From: Dariusz Sosnowski <dsosnowski@nvidia.com>
To: Viacheslav Ovsiienko <viacheslavo@nvidia.com>,
Ori Kam <orika@nvidia.com>, Suanming Mou <suanmingm@nvidia.com>,
Matan Azrad <matan@nvidia.com>
Cc: <dev@dpdk.org>, Raslan Darawsheh <rasland@nvidia.com>,
Bing Zhao <bingz@nvidia.com>
Subject: [PATCH v2 05/11] net/mlx5: remove action params from job
Date: Thu, 29 Feb 2024 12:51:50 +0100 [thread overview]
Message-ID: <20240229115157.201671-6-dsosnowski@nvidia.com> (raw)
In-Reply-To: <20240229115157.201671-1-dsosnowski@nvidia.com>
mlx5_hw_q_job struct held references to buffers which contained:
- modify header commands array,
- encap/decap data buffer,
- IPv6 routing data buffer.
These buffers were passed as parameters to HWS layer during rule
creation. They were needed only during the call to HWS layer
when flow operation is enqueues (i.e. mlx5dr_rule_create()).
After operation is enqueued, data stored there can be safely discarded
and it is not required to store it during the whole lifecycle of a job.
This patch removes references to these buffers from mlx5_hw_q_job
and removes relevant allocations to reduce job memory footprint.
Buffers stored per job are replaced with stack allocated ones,
contained in mlx5_flow_hw_action_params struct.
Signed-off-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
---
drivers/net/mlx5/mlx5.h | 3 -
drivers/net/mlx5/mlx5_flow.h | 10 +++
drivers/net/mlx5/mlx5_flow_hw.c | 120 ++++++++++++++------------------
3 files changed, 63 insertions(+), 70 deletions(-)
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index f11a0181b8..42dc312a87 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -401,9 +401,6 @@ struct mlx5_hw_q_job {
const void *action; /* Indirect action attached to the job. */
};
void *user_data; /* Job user data. */
- uint8_t *encap_data; /* Encap data. */
- uint8_t *push_data; /* IPv6 routing push data. */
- struct mlx5_modification_cmd *mhdr_cmd;
struct rte_flow_item *items;
union {
struct {
diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index 02af0a08fa..9ed356e1c2 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -1306,6 +1306,16 @@ typedef int
#define MLX5_MHDR_MAX_CMD ((MLX5_MAX_MODIFY_NUM) * 2 + 1)
+/** Container for flow action data constructed during flow rule creation. */
+struct mlx5_flow_hw_action_params {
+ /** Array of constructed modify header commands. */
+ struct mlx5_modification_cmd mhdr_cmd[MLX5_MHDR_MAX_CMD];
+ /** Constructed encap/decap data buffer. */
+ uint8_t encap_data[MLX5_ENCAP_MAX_LEN];
+ /** Constructed IPv6 routing data buffer. */
+ uint8_t ipv6_push_data[MLX5_PUSH_MAX_LEN];
+};
+
/* rte flow action translate to DR action struct. */
struct mlx5_action_construct_data {
LIST_ENTRY(mlx5_action_construct_data) next;
diff --git a/drivers/net/mlx5/mlx5_flow_hw.c b/drivers/net/mlx5/mlx5_flow_hw.c
index 1fe8f42618..a87fe4d07a 100644
--- a/drivers/net/mlx5/mlx5_flow_hw.c
+++ b/drivers/net/mlx5/mlx5_flow_hw.c
@@ -158,7 +158,7 @@ static int flow_hw_translate_group(struct rte_eth_dev *dev,
struct rte_flow_error *error);
static __rte_always_inline int
flow_hw_set_vlan_vid_construct(struct rte_eth_dev *dev,
- struct mlx5_hw_q_job *job,
+ struct mlx5_modification_cmd *mhdr_cmd,
struct mlx5_action_construct_data *act_data,
const struct mlx5_hw_actions *hw_acts,
const struct rte_flow_action *action);
@@ -2812,7 +2812,7 @@ flow_hw_mhdr_cmd_is_nop(const struct mlx5_modification_cmd *cmd)
* 0 on success, negative value otherwise and rte_errno is set.
*/
static __rte_always_inline int
-flow_hw_modify_field_construct(struct mlx5_hw_q_job *job,
+flow_hw_modify_field_construct(struct mlx5_modification_cmd *mhdr_cmd,
struct mlx5_action_construct_data *act_data,
const struct mlx5_hw_actions *hw_acts,
const struct rte_flow_action *action)
@@ -2871,7 +2871,7 @@ flow_hw_modify_field_construct(struct mlx5_hw_q_job *job,
if (i >= act_data->modify_header.mhdr_cmds_end)
return -1;
- if (flow_hw_mhdr_cmd_is_nop(&job->mhdr_cmd[i])) {
+ if (flow_hw_mhdr_cmd_is_nop(&mhdr_cmd[i])) {
++i;
continue;
}
@@ -2891,7 +2891,7 @@ flow_hw_modify_field_construct(struct mlx5_hw_q_job *job,
mhdr_action->dst.field == RTE_FLOW_FIELD_IPV6_DSCP)
data <<= MLX5_IPV6_HDR_DSCP_SHIFT;
data = (data & mask) >> off_b;
- job->mhdr_cmd[i++].data1 = rte_cpu_to_be_32(data);
+ mhdr_cmd[i++].data1 = rte_cpu_to_be_32(data);
++field;
} while (field->size);
return 0;
@@ -2905,8 +2905,10 @@ flow_hw_modify_field_construct(struct mlx5_hw_q_job *job,
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
- * @param[in] job
- * Pointer to job descriptor.
+ * @param[in] flow
+ * Pointer to flow structure.
+ * @param[in] ap
+ * Pointer to container for temporarily constructed actions' parameters.
* @param[in] hw_acts
* Pointer to translated actions from template.
* @param[in] it_idx
@@ -2923,7 +2925,8 @@ flow_hw_modify_field_construct(struct mlx5_hw_q_job *job,
*/
static __rte_always_inline int
flow_hw_actions_construct(struct rte_eth_dev *dev,
- struct mlx5_hw_q_job *job,
+ struct rte_flow_hw *flow,
+ struct mlx5_flow_hw_action_params *ap,
const struct mlx5_hw_action_template *hw_at,
const uint8_t it_idx,
const struct rte_flow_action actions[],
@@ -2933,7 +2936,7 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_mtr_pool *pool = priv->hws_mpool;
- struct rte_flow_template_table *table = job->flow->table;
+ struct rte_flow_template_table *table = flow->table;
struct mlx5_action_construct_data *act_data;
const struct rte_flow_actions_template *at = hw_at->action_template;
const struct mlx5_hw_actions *hw_acts = &hw_at->acts;
@@ -2945,8 +2948,6 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
const struct rte_flow_action_meter *meter = NULL;
const struct rte_flow_action_age *age = NULL;
const struct rte_flow_action_nat64 *nat64_c = NULL;
- uint8_t *buf = job->encap_data;
- uint8_t *push_buf = job->push_data;
struct rte_flow_attr attr = {
.ingress = 1,
};
@@ -2971,17 +2972,17 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
if (hw_acts->mhdr && hw_acts->mhdr->mhdr_cmds_num > 0 && !hw_acts->mhdr->shared) {
uint16_t pos = hw_acts->mhdr->pos;
- mp_segment = mlx5_multi_pattern_segment_find(table, job->flow->res_idx);
+ mp_segment = mlx5_multi_pattern_segment_find(table, flow->res_idx);
if (!mp_segment || !mp_segment->mhdr_action)
return -1;
rule_acts[pos].action = mp_segment->mhdr_action;
/* offset is relative to DR action */
rule_acts[pos].modify_header.offset =
- job->flow->res_idx - mp_segment->head_index;
+ flow->res_idx - mp_segment->head_index;
rule_acts[pos].modify_header.data =
- (uint8_t *)job->mhdr_cmd;
- rte_memcpy(job->mhdr_cmd, hw_acts->mhdr->mhdr_cmds,
- sizeof(*job->mhdr_cmd) * hw_acts->mhdr->mhdr_cmds_num);
+ (uint8_t *)ap->mhdr_cmd;
+ rte_memcpy(ap->mhdr_cmd, hw_acts->mhdr->mhdr_cmds,
+ sizeof(*ap->mhdr_cmd) * hw_acts->mhdr->mhdr_cmds_num);
}
LIST_FOREACH(act_data, &hw_acts->act_list, next) {
uint32_t jump_group;
@@ -3014,7 +3015,7 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
case RTE_FLOW_ACTION_TYPE_INDIRECT:
if (flow_hw_shared_action_construct
(dev, queue, action, table, it_idx,
- at->action_flags, job->flow,
+ at->action_flags, flow,
&rule_acts[act_data->action_dst]))
return -1;
break;
@@ -3039,8 +3040,8 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
return -1;
rule_acts[act_data->action_dst].action =
(!!attr.group) ? jump->hws_action : jump->root_action;
- job->flow->jump = jump;
- job->flow->fate_type = MLX5_FLOW_FATE_JUMP;
+ flow->jump = jump;
+ flow->fate_type = MLX5_FLOW_FATE_JUMP;
break;
case RTE_FLOW_ACTION_TYPE_RSS:
case RTE_FLOW_ACTION_TYPE_QUEUE:
@@ -3050,8 +3051,8 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
if (!hrxq)
return -1;
rule_acts[act_data->action_dst].action = hrxq->action;
- job->flow->hrxq = hrxq;
- job->flow->fate_type = MLX5_FLOW_FATE_QUEUE;
+ flow->hrxq = hrxq;
+ flow->fate_type = MLX5_FLOW_FATE_QUEUE;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_RSS:
item_flags = table->its[it_idx]->item_flags;
@@ -3063,38 +3064,37 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
enc_item = ((const struct rte_flow_action_vxlan_encap *)
action->conf)->definition;
- if (flow_dv_convert_encap_data(enc_item, buf, &encap_len, NULL))
+ if (flow_dv_convert_encap_data(enc_item, ap->encap_data, &encap_len, NULL))
return -1;
break;
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
enc_item = ((const struct rte_flow_action_nvgre_encap *)
action->conf)->definition;
- if (flow_dv_convert_encap_data(enc_item, buf, &encap_len, NULL))
+ if (flow_dv_convert_encap_data(enc_item, ap->encap_data, &encap_len, NULL))
return -1;
break;
case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
raw_encap_data =
(const struct rte_flow_action_raw_encap *)
action->conf;
- rte_memcpy((void *)buf, raw_encap_data->data, act_data->encap.len);
- MLX5_ASSERT(raw_encap_data->size ==
- act_data->encap.len);
+ rte_memcpy(ap->encap_data, raw_encap_data->data, act_data->encap.len);
+ MLX5_ASSERT(raw_encap_data->size == act_data->encap.len);
break;
case RTE_FLOW_ACTION_TYPE_IPV6_EXT_PUSH:
ipv6_push =
(const struct rte_flow_action_ipv6_ext_push *)action->conf;
- rte_memcpy((void *)push_buf, ipv6_push->data,
+ rte_memcpy(ap->ipv6_push_data, ipv6_push->data,
act_data->ipv6_ext.len);
MLX5_ASSERT(ipv6_push->size == act_data->ipv6_ext.len);
break;
case RTE_FLOW_ACTION_TYPE_MODIFY_FIELD:
if (action->type == RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID)
- ret = flow_hw_set_vlan_vid_construct(dev, job,
+ ret = flow_hw_set_vlan_vid_construct(dev, ap->mhdr_cmd,
act_data,
hw_acts,
action);
else
- ret = flow_hw_modify_field_construct(job,
+ ret = flow_hw_modify_field_construct(ap->mhdr_cmd,
act_data,
hw_acts,
action);
@@ -3130,8 +3130,8 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
rule_acts[act_data->action_dst + 1].action =
(!!attr.group) ? jump->hws_action :
jump->root_action;
- job->flow->jump = jump;
- job->flow->fate_type = MLX5_FLOW_FATE_JUMP;
+ flow->jump = jump;
+ flow->fate_type = MLX5_FLOW_FATE_JUMP;
if (mlx5_aso_mtr_wait(priv->sh, MLX5_HW_INV_QUEUE, aso_mtr))
return -1;
break;
@@ -3145,11 +3145,11 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
*/
age_idx = mlx5_hws_age_action_create(priv, queue, 0,
age,
- job->flow->res_idx,
+ flow->res_idx,
error);
if (age_idx == 0)
return -rte_errno;
- job->flow->age_idx = age_idx;
+ flow->age_idx = age_idx;
if (at->action_flags & MLX5_FLOW_ACTION_INDIRECT_COUNT)
/*
* When AGE uses indirect counter, no need to
@@ -3172,7 +3172,7 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
);
if (ret != 0)
return ret;
- job->flow->cnt_id = cnt_id;
+ flow->cnt_id = cnt_id;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_COUNT:
ret = mlx5_hws_cnt_pool_get_action_offset
@@ -3183,7 +3183,7 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
);
if (ret != 0)
return ret;
- job->flow->cnt_id = act_data->shared_counter.id;
+ flow->cnt_id = act_data->shared_counter.id;
break;
case RTE_FLOW_ACTION_TYPE_CONNTRACK:
ct_idx = MLX5_INDIRECT_ACTION_IDX_GET(action->conf);
@@ -3210,8 +3210,7 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
*/
ret = flow_hw_meter_mark_compile(dev,
act_data->action_dst, action,
- rule_acts, &job->flow->mtr_id,
- MLX5_HW_INV_QUEUE, error);
+ rule_acts, &flow->mtr_id, MLX5_HW_INV_QUEUE, error);
if (ret != 0)
return ret;
break;
@@ -3226,9 +3225,9 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
}
if (at->action_flags & MLX5_FLOW_ACTION_INDIRECT_COUNT) {
if (at->action_flags & MLX5_FLOW_ACTION_INDIRECT_AGE) {
- age_idx = job->flow->age_idx & MLX5_HWS_AGE_IDX_MASK;
+ age_idx = flow->age_idx & MLX5_HWS_AGE_IDX_MASK;
if (mlx5_hws_cnt_age_get(priv->hws_cpool,
- job->flow->cnt_id) != age_idx)
+ flow->cnt_id) != age_idx)
/*
* This is first use of this indirect counter
* for this indirect AGE, need to increase the
@@ -3240,7 +3239,7 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
* Update this indirect counter the indirect/direct AGE in which
* using it.
*/
- mlx5_hws_cnt_age_set(priv->hws_cpool, job->flow->cnt_id,
+ mlx5_hws_cnt_age_set(priv->hws_cpool, flow->cnt_id,
age_idx);
}
if (hw_acts->encap_decap && !hw_acts->encap_decap->shared) {
@@ -3250,21 +3249,21 @@ flow_hw_actions_construct(struct rte_eth_dev *dev,
if (ix < 0)
return -1;
if (!mp_segment)
- mp_segment = mlx5_multi_pattern_segment_find(table, job->flow->res_idx);
+ mp_segment = mlx5_multi_pattern_segment_find(table, flow->res_idx);
if (!mp_segment || !mp_segment->reformat_action[ix])
return -1;
ra->action = mp_segment->reformat_action[ix];
/* reformat offset is relative to selected DR action */
- ra->reformat.offset = job->flow->res_idx - mp_segment->head_index;
- ra->reformat.data = buf;
+ ra->reformat.offset = flow->res_idx - mp_segment->head_index;
+ ra->reformat.data = ap->encap_data;
}
if (hw_acts->push_remove && !hw_acts->push_remove->shared) {
rule_acts[hw_acts->push_remove_pos].ipv6_ext.offset =
- job->flow->res_idx - 1;
- rule_acts[hw_acts->push_remove_pos].ipv6_ext.header = push_buf;
+ flow->res_idx - 1;
+ rule_acts[hw_acts->push_remove_pos].ipv6_ext.header = ap->ipv6_push_data;
}
if (mlx5_hws_cnt_id_valid(hw_acts->cnt_id))
- job->flow->cnt_id = hw_acts->cnt_id;
+ flow->cnt_id = hw_acts->cnt_id;
return 0;
}
@@ -3364,6 +3363,7 @@ flow_hw_async_flow_create(struct rte_eth_dev *dev,
.burst = attr->postpone,
};
struct mlx5dr_rule_action *rule_acts;
+ struct mlx5_flow_hw_action_params ap;
struct rte_flow_hw *flow = NULL;
struct mlx5_hw_q_job *job = NULL;
const struct rte_flow_item *rule_items;
@@ -3420,7 +3420,7 @@ flow_hw_async_flow_create(struct rte_eth_dev *dev,
* No need to copy and contrust a new "actions" list based on the
* user's input, in order to save the cost.
*/
- if (flow_hw_actions_construct(dev, job,
+ if (flow_hw_actions_construct(dev, flow, &ap,
&table->ats[action_template_index],
pattern_template_index, actions,
rule_acts, queue, error)) {
@@ -3512,6 +3512,7 @@ flow_hw_async_flow_create_by_index(struct rte_eth_dev *dev,
.burst = attr->postpone,
};
struct mlx5dr_rule_action *rule_acts;
+ struct mlx5_flow_hw_action_params ap;
struct rte_flow_hw *flow = NULL;
struct mlx5_hw_q_job *job = NULL;
uint32_t flow_idx = 0;
@@ -3564,7 +3565,7 @@ flow_hw_async_flow_create_by_index(struct rte_eth_dev *dev,
* No need to copy and contrust a new "actions" list based on the
* user's input, in order to save the cost.
*/
- if (flow_hw_actions_construct(dev, job,
+ if (flow_hw_actions_construct(dev, flow, &ap,
&table->ats[action_template_index],
0, actions, rule_acts, queue, error)) {
rte_errno = EINVAL;
@@ -3646,6 +3647,7 @@ flow_hw_async_flow_update(struct rte_eth_dev *dev,
.burst = attr->postpone,
};
struct mlx5dr_rule_action *rule_acts;
+ struct mlx5_flow_hw_action_params ap;
struct rte_flow_hw *of = (struct rte_flow_hw *)flow;
struct rte_flow_hw *nf;
struct rte_flow_template_table *table = of->table;
@@ -3698,7 +3700,7 @@ flow_hw_async_flow_update(struct rte_eth_dev *dev,
* No need to copy and contrust a new "actions" list based on the
* user's input, in order to save the cost.
*/
- if (flow_hw_actions_construct(dev, job,
+ if (flow_hw_actions_construct(dev, nf, &ap,
&table->ats[action_template_index],
nf->mt_idx, actions,
rule_acts, queue, error)) {
@@ -6682,7 +6684,7 @@ flow_hw_set_vlan_vid(struct rte_eth_dev *dev,
static __rte_always_inline int
flow_hw_set_vlan_vid_construct(struct rte_eth_dev *dev,
- struct mlx5_hw_q_job *job,
+ struct mlx5_modification_cmd *mhdr_cmd,
struct mlx5_action_construct_data *act_data,
const struct mlx5_hw_actions *hw_acts,
const struct rte_flow_action *action)
@@ -6710,8 +6712,7 @@ flow_hw_set_vlan_vid_construct(struct rte_eth_dev *dev,
.conf = &conf
};
- return flow_hw_modify_field_construct(job, act_data, hw_acts,
- &modify_action);
+ return flow_hw_modify_field_construct(mhdr_cmd, act_data, hw_acts, &modify_action);
}
static int
@@ -10121,10 +10122,6 @@ flow_hw_configure(struct rte_eth_dev *dev,
}
mem_size += (sizeof(struct mlx5_hw_q_job *) +
sizeof(struct mlx5_hw_q_job) +
- sizeof(uint8_t) * MLX5_ENCAP_MAX_LEN +
- sizeof(uint8_t) * MLX5_PUSH_MAX_LEN +
- sizeof(struct mlx5_modification_cmd) *
- MLX5_MHDR_MAX_CMD +
sizeof(struct rte_flow_item) *
MLX5_HW_MAX_ITEMS +
sizeof(struct rte_flow_hw)) *
@@ -10137,8 +10134,6 @@ flow_hw_configure(struct rte_eth_dev *dev,
goto err;
}
for (i = 0; i < nb_q_updated; i++) {
- uint8_t *encap = NULL, *push = NULL;
- struct mlx5_modification_cmd *mhdr_cmd = NULL;
struct rte_flow_item *items = NULL;
struct rte_flow_hw *upd_flow = NULL;
@@ -10152,20 +10147,11 @@ flow_hw_configure(struct rte_eth_dev *dev,
&job[_queue_attr[i - 1]->size - 1].upd_flow[1];
job = (struct mlx5_hw_q_job *)
&priv->hw_q[i].job[_queue_attr[i]->size];
- mhdr_cmd = (struct mlx5_modification_cmd *)
- &job[_queue_attr[i]->size];
- encap = (uint8_t *)
- &mhdr_cmd[_queue_attr[i]->size * MLX5_MHDR_MAX_CMD];
- push = (uint8_t *)
- &encap[_queue_attr[i]->size * MLX5_ENCAP_MAX_LEN];
items = (struct rte_flow_item *)
- &push[_queue_attr[i]->size * MLX5_PUSH_MAX_LEN];
+ &job[_queue_attr[i]->size];
upd_flow = (struct rte_flow_hw *)
&items[_queue_attr[i]->size * MLX5_HW_MAX_ITEMS];
for (j = 0; j < _queue_attr[i]->size; j++) {
- job[j].mhdr_cmd = &mhdr_cmd[j * MLX5_MHDR_MAX_CMD];
- job[j].encap_data = &encap[j * MLX5_ENCAP_MAX_LEN];
- job[j].push_data = &push[j * MLX5_PUSH_MAX_LEN];
job[j].items = &items[j * MLX5_HW_MAX_ITEMS];
job[j].upd_flow = &upd_flow[j];
priv->hw_q[i].job[j] = &job[j];
--
2.39.2
next prev parent reply other threads:[~2024-02-29 11:53 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-28 17:00 [PATCH 00/11] net/mlx5: flow insertion performance improvements Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 01/11] net/mlx5: allocate local DR rule action buffers Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 02/11] net/mlx5/hws: add check for matcher rule update support Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 03/11] net/mlx5/hws: add check if matcher contains complex rules Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 04/11] net/mlx5: skip the unneeded resource index allocation Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 05/11] net/mlx5: remove action params from job Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 06/11] net/mlx5: remove flow pattern " Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 07/11] net/mlx5: remove updated flow " Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 08/11] net/mlx5: use flow as operation container Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 09/11] net/mlx5: move rarely used flow fields outside Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 10/11] net/mlx5: reuse flow fields Dariusz Sosnowski
2024-02-28 17:00 ` [PATCH 11/11] net/mlx5: remove unneeded device status checking Dariusz Sosnowski
2024-02-29 8:52 ` [PATCH 00/11] net/mlx5: flow insertion performance improvements Ori Kam
2024-02-29 11:51 ` [PATCH v2 " Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 01/11] net/mlx5: allocate local DR rule action buffers Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 02/11] net/mlx5/hws: add check for matcher rule update support Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 03/11] net/mlx5/hws: add check if matcher contains complex rules Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 04/11] net/mlx5: skip the unneeded resource index allocation Dariusz Sosnowski
2024-02-29 11:51 ` Dariusz Sosnowski [this message]
2024-02-29 11:51 ` [PATCH v2 06/11] net/mlx5: remove flow pattern from job Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 07/11] net/mlx5: remove updated flow " Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 08/11] net/mlx5: use flow as operation container Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 09/11] net/mlx5: move rarely used flow fields outside Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 10/11] net/mlx5: reuse flow fields Dariusz Sosnowski
2024-02-29 11:51 ` [PATCH v2 11/11] net/mlx5: remove unneeded device status checking Dariusz Sosnowski
2024-03-03 12:16 ` [PATCH v2 00/11] net/mlx5: flow insertion performance improvements Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240229115157.201671-6-dsosnowski@nvidia.com \
--to=dsosnowski@nvidia.com \
--cc=bingz@nvidia.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=orika@nvidia.com \
--cc=rasland@nvidia.com \
--cc=suanmingm@nvidia.com \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).