From: Aman Kumar <aman.kumar@vvdntech.in>
To: dev@dpdk.org
Cc: maxime.coquelin@redhat.com, david.marchand@redhat.com,
aman.kumar@vvdntech.in
Subject: [RFC PATCH 11/29] net/qdma: add configure close and reset ethdev ops
Date: Wed, 6 Jul 2022 13:22:01 +0530 [thread overview]
Message-ID: <20220706075219.517046-12-aman.kumar@vvdntech.in> (raw)
In-Reply-To: <20220706075219.517046-1-aman.kumar@vvdntech.in>
add routines for below ethdev ops:
1. dev_configure
2. dev_reset
3. dev_close
Signed-off-by: Aman Kumar <aman.kumar@vvdntech.in>
---
drivers/net/qdma/qdma.h | 11 +-
drivers/net/qdma/qdma_devops.c | 292 ++++++++++++++++++++++++++++++++-
drivers/net/qdma/qdma_devops.h | 42 +++++
drivers/net/qdma/qdma_ethdev.c | 4 +-
4 files changed, 339 insertions(+), 10 deletions(-)
diff --git a/drivers/net/qdma/qdma.h b/drivers/net/qdma/qdma.h
index f4155380f9..7314af71d7 100644
--- a/drivers/net/qdma/qdma.h
+++ b/drivers/net/qdma/qdma.h
@@ -28,9 +28,16 @@
#define DEFAULT_QUEUE_BASE (0)
+#define QDMA_MAX_BURST_SIZE (128)
+#define QDMA_MIN_RXBUFF_SIZE (256)
+
#define DEFAULT_TIMER_CNT_TRIG_MODE_TIMER (5)
#define DEFAULT_TIMER_CNT_TRIG_MODE_COUNT_TIMER (30)
+#define WB_TIMEOUT (100000)
+#define RESET_TIMEOUT (60000)
+#define SHUTDOWN_TIMEOUT (60000)
+
/* Completion Context config */
#define CMPT_DEFAULT_COLOR_BIT (1)
#define CMPT_CNTXT_DESC_SIZE_8B (0)
@@ -121,8 +128,6 @@ struct qdma_rx_queue {
uint32_t queue_id; /* RX queue index. */
uint64_t mbuf_initializer; /* value to init mbufs */
- struct qdma_pkt_stats stats;
-
uint16_t port_id; /* Device port identifier. */
uint8_t status:1;
uint8_t err:1;
@@ -167,6 +172,7 @@ struct qdma_tx_queue {
uint8_t tx_deferred_start:1;
uint8_t en_bypass:1;
uint8_t status:1;
+ enum rte_pmd_qdma_bypass_desc_len bypass_desc_sz:7;
uint16_t port_id; /* Device port identifier. */
uint8_t func_id; /* RX queue index. */
int8_t ringszidx;
@@ -238,6 +244,7 @@ struct qdma_pci_dev {
struct queue_info *q_info;
uint8_t init_q_range;
+ void **cmpt_queues;
/* Pointer to QDMA access layer function pointers */
struct qdma_hw_access *hw_access;
diff --git a/drivers/net/qdma/qdma_devops.c b/drivers/net/qdma/qdma_devops.c
index cf3ef6de34..2dd76e82c3 100644
--- a/drivers/net/qdma/qdma_devops.c
+++ b/drivers/net/qdma/qdma_devops.c
@@ -26,6 +26,25 @@
#include "qdma_platform.h"
#include "qdma_devops.h"
+static int qdma_pf_fmap_prog(struct rte_eth_dev *dev)
+{
+ struct qdma_pci_dev *qdma_dev = dev->data->dev_private;
+ struct qdma_fmap_cfg fmap_cfg;
+ int ret = 0;
+
+ memset(&fmap_cfg, 0, sizeof(struct qdma_fmap_cfg));
+
+ /* FMAP configuration */
+ fmap_cfg.qbase = qdma_dev->queue_base;
+ fmap_cfg.qmax = qdma_dev->qsets_en;
+ ret = qdma_dev->hw_access->qdma_fmap_conf(dev,
+ qdma_dev->func_id, &fmap_cfg, QDMA_HW_ACCESS_WRITE);
+ if (ret < 0)
+ return qdma_dev->hw_access->qdma_get_error_code(ret);
+
+ return ret;
+}
+
/**
* DPDK callback to configure a RX queue.
*
@@ -159,7 +178,7 @@ int qdma_dev_infos_get(struct rte_eth_dev *dev,
dev_info->max_rx_queues = qdma_dev->dev_cap.num_qs;
dev_info->max_tx_queues = qdma_dev->dev_cap.num_qs;
- dev_info->min_rx_bufsize = 256;
+ dev_info->min_rx_bufsize = QDMA_MIN_RXBUFF_SIZE;
dev_info->max_rx_pktlen = DMA_BRAM_SIZE;
dev_info->max_mac_addrs = 1;
@@ -192,7 +211,110 @@ int qdma_dev_stop(struct rte_eth_dev *dev)
*/
int qdma_dev_close(struct rte_eth_dev *dev)
{
- (void)dev;
+ struct qdma_pci_dev *qdma_dev = dev->data->dev_private;
+ struct qdma_tx_queue *txq;
+ struct qdma_rx_queue *rxq;
+ struct qdma_cmpt_queue *cmptq;
+ uint32_t qid;
+ struct qdma_fmap_cfg fmap_cfg;
+ int ret = 0;
+
+ PMD_DRV_LOG(INFO, "PF-%d(DEVFN) DEV Close\n", qdma_dev->func_id);
+
+ if (dev->data->dev_started)
+ qdma_dev_stop(dev);
+
+ memset(&fmap_cfg, 0, sizeof(struct qdma_fmap_cfg));
+ qdma_dev->hw_access->qdma_fmap_conf(dev,
+ qdma_dev->func_id, &fmap_cfg, QDMA_HW_ACCESS_CLEAR);
+
+ /* iterate over rx queues */
+ for (qid = 0; qid < dev->data->nb_rx_queues; ++qid) {
+ rxq = dev->data->rx_queues[qid];
+ if (rxq) {
+ PMD_DRV_LOG(INFO, "Remove C2H queue: %d", qid);
+
+ if (rxq->sw_ring)
+ rte_free(rxq->sw_ring);
+ if (rxq->st_mode) { /* if ST-mode */
+ if (rxq->rx_cmpt_mz)
+ rte_memzone_free(rxq->rx_cmpt_mz);
+ }
+
+ qdma_dev_decrement_active_queue(qdma_dev->dma_device_index,
+ qdma_dev->func_id,
+ QDMA_DEV_Q_TYPE_C2H);
+
+ if (rxq->st_mode)
+ qdma_dev_decrement_active_queue(qdma_dev->dma_device_index,
+ qdma_dev->func_id,
+ QDMA_DEV_Q_TYPE_CMPT);
+
+ if (rxq->rx_mz)
+ rte_memzone_free(rxq->rx_mz);
+ rte_free(rxq);
+ PMD_DRV_LOG(INFO, "C2H queue %d removed", qid);
+ }
+ }
+
+ /* iterate over tx queues */
+ for (qid = 0; qid < dev->data->nb_tx_queues; ++qid) {
+ txq = dev->data->tx_queues[qid];
+ if (txq) {
+ PMD_DRV_LOG(INFO, "Remove H2C queue: %d", qid);
+
+ if (txq->sw_ring)
+ rte_free(txq->sw_ring);
+ if (txq->tx_mz)
+ rte_memzone_free(txq->tx_mz);
+ rte_free(txq);
+ PMD_DRV_LOG(INFO, "H2C queue %d removed", qid);
+
+ qdma_dev_decrement_active_queue(qdma_dev->dma_device_index,
+ qdma_dev->func_id,
+ QDMA_DEV_Q_TYPE_H2C);
+ }
+ }
+ if (qdma_dev->dev_cap.mm_cmpt_en) {
+ /* iterate over cmpt queues */
+ for (qid = 0; qid < qdma_dev->qsets_en; ++qid) {
+ cmptq = qdma_dev->cmpt_queues[qid];
+ if (cmptq != NULL) {
+ PMD_DRV_LOG(INFO, "PF-%d(DEVFN) Remove CMPT queue: %d",
+ qdma_dev->func_id, qid);
+ if (cmptq->cmpt_mz)
+ rte_memzone_free(cmptq->cmpt_mz);
+ rte_free(cmptq);
+ PMD_DRV_LOG(INFO, "PF-%d(DEVFN) CMPT queue %d removed",
+ qdma_dev->func_id, qid);
+ qdma_dev_decrement_active_queue(qdma_dev->dma_device_index,
+ qdma_dev->func_id,
+ QDMA_DEV_Q_TYPE_CMPT);
+ }
+ }
+
+ if (qdma_dev->cmpt_queues != NULL) {
+ rte_free(qdma_dev->cmpt_queues);
+ qdma_dev->cmpt_queues = NULL;
+ }
+ }
+ qdma_dev->qsets_en = 0;
+ ret = qdma_dev_update(qdma_dev->dma_device_index, qdma_dev->func_id,
+ qdma_dev->qsets_en, (int *)&qdma_dev->queue_base);
+ if (ret != QDMA_SUCCESS) {
+ PMD_DRV_LOG(ERR, "PF-%d(DEVFN) qmax update failed: %d\n",
+ qdma_dev->func_id, ret);
+ return 0;
+ }
+
+ qdma_dev->init_q_range = 0;
+ rte_free(qdma_dev->q_info);
+ qdma_dev->q_info = NULL;
+ qdma_dev->dev_configured = 0;
+
+ /* cancel pending polls */
+ if (qdma_dev->is_master)
+ rte_eal_alarm_cancel(qdma_check_errors, (void *)dev);
return 0;
}
@@ -212,9 +334,61 @@ int qdma_dev_close(struct rte_eth_dev *dev)
*/
int qdma_dev_reset(struct rte_eth_dev *dev)
{
- (void)dev;
-
- return 0;
+ struct qdma_pci_dev *qdma_dev = dev->data->dev_private;
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ uint32_t vf_device_count = 0;
+ uint32_t i = 0;
+ int ret = 0;
+
+ /* Get the number of active VFs for this PF device */
+ vf_device_count = qdma_dev->vf_online_count;
+ qdma_dev->reset_in_progress = 1;
+
+ /* Uninitialze PCI device */
+ ret = qdma_eth_dev_uninit(dev);
+ if (ret != QDMA_SUCCESS) {
+ PMD_DRV_LOG(ERR, "PF-%d(DEVFN) uninitialization failed: %d\n",
+ qdma_dev->func_id, ret);
+ return -1;
+ }
+
+ /* Initialize PCI device */
+ ret = qdma_eth_dev_init(dev);
+ if (ret != QDMA_SUCCESS) {
+ PMD_DRV_LOG(ERR, "PF-%d(DEVFN) initialization failed: %d\n",
+ qdma_dev->func_id, ret);
+ return -1;
+ }
+
+ /* Send "PF_RESET_DONE" mailbox message from PF to all its VFs,
+ * so that VFs can come online again
+ */
+ for (i = 0; i < pci_dev->max_vfs; i++) {
+ if (qdma_dev->vfinfo[i].func_id == QDMA_FUNC_ID_INVALID)
+ continue;
+ }
+
+ /* Start waiting for a maximum of 60 secs to get all its VFs
+ * to come online that were active before PF reset
+ */
+ i = 0;
+ while (i < RESET_TIMEOUT) {
+ if (qdma_dev->vf_online_count == vf_device_count) {
+ PMD_DRV_LOG(INFO,
+ "%s: Reset completed for PF-%d(DEVFN)\n",
+ __func__, qdma_dev->func_id);
+ break;
+ }
+ rte_delay_ms(1);
+ i++;
+ }
+
+ if (i >= RESET_TIMEOUT) {
+ PMD_DRV_LOG(ERR, "%s: Failed reset for PF-%d(DEVFN)\n",
+ __func__, qdma_dev->func_id);
+ }
+
+ return ret;
}
/**
@@ -228,7 +402,113 @@ int qdma_dev_reset(struct rte_eth_dev *dev)
*/
int qdma_dev_configure(struct rte_eth_dev *dev)
{
- (void)dev;
+ struct qdma_pci_dev *qdma_dev = dev->data->dev_private;
+ uint16_t qid = 0;
+ int ret = 0, queue_base = -1;
+ uint8_t stat_id;
+
+ PMD_DRV_LOG(INFO, "Configure the qdma engines\n");
+
+ qdma_dev->qsets_en = RTE_MAX(dev->data->nb_rx_queues,
+ dev->data->nb_tx_queues);
+ if (qdma_dev->qsets_en > qdma_dev->dev_cap.num_qs) {
+ PMD_DRV_LOG(ERR, "PF-%d(DEVFN) Error: Number of Queues to be"
+ " configured are greater than the queues"
+ " supported by the hardware\n",
+ qdma_dev->func_id);
+ qdma_dev->qsets_en = 0;
+ return -1;
+ }
+
+ /* Request queue base from the resource manager */
+ ret = qdma_dev_update(qdma_dev->dma_device_index, qdma_dev->func_id,
+ qdma_dev->qsets_en, &queue_base);
+ if (ret != QDMA_SUCCESS) {
+ PMD_DRV_LOG(ERR, "PF-%d(DEVFN) queue allocation failed: %d\n",
+ qdma_dev->func_id, ret);
+ return -1;
+ }
+
+ ret = qdma_dev_qinfo_get(qdma_dev->dma_device_index, qdma_dev->func_id,
+ (int *)&qdma_dev->queue_base,
+ &qdma_dev->qsets_en);
+ if (ret != QDMA_SUCCESS) {
+ PMD_DRV_LOG(ERR, "%s: Error %d querying qbase\n",
+ __func__, ret);
+ return -1;
+ }
+ PMD_DRV_LOG(INFO, "Bus: 0x%x, PF-%d(DEVFN) queue_base: %d\n",
+ qdma_dev->dma_device_index,
+ qdma_dev->func_id,
+ qdma_dev->queue_base);
+
+ qdma_dev->q_info = rte_zmalloc("qinfo", sizeof(struct queue_info) *
+ (qdma_dev->qsets_en), 0);
+ if (!qdma_dev->q_info) {
+ PMD_DRV_LOG(ERR, "PF-%d(DEVFN) Cannot allocate "
+ "memory for queue info\n", qdma_dev->func_id);
+ return (-ENOMEM);
+ }
+
+ /* Reserve memory for cmptq ring pointers
+ * Max completion queues can be maximum of rx and tx queues.
+ */
+ qdma_dev->cmpt_queues = rte_zmalloc("cmpt_queues",
+ sizeof(qdma_dev->cmpt_queues[0]) *
+ qdma_dev->qsets_en,
+ RTE_CACHE_LINE_SIZE);
+ if (qdma_dev->cmpt_queues == NULL) {
+ PMD_DRV_LOG(ERR, "PF-%d(DEVFN) cmpt ring pointers memory "
+ "allocation failed:\n", qdma_dev->func_id);
+ rte_free(qdma_dev->q_info);
+ qdma_dev->q_info = NULL;
+ return -(ENOMEM);
+ }
+
+ for (qid = 0 ; qid < qdma_dev->qsets_en; qid++) {
+ /* Initialize queue_modes to all 1's ( i.e. Streaming) */
+ qdma_dev->q_info[qid].queue_mode = RTE_PMD_QDMA_STREAMING_MODE;
+
+ /* Disable the cmpt over flow check by default */
+ qdma_dev->q_info[qid].dis_cmpt_ovf_chk = 0;
+
+ qdma_dev->q_info[qid].trigger_mode = qdma_dev->trigger_mode;
+ qdma_dev->q_info[qid].timer_count =
+ qdma_dev->timer_count;
+ }
+
+ for (qid = 0 ; qid < dev->data->nb_rx_queues; qid++) {
+ qdma_dev->q_info[qid].cmpt_desc_sz = qdma_dev->cmpt_desc_len;
+ qdma_dev->q_info[qid].rx_bypass_mode =
+ qdma_dev->c2h_bypass_mode;
+ qdma_dev->q_info[qid].en_prefetch = qdma_dev->en_desc_prefetch;
+ qdma_dev->q_info[qid].immediate_data_state = 0;
+ }
+
+ for (qid = 0 ; qid < dev->data->nb_tx_queues; qid++)
+ qdma_dev->q_info[qid].tx_bypass_mode =
+ qdma_dev->h2c_bypass_mode;
+ for (stat_id = 0, qid = 0;
+ stat_id < RTE_ETHDEV_QUEUE_STAT_CNTRS;
+ stat_id++, qid++) {
+ /* Initialize map with qid same as stat_id */
+ qdma_dev->tx_qid_statid_map[stat_id] =
+ (qid < dev->data->nb_tx_queues) ? qid : -1;
+ qdma_dev->rx_qid_statid_map[stat_id] =
+ (qid < dev->data->nb_rx_queues) ? qid : -1;
+ }
+
+ ret = qdma_pf_fmap_prog(dev);
+ if (ret < 0) {
+ PMD_DRV_LOG(ERR, "FMAP programming failed\n");
+ rte_free(qdma_dev->q_info);
+ qdma_dev->q_info = NULL;
+ rte_free(qdma_dev->cmpt_queues);
+ qdma_dev->cmpt_queues = NULL;
+ return ret;
+ }
+
+ qdma_dev->dev_configured = 1;
return 0;
}
diff --git a/drivers/net/qdma/qdma_devops.h b/drivers/net/qdma/qdma_devops.h
index 240fa6b60c..c0f903f1cf 100644
--- a/drivers/net/qdma/qdma_devops.h
+++ b/drivers/net/qdma/qdma_devops.h
@@ -13,6 +13,29 @@ extern "C" {
/** @defgroup dpdk_devops_func Functions
*/
+/**
+ * DPDK callback to register an Ethernet PCIe device.
+ *
+ * The Following actions are performed by this function:
+ * - Parse and validate device arguments
+ * - Identify PCIe BARs present in the device
+ * - Register device operations
+ * - Enable MM C2H and H2C channels
+ * - Register PCIe device with Queue Resource Manager
+ * - Program the QDMA IP global registers (by 1st PF that was probed)
+ * - Enable HW errors and launch QDMA HW error monitoring thread
+ * (by 1st PF that was probed)
+ * - If VF is enabled, then enable Mailbox interrupt and register
+ * Rx message handling function as interrupt handler
+ *
+ * @param dev Pointer to Ethernet device structure
+ *
+ * @return 0 on success, < 0 on failure
+ * @ingroup dpdk_devops_func
+ *
+ */
+int qdma_eth_dev_init(struct rte_eth_dev *dev);
+
/**
* DPDK callback for Ethernet device configuration.
*
@@ -480,6 +503,25 @@ int qdma_vf_dev_close(struct rte_eth_dev *dev);
*/
int qdma_dev_reset(struct rte_eth_dev *dev);
+/**
+ * DPDK callback to deregister a PCI device.
+ *
+ * The Following actions are performed by this function:
+ * - Flushes out pending actions from the Tx Mailbox List
+ * - Terminate Tx Mailbox thread
+ * - Disable Mailbox interrupt and unregister interrupt handler
+ * - Unregister PCIe device from Queue Resource Manager
+ * - Cancel QDMA HW error monitoring thread if created by this device
+ * - Disable MM C2H and H2C channels
+ *
+ * @param dev Pointer to Ethernet device structure
+ *
+ * @return 0 on success, < 0 on failure
+ * @ingroup dpdk_devops_func
+ *
+ */
+int qdma_eth_dev_uninit(struct rte_eth_dev *dev);
+
#ifdef __cplusplus
}
#endif
diff --git a/drivers/net/qdma/qdma_ethdev.c b/drivers/net/qdma/qdma_ethdev.c
index 79aac4aa60..cc1e8eee71 100644
--- a/drivers/net/qdma/qdma_ethdev.c
+++ b/drivers/net/qdma/qdma_ethdev.c
@@ -333,7 +333,7 @@ static int get_max_pci_bus_num(uint8_t start_bus, uint8_t *end_bus)
* @return
* 0 on success, negative errno value on failure.
*/
-static int qdma_eth_dev_init(struct rte_eth_dev *dev)
+int qdma_eth_dev_init(struct rte_eth_dev *dev)
{
struct qdma_pci_dev *dma_priv;
uint8_t *baseaddr;
@@ -578,7 +578,7 @@ static int qdma_eth_dev_init(struct rte_eth_dev *dev)
* @return
* 0 on success, negative errno value on failure.
*/
-static int qdma_eth_dev_uninit(struct rte_eth_dev *dev)
+int qdma_eth_dev_uninit(struct rte_eth_dev *dev)
{
struct qdma_pci_dev *qdma_dev = dev->data->dev_private;
--
2.36.1
next prev parent reply other threads:[~2022-07-06 7:57 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 7:51 [RFC PATCH 00/29] cover letter for net/qdma PMD Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 01/29] net/qdma: add net PMD template Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 02/29] maintainers: add maintainer for net/qdma PMD Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 03/29] net/meson.build: add support to compile net qdma Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 04/29] net/qdma: add logging support Aman Kumar
2022-07-06 15:27 ` Stephen Hemminger
2022-07-07 2:32 ` Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 05/29] net/qdma: add device init and uninit functions Aman Kumar
2022-07-06 15:35 ` Stephen Hemminger
2022-07-07 2:41 ` Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 06/29] net/qdma: add qdma access library Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 07/29] net/qdma: add supported qdma version Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 08/29] net/qdma: qdma hardware initialization Aman Kumar
2022-07-06 7:51 ` [RFC PATCH 09/29] net/qdma: define device modes and data structure Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 10/29] net/qdma: add net PMD ops template Aman Kumar
2022-07-06 7:52 ` Aman Kumar [this message]
2022-07-06 7:52 ` [RFC PATCH 12/29] net/qdma: add routine for Rx queue initialization Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 13/29] net/qdma: add callback support for Rx queue count Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 14/29] net/qdma: add routine for Tx queue initialization Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 15/29] net/qdma: add queue cleanup PMD ops Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 16/29] net/qdma: add start and stop apis Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 17/29] net/qdma: add Tx burst API Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 18/29] net/qdma: add Tx queue reclaim routine Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 19/29] net/qdma: add callback function for Tx desc status Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 20/29] net/qdma: add Rx burst API Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 21/29] net/qdma: add mailbox communication library Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 22/29] net/qdma: mbox API adaptation in Rx/Tx init Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 23/29] net/qdma: add support for VF interfaces Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 24/29] net/qdma: add Rx/Tx queue setup routine for VF devices Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 25/29] net/qdma: add basic PMD ops for VF Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 26/29] net/qdma: add datapath burst API " Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 27/29] net/qdma: add device specific APIs for export Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 28/29] net/qdma: add additional debug APIs Aman Kumar
2022-07-06 7:52 ` [RFC PATCH 29/29] net/qdma: add stats PMD ops for PF and VF Aman Kumar
2022-07-07 6:57 ` [RFC PATCH 00/29] cover letter for net/qdma PMD Thomas Monjalon
2022-07-07 13:55 ` Aman Kumar
2022-07-07 14:15 ` Thomas Monjalon
2022-07-07 14:19 ` Hemant Agrawal
2022-07-18 18:15 ` aman.kumar
2022-07-19 12:12 ` Thomas Monjalon
2022-07-19 17:22 ` aman.kumar
2023-07-02 23:36 ` Stephen Hemminger
2023-07-03 9:15 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220706075219.517046-12-aman.kumar@vvdntech.in \
--to=aman.kumar@vvdntech.in \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=maxime.coquelin@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).