From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dev@dpdk.org, Vijay Srivastava <vijays@solarflare.com>
Subject: [dpdk-dev] [PATCH v4 1/8] common/sfc_efx/base: add base virtio support for vDPA
Date: Tue, 16 Mar 2021 11:58:25 +0300 [thread overview]
Message-ID: <20210316085832.942481-2-andrew.rybchenko@oktetlabs.ru> (raw)
In-Reply-To: <20210316085832.942481-1-andrew.rybchenko@oktetlabs.ru>
From: Vijay Srivastava <vijays@solarflare.com>
In the vDPA mode, only data path is offloaded in the hardware and
control path still goes through the hypervisor and it configures
virtqueues via vDPA driver so new virtqueue APIs are required.
Implement virtio init/fini and virtqueue create/destroy APIs.
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
---
drivers/common/sfc_efx/base/efx.h | 109 +++++++++++
drivers/common/sfc_efx/base/efx_check.h | 6 +
drivers/common/sfc_efx/base/efx_impl.h | 36 ++++
drivers/common/sfc_efx/base/efx_virtio.c | 216 +++++++++++++++++++++
drivers/common/sfc_efx/base/meson.build | 2 +
drivers/common/sfc_efx/base/rhead_impl.h | 17 ++
drivers/common/sfc_efx/base/rhead_virtio.c | 190 ++++++++++++++++++
drivers/common/sfc_efx/efsys.h | 2 +
8 files changed, 578 insertions(+)
create mode 100644 drivers/common/sfc_efx/base/efx_virtio.c
create mode 100644 drivers/common/sfc_efx/base/rhead_virtio.c
diff --git a/drivers/common/sfc_efx/base/efx.h b/drivers/common/sfc_efx/base/efx.h
index 2c820022b2..c2c73bd382 100644
--- a/drivers/common/sfc_efx/base/efx.h
+++ b/drivers/common/sfc_efx/base/efx.h
@@ -4368,6 +4368,115 @@ efx_mae_action_rule_remove(
#endif /* EFSYS_OPT_MAE */
+#if EFSYS_OPT_VIRTIO
+
+/* A Virtio net device can have one or more pairs of Rx/Tx virtqueues
+ * while virtio block device has a single virtqueue,
+ * for further details refer section of 4.2.3 of SF-120734
+ */
+typedef enum efx_virtio_vq_type_e {
+ EFX_VIRTIO_VQ_TYPE_NET_RXQ,
+ EFX_VIRTIO_VQ_TYPE_NET_TXQ,
+ EFX_VIRTIO_VQ_TYPE_BLOCK,
+ EFX_VIRTIO_VQ_NTYPES
+} efx_virtio_vq_type_t;
+
+typedef struct efx_virtio_vq_dyncfg_s {
+ /*
+ * If queue is being created to be migrated then this
+ * should be the FINAL_PIDX value returned by MC_CMD_VIRTIO_FINI_QUEUE
+ * of the queue being migrated from. Otherwise, it should be zero.
+ */
+ uint32_t evvd_vq_pidx;
+ /*
+ * If this queue is being created to be migrated then this
+ * should be the FINAL_CIDX value returned by MC_CMD_VIRTIO_FINI_QUEUE
+ * of the queue being migrated from. Otherwise, it should be zero.
+ */
+ uint32_t evvd_vq_cidx;
+} efx_virtio_vq_dyncfg_t;
+
+/*
+ * Virtqueue size must be a power of 2, maximum size is 32768
+ * (see VIRTIO v1.1 section 2.6)
+ */
+#define EFX_VIRTIO_MAX_VQ_SIZE 0x8000
+
+typedef struct efx_virtio_vq_cfg_s {
+ unsigned int evvc_vq_num;
+ efx_virtio_vq_type_t evvc_type;
+ /*
+ * vDPA as VF : It is target VF number if queue is being created on VF.
+ * vDPA as PF : If queue to be created on PF then it should be
+ * EFX_PCI_VF_INVALID.
+ */
+ uint16_t evvc_target_vf;
+ /*
+ * Maximum virtqueue size is EFX_VIRTIO_MAX_VQ_SIZE and
+ * virtqueue size 0 means the queue is unavailable.
+ */
+ uint32_t evvc_vq_size;
+ efsys_dma_addr_t evvc_desc_tbl_addr;
+ efsys_dma_addr_t evvc_avail_ring_addr;
+ efsys_dma_addr_t evvc_used_ring_addr;
+ /* MSIX vector number for the virtqueue or 0xFFFF if MSIX is not used */
+ uint16_t evvc_msix_vector;
+ /*
+ * evvc_pas_id contains a PCIe address space identifier if the queue
+ * uses PASID.
+ */
+ boolean_t evvc_use_pasid;
+ uint32_t evvc_pas_id;
+ /* Negotiated virtio features to be applied to this virtqueue */
+ uint64_t evcc_features;
+} efx_virtio_vq_cfg_t;
+
+typedef struct efx_virtio_vq_s efx_virtio_vq_t;
+
+LIBEFX_API
+extern __checkReturn efx_rc_t
+efx_virtio_init(
+ __in efx_nic_t *enp);
+
+LIBEFX_API
+extern void
+efx_virtio_fini(
+ __in efx_nic_t *enp);
+
+/*
+ * When virtio net driver in the guest sets VIRTIO_CONFIG_STATUS_DRIVER_OK bit,
+ * hypervisor starts configuring all the virtqueues in the device. When the
+ * vhost_user has received VHOST_USER_SET_VRING_ENABLE for all the virtqueues,
+ * then it invokes VDPA driver callback dev_conf. APIs qstart and qcreate would
+ * be invoked from dev_conf callback to create the virtqueues, For further
+ * details refer SF-122427.
+ */
+LIBEFX_API
+extern __checkReturn efx_rc_t
+efx_virtio_qcreate(
+ __in efx_nic_t *enp,
+ __deref_out efx_virtio_vq_t **evvpp);
+
+LIBEFX_API
+extern __checkReturn efx_rc_t
+efx_virtio_qstart(
+ __in efx_virtio_vq_t *evvp,
+ __in efx_virtio_vq_cfg_t *evvcp,
+ __in_opt efx_virtio_vq_dyncfg_t *evvdp);
+
+LIBEFX_API
+extern __checkReturn efx_rc_t
+efx_virtio_qstop(
+ __in efx_virtio_vq_t *evvp,
+ __out_opt efx_virtio_vq_dyncfg_t *evvdp);
+
+LIBEFX_API
+extern void
+efx_virtio_qdestroy(
+ __in efx_virtio_vq_t *evvp);
+
+#endif /* EFSYS_OPT_VIRTIO */
+
#ifdef __cplusplus
}
#endif
diff --git a/drivers/common/sfc_efx/base/efx_check.h b/drivers/common/sfc_efx/base/efx_check.h
index 9e288f272a..86a6d92fef 100644
--- a/drivers/common/sfc_efx/base/efx_check.h
+++ b/drivers/common/sfc_efx/base/efx_check.h
@@ -407,4 +407,10 @@
# endif
#endif /* EFSYS_OPT_MAE */
+#if EFSYS_OPT_VIRTIO
+# if !EFSYS_OPT_RIVERHEAD
+# error "VIRTIO requires RIVERHEAD"
+# endif
+#endif /* EFSYS_OPT_VIRTIO */
+
#endif /* _SYS_EFX_CHECK_H */
diff --git a/drivers/common/sfc_efx/base/efx_impl.h b/drivers/common/sfc_efx/base/efx_impl.h
index a0628e6927..f27d9fa82c 100644
--- a/drivers/common/sfc_efx/base/efx_impl.h
+++ b/drivers/common/sfc_efx/base/efx_impl.h
@@ -65,6 +65,7 @@ extern "C" {
#define EFX_MOD_TUNNEL 0x00004000
#define EFX_MOD_EVB 0x00008000
#define EFX_MOD_PROXY 0x00010000
+#define EFX_MOD_VIRTIO 0x00020000
#define EFX_RESET_PHY 0x00000001
#define EFX_RESET_RXQ_ERR 0x00000002
@@ -308,6 +309,16 @@ typedef struct efx_tunnel_ops_s {
} efx_tunnel_ops_t;
#endif /* EFSYS_OPT_TUNNEL */
+#if EFSYS_OPT_VIRTIO
+typedef struct efx_virtio_ops_s {
+ efx_rc_t (*evo_virtio_qstart)(efx_virtio_vq_t *,
+ efx_virtio_vq_cfg_t *,
+ efx_virtio_vq_dyncfg_t *);
+ efx_rc_t (*evo_virtio_qstop)(efx_virtio_vq_t *,
+ efx_virtio_vq_dyncfg_t *);
+} efx_virtio_ops_t;
+#endif /* EFSYS_OPT_VIRTIO */
+
typedef struct efx_port_s {
efx_mac_type_t ep_mac_type;
uint32_t ep_phy_type;
@@ -858,6 +869,9 @@ struct efx_nic_s {
#if EFSYS_OPT_VPD
const efx_vpd_ops_t *en_evpdop;
#endif /* EFSYS_OPT_VPD */
+#if EFSYS_OPT_VIRTIO
+ const efx_virtio_ops_t *en_evop;
+#endif /* EFSYS_OPT_VPD */
#if EFSYS_OPT_RX_SCALE
efx_rx_hash_support_t en_hash_support;
efx_rx_scale_context_type_t en_rss_context_type;
@@ -1750,6 +1764,28 @@ struct efx_mae_actions_s {
#endif /* EFSYS_OPT_MAE */
+#if EFSYS_OPT_VIRTIO
+
+#define EFX_VQ_MAGIC 0x026011950
+
+typedef enum efx_virtio_vq_state_e {
+ EFX_VIRTIO_VQ_STATE_UNKNOWN = 0,
+ EFX_VIRTIO_VQ_STATE_INITIALIZED,
+ EFX_VIRTIO_VQ_STATE_STARTED,
+ EFX_VIRTIO_VQ_NSTATES
+} efx_virtio_vq_state_t;
+
+struct efx_virtio_vq_s {
+ uint32_t evv_magic;
+ efx_nic_t *evv_enp;
+ efx_virtio_vq_state_t evv_state;
+ uint32_t evv_vi_index;
+ efx_virtio_vq_type_t evv_type;
+ uint16_t evv_target_vf;
+};
+
+#endif /* EFSYS_OPT_VIRTIO */
+
#ifdef __cplusplus
}
#endif
diff --git a/drivers/common/sfc_efx/base/efx_virtio.c b/drivers/common/sfc_efx/base/efx_virtio.c
new file mode 100644
index 0000000000..68d157bea6
--- /dev/null
+++ b/drivers/common/sfc_efx/base/efx_virtio.c
@@ -0,0 +1,216 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright(c) 2020-2021 Xilinx, Inc.
+ */
+
+#include "efx.h"
+#include "efx_impl.h"
+
+#if EFSYS_OPT_VIRTIO
+
+#if EFSYS_OPT_RIVERHEAD
+static const efx_virtio_ops_t __efx_virtio_rhead_ops = {
+ rhead_virtio_qstart, /* evo_virtio_qstart */
+ rhead_virtio_qstop, /* evo_virtio_qstop */
+};
+#endif /* EFSYS_OPT_RIVERHEAD */
+
+ __checkReturn efx_rc_t
+efx_virtio_init(
+ __in efx_nic_t *enp)
+{
+ const efx_virtio_ops_t *evop;
+ efx_rc_t rc;
+
+ EFSYS_ASSERT3U(enp->en_magic, ==, EFX_NIC_MAGIC);
+ EFSYS_ASSERT3U(enp->en_mod_flags, &, EFX_MOD_PROBE);
+ EFSYS_ASSERT(!(enp->en_mod_flags & EFX_MOD_VIRTIO));
+
+ switch (enp->en_family) {
+#if EFSYS_OPT_RIVERHEAD
+ case EFX_FAMILY_RIVERHEAD:
+ evop = &__efx_virtio_rhead_ops;
+ break;
+#endif /* EFSYS_OPT_RIVERHEAD */
+
+ default:
+ EFSYS_ASSERT(0);
+ rc = ENOTSUP;
+ goto fail1;
+ }
+
+ enp->en_evop = evop;
+ enp->en_mod_flags |= EFX_MOD_VIRTIO;
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ enp->en_evop = NULL;
+ enp->en_mod_flags &= ~EFX_MOD_VIRTIO;
+
+ return (rc);
+}
+
+ void
+efx_virtio_fini(
+ __in efx_nic_t *enp)
+{
+ EFSYS_ASSERT3U(enp->en_magic, ==, EFX_NIC_MAGIC);
+ EFSYS_ASSERT3U(enp->en_mod_flags, &, EFX_MOD_PROBE);
+ EFSYS_ASSERT3U(enp->en_mod_flags, &, EFX_MOD_VIRTIO);
+
+ enp->en_evop = NULL;
+ enp->en_mod_flags &= ~EFX_MOD_VIRTIO;
+}
+
+ __checkReturn efx_rc_t
+efx_virtio_qcreate(
+ __in efx_nic_t *enp,
+ __deref_out efx_virtio_vq_t **evvpp)
+{
+ const efx_virtio_ops_t *evop = enp->en_evop;
+ efx_virtio_vq_t *evvp;
+ efx_rc_t rc;
+
+ EFSYS_ASSERT3U(enp->en_magic, ==, EFX_NIC_MAGIC);
+ EFSYS_ASSERT3U(enp->en_mod_flags, &, EFX_MOD_VIRTIO);
+
+ /* Allocate a virtqueue object */
+ EFSYS_KMEM_ALLOC(enp->en_esip, sizeof (efx_virtio_vq_t), evvp);
+ if (evvp == NULL) {
+ rc = ENOMEM;
+ goto fail1;
+ }
+
+ evvp->evv_magic = EFX_VQ_MAGIC;
+ evvp->evv_enp = enp;
+ evvp->evv_state = EFX_VIRTIO_VQ_STATE_INITIALIZED;
+
+ *evvpp = evvp;
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+efx_virtio_qstart(
+ __in efx_virtio_vq_t *evvp,
+ __in efx_virtio_vq_cfg_t *evvcp,
+ __in_opt efx_virtio_vq_dyncfg_t *evvdp)
+{
+ const efx_virtio_ops_t *evop;
+ efx_rc_t rc;
+
+ if ((evvcp == NULL) || (evvp == NULL)) {
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ if (evvp->evv_state != EFX_VIRTIO_VQ_STATE_INITIALIZED) {
+ rc = EINVAL;
+ goto fail2;
+ }
+
+ evop = evvp->evv_enp->en_evop;
+ if (evop == NULL) {
+ rc = ENOTSUP;
+ goto fail3;
+ }
+
+ if ((rc = evop->evo_virtio_qstart(evvp, evvcp, evvdp)) != 0)
+ goto fail4;
+
+ evvp->evv_type = evvcp->evvc_type;
+ evvp->evv_target_vf = evvcp->evvc_target_vf;
+ evvp->evv_state = EFX_VIRTIO_VQ_STATE_STARTED;
+
+ return (0);
+
+fail4:
+ EFSYS_PROBE(fail4);
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+efx_virtio_qstop(
+ __in efx_virtio_vq_t *evvp,
+ __out_opt efx_virtio_vq_dyncfg_t *evvdp)
+{
+ efx_nic_t *enp;
+ const efx_virtio_ops_t *evop;
+ efx_rc_t rc;
+
+ if (evvp == NULL) {
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ enp = evvp->evv_enp;
+ evop = enp->en_evop;
+
+ EFSYS_ASSERT3U(evvp->evv_magic, ==, EFX_VQ_MAGIC);
+ EFSYS_ASSERT3U(enp->en_magic, ==, EFX_NIC_MAGIC);
+ EFSYS_ASSERT3U(enp->en_mod_flags, &, EFX_MOD_VIRTIO);
+
+ if (evop == NULL) {
+ rc = ENOTSUP;
+ goto fail2;
+ }
+
+ if (evvp->evv_state != EFX_VIRTIO_VQ_STATE_STARTED) {
+ rc = EINVAL;
+ goto fail3;
+ }
+
+ if ((rc = evop->evo_virtio_qstop(evvp, evvdp)) != 0)
+ goto fail4;
+
+ evvp->evv_state = EFX_VIRTIO_VQ_STATE_INITIALIZED;
+
+ return 0;
+
+fail4:
+ EFSYS_PROBE(fail4);
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ void
+efx_virtio_qdestroy(
+ __in efx_virtio_vq_t *evvp)
+{
+ efx_nic_t *enp;
+
+ if (evvp == NULL)
+ return;
+
+ enp = evvp->evv_enp;
+
+ EFSYS_ASSERT3U(enp->en_magic, ==, EFX_NIC_MAGIC);
+
+ if (evvp->evv_state == EFX_VIRTIO_VQ_STATE_INITIALIZED) {
+ /* Free the virtqueue object */
+ EFSYS_KMEM_FREE(enp->en_esip, sizeof (efx_virtio_vq_t), evvp);
+ }
+}
+
+#endif /* EFSYS_OPT_VIRTIO */
diff --git a/drivers/common/sfc_efx/base/meson.build b/drivers/common/sfc_efx/base/meson.build
index f995eacac2..1a39418c65 100644
--- a/drivers/common/sfc_efx/base/meson.build
+++ b/drivers/common/sfc_efx/base/meson.build
@@ -29,6 +29,7 @@ sources = [
'efx_tunnel.c',
'efx_tx.c',
'efx_vpd.c',
+ 'efx_virtio.c',
'mcdi_mon.c',
'siena_mac.c',
'siena_mcdi.c',
@@ -61,6 +62,7 @@ sources = [
'rhead_rx.c',
'rhead_tunnel.c',
'rhead_tx.c',
+ 'rhead_virtio.c',
]
extra_flags = [
diff --git a/drivers/common/sfc_efx/base/rhead_impl.h b/drivers/common/sfc_efx/base/rhead_impl.h
index 50262b16a8..a15ac52a58 100644
--- a/drivers/common/sfc_efx/base/rhead_impl.h
+++ b/drivers/common/sfc_efx/base/rhead_impl.h
@@ -477,6 +477,23 @@ rhead_nic_xilinx_cap_tbl_read_ef100_locator(
__in efsys_dma_addr_t offset,
__out efx_bar_region_t *ebrp);
+#if EFSYS_OPT_VIRTIO
+
+LIBEFX_INTERNAL
+extern __checkReturn efx_rc_t
+rhead_virtio_qstart(
+ __in efx_virtio_vq_t *evvp,
+ __in efx_virtio_vq_cfg_t *evvcp,
+ __in_opt efx_virtio_vq_dyncfg_t *evvdp);
+
+LIBEFX_INTERNAL
+extern __checkReturn efx_rc_t
+rhead_virtio_qstop(
+ __in efx_virtio_vq_t *evvp,
+ __out_opt efx_virtio_vq_dyncfg_t *evvdp);
+
+#endif /* EFSYS_OPT_VIRTIO */
+
#ifdef __cplusplus
}
#endif
diff --git a/drivers/common/sfc_efx/base/rhead_virtio.c b/drivers/common/sfc_efx/base/rhead_virtio.c
new file mode 100644
index 0000000000..ab83b24a45
--- /dev/null
+++ b/drivers/common/sfc_efx/base/rhead_virtio.c
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright(c) 2020-2021 Xilinx, Inc.
+ */
+
+#include "efx.h"
+#include "efx_impl.h"
+
+#if EFSYS_OPT_RIVERHEAD && EFSYS_OPT_VIRTIO
+
+/*
+ * Get function-local index of the associated VI from the
+ * virtqueue number queue 0 is reserved for MCDI
+ */
+#define EFX_VIRTIO_GET_VI_INDEX(vq_num) (((vq_num) / 2) + 1)
+
+ __checkReturn efx_rc_t
+rhead_virtio_qstart(
+ __in efx_virtio_vq_t *evvp,
+ __in efx_virtio_vq_cfg_t *evvcp,
+ __in_opt efx_virtio_vq_dyncfg_t *evvdp)
+
+{
+ efx_nic_t *enp = evvp->evv_enp;
+ efx_mcdi_req_t req;
+ uint32_t vi_index;
+ EFX_MCDI_DECLARE_BUF(payload, MC_CMD_VIRTIO_INIT_QUEUE_REQ_LEN,
+ MC_CMD_VIRTIO_INIT_QUEUE_RESP_LEN);
+ efx_rc_t rc;
+
+ EFX_STATIC_ASSERT(EFX_VIRTIO_VQ_TYPE_NET_RXQ ==
+ MC_CMD_VIRTIO_INIT_QUEUE_REQ_NET_RXQ);
+ EFX_STATIC_ASSERT(EFX_VIRTIO_VQ_TYPE_NET_TXQ ==
+ MC_CMD_VIRTIO_INIT_QUEUE_REQ_NET_TXQ);
+ EFX_STATIC_ASSERT(EFX_VIRTIO_VQ_TYPE_BLOCK ==
+ MC_CMD_VIRTIO_INIT_QUEUE_REQ_BLOCK);
+
+ if (evvcp->evvc_type >= EFX_VIRTIO_VQ_NTYPES) {
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ /* virtqueue size must be power of 2 */
+ if ((!ISP2(evvcp->evvc_vq_size)) ||
+ (evvcp->evvc_vq_size > EFX_VIRTIO_MAX_VQ_SIZE)) {
+ rc = EINVAL;
+ goto fail2;
+ }
+
+ if (evvdp != NULL) {
+ if ((evvdp->evvd_vq_cidx > evvcp->evvc_vq_size) ||
+ (evvdp->evvd_vq_pidx > evvcp->evvc_vq_size)) {
+ rc = EINVAL;
+ goto fail3;
+ }
+ }
+
+ req.emr_cmd = MC_CMD_VIRTIO_INIT_QUEUE;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_VIRTIO_INIT_QUEUE_REQ_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_VIRTIO_INIT_QUEUE_RESP_LEN;
+
+ MCDI_IN_SET_BYTE(req, VIRTIO_INIT_QUEUE_REQ_QUEUE_TYPE,
+ evvcp->evvc_type);
+ MCDI_IN_SET_WORD(req, VIRTIO_INIT_QUEUE_REQ_TARGET_VF,
+ evvcp->evvc_target_vf);
+
+ vi_index = EFX_VIRTIO_GET_VI_INDEX(evvcp->evvc_vq_num);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_INSTANCE, vi_index);
+
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_SIZE,
+ evvcp->evvc_vq_size);
+
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_DESC_TBL_ADDR_LO,
+ evvcp->evvc_desc_tbl_addr & 0xFFFFFFFF);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_DESC_TBL_ADDR_HI,
+ evvcp->evvc_desc_tbl_addr >> 32);
+
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_AVAIL_RING_ADDR_LO,
+ evvcp->evvc_avail_ring_addr & 0xFFFFFFFF);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_AVAIL_RING_ADDR_HI,
+ evvcp->evvc_avail_ring_addr >> 32);
+
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_USED_RING_ADDR_LO,
+ evvcp->evvc_used_ring_addr & 0xFFFFFFFF);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_USED_RING_ADDR_HI,
+ evvcp->evvc_used_ring_addr >> 32);
+
+ if (evvcp->evvc_use_pasid) {
+ MCDI_IN_POPULATE_DWORD_1(req, VIRTIO_INIT_QUEUE_REQ_FLAGS,
+ VIRTIO_INIT_QUEUE_REQ_USE_PASID, 1);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_PASID,
+ evvcp->evvc_pas_id);
+ }
+
+ MCDI_IN_SET_WORD(req, VIRTIO_INIT_QUEUE_REQ_MSIX_VECTOR,
+ evvcp->evvc_msix_vector);
+
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_FEATURES_LO,
+ evvcp->evcc_features & 0xFFFFFFFF);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_FEATURES_HI,
+ evvcp->evcc_features >> 32);
+
+ if (evvdp != NULL) {
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_INITIAL_PIDX,
+ evvdp->evvd_vq_pidx);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_INITIAL_CIDX,
+ evvdp->evvd_vq_cidx);
+ }
+
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_MPORT_SELECTOR,
+ MAE_MPORT_SELECTOR_ASSIGNED);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail4;
+ }
+
+ evvp->evv_vi_index = vi_index;
+
+ return (0);
+
+fail4:
+ EFSYS_PROBE(fail4);
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+rhead_virtio_qstop(
+ __in efx_virtio_vq_t *evvp,
+ __out_opt efx_virtio_vq_dyncfg_t *evvdp)
+{
+ efx_mcdi_req_t req;
+ efx_nic_t *enp = evvp->evv_enp;
+ EFX_MCDI_DECLARE_BUF(payload, MC_CMD_VIRTIO_FINI_QUEUE_REQ_LEN,
+ MC_CMD_VIRTIO_FINI_QUEUE_RESP_LEN);
+ efx_rc_t rc;
+
+ req.emr_cmd = MC_CMD_VIRTIO_FINI_QUEUE;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_VIRTIO_FINI_QUEUE_REQ_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_VIRTIO_FINI_QUEUE_RESP_LEN;
+
+ MCDI_IN_SET_BYTE(req, VIRTIO_FINI_QUEUE_REQ_QUEUE_TYPE, evvp->evv_type);
+ MCDI_IN_SET_WORD(req, VIRTIO_INIT_QUEUE_REQ_TARGET_VF,
+ evvp->evv_target_vf);
+ MCDI_IN_SET_DWORD(req, VIRTIO_INIT_QUEUE_REQ_INSTANCE,
+ evvp->evv_vi_index);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_VIRTIO_FINI_QUEUE_RESP_LEN) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+
+ if (evvdp != NULL) {
+ evvdp->evvd_vq_pidx =
+ MCDI_OUT_DWORD(req, VIRTIO_FINI_QUEUE_RESP_FINAL_PIDX);
+ evvdp->evvd_vq_cidx =
+ MCDI_OUT_DWORD(req, VIRTIO_FINI_QUEUE_RESP_FINAL_CIDX);
+ }
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+#endif /* EFSYS_OPT_RIVERHEAD && EFSYS_OPT_VIRTIO */
diff --git a/drivers/common/sfc_efx/efsys.h b/drivers/common/sfc_efx/efsys.h
index 663601412e..d133d61b3d 100644
--- a/drivers/common/sfc_efx/efsys.h
+++ b/drivers/common/sfc_efx/efsys.h
@@ -187,6 +187,8 @@ prefetch_read_once(const volatile void *addr)
#define EFSYS_OPT_MAE 1
+#define EFSYS_OPT_VIRTIO 0
+
/* ID */
typedef struct __efsys_identifier_s efsys_identifier_t;
--
2.30.1
next prev parent reply other threads:[~2021-03-16 8:58 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 11:03 [dpdk-dev] [PATCH 0/8] common/sfc_efx: prepare to introduce vDPA driver Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 1/8] common/sfc_efx/base: add base virtio support for vDPA Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 2/8] common/sfc_efx/base: add API to get VirtQ doorbell offset Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 3/8] common/sfc_efx/base: add virtio build dependency Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 4/8] common/sfc_efx/base: add support to get virtio features Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 5/8] common/sfc_efx/base: add support to verify " Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 6/8] common/sfc_efx: add support to get the device class Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 7/8] net/sfc: skip driver probe for incompatible " Andrew Rybchenko
2021-03-11 11:03 ` [dpdk-dev] [PATCH 8/8] drivers: add common driver API to get efx family Andrew Rybchenko
2021-03-14 0:36 ` Ferruh Yigit
2021-03-15 14:01 ` Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 0/8] common/sfc_efx: prepare to introduce vDPA driver Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 1/8] common/sfc_efx/base: add base virtio support for vDPA Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 2/8] common/sfc_efx/base: add API to get VirtQ doorbell offset Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 3/8] common/sfc_efx/base: add virtio build dependency Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 4/8] common/sfc_efx/base: add support to get virtio features Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 5/8] common/sfc_efx/base: add support to verify " Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 6/8] common/sfc_efx: add support to get the device class Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 7/8] net/sfc: skip driver probe for incompatible " Andrew Rybchenko
2021-03-15 13:58 ` [dpdk-dev] [PATCH v2 8/8] drivers: add common driver API to get efx family Andrew Rybchenko
2021-03-15 15:54 ` [dpdk-dev] [PATCH v2 0/8] common/sfc_efx: prepare to introduce vDPA driver Ferruh Yigit
2021-03-16 7:25 ` Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 " Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 1/8] common/sfc_efx/base: add base virtio support for vDPA Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 2/8] common/sfc_efx/base: add API to get VirtQ doorbell offset Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 3/8] common/sfc_efx/base: add virtio build dependency Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 4/8] common/sfc_efx/base: add support to get virtio features Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 5/8] common/sfc_efx/base: add support to verify " Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 6/8] common/sfc_efx: add support to get the device class Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 7/8] net/sfc: skip driver probe for incompatible " Andrew Rybchenko
2021-03-16 6:15 ` [dpdk-dev] [PATCH v3 8/8] drivers: add common driver API to get efx family Andrew Rybchenko
2021-03-16 8:55 ` [dpdk-dev] [PATCH v3 0/8] common/sfc_efx: prepare to introduce vDPA driver Andrew Rybchenko
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 " Andrew Rybchenko
2021-03-16 8:58 ` Andrew Rybchenko [this message]
2021-03-16 11:30 ` [dpdk-dev] [PATCH v4 1/8] common/sfc_efx/base: add base virtio support for vDPA Ferruh Yigit
2021-03-16 11:47 ` Andrew Rybchenko
2021-03-16 11:58 ` Ferruh Yigit
2021-03-16 12:14 ` Andrew Rybchenko
2021-03-16 12:41 ` Ferruh Yigit
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 2/8] common/sfc_efx/base: add API to get VirtQ doorbell offset Andrew Rybchenko
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 3/8] common/sfc_efx/base: add virtio build dependency Andrew Rybchenko
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 4/8] common/sfc_efx/base: add support to get virtio features Andrew Rybchenko
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 5/8] common/sfc_efx/base: add support to verify " Andrew Rybchenko
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 6/8] common/sfc_efx: add support to get the device class Andrew Rybchenko
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 7/8] net/sfc: skip driver probe for incompatible " Andrew Rybchenko
2021-03-16 8:58 ` [dpdk-dev] [PATCH v4 8/8] drivers: add common driver API to get efx family Andrew Rybchenko
2021-03-16 11:26 ` [dpdk-dev] [PATCH v4 0/8] common/sfc_efx: prepare to introduce vDPA driver Ferruh Yigit
2021-03-16 11:30 ` Andrew Rybchenko
2021-03-16 11:32 ` Ferruh Yigit
2021-03-16 11:34 ` Ferruh Yigit
2021-03-16 11:46 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316085832.942481-2-andrew.rybchenko@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=vijays@solarflare.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).