From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Cc: Gaetan Rivet <grive@u256.net>
Subject: [dpdk-dev] [PATCH 1/2] pci: rename catch-all ID
Date: Thu, 1 Apr 2021 00:34:22 +0200 [thread overview]
Message-ID: <20210331223423.2089467-2-thomas@monjalon.net> (raw)
In-Reply-To: <20210331223423.2089467-1-thomas@monjalon.net>
The name of the constant PCI_ANY_ID was missing RTE_ prefix.
It is renamed, and the old name becomes a deprecated alias.
While renaming, the duplicate definitions in rte_bus_pci.h
are removed to keep only those in rte_pci.h.
Note: rte_pci.h is included in rte_bus_pci.h
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
drivers/bus/pci/pci_common.c | 8 ++++----
drivers/bus/pci/rte_bus_pci.h | 12 ++++--------
lib/librte_pci/rte_pci.h | 12 +++++++-----
3 files changed, 15 insertions(+), 17 deletions(-)
diff --git a/drivers/bus/pci/pci_common.c b/drivers/bus/pci/pci_common.c
index 9b8d769287..ee7f966358 100644
--- a/drivers/bus/pci/pci_common.c
+++ b/drivers/bus/pci/pci_common.c
@@ -133,18 +133,18 @@ rte_pci_match(const struct rte_pci_driver *pci_drv,
id_table++) {
/* check if device's identifiers match the driver's ones */
if (id_table->vendor_id != pci_dev->id.vendor_id &&
- id_table->vendor_id != PCI_ANY_ID)
+ id_table->vendor_id != RTE_PCI_ANY_ID)
continue;
if (id_table->device_id != pci_dev->id.device_id &&
- id_table->device_id != PCI_ANY_ID)
+ id_table->device_id != RTE_PCI_ANY_ID)
continue;
if (id_table->subsystem_vendor_id !=
pci_dev->id.subsystem_vendor_id &&
- id_table->subsystem_vendor_id != PCI_ANY_ID)
+ id_table->subsystem_vendor_id != RTE_PCI_ANY_ID)
continue;
if (id_table->subsystem_device_id !=
pci_dev->id.subsystem_device_id &&
- id_table->subsystem_device_id != PCI_ANY_ID)
+ id_table->subsystem_device_id != RTE_PCI_ANY_ID)
continue;
if (id_table->class_id != pci_dev->id.class_id &&
id_table->class_id != RTE_CLASS_ANY_ID)
diff --git a/drivers/bus/pci/rte_bus_pci.h b/drivers/bus/pci/rte_bus_pci.h
index 876abddefb..3a092bc6d5 100644
--- a/drivers/bus/pci/rte_bus_pci.h
+++ b/drivers/bus/pci/rte_bus_pci.h
@@ -91,26 +91,22 @@ struct rte_pci_device {
#define RTE_ETH_DEV_TO_PCI(eth_dev) RTE_DEV_TO_PCI((eth_dev)->device)
-/** Any PCI device identifier (vendor, device, ...) */
-#define PCI_ANY_ID (0xffff)
-#define RTE_CLASS_ANY_ID (0xffffff)
-
#ifdef __cplusplus
/** C++ macro used to help building up tables of device IDs */
#define RTE_PCI_DEVICE(vend, dev) \
RTE_CLASS_ANY_ID, \
(vend), \
(dev), \
- PCI_ANY_ID, \
- PCI_ANY_ID
+ RTE_PCI_ANY_ID, \
+ RTE_PCI_ANY_ID
#else
/** Macro used to help building up tables of device IDs */
#define RTE_PCI_DEVICE(vend, dev) \
.class_id = RTE_CLASS_ANY_ID, \
.vendor_id = (vend), \
.device_id = (dev), \
- .subsystem_vendor_id = PCI_ANY_ID, \
- .subsystem_device_id = PCI_ANY_ID
+ .subsystem_vendor_id = RTE_PCI_ANY_ID, \
+ .subsystem_device_id = RTE_PCI_ANY_ID
#endif
/**
diff --git a/lib/librte_pci/rte_pci.h b/lib/librte_pci/rte_pci.h
index f89c7dbbea..ed3196a368 100644
--- a/lib/librte_pci/rte_pci.h
+++ b/lib/librte_pci/rte_pci.h
@@ -78,10 +78,10 @@ extern "C" {
*/
struct rte_pci_id {
uint32_t class_id; /**< Class ID or RTE_CLASS_ANY_ID. */
- uint16_t vendor_id; /**< Vendor ID or PCI_ANY_ID. */
- uint16_t device_id; /**< Device ID or PCI_ANY_ID. */
- uint16_t subsystem_vendor_id; /**< Subsystem vendor ID or PCI_ANY_ID. */
- uint16_t subsystem_device_id; /**< Subsystem device ID or PCI_ANY_ID. */
+ uint16_t vendor_id; /**< Vendor ID or RTE_PCI_ANY_ID. */
+ uint16_t device_id; /**< Device ID or RTE_PCI_ANY_ID. */
+ uint16_t subsystem_vendor_id; /**< Subsystem vendor ID or RTE_PCI_ANY_ID. */
+ uint16_t subsystem_device_id; /**< Subsystem device ID or RTE_PCI_ANY_ID. */
};
/**
@@ -95,7 +95,9 @@ struct rte_pci_addr {
};
/** Any PCI device identifier (vendor, device, ...) */
-#define PCI_ANY_ID (0xffff)
+#define RTE_PCI_ANY_ID (0xffff)
+/** @deprecated Replaced with RTE_PCI_ANY_ID */
+#define PCI_ANY_ID RTE_PCI_ANY_ID
#define RTE_CLASS_ANY_ID (0xffffff)
/**
--
2.30.1
next prev parent reply other threads:[~2021-03-31 22:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 22:34 [dpdk-dev] [PATCH 0/2] pci: add rte prefix Thomas Monjalon
2021-03-31 22:34 ` Thomas Monjalon [this message]
2021-04-01 7:58 ` [dpdk-dev] [PATCH 1/2] pci: rename catch-all ID David Marchand
2021-04-01 8:15 ` Thomas Monjalon
2021-04-05 10:42 ` Parav Pandit
2021-03-31 22:34 ` [dpdk-dev] [PATCH 2/2] bus/pci: rename probe/remove operation types Thomas Monjalon
2021-04-05 9:15 ` [dpdk-dev] [PATCH v2 0/2] pci: add rte prefix Thomas Monjalon
2021-04-05 9:15 ` [dpdk-dev] [PATCH v2 1/2] pci: rename catch-all ID Thomas Monjalon
2021-04-06 6:23 ` Xueming(Steven) Li
2021-04-06 9:33 ` Thomas Monjalon
2021-04-05 9:15 ` [dpdk-dev] [PATCH v2 2/2] bus/pci: rename probe/remove operation types Thomas Monjalon
2021-04-06 6:32 ` Xueming(Steven) Li
2021-04-06 9:38 ` Thomas Monjalon
2021-04-06 10:51 ` Xueming(Steven) Li
2021-04-06 8:55 ` [dpdk-dev] [PATCH v2 0/2] pci: add rte prefix David Marchand
2021-04-06 10:28 ` [dpdk-dev] [PATCH v3 " Thomas Monjalon
2021-04-06 10:28 ` [dpdk-dev] [PATCH v3 1/2] pci: rename catch-all ID Thomas Monjalon
2021-04-06 10:28 ` [dpdk-dev] [PATCH v3 2/2] bus/pci: rename probe/remove operation types Thomas Monjalon
2021-04-06 13:04 ` [dpdk-dev] [PATCH v3 0/2] pci: add rte prefix Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210331223423.2089467-2-thomas@monjalon.net \
--to=thomas@monjalon.net \
--cc=dev@dpdk.org \
--cc=grive@u256.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).