
+ sess->auth.iv.offset);
+ fsattr_pa(&iv) = 0;
+ fsattr_sz(&iv) = sess->auth.iv.length;
+
+ rc = bcmfs_crypto_build_aead_request(req,
+ BCMFS_CRYPTO_CIPHER_NONE,
+ 0,
+ BCMFS_CRYPTO_AUTH_AES_GMAC,
+ sess->auth.operation,
+ &src, NULL, NULL, &key,
+ &iv, NULL,
+ sess->auth.operation ?
+ (&dst) : &(mac),
+ 0);
+ } else {
+ rc = bcmfs_crypto_build_auth_req(req, sess->auth.algo,
+ sess->auth.operation,
+ &src,
+ (sess->auth.operation) ? (&dst) : NULL,
+ (sess->auth.operation) ? NULL : (&mac),
+ &key);
+ }
+
+ if (rc)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+
+ return rc;
+}
+
+/** Process combined/chained mode operation */
+static int
+process_crypto_combined_op(struct rte_crypto_op *op,
+ struct rte_mbuf *mbuf_src,
+ struct rte_mbuf *mbuf_dst,
+ struct bcmfs_sym_session *sess,
+ struct bcmfs_sym_request *req)
+{
+ int rc = 0, aad_size = 0;
+ struct fsattr src, dst, iv;
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct fsattr cipher_key, aad, mac, auth_key;
+
+ fsattr_sz(&src) = sym_op->cipher.data.length;
+ fsattr_sz(&dst) = sym_op->cipher.data.length;
+
+ fsattr_va(&src) = rte_pktmbuf_mtod_offset
+ (mbuf_src,
+ uint8_t *,
+ sym_op->cipher.data.offset);
+
+ fsattr_va(&dst) = rte_pktmbuf_mtod_offset
+ (mbuf_dst,
+ uint8_t *,
+ sym_op->cipher.data.offset);
+
+ fsattr_pa(&src) = rte_pktmbuf_iova_offset(mbuf_src,
+ sym_op->cipher.data.offset);
+ fsattr_pa(&dst) = rte_pktmbuf_iova_offset(mbuf_dst,
+ sym_op->cipher.data.offset);
+
+ fsattr_va(&iv) = rte_crypto_op_ctod_offset(op,
+ uint8_t *,
+ sess->cipher.iv.offset);
+
+ fsattr_pa(&iv) = 0;
+ fsattr_sz(&iv) = sess->cipher.iv.length;
+
+ fsattr_va(&cipher_key) = sess->cipher.key.data;
+ fsattr_pa(&cipher_key) = 0;
+ fsattr_sz(&cipher_key) = sess->cipher.key.length;
+
+ fsattr_va(&auth_key) = sess->auth.key.data;
+ fsattr_pa(&auth_key) = 0;
+ fsattr_sz(&auth_key) = sess->auth.key.length;
+
+ fsattr_va(&mac) = op->sym->auth.digest.data;
+ fsattr_pa(&mac) = op->sym->auth.digest.phys_addr;
+ fsattr_sz(&mac) = sess->auth.digest_length;
+
+ aad_size = sym_op->auth.data.length - sym_op->cipher.data.length;
+
+ if (aad_size > 0) {
+ fsattr_sz(&aad) = aad_size;
+ fsattr_va(&aad) = rte_pktmbuf_mtod_offset
+ (mbuf_src,
+ uint8_t *,
+ sym_op->auth.data.offset);
+ fsattr_pa(&aad) = rte_pktmbuf_iova_offset(mbuf_src,
+ sym_op->auth.data.offset);
+ }
+
+ rc = bcmfs_crypto_build_aead_request(req, sess->cipher.algo,
+ sess->cipher.direction,
+ sess->auth.algo,
+ sess->auth.operation,
+ &src, &dst, &cipher_key,
+ &auth_key, &iv,
+ (aad_size > 0) ? (&aad) : NULL,
+ &mac, sess->cipher_first);
+
+ if (rc)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+
+ return rc;
+}
+
+/** Process AEAD operation */
+static int
+process_crypto_aead_op(struct rte_crypto_op *op,
+ struct rte_mbuf *mbuf_src,
+ struct rte_mbuf *mbuf_dst,
+ struct bcmfs_sym_session *sess,
+ struct bcmfs_sym_request *req)
+{
+ int rc = 0;
+ struct fsattr src, dst, iv;
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct fsattr cipher_key, aad, mac, auth_key;
+ enum bcmfs_crypto_cipher_op cipher_op;
+ enum bcmfs_crypto_auth_op auth_op;
+
+ if (sess->cipher.direction) {
+ auth_op = BCMFS_CRYPTO_AUTH_OP_VERIFY;
+ cipher_op = BCMFS_CRYPTO_CIPHER_OP_DECRYPT;
+ } else {
+ auth_op = BCMFS_CRYPTO_AUTH_OP_GENERATE;
+ cipher_op = BCMFS_CRYPTO_CIPHER_OP_ENCRYPT;
+ }
+
+ fsattr_sz(&src) = sym_op->aead.data.length;
+ fsattr_sz(&dst) = sym_op->aead.data.length;
+
+ fsattr_va(&src) = rte_pktmbuf_mtod_offset
+ (mbuf_src,
+ uint8_t *,
+ sym_op->aead.data.offset);
+
+ fsattr_va(&dst) = rte_pktmbuf_mtod_offset
+ (mbuf_dst,
+ uint8_t *,
+ sym_op->aead.data.offset);
+
+ fsattr_pa(&src) = rte_pktmbuf_iova_offset(mbuf_src,
+ sym_op->aead.data.offset);
+ fsattr_pa(&dst) = rte_pktmbuf_iova_offset(mbuf_dst,
+ sym_op->aead.data.offset);
+
+ fsattr_va(&iv) = rte_crypto_op_ctod_offset(op,
+ uint8_t *,
+ sess->cipher.iv.offset);
+
+ fsattr_pa(&iv) = 0;
+ fsattr_sz(&iv) = sess->cipher.iv.length;
+
+ fsattr_va(&cipher_key) = sess->cipher.key.data;
+ fsattr_pa(&cipher_key) = 0;
+ fsattr_sz(&cipher_key) = sess->cipher.key.length;
+
+ fsattr_va(&auth_key) = sess->auth.key.data;
+ fsattr_pa(&auth_key) = 0;
+ fsattr_sz(&auth_key) = sess->auth.key.length;
+
+ fsattr_va(&mac) = op->sym->aead.digest.data;
+ fsattr_pa(&mac) = op->sym->aead.digest.phys_addr;
+ fsattr_sz(&mac) = sess->auth.digest_length;
+
+ fsattr_va(&aad) = op->sym->aead.aad.data;
+ fsattr_pa(&aad) = op->sym->aead.aad.phys_addr;
+ fsattr_sz(&aad) = sess->aead.aad_length;
+
+ rc = bcmfs_crypto_build_aead_request(req, sess->cipher.algo,
+ cipher_op, sess->auth.algo,
+ auth_op, &src, &dst, &cipher_key,
+ &auth_key, &iv, &aad, &mac,
+ sess->cipher.direction ? 0 : 1);
+
+ if (rc)
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+
+ return rc;
+}
+
+/** Process crypto operation for mbuf */
+int
+bcmfs_process_sym_crypto_op(struct rte_crypto_op *op,
+ struct bcmfs_sym_session *sess,
+ struct bcmfs_sym_request *req)
+{
+ struct rte_mbuf *msrc, *mdst;
+ int rc = 0;
+
+ msrc = op->sym->m_src;
+ mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
+ op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
+
+ switch (sess->chain_order) {
+ case BCMFS_SYM_CHAIN_ONLY_CIPHER:
+ rc = process_crypto_cipher_op(op, msrc, mdst, sess, req);
+ break;
+ case BCMFS_SYM_CHAIN_ONLY_AUTH:
+ rc = process_crypto_auth_op(op, msrc, sess, req);
+ break;
+ case BCMFS_SYM_CHAIN_CIPHER_AUTH:
+ case BCMFS_SYM_CHAIN_AUTH_CIPHER:
+ rc = process_crypto_combined_op(op, msrc, mdst, sess, req);
+ break;
+ case BCMFS_SYM_CHAIN_AEAD:
+ rc = process_crypto_aead_op(op, msrc, mdst, sess, req);
+ break;
+ default:
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ break;
+ }
+
+ return rc;
+}
diff --git a/drivers/crypto/bcmfs/bcmfs_sym_defs.h b/drivers/crypto/bcmfs/bcmfs_sym_defs.h
index b5657a9bc..8824521dd 100644
--- a/drivers/crypto/bcmfs/bcmfs_sym_defs.h
+++ b/drivers/crypto/bcmfs/bcmfs_sym_defs.h
@@ -15,6 +15,18 @@
#define BCMFS_MAX_IV_SIZE 16
#define BCMFS_MAX_DIGEST_SIZE 64
+struct bcmfs_sym_session;
+struct bcmfs_sym_request;
+
+/** Crypto Request processing successful. */
+#define BCMFS_SYM_RESPONSE_SUCCESS (0)
+/** Crypot Request processing protocol failure. */
+#define BCMFS_SYM_RESPONSE_PROTO_FAILURE (1)
+/** Crypot Request processing completion failure. */
+#define BCMFS_SYM_RESPONSE_COMPL_ERROR (2)
+/** Crypot Request processing hash tag check error. */
+#define BCMFS_SYM_RESPONSE_HASH_TAG_ERROR (3)
+
/** Symmetric Cipher Direction */
enum bcmfs_crypto_cipher_op {
/** Encrypt cipher operation */
@@ -167,4 +179,8 @@ enum bcmfs_sym_crypto_class {
BCMFS_CRYPTO_AEAD,
};
+int
+bcmfs_process_sym_crypto_op(struct rte_crypto_op *op,
+ struct bcmfs_sym_session *sess,
+ struct bcmfs_sym_request *req);
#endif /* _BCMFS_SYM_DEFS_H_ */
diff --git a/drivers/crypto/bcmfs/bcmfs_sym_engine.c b/drivers/crypto/bcmfs/bcmfs_sym_engine.c
new file mode 100644
index 000000000..b8cf3eab9
--- /dev/null
+++ b/drivers/crypto/bcmfs/bcmfs_sym_engine.c
@@ -0,0 +1,994 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2020 Broadcom.
+ * All rights reserved.
+ */
+
+#include <stdbool.h>
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_cryptodev.h>
+
+#include "bcmfs_logs.h"
+#include "bcmfs_sym_defs.h"
+#include "bcmfs_dev_msg.h"
+#include "bcmfs_sym_req.h"
+#include "bcmfs_sym_engine.h"
+
+enum spu2_cipher_type {
+ SPU2_CIPHER_TYPE_NONE = 0x0,
+ SPU2_CIPHER_TYPE_AES128 = 0x1,
+ SPU2_CIPHER_TYPE_AES192 = 0x2,
+ SPU2_CIPHER_TYPE_AES256 = 0x3,
+ SPU2_CIPHER_TYPE_DES = 0x4,
+ SPU2_CIPHER_TYPE_3DES = 0x5,
+ SPU2_CIPHER_TYPE_LAST
+};
+
+enum spu2_cipher_mode {
+ SPU2_CIPHER_MODE_ECB = 0x0,
+ SPU2_CIPHER_MODE_CBC = 0x1,
+ SPU2_CIPHER_MODE_CTR = 0x2,
+ SPU2_CIPHER_MODE_CFB = 0x3,
+ SPU2_CIPHER_MODE_OFB = 0x4,
+ SPU2_CIPHER_MODE_XTS = 0x5,
+ SPU2_CIPHER_MODE_CCM = 0x6,
+ SPU2_CIPHER_MODE_GCM = 0x7,
+ SPU2_CIPHER_MODE_LAST
+};
+
+enum spu2_hash_type {
+ SPU2_HASH_TYPE_NONE = 0x0,
+ SPU2_HASH_TYPE_AES128 = 0x1,
+ SPU2_HASH_TYPE_AES192 = 0x2,
+ SPU2_HASH_TYPE_AES256 = 0x3,
+ SPU2_HASH_TYPE_MD5 = 0x6,
+ SPU2_HASH_TYPE_SHA1 = 0x7,
+ SPU2_HASH_TYPE_SHA224 = 0x8,
+ SPU2_HASH_TYPE_SHA256 = 0x9,
+ SPU2_HASH_TYPE_SHA384 = 0xa,
+ SPU2_HASH_TYPE_SHA512 = 0xb,
+ SPU2_HASH_TYPE_SHA512_224 = 0xc,
+ SPU2_HASH_TYPE_SHA512_256 = 0xd,
+ SPU2_HASH_TYPE_SHA3_224 = 0xe,
+ SPU2_HASH_TYPE_SHA3_256 = 0xf,
+ SPU2_HASH_TYPE_SHA3_384 = 0x10,
+ SPU2_HASH_TYPE_SHA3_512 = 0x11,
+ SPU2_HASH_TYPE_LAST
+};
+
+enum spu2_hash_mode {
+ SPU2_HASH_MODE_CMAC = 0x0,
+ SPU2_HASH_MODE_CBC_MAC = 0x1,
+ SPU2_HASH_MODE_XCBC_MAC = 0x2,
+ SPU2_HASH_MODE_HMAC = 0x3,
+ SPU2_HASH_MODE_RABIN = 0x4,
+ SPU2_HASH_MODE_CCM = 0x5,
+ SPU2_HASH_MODE_GCM = 0x6,
+ SPU2_HASH_MODE_RESERVED = 0x7,
+ SPU2_HASH_MODE_LAST
+};
+
+enum spu2_proto_sel {
+ SPU2_PROTO_RESV = 0,
+ SPU2_MACSEC_SECTAG8_ECB = 1,
+ SPU2_MACSEC_SECTAG8_SCB = 2,
+ SPU2_MACSEC_SECTAG16 = 3,
+ SPU2_MACSEC_SECTAG16_8_XPN = 4,
+ SPU2_IPSEC = 5,
+ SPU2_IPSEC_ESN = 6,
+ SPU2_TLS_CIPHER = 7,
+ SPU2_TLS_AEAD = 8,
+ SPU2_DTLS_CIPHER = 9,
+ SPU2_DTLS_AEAD = 10
+};
+
+/* SPU2 response size */
+#define SPU2_STATUS_LEN 2
+
+/* Metadata settings in response */
+enum spu2_ret_md_opts {
+ SPU2_RET_NO_MD = 0, /* return no metadata */
+ SPU2_RET_FMD_OMD = 1, /* return both FMD and OMD */
+ SPU2_RET_FMD_ONLY = 2, /* return only FMD */
+ SPU2_RET_FMD_OMD_IV = 3, /* return FMD and OMD with just IVs */
+};
+
+/* FMD ctrl0 field masks */
+#define SPU2_CIPH_ENCRYPT_EN 0x1 /* 0: decrypt, 1: encrypt */
+#define SPU2_CIPH_TYPE_SHIFT 4
+#define SPU2_CIPH_MODE 0xF00 /* one of spu2_cipher_mode */
+#define SPU2_CIPH_MODE_SHIFT 8
+#define SPU2_CFB_MASK 0x7000 /* cipher feedback mask */
+#define SPU2_CFB_MASK_SHIFT 12
+#define SPU2_PROTO_SEL 0xF00000 /* MACsec, IPsec, TLS... */
+#define SPU2_PROTO_SEL_SHIFT 20
+#define SPU2_HASH_FIRST 0x1000000 /* 1: hash input is input pkt
+ * data
+ */
+#define SPU2_CHK_TAG 0x2000000 /* 1: check digest provided */
+#define SPU2_HASH_TYPE 0x1F0000000 /* one of spu2_hash_type */
+#define SPU2_HASH_TYPE_SHIFT 28
+#define SPU2_HASH_MODE 0xF000000000 /* one of spu2_hash_mode */
+#define SPU2_HASH_MODE_SHIFT 36
+#define SPU2_CIPH_PAD_EN 0x100000000000 /* 1: Add pad to end of payload for
+ * enc
+ */
+#define SPU2_CIPH_PAD 0xFF000000000000 /* cipher pad value */
+#define SPU2_CIPH_PAD_SHIFT 48
+
+/* FMD ctrl1 field masks */
+#define SPU2_TAG_LOC 0x1 /* 1: end of payload, 0: undef */
+#define SPU2_HAS_FR_DATA 0x2 /* 1: msg has frame data */
+#define SPU2_HAS_AAD1 0x4 /* 1: msg has AAD1 field */
+#define SPU2_HAS_NAAD 0x8 /* 1: msg has NAAD field */
+#define SPU2_HAS_AAD2 0x10 /* 1: msg has AAD2 field */
+#define SPU2_HAS_ESN 0x20 /* 1: msg has ESN field */
+#define SPU2_HASH_KEY_LEN 0xFF00 /* len of hash key in bytes.
+ * HMAC only.
+ */
+#define SPU2_HASH_KEY_LEN_SHIFT 8
+#define SPU2_CIPH_KEY_LEN 0xFF00000 /* len of cipher key in bytes */
+#define SPU2_CIPH_KEY_LEN_SHIFT 20
+#define SPU2_GENIV 0x10000000 /* 1: hw generates IV */
+#define SPU2_HASH_IV 0x20000000 /* 1: IV incl in hash */
+#define SPU2_RET_IV 0x40000000 /* 1: return IV in output msg
+ * b4 payload
+ */
+#define SPU2_RET_IV_LEN 0xF00000000 /* length in bytes of IV returned.
+ * 0 = 16 bytes
+ */
+#define SPU2_RET_IV_LEN_SHIFT 32
+#define SPU2_IV_OFFSET 0xF000000000 /* gen IV offset */
+#define SPU2_IV_OFFSET_SHIFT 36
+#define SPU2_IV_LEN 0x1F0000000000 /* length of input IV in bytes */
+#define SPU2_IV_LEN_SHIFT 40
+#define SPU2_HASH_TAG_LEN 0x7F000000000000 /* hash tag length in bytes */
+#define SPU2_HASH_TAG_LEN_SHIFT 48
+#define SPU2_RETURN_MD 0x300000000000000 /* return metadata */
+#define SPU2_RETURN_MD_SHIFT 56
+#define SPU2_RETURN_FD 0x400000000000000
+#define SPU2_RETURN_AAD1 0x800000000000000
+#define SPU2_RETURN_NAAD 0x1000000000000000
+#define SPU2_RETURN_AAD2 0x2000000000000000
+#define SPU2_RETURN_PAY 0x4000000000000000 /* return payload */
+
+/* FMD ctrl2 field masks */
+#define SPU2_AAD1_OFFSET 0xFFF /* byte offset of AAD1 field */
+#define SPU2_AAD1_LEN 0xFF000 /* length of AAD1 in bytes */
+#define SPU2_AAD1_LEN_SHIFT 12
+#define SPU2_AAD2_OFFSET 0xFFF00000 /* byte offset of AAD2 field */
+#define SPU2_AAD2_OFFSET_SHIFT 20
+#define SPU2_PL_OFFSET 0xFFFFFFFF00000000 /* payload offset from AAD2 */
+#define SPU2_PL_OFFSET_SHIFT 32
+
+/* FMD ctrl3 field masks */
+#define SPU2_PL_LEN 0xFFFFFFFF /* payload length in bytes */
+#define SPU2_TLS_LEN 0xFFFF00000000 /* TLS encrypt: cipher len
+ * TLS decrypt: compressed len
+ */
+#define SPU2_TLS_LEN_SHIFT 32
+
+/*
+ * Max value that can be represented in the Payload Length field of the
+ * ctrl3 word of FMD.
+ */
+#define SPU2_MAX_PAYLOAD SPU2_PL_LEN
+
+#define SPU2_VAL_NONE 0
+
+/* CCM B_0 field definitions, common for SPU-M and SPU2 */
+#define CCM_B0_ADATA 0x40
+#define CCM_B0_ADATA_SHIFT 6
+#define CCM_B0_M_PRIME 0x38
+#define CCM_B0_M_PRIME_SHIFT 3
+#define CCM_B0_L_PRIME 0x07
+#define CCM_B0_L_PRIME_SHIFT 0
+#define CCM_ESP_L_VALUE 4
+
+static uint16_t
+spu2_cipher_type_xlate(enum bcmfs_crypto_cipher_algorithm cipher_alg,
+ enum spu2_cipher_type *spu2_type,
+ struct fsattr *key)
+{
+ int ret = 0;
+ int key_size = fsattr_sz(key);
+
+ if (cipher_alg == BCMFS_CRYPTO_CIPHER_AES_XTS)
+ key_size = key_size / 2;
+
+ switch (key_size) {
+ case BCMFS_CRYPTO_AES128:
+ *spu2_type = SPU2_CIPHER_TYPE_AES128;
+ break;
+ case BCMFS_CRYPTO_AES192:
+ *spu2_type = SPU2_CIPHER_TYPE_AES192;
+ break;
+ case BCMFS_CRYPTO_AES256:
+ *spu2_type = SPU2_CIPHER_TYPE_AES256;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int
+spu2_hash_xlate(enum bcmfs_crypto_auth_algorithm auth_alg,
+ struct fsattr *key,
+ enum spu2_hash_type *spu2_type,
+ enum spu2_hash_mode *spu2_mode)
+{
+ *spu2_mode = 0;
+
+ switch (auth_alg) {
+ case BCMFS_CRYPTO_AUTH_NONE:
+ *spu2_type = SPU2_HASH_TYPE_NONE;
+ break;
+ case BCMFS_CRYPTO_AUTH_MD5:
+ *spu2_type = SPU2_HASH_TYPE_MD5;
+ break;
+ case BCMFS_CRYPTO_AUTH_MD5_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_MD5;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA1:
+ *spu2_type = SPU2_HASH_TYPE_SHA1;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA1_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA1;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA224:
+ *spu2_type = SPU2_HASH_TYPE_SHA224;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA224_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA224;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA256:
+ *spu2_type = SPU2_HASH_TYPE_SHA256;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA256_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA256;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA384:
+ *spu2_type = SPU2_HASH_TYPE_SHA384;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA384_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA384;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA512:
+ *spu2_type = SPU2_HASH_TYPE_SHA512;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA512_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA512;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_224:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_224;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_224_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_224;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_256:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_256;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_256_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_256;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_384:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_384;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_384_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_384;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_512:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_512;
+ break;
+ case BCMFS_CRYPTO_AUTH_SHA3_512_HMAC:
+ *spu2_type = SPU2_HASH_TYPE_SHA3_512;
+ *spu2_mode = SPU2_HASH_MODE_HMAC;
+ break;
+ case BCMFS_CRYPTO_AUTH_AES_XCBC_MAC:
+ *spu2_mode = SPU2_HASH_MODE_XCBC_MAC;
+ switch (fsattr_sz(key)) {
+ case BCMFS_CRYPTO_AES128:
+ *spu2_type = SPU2_HASH_TYPE_AES128;
+ break;
+ case BCMFS_CRYPTO_AES192:
+ *spu2_type = SPU2_HASH_TYPE_AES192;
+ break;
+ case BCMFS_CRYPTO_AES256:
+ *spu2_type = SPU2_HASH_TYPE_AES256;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case BCMFS_CRYPTO_AUTH_AES_CMAC:
+ *spu2_mode = SPU2_HASH_MODE_CMAC;
+ switch (fsattr_sz(key)) {
+ case BCMFS_CRYPTO_AES128:
+ *spu2_type = SPU2_HASH_TYPE_AES128;
+ break;
+ case BCMFS_CRYPTO_AES192:
+ *spu2_type = SPU2_HASH_TYPE_AES192;
+ break;
+ case BCMFS_CRYPTO_AES256:
+ *spu2_type = SPU2_HASH_TYPE_AES256;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case BCMFS_CRYPTO_AUTH_AES_GMAC:
+ *spu2_mode = SPU2_HASH_MODE_GCM;
+ switch (fsattr_sz(key)) {
+ case BCMFS_CRYPTO_AES128:
+ *spu2_type = SPU2_HASH_TYPE_AES128;
+ break;
+ case BCMFS_CRYPTO_AES192:
+ *spu2_type = SPU2_HASH_TYPE_AES192;
+ break;
+ case BCMFS_CRYPTO_AES256:
+ *spu2_type = SPU2_HASH_TYPE_AES256;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case BCMFS_CRYPTO_AUTH_AES_CBC_MAC:
+ *spu2_mode = SPU2_HASH_MODE_CBC_MAC;
+ switch (fsattr_sz(key)) {
+ case BCMFS_CRYPTO_AES128:
+ *spu2_type = SPU2_HASH_TYPE_AES128;
+ break;
+ case BCMFS_CRYPTO_AES192:
+ *spu2_type = SPU2_HASH_TYPE_AES192;
+ break;
+ case BCMFS_CRYPTO_AES256:
+ *spu2_type = SPU2_HASH_TYPE_AES256;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case BCMFS_CRYPTO_AUTH_AES_GCM:
+ *spu2_mode = SPU2_HASH_MODE_GCM;
+ break;
+ case BCMFS_CRYPTO_AUTH_AES_CCM:
+ *spu2_mode = SPU2_HASH_MODE_CCM;
+ break;
+ }
+
+ return 0;
+}
+
+static int
+spu2_cipher_xlate(enum bcmfs_crypto_cipher_algorithm cipher_alg,
+ struct fsattr *key,
+ enum spu2_cipher_type *spu2_type,
+ enum spu2_cipher_mode *spu2_mode)
+{
+ int ret = 0;
+
+ switch (cipher_alg) {
+ case BCMFS_CRYPTO_CIPHER_NONE:
+ *spu2_type = SPU2_CIPHER_TYPE_NONE;
+ break;
+ case BCMFS_CRYPTO_CIPHER_DES_ECB:
+ *spu2_mode = SPU2_CIPHER_MODE_ECB;
+ *spu2_type = SPU2_CIPHER_TYPE_DES;
+ break;
+ case BCMFS_CRYPTO_CIPHER_DES_CBC:
+ *spu2_mode = SPU2_CIPHER_MODE_CBC;
+ *spu2_type = SPU2_CIPHER_TYPE_DES;
+ break;
+ case BCMFS_CRYPTO_CIPHER_3DES_ECB:
+ *spu2_mode = SPU2_CIPHER_MODE_ECB;
+ *spu2_type = SPU2_CIPHER_TYPE_3DES;
+ break;
+ case BCMFS_CRYPTO_CIPHER_3DES_CBC:
+ *spu2_mode = SPU2_CIPHER_MODE_CBC;
+ *spu2_type = SPU2_CIPHER_TYPE_3DES;
+ break;
+ case BCMFS_CRYPTO_CIPHER_AES_CBC:
+ *spu2_mode = SPU2_CIPHER_MODE_CBC;
+ ret = spu2_cipher_type_xlate(cipher_alg, spu2_type, key);
+ break;
+ case BCMFS_CRYPTO_CIPHER_AES_ECB:
+ *spu2_mode = SPU2_CIPHER_MODE_ECB;
+ ret = spu2_cipher_type_xlate(cipher_alg, spu2_type, key);
+ break;
+ case BCMFS_CRYPTO_CIPHER_AES_CTR:
+ *spu2_mode = SPU2_CIPHER_MODE_CTR;
+ ret = spu2_cipher_type_xlate(cipher_alg, spu2_type, key);
+ break;
+ case BCMFS_CRYPTO_CIPHER_AES_CCM:
+ *spu2_mode = SPU2_CIPHER_MODE_CCM;
+ ret = spu2_cipher_type_xlate(cipher_alg, spu2_type, key);
+ break;
+ case BCMFS_CRYPTO_CIPHER_AES_GCM:
+ *spu2_mode = SPU2_CIPHER_MODE_GCM;
+ ret = spu2_cipher_type_xlate(cipher_alg, spu2_type, key);
+ break;
+ case BCMFS_CRYPTO_CIPHER_AES_XTS:
+ *spu2_mode = SPU2_CIPHER_MODE_XTS;
+ ret = spu2_cipher_type_xlate(cipher_alg, spu2_type, key);
+ break;
+ case BCMFS_CRYPTO_CIPHER_AES_OFB:
+ *spu2_mode = SPU2_CIPHER_MODE_OFB;
+ ret = spu2_cipher_type_xlate(cipher_alg, spu2_type, key);
+ break;
+ }
+
+ return ret;
+}
+
+static void
+spu2_fmd_ctrl0_write(struct spu2_fmd *fmd,
+ bool is_inbound, bool auth_first,
+ enum spu2_proto_sel protocol,
+ enum spu2_cipher_type cipher_type,
+ enum spu2_cipher_mode cipher_mode,
+ enum spu2_hash_type auth_type,
+ enum spu2_hash_mode auth_mode)
+{
+ uint64_t ctrl0 = 0;
+
+ if (cipher_type != SPU2_CIPHER_TYPE_NONE && !is_inbound)
+ ctrl0 |= SPU2_CIPH_ENCRYPT_EN;
+
+ ctrl0 |= ((uint64_t)cipher_type << SPU2_CIPH_TYPE_SHIFT) |
+ ((uint64_t)cipher_mode << SPU2_CIPH_MODE_SHIFT);
+
+ if (protocol != SPU2_PROTO_RESV)
+ ctrl0 |= (uint64_t)protocol << SPU2_PROTO_SEL_SHIFT;
+
+ if (auth_first)
+ ctrl0 |= SPU2_HASH_FIRST;
+
+ if (is_inbound && auth_type != SPU2_HASH_TYPE_NONE)
+ ctrl0 |= SPU2_CHK_TAG;
+
+ ctrl0 |= (((uint64_t)auth_type << SPU2_HASH_TYPE_SHIFT) |
+ ((uint64_t)auth_mode << SPU2_HASH_MODE_SHIFT));
+
+ fmd->ctrl0 = ctrl0;
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "ctrl0:", &fmd->ctrl0, sizeof(uint64_t));
+#endif
+}
+
+static void
+spu2_fmd_ctrl1_write(struct spu2_fmd *fmd, bool is_inbound,
+ uint64_t assoc_size, uint64_t auth_key_len,
+ uint64_t cipher_key_len, bool gen_iv, bool hash_iv,
+ bool return_iv, uint64_t ret_iv_len,
+ uint64_t ret_iv_offset, uint64_t cipher_iv_len,
+ uint64_t digest_size, bool return_payload, bool return_md)
+{
+ uint64_t ctrl1 = 0;
+
+ if (is_inbound && digest_size != 0)
+ ctrl1 |= SPU2_TAG_LOC;
+
+ if (assoc_size != 0)
+ ctrl1 |= SPU2_HAS_AAD2;
+
+ if (auth_key_len != 0)
+ ctrl1 |= ((auth_key_len << SPU2_HASH_KEY_LEN_SHIFT) &
+ SPU2_HASH_KEY_LEN);
+
+ if (cipher_key_len != 0)
+ ctrl1 |= ((cipher_key_len << SPU2_CIPH_KEY_LEN_SHIFT) &
+ SPU2_CIPH_KEY_LEN);
+
+ if (gen_iv)
+ ctrl1 |= SPU2_GENIV;
+
+ if (hash_iv)
+ ctrl1 |= SPU2_HASH_IV;
+
+ if (return_iv) {
+ ctrl1 |= SPU2_RET_IV;
+ ctrl1 |= ret_iv_len << SPU2_RET_IV_LEN_SHIFT;
+ ctrl1 |= ret_iv_offset << SPU2_IV_OFFSET_SHIFT;
+ }
+
+ ctrl1 |= ((cipher_iv_len << SPU2_IV_LEN_SHIFT) & SPU2_IV_LEN);
+
+ if (digest_size != 0) {
+ ctrl1 |= ((digest_size << SPU2_HASH_TAG_LEN_SHIFT) &
+ SPU2_HASH_TAG_LEN);
+ }
+
+ /*
+ * Let's ask for the output pkt to include FMD, but don't need to
+ * get keys and IVs back in OMD.
+ */
+ if (return_md)
+ ctrl1 |= ((uint64_t)SPU2_RET_FMD_ONLY << SPU2_RETURN_MD_SHIFT);
+ else
+ ctrl1 |= ((uint64_t)SPU2_RET_NO_MD << SPU2_RETURN_MD_SHIFT);
+
+ /* Crypto API does not get assoc data back. So no need for AAD2. */
+
+ if (return_payload)
+ ctrl1 |= SPU2_RETURN_PAY;
+
+ fmd->ctrl1 = ctrl1;
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "ctrl1:", &fmd->ctrl1, sizeof(uint64_t));
+#endif
+}
+
+static void
+spu2_fmd_ctrl2_write(struct spu2_fmd *fmd, uint64_t cipher_offset,
+ uint64_t auth_key_len __rte_unused,
+ uint64_t auth_iv_len __rte_unused,
+ uint64_t cipher_key_len __rte_unused,
+ uint64_t cipher_iv_len __rte_unused)
+{
+ uint64_t aad1_offset;
+ uint64_t aad2_offset;
+ uint16_t aad1_len = 0;
+ uint64_t payload_offset;
+
+ /* AAD1 offset is from start of FD. FD length always 0. */
+ aad1_offset = 0;
+
+ aad2_offset = aad1_offset;
+ payload_offset = cipher_offset;
+ fmd->ctrl2 = aad1_offset |
+ (aad1_len << SPU2_AAD1_LEN_SHIFT) |
+ (aad2_offset << SPU2_AAD2_OFFSET_SHIFT) |
+ (payload_offset << SPU2_PL_OFFSET_SHIFT);
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "ctrl2:", &fmd->ctrl2, sizeof(uint64_t));
+#endif
+}
+
+static void
+spu2_fmd_ctrl3_write(struct spu2_fmd *fmd, uint64_t payload_len)
+{
+ fmd->ctrl3 = payload_len & SPU2_PL_LEN;
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "ctrl3:", &fmd->ctrl3, sizeof(uint64_t));
+#endif
+}
+
+int
+bcmfs_crypto_build_auth_req(struct bcmfs_sym_request *sreq,
+ enum bcmfs_crypto_auth_algorithm a_alg,
+ enum bcmfs_crypto_auth_op auth_op,
+ struct fsattr *src, struct fsattr *dst,
+ struct fsattr *mac, struct fsattr *auth_key)
+{
+ int ret;
+ uint64_t dst_size;
+ int src_index = 0;
+ struct spu2_fmd *fmd;
+ enum spu2_hash_mode spu2_auth_mode;
+ enum spu2_hash_type spu2_auth_type = SPU2_HASH_TYPE_NONE;
+ uint64_t auth_ksize = (auth_key != NULL) ? fsattr_sz(auth_key) : 0;
+ bool is_inbound = (auth_op == BCMFS_CRYPTO_AUTH_OP_VERIFY);
+
+ if (src == NULL)
+ return -EINVAL;
+
+ /* one of dst or mac should not be NULL */
+ if (dst == NULL && mac == NULL)
+ return -EINVAL;
+
+ dst_size = (auth_op == BCMFS_CRYPTO_AUTH_OP_GENERATE) ?
+ fsattr_sz(dst) : fsattr_sz(mac);
+
+ /* spu2 hash algorithm and hash algorithm mode */
+ ret = spu2_hash_xlate(a_alg, auth_key, &spu2_auth_type,
+ &spu2_auth_mode);
+ if (ret)
+ return -EINVAL;
+
+ fmd = &sreq->fmd;
+
+ spu2_fmd_ctrl0_write(fmd, is_inbound, SPU2_VAL_NONE,
+ SPU2_VAL_NONE, SPU2_PROTO_RESV,
+ SPU2_VAL_NONE, spu2_auth_type, spu2_auth_mode);
+
+ spu2_fmd_ctrl1_write(fmd, is_inbound, SPU2_VAL_NONE,
+ auth_ksize, SPU2_VAL_NONE, false,
+ false, SPU2_VAL_NONE, SPU2_VAL_NONE,
+ SPU2_VAL_NONE, SPU2_VAL_NONE,
+ dst_size, SPU2_VAL_NONE, SPU2_VAL_NONE);
+
+ memset(&fmd->ctrl2, 0, sizeof(uint64_t));
+
+ spu2_fmd_ctrl3_write(fmd, fsattr_sz(src));
+
+ /* Source metadata and data pointers */
+ sreq->msgs.srcs_addr[src_index] = sreq->fptr;
+ sreq->msgs.srcs_len[src_index] = sizeof(struct spu2_fmd);
+ src_index++;
+
+ if (auth_key != NULL && fsattr_sz(auth_key) != 0) {
+ memcpy(sreq->auth_key, fsattr_va(auth_key),
+ fsattr_sz(auth_key));
+
+ sreq->msgs.srcs_addr[src_index] = sreq->aptr;
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(auth_key);
+ src_index++;
+ }
+
+ sreq->msgs.srcs_addr[src_index] = fsattr_pa(src);
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(src);
+ src_index++;
+
+ /*
+ * In case of authentication verify operation, use input mac data to
+ * SPU2 engine.
+ */
+ if (auth_op == BCMFS_CRYPTO_AUTH_OP_VERIFY && mac != NULL) {
+ sreq->msgs.srcs_addr[src_index] = fsattr_pa(mac);
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(mac);
+ src_index++;
+ }
+ sreq->msgs.srcs_count = src_index;
+
+ /*
+ * Output packet contains actual output from SPU2 and
+ * the status packet, so the dsts_count is always 2 below.
+ */
+ if (auth_op == BCMFS_CRYPTO_AUTH_OP_GENERATE) {
+ sreq->msgs.dsts_addr[0] = fsattr_pa(dst);
+ sreq->msgs.dsts_len[0] = fsattr_sz(dst);
+ } else {
+ /*
+ * In case of authentication verify operation, provide dummy
+ * location to SPU2 engine to generate hash. This is needed
+ * because SPU2 generates hash even in case of verify operation.
+ */
+ sreq->msgs.dsts_addr[0] = sreq->dptr;
+ sreq->msgs.dsts_len[0] = fsattr_sz(mac);
+ }
+
+ sreq->msgs.dsts_addr[1] = sreq->rptr;
+ sreq->msgs.dsts_len[1] = SPU2_STATUS_LEN;
+ sreq->msgs.dsts_count = 2;
+
+ return 0;
+}
+
+int
+bcmfs_crypto_build_cipher_req(struct bcmfs_sym_request *sreq,
+ enum bcmfs_crypto_cipher_algorithm calgo,
+ enum bcmfs_crypto_cipher_op cipher_op,
+ struct fsattr *src, struct fsattr *dst,
+ struct fsattr *cipher_key, struct fsattr *iv)
+{
+ int ret = 0;
+ int src_index = 0;
+ struct spu2_fmd *fmd;
+ unsigned int xts_keylen;
+ enum spu2_cipher_mode spu2_ciph_mode = 0;
+ enum spu2_cipher_type spu2_ciph_type = SPU2_CIPHER_TYPE_NONE;
+ bool is_inbound = (cipher_op == BCMFS_CRYPTO_CIPHER_OP_DECRYPT);
+
+ if (src == NULL || dst == NULL || iv == NULL)
+ return -EINVAL;
+
+ fmd = &sreq->fmd;
+
+ /* spu2 cipher algorithm and cipher algorithm mode */
+ ret = spu2_cipher_xlate(calgo, cipher_key,
+ &spu2_ciph_type, &spu2_ciph_mode);
+ if (ret)
+ return -EINVAL;
+
+ spu2_fmd_ctrl0_write(fmd, is_inbound, SPU2_VAL_NONE,
+ SPU2_PROTO_RESV, spu2_ciph_type, spu2_ciph_mode,
+ SPU2_VAL_NONE, SPU2_VAL_NONE);
+
+ spu2_fmd_ctrl1_write(fmd, SPU2_VAL_NONE, SPU2_VAL_NONE, SPU2_VAL_NONE,
+ fsattr_sz(cipher_key), false, false,
+ SPU2_VAL_NONE, SPU2_VAL_NONE, SPU2_VAL_NONE,
+ fsattr_sz(iv), SPU2_VAL_NONE, SPU2_VAL_NONE,
+ SPU2_VAL_NONE);
+
+ /* Nothing for FMD2 */
+ memset(&fmd->ctrl2, 0, sizeof(uint64_t));
+
+ spu2_fmd_ctrl3_write(fmd, fsattr_sz(src));
+
+ /* Source metadata and data pointers */
+ sreq->msgs.srcs_addr[src_index] = sreq->fptr;
+ sreq->msgs.srcs_len[src_index] = sizeof(struct spu2_fmd);
+ src_index++;
+
+ if (cipher_key != NULL && fsattr_sz(cipher_key) != 0) {
+ if (calgo == BCMFS_CRYPTO_CIPHER_AES_XTS) {
+ xts_keylen = fsattr_sz(cipher_key) / 2;
+ memcpy(sreq->cipher_key,
+ (uint8_t *)fsattr_va(cipher_key) + xts_keylen,
+ xts_keylen);
+ memcpy(sreq->cipher_key + xts_keylen,
+ fsattr_va(cipher_key), xts_keylen);
+ } else {
+ memcpy(sreq->cipher_key,
+ fsattr_va(cipher_key), fsattr_sz(cipher_key));
+ }
+
+ sreq->msgs.srcs_addr[src_index] = sreq->cptr;
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(cipher_key);
+ src_index++;
+ }
+
+ if (iv != NULL && fsattr_sz(iv) != 0) {
+ memcpy(sreq->iv,
+ fsattr_va(iv), fsattr_sz(iv));
+ sreq->msgs.srcs_addr[src_index] = sreq->iptr;
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(iv);
+ src_index++;
+ }
+
+ sreq->msgs.srcs_addr[src_index] = fsattr_pa(src);
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(src);
+ src_index++;
+ sreq->msgs.srcs_count = src_index;
+
+ /**
+ * Output packet contains actual output from SPU2 and
+ * the status packet, so the dsts_count is always 2 below.
+ */
+ sreq->msgs.dsts_addr[0] = fsattr_pa(dst);
+ sreq->msgs.dsts_len[0] = fsattr_sz(dst);
+
+ sreq->msgs.dsts_addr[1] = sreq->rptr;
+ sreq->msgs.dsts_len[1] = SPU2_STATUS_LEN;
+ sreq->msgs.dsts_count = 2;
+
+ return 0;
+}
+
+static void
+bcmfs_crypto_ccm_update_iv(uint8_t *ivbuf,
+ unsigned int *ivlen, bool is_esp)
+{
+ int L; /* size of length field, in bytes */
+
+ /*
+ * In RFC4309 mode, L is fixed at 4 bytes; otherwise, IV from
+ * testmgr contains (L-1) in bottom 3 bits of first byte,
+ * per RFC 3610.
+ */
+ if (is_esp)
+ L = CCM_ESP_L_VALUE;
+ else
+ L = ((ivbuf[0] & CCM_B0_L_PRIME) >>
+ CCM_B0_L_PRIME_SHIFT) + 1;
+
+ /* SPU2 doesn't want these length bytes nor the first byte... */
+ *ivlen -= (1 + L);
+ memmove(ivbuf, &ivbuf[1], *ivlen);
+}
+
+int
+bcmfs_crypto_build_aead_request(struct bcmfs_sym_request *sreq,
+ enum bcmfs_crypto_cipher_algorithm cipher_alg,
+ enum bcmfs_crypto_cipher_op cipher_op,
+ enum bcmfs_crypto_auth_algorithm auth_alg,
+ enum bcmfs_crypto_auth_op auth_op,
+ struct fsattr *src, struct fsattr *dst,
+ struct fsattr *cipher_key,
+ struct fsattr *auth_key,
+ struct fsattr *iv, struct fsattr *aad,
+ struct fsattr *digest, bool cipher_first)
+{
+ int ret = 0;
+ int src_index = 0;
+ int dst_index = 0;
+ bool auth_first = 0;
+ struct spu2_fmd *fmd;
+ unsigned int payload_len;
+ enum spu2_cipher_mode spu2_ciph_mode = 0;
+ enum spu2_hash_mode spu2_auth_mode = 0;
+ uint64_t aad_size = (aad != NULL) ? fsattr_sz(aad) : 0;
+ unsigned int iv_size = (iv != NULL) ? fsattr_sz(iv) : 0;
+ enum spu2_cipher_type spu2_ciph_type = SPU2_CIPHER_TYPE_NONE;
+ uint64_t auth_ksize = (auth_key != NULL) ?
+ fsattr_sz(auth_key) : 0;
+ uint64_t cipher_ksize = (cipher_key != NULL) ?
+ fsattr_sz(cipher_key) : 0;
+ uint64_t digest_size = (digest != NULL) ?
+ fsattr_sz(digest) : 0;
+ enum spu2_hash_type spu2_auth_type = SPU2_HASH_TYPE_NONE;
+ bool is_inbound = (auth_op == BCMFS_CRYPTO_AUTH_OP_VERIFY);
+
+ if (src == NULL)
+ return -EINVAL;
+
+ payload_len = fsattr_sz(src);
+ if (!payload_len) {
+ BCMFS_DP_LOG(ERR, "null payload not supported");
+ return -EINVAL;
+ }
+
+ /* spu2 hash algorithm and hash algorithm mode */
+ ret = spu2_hash_xlate(auth_alg, auth_key, &spu2_auth_type,
+ &spu2_auth_mode);
+ if (ret)
+ return -EINVAL;
+
+ /* spu2 cipher algorithm and cipher algorithm mode */
+ ret = spu2_cipher_xlate(cipher_alg, cipher_key, &spu2_ciph_type,
+ &spu2_ciph_mode);
+ if (ret) {
+ BCMFS_DP_LOG(ERR, "cipher xlate error");
+ return -EINVAL;
+ }
+
+ auth_first = cipher_first ? 0 : 1;
+
+ if (cipher_alg == BCMFS_CRYPTO_CIPHER_AES_GCM) {
+ spu2_auth_type = spu2_ciph_type;
+ /*
+ * SPU2 needs in total 12 bytes of IV
+ * ie IV of 8 bytes(random number) and 4 bytes of salt.
+ */
+ if (fsattr_sz(iv) > 12)
+ iv_size = 12;
+
+ /*
+ * On SPU 2, aes gcm cipher first on encrypt, auth first on
+ * decrypt
+ */
+
+ auth_first = (cipher_op == BCMFS_CRYPTO_CIPHER_OP_ENCRYPT) ?
+ 0 : 1;
+ }
+
+ if (iv != NULL && fsattr_sz(iv) != 0)
+ memcpy(sreq->iv, fsattr_va(iv), fsattr_sz(iv));
+
+ if (cipher_alg == BCMFS_CRYPTO_CIPHER_AES_CCM) {
+ spu2_auth_type = spu2_ciph_type;
+ if (iv != NULL) {
+ memcpy(sreq->iv, fsattr_va(iv),
+ fsattr_sz(iv));
+ iv_size = fsattr_sz(iv);
+ bcmfs_crypto_ccm_update_iv(sreq->iv, &iv_size, false);
+ }
+
+ /* opposite for ccm (auth 1st on encrypt) */
+ auth_first = (cipher_op == BCMFS_CRYPTO_CIPHER_OP_ENCRYPT) ?
+ 1 : 0;
+ }
+
+ fmd = &sreq->fmd;
+
+ spu2_fmd_ctrl0_write(fmd, is_inbound, auth_first, SPU2_PROTO_RESV,
+ spu2_ciph_type, spu2_ciph_mode,
+ spu2_auth_type, spu2_auth_mode);
+
+ spu2_fmd_ctrl1_write(fmd, is_inbound, aad_size, auth_ksize,
+ cipher_ksize, false, false, SPU2_VAL_NONE,
+ SPU2_VAL_NONE, SPU2_VAL_NONE, iv_size,
+ digest_size, false, SPU2_VAL_NONE);
+
+ spu2_fmd_ctrl2_write(fmd, aad_size, auth_ksize, 0,
+ cipher_ksize, iv_size);
+
+ spu2_fmd_ctrl3_write(fmd, payload_len);
+
+ /* Source metadata and data pointers */
+ sreq->msgs.srcs_addr[src_index] = sreq->fptr;
+ sreq->msgs.srcs_len[src_index] = sizeof(struct spu2_fmd);
+ src_index++;
+
+ if (auth_key != NULL && fsattr_sz(auth_key) != 0) {
+ memcpy(sreq->auth_key,
+ fsattr_va(auth_key), fsattr_sz(auth_key));
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "auth key:", fsattr_va(auth_key),
+ fsattr_sz(auth_key));
+#endif
+ sreq->msgs.srcs_addr[src_index] = sreq->aptr;
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(auth_key);
+ src_index++;
+ }
+
+ if (cipher_key != NULL && fsattr_sz(cipher_key) != 0) {
+ memcpy(sreq->cipher_key,
+ fsattr_va(cipher_key), fsattr_sz(cipher_key));
+
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "cipher key:", fsattr_va(cipher_key),
+ fsattr_sz(cipher_key));
+#endif
+ sreq->msgs.srcs_addr[src_index] = sreq->cptr;
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(cipher_key);
+ src_index++;
+ }
+
+ if (iv != NULL && fsattr_sz(iv) != 0) {
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "iv key:", fsattr_va(iv),
+ fsattr_sz(iv));
+#endif
+ sreq->msgs.srcs_addr[src_index] = sreq->iptr;
+ sreq->msgs.srcs_len[src_index] = iv_size;
+ src_index++;
+ }
+
+ if (aad != NULL && fsattr_sz(aad) != 0) {
+#if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
+ BCMFS_DP_HEXDUMP_LOG(DEBUG, "aad :", fsattr_va(aad),
+ fsattr_sz(aad));
+#endif
+ sreq->msgs.srcs_addr[src_index] = fsattr_pa(aad);
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(aad);
+ src_index++;
+ }
+
+ sreq->msgs.srcs_addr[src_index] = fsattr_pa(src);
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(src);
+ src_index++;
+
+
+ if (auth_op == BCMFS_CRYPTO_AUTH_OP_VERIFY && digest != NULL &&
+ fsattr_sz(digest) != 0) {
+ sreq->msgs.srcs_addr[src_index] = fsattr_pa(digest);
+ sreq->msgs.srcs_len[src_index] = fsattr_sz(digest);
+ src_index++;
+ }
+ sreq->msgs.srcs_count = src_index;
+
+ if (dst != NULL) {
+ sreq->msgs.dsts_addr[dst_index] = fsattr_pa(dst);
+ sreq->msgs.dsts_len[dst_index] = fsattr_sz(dst);
+ dst_index++;
+ }
+
+ if (auth_op == BCMFS_CRYPTO_AUTH_OP_VERIFY) {
+ /*
+ * In case of decryption digest data is generated by
+ * SPU2 engine but application doesn't need digest
+ * as such. So program dummy location to capture
+ * digest data
+ */
+ if (digest != NULL && fsattr_sz(digest) != 0) {
+ sreq->msgs.dsts_addr[dst_index] =
+ sreq->dptr;
+ sreq->msgs.dsts_len[dst_index] =
+ fsattr_sz(digest);
+ dst_index++;
+ }
+ } else {
+ if (digest != NULL && fsattr_sz(digest) != 0) {
+ sreq->msgs.dsts_addr[dst_index] =
+ fsattr_pa(digest);
+ sreq->msgs.dsts_len[dst_index] =
+ fsattr_sz(digest);
+ dst_index++;
+ }
+ }
+
+ sreq->msgs.dsts_addr[dst_index] = sreq->rptr;
+ sreq->msgs.dsts_len[dst_index] = SPU2_STATUS_LEN;
+ dst_index++;
+ sreq->msgs.dsts_count = dst_index;
+
+ return 0;
+}
diff --git a/drivers/crypto/bcmfs/bcmfs_sym_engine.h b/drivers/crypto/bcmfs/bcmfs_sym_engine.h
new file mode 100644
index 000000000..29cfb4dc2
--- /dev/null
+++ b/drivers/crypto/bcmfs/bcmfs_sym_engine.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Broadcom
+ * All rights reserved.
+ */
+
+#ifndef _BCMFS_SYM_ENGINE_H_
+#define _BCMFS_SYM_ENGINE_H_
+
+#include "bcmfs_dev_msg.h"
+#include "bcmfs_sym_defs.h"
+#include "bcmfs_sym_req.h"
+
+/* structure to hold element's arrtibutes */
+struct fsattr {
+ void *va;
+ uint64_t pa;
+ uint64_t sz;
+};
+
+#define fsattr_va(__ptr) ((__ptr)->va)
+#define fsattr_pa(__ptr) ((__ptr)->pa)
+#define fsattr_sz(__ptr) ((__ptr)->sz)
+
+/*
+ * Macros for Crypto h/w constraints
+ */
+
+#define BCMFS_CRYPTO_AES_BLOCK_SIZE 16
+#define BCMFS_CRYPTO_AES_MIN_KEY_SIZE 16
+#define BCMFS_CRYPTO_AES_MAX_KEY_SIZE 32
+
+#define BCMFS_CRYPTO_DES_BLOCK_SIZE 8
+#define BCMFS_CRYPTO_DES_KEY_SIZE 8
+
+#define BCMFS_CRYPTO_3DES_BLOCK_SIZE 8
+#define BCMFS_CRYPTO_3DES_KEY_SIZE (3 * 8)
+
+#define BCMFS_CRYPTO_MD5_DIGEST_SIZE 16
+#define BCMFS_CRYPTO_MD5_BLOCK_SIZE 64
+
+#define BCMFS_CRYPTO_SHA1_DIGEST_SIZE 20
+#define BCMFS_CRYPTO_SHA1_BLOCK_SIZE 64
+
+#define BCMFS_CRYPTO_SHA224_DIGEST_SIZE 28
+#define BCMFS_CRYPTO_SHA224_BLOCK_SIZE 64
+
+#define BCMFS_CRYPTO_SHA256_DIGEST_SIZE 32
+#define BCMFS_CRYPTO_SHA256_BLOCK_SIZE 64
+
+#define BCMFS_CRYPTO_SHA384_DIGEST_SIZE 48
+#define BCMFS_CRYPTO_SHA384_BLOCK_SIZE 128
+
+#define BCMFS_CRYPTO_SHA512_DIGEST_SIZE 64
+#define BCMFS_CRYPTO_SHA512_BLOCK_SIZE 128
+
+#define BCMFS_CRYPTO_SHA3_224_DIGEST_SIZE (224 / 8)
+#define BCMFS_CRYPTO_SHA3_224_BLOCK_SIZE (200 - 2 * \
+ BCMFS_CRYPTO_SHA3_224_DIGEST_SIZE)
+
+#define BCMFS_CRYPTO_SHA3_256_DIGEST_SIZE (256 / 8)
+#define BCMFS_CRYPTO_SHA3_256_BLOCK_SIZE (200 - 2 * \
+ BCMFS_CRYPTO_SHA3_256_DIGEST_SIZE)
+
+#define BCMFS_CRYPTO_SHA3_384_DIGEST_SIZE (384 / 8)
+#define BCMFS_CRYPTO_SHA3_384_BLOCK_SIZE (200 - 2 * \
+ BCMFS_CRYPTO_SHA3_384_DIGEST_SIZE)
+
+#define BCMFS_CRYPTO_SHA3_512_DIGEST_SIZE (512 / 8)
+#define BCMFS_CRYPTO_SHA3_512_BLOCK_SIZE (200 - 2 * \
+ BCMFS_CRYPTO_SHA3_512_DIGEST_SIZE)
+
+enum bcmfs_crypto_aes_cipher_key {
+ BCMFS_CRYPTO_AES128 = 16,
+ BCMFS_CRYPTO_AES192 = 24,
+ BCMFS_CRYPTO_AES256 = 32,
+};
+
+int
+bcmfs_crypto_build_cipher_req(struct bcmfs_sym_request *req,
+ enum bcmfs_crypto_cipher_algorithm c_algo,
+ enum bcmfs_crypto_cipher_op cop,
+ struct fsattr *src, struct fsattr *dst,
+ struct fsattr *key, struct fsattr *iv);
+
+int
+bcmfs_crypto_build_auth_req(struct bcmfs_sym_request *req,
+ enum bcmfs_crypto_auth_algorithm a_algo,
+ enum bcmfs_crypto_auth_op aop,
+ struct fsattr *src, struct fsattr *dst,
+ struct fsattr *mac, struct fsattr *key);
+
+int
+bcmfs_crypto_build_aead_request(struct bcmfs_sym_request *req,
+ enum bcmfs_crypto_cipher_algorithm c_algo,
+ enum bcmfs_crypto_cipher_op cop,
+ enum bcmfs_crypto_auth_algorithm a_algo,
+ enum bcmfs_crypto_auth_op aop,
+ struct fsattr *src, struct fsattr *dst,
+ struct fsattr *cipher_key, struct fsattr *auth_key,
+ struct fsattr *iv, struct fsattr *aad,
+ struct fsattr *digest, bool cipher_first);
+
+#endif /* _BCMFS_SYM_ENGINE_H_ */
diff --git a/drivers/crypto/bcmfs/bcmfs_sym_pmd.c b/drivers/crypto/bcmfs/bcmfs_sym_pmd.c
index 381ca8ea4..568797b4f 100644
--- a/drivers/crypto/bcmfs/bcmfs_sym_pmd.c
+++ b/drivers/crypto/bcmfs/bcmfs_sym_pmd.c
@@ -132,6 +132,12 @@ static void
spu_req_init(struct bcmfs_sym_request *sr, rte_iova_t iova __rte_unused)
{
memset(sr, 0, sizeof(*sr));
+ sr->fptr = iova;
+ sr->cptr = iova + offsetof(struct bcmfs_sym_request, cipher_key);
+ sr->aptr = iova + offsetof(struct bcmfs_sym_request, auth_key);
+ sr->iptr = iova + offsetof(struct bcmfs_sym_request, iv);
+ sr->dptr = iova + offsetof(struct bcmfs_sym_request, digest);
+ sr->rptr = iova + offsetof(struct bcmfs_sym_request, resp);
}
static void
@@ -244,6 +250,7 @@ bcmfs_sym_pmd_enqueue_op_burst(void *queue_pair,
uint16_t nb_ops)
{
int i, j;
+ int retval;
uint16_t enq = 0;
struct bcmfs_sym_request *sreq;
struct bcmfs_sym_session *sess;
@@ -273,6 +280,11 @@ bcmfs_sym_pmd_enqueue_op_burst(void *queue_pair,
/* save context */
qp->infl_msgs[i] = &sreq->msgs;
qp->infl_msgs[i]->ctx = (void *)sreq;
+
+ /* pre process the request crypto h/w acceleration */
+ retval = bcmfs_process_sym_crypto_op(ops[i], sess, sreq);
+ if (unlikely(retval < 0))
+ goto enqueue_err;
}
/* Send burst request to hw QP */
enq = bcmfs_enqueue_op_burst(qp, (void **)qp->infl_msgs, i);
@@ -289,6 +301,17 @@ bcmfs_sym_pmd_enqueue_op_burst(void *queue_pair,
return enq;
}
+static void bcmfs_sym_set_request_status(struct rte_crypto_op *op,
+ struct bcmfs_sym_request *out)
+{
+ if (*out->resp == BCMFS_SYM_RESPONSE_SUCCESS)
+ op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ else if (*out->resp == BCMFS_SYM_RESPONSE_HASH_TAG_ERROR)
+ op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+ else
+ op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+}
+
static uint16_t
bcmfs_sym_pmd_dequeue_op_burst(void *queue_pair,
struct rte_crypto_op **ops,
@@ -308,6 +331,9 @@ bcmfs_sym_pmd_dequeue_op_burst(void *queue_pair,
for (i = 0; i < deq; i++) {
sreq = (struct bcmfs_sym_request *)qp->infl_msgs[i]->ctx;
+ /* set the status based on the response from the crypto h/w */
+ bcmfs_sym_set_request_status(sreq->op, sreq);
+
ops[pkts++] = sreq->op;
rte_mempool_put(qp->sr_mp, sreq);
diff --git a/drivers/crypto/bcmfs/bcmfs_sym_req.h b/drivers/crypto/bcmfs/bcmfs_sym_req.h
index 0f0b051f1..e53c50adc 100644
--- a/drivers/crypto/bcmfs/bcmfs_sym_req.h
+++ b/drivers/crypto/bcmfs/bcmfs_sym_req.h
@@ -6,13 +6,53 @@
#ifndef _BCMFS_SYM_REQ_H_
#define _BCMFS_SYM_REQ_H_
+#include <rte_cryptodev.h>
+
#include "bcmfs_dev_msg.h"
+#include "bcmfs_sym_defs.h"
+
+/* Fixed SPU2 Metadata */
+struct spu2_fmd {
+ uint64_t ctrl0;
+ uint64_t ctrl1;
+ uint64_t ctrl2;
+ uint64_t ctrl3;
+};
/*
* This structure hold the supportive data required to process a
* rte_crypto_op
*/
struct bcmfs_sym_request {
+ /* spu2 engine related data */
+ struct spu2_fmd fmd;
+ /* cipher key */
+ uint8_t cipher_key[BCMFS_MAX_KEY_SIZE];
+ /* auth key */
+ uint8_t auth_key[BCMFS_MAX_KEY_SIZE];
+ /* iv key */
+ uint8_t iv[BCMFS_MAX_IV_SIZE];
+ /* digest data output from crypto h/w */
+ uint8_t digest[BCMFS_MAX_DIGEST_SIZE];
+ /* 2-Bytes response from crypto h/w */
+ uint8_t resp[2];
+ /*
+ * Below are all iovas for above members
+ * from top
+ */
+ /* iova for fmd */
+ rte_iova_t fptr;
+ /* iova for cipher key */
+ rte_iova_t cptr;
+ /* iova for auth key */
+ rte_iova_t aptr;
+ /* iova for iv key */
+ rte_iova_t iptr;
+ /* iova for digest */
+ rte_iova_t dptr;
+ /* iova for response */
+ rte_iova_t rptr;
+
/* bcmfs qp message for h/w queues to process */
struct bcmfs_qp_message msgs;
/* crypto op */
diff --git a/drivers/crypto/bcmfs/meson.build b/drivers/crypto/bcmfs/meson.build
index 2e86c733e..7aa0f05db 100644
--- a/drivers/crypto/bcmfs/meson.build
+++ b/drivers/crypto/bcmfs/meson.build
@@ -14,5 +14,7 @@ sources = files(
'hw/bcmfs_rm_common.c',
'bcmfs_sym_pmd.c',
'bcmfs_sym_capabilities.c',
- 'bcmfs_sym_session.c'
+ 'bcmfs_sym_session.c',
+ 'bcmfs_sym.c',
+ 'bcmfs_sym_engine.c'
)
--
2.17.1
next prev parent reply other threads:[~2020-08-12 6:33 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-11 14:58 [dpdk-dev] [PATCH 0 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 7/8] crypto/bcmfs: add crypto h/w module Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-08-12 6:31 ` Vikas Gupta [this message]
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-08-12 13:44 ` Dybkowski, AdamX
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-09-28 18:49 ` Akhil Goyal
2020-09-29 10:52 ` Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-09-28 19:00 ` Akhil Goyal
2020-09-29 11:01 ` Vikas Gupta
2020-09-29 12:39 ` Akhil Goyal
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-09-28 19:29 ` Akhil Goyal
2020-09-29 11:04 ` Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-09-28 19:46 ` Akhil Goyal
2020-09-29 11:12 ` Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 7/8] crypto/bcmfs: add crypto h/w module Vikas Gupta
2020-09-28 20:00 ` Akhil Goyal
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-09-28 20:01 ` Akhil Goyal
2020-09-28 20:06 ` [dpdk-dev] [PATCH v2 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Akhil Goyal
2020-10-05 15:39 ` Akhil Goyal
2020-10-05 16:46 ` Ajit Khaparde
2020-10-05 17:01 ` Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 " Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 7/8] crypto/bcmfs: add crypto h/w module Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 3/8] crypto/bcmfs: add queue pair management API Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 4/8] crypto/bcmfs: add HW queue pair operations Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 7/8] crypto/bcmfs: add crypto HW module Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-10-15 0:50 ` Thomas Monjalon
2020-10-15 0:55 ` Thomas Monjalon
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 3/8] crypto/bcmfs: add queue pair management API Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 4/8] crypto/bcmfs: add HW queue pair operations Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 7/8] crypto/bcmfs: add crypto HW module Vikas Gupta
2020-10-07 17:19 ` [dpdk-dev] [PATCH v5 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-10-09 15:00 ` Akhil Goyal
2020-10-09 15:00 ` [dpdk-dev] [PATCH v5 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Akhil Goyal
2020-10-16 2:15 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200812063127.8687-8-vikas.gupta@broadcom.com \
--to=vikas.gupta@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=raveendra.padasalagi@broadcom.com \
--cc=vikram.prakash@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).