DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
@ 2014-09-27 18:41 Wiles, Roger Keith
  2014-09-28  0:38 ` Neil Horman
  2014-09-28 22:25 ` Ananyev, Konstantin
  0 siblings, 2 replies; 5+ messages in thread
From: Wiles, Roger Keith @ 2014-09-27 18:41 UTC (permalink / raw)
  To: <dev@dpdk.org>


When __mempool_get_bulk() grabs entries from the cache it
returns zero instead of the number of entries obtained. Plus
the stats were increased by the wrong count of objects.

Signed-off-by: Keith Wiles <keith.wiles@windriver.com>
---
 lib/librte_mempool/rte_mempool.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h
index 299d4d7..6750e78 100644
--- a/lib/librte_mempool/rte_mempool.h
+++ b/lib/librte_mempool/rte_mempool.h
@@ -988,9 +988,9 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
 
        cache->len -= n;
 
-       __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
+       __MEMPOOL_STAT_ADD(mp, get_success, n);
 
-       return 0;
+       return n;
 
 ring_dequeue:
 #endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
@@ -1004,7 +1004,7 @@ ring_dequeue:
        if (ret < 0)
                __MEMPOOL_STAT_ADD(mp, get_fail, n_orig);
        else
-               __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
+               __MEMPOOL_STAT_ADD(mp, get_success, ret);
 
        return ret;
 }
-- 
2.1.0Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
  2014-09-27 18:41 [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count Wiles, Roger Keith
@ 2014-09-28  0:38 ` Neil Horman
  2014-09-28 22:25 ` Ananyev, Konstantin
  1 sibling, 0 replies; 5+ messages in thread
From: Neil Horman @ 2014-09-28  0:38 UTC (permalink / raw)
  To: Wiles, Roger Keith; +Cc: <dev@dpdk.org>

On Sat, Sep 27, 2014 at 06:41:41PM +0000, Wiles, Roger Keith wrote:
> 
> When __mempool_get_bulk() grabs entries from the cache it
> returns zero instead of the number of entries obtained. Plus
> the stats were increased by the wrong count of objects.
> 
> Signed-off-by: Keith Wiles <keith.wiles@windriver.com>
> ---
>  lib/librte_mempool/rte_mempool.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h
> index 299d4d7..6750e78 100644
> --- a/lib/librte_mempool/rte_mempool.h
> +++ b/lib/librte_mempool/rte_mempool.h
> @@ -988,9 +988,9 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
>  
>         cache->len -= n;
>  
> -       __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
> +       __MEMPOOL_STAT_ADD(mp, get_success, n);
>  
> -       return 0;
> +       return n;
>  
>  ring_dequeue:
>  #endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
> @@ -1004,7 +1004,7 @@ ring_dequeue:
>         if (ret < 0)
>                 __MEMPOOL_STAT_ADD(mp, get_fail, n_orig);
>         else
> -               __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
> +               __MEMPOOL_STAT_ADD(mp, get_success, ret);
>  
>         return ret;
>  }
> -- 
> 2.1.0Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533
> 
> 
Acked-by: Neil Horman <nhorman@tuxdriver.com>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
  2014-09-27 18:41 [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count Wiles, Roger Keith
  2014-09-28  0:38 ` Neil Horman
@ 2014-09-28 22:25 ` Ananyev, Konstantin
  2014-09-28 22:57   ` Wiles, Roger Keith
  1 sibling, 1 reply; 5+ messages in thread
From: Ananyev, Konstantin @ 2014-09-28 22:25 UTC (permalink / raw)
  To: Wiles, Roger Keith (Wind River), <dev@dpdk.org>



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wiles, Roger Keith
> Sent: Saturday, September 27, 2014 7:42 PM
> To: <dev@dpdk.org>
> Subject: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
> 
> 
> When __mempool_get_bulk() grabs entries from the cache it
> returns zero instead of the number of entries obtained. Plus
> the stats were increased by the wrong count of objects.
> 
> Signed-off-by: Keith Wiles <keith.wiles@windriver.com>
> ---
>  lib/librte_mempool/rte_mempool.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h
> index 299d4d7..6750e78 100644
> --- a/lib/librte_mempool/rte_mempool.h
> +++ b/lib/librte_mempool/rte_mempool.h
> @@ -988,9 +988,9 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
> 
>         cache->len -= n;
> 
> -       __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
> +       __MEMPOOL_STAT_ADD(mp, get_success, n);

As I can see n == n_orig.
We can completely remove n_orig, but from other side - I don't see any harm here. 

> 
> -       return 0;
> +       return n;

As I can see, __mempool_get_bulk supposed to return 0,
if all n objects were allocated from mbuf, or a negative error code otherwise.
Check all usages of __mempool_get_bulk(), plus the fact that it does below:
ret = rte_ring_mc_dequeue_bulk(mp->ring, obj_table, n);
and rte_ring_mc_dequeue_bulk() is just wrapper for __rte_ring_mc_do_dequeue(..., n, RTE_RING_QUEUE_FIXED);
I.e. - either allocate all n objects, or return with failure.
So, yes we should return 0 here.
The only thing that probably needs to be done here: fix the comments.
Instead of:
- >=0: Success; number of objects supplied.
Something like:
- 0: Success; n objects supplied.

> 
>  ring_dequeue:
>  #endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
> @@ -1004,7 +1004,7 @@ ring_dequeue:
>         if (ret < 0)
>                 __MEMPOOL_STAT_ADD(mp, get_fail, n_orig);
>         else
> -               __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
> +               __MEMPOOL_STAT_ADD(mp, get_success, ret);

That seems incorrect tom me.
ret would be either 0 on success, or negative error value.

Konstantin


> 
>         return ret;
>  }
> --
> 2.1.0Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533


As I can see 

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
  2014-09-28 22:25 ` Ananyev, Konstantin
@ 2014-09-28 22:57   ` Wiles, Roger Keith
  2014-09-28 23:00     ` Ananyev, Konstantin
  0 siblings, 1 reply; 5+ messages in thread
From: Wiles, Roger Keith @ 2014-09-28 22:57 UTC (permalink / raw)
  To: ANANYEV, KONSTANTIN; +Cc: <dev@dpdk.org>


On Sep 28, 2014, at 5:25 PM, Ananyev, Konstantin <konstantin.ananyev@intel.com> wrote:

> 
> 
>> -----Original Message-----
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wiles, Roger Keith
>> Sent: Saturday, September 27, 2014 7:42 PM
>> To: <dev@dpdk.org>
>> Subject: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
>> 
>> 
>> When __mempool_get_bulk() grabs entries from the cache it
>> returns zero instead of the number of entries obtained. Plus
>> the stats were increased by the wrong count of objects.
>> 
>> Signed-off-by: Keith Wiles <keith.wiles@windriver.com>
>> ---
>> lib/librte_mempool/rte_mempool.h | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>> 
>> diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h
>> index 299d4d7..6750e78 100644
>> --- a/lib/librte_mempool/rte_mempool.h
>> +++ b/lib/librte_mempool/rte_mempool.h
>> @@ -988,9 +988,9 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
>> 
>>        cache->len -= n;
>> 
>> -       __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
>> +       __MEMPOOL_STAT_ADD(mp, get_success, n);
> 
> As I can see n == n_orig.
> We can completely remove n_orig, but from other side - I don't see any harm here.

In the RFC patch I sent I remove n_orig.
> 
>> 
>> -       return 0;
>> +       return n;
> 
> As I can see, __mempool_get_bulk supposed to return 0,
> if all n objects were allocated from mbuf, or a negative error code otherwise.
> Check all usages of __mempool_get_bulk(), plus the fact that it does below:
> ret = rte_ring_mc_dequeue_bulk(mp->ring, obj_table, n);
> and rte_ring_mc_dequeue_bulk() is just wrapper for __rte_ring_mc_do_dequeue(..., n, RTE_RING_QUEUE_FIXED);
> I.e. - either allocate all n objects, or return with failure.
> So, yes we should return 0 here.
> The only thing that probably needs to be done here: fix the comments.
> Instead of:
> - >=0: Success; number of objects supplied.
> Something like:
> - 0: Success; n objects supplied.
> 
>> 
>> ring_dequeue:
>> #endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
>> @@ -1004,7 +1004,7 @@ ring_dequeue:
>>        if (ret < 0)
>>                __MEMPOOL_STAT_ADD(mp, get_fail, n_orig);
>>        else
>> -               __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
>> +               __MEMPOOL_STAT_ADD(mp, get_success, ret);
> 
> That seems incorrect tom me.
> ret would be either 0 on success, or negative error value.

Notice ‘if (ret < 0)’ above so ret can not be negative in this case only zero or positive.
> 
> Konstantin
> 
> 
>> 
>>        return ret;
>> }
>> --
>> 2.1.0Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533
> 
> 
> As I can see

Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
  2014-09-28 22:57   ` Wiles, Roger Keith
@ 2014-09-28 23:00     ` Ananyev, Konstantin
  0 siblings, 0 replies; 5+ messages in thread
From: Ananyev, Konstantin @ 2014-09-28 23:00 UTC (permalink / raw)
  To: Wiles, Roger Keith (Wind River); +Cc: <dev@dpdk.org>



> -----Original Message-----
> From: Wiles, Roger Keith [mailto:keith.wiles@windriver.com]
> Sent: Sunday, September 28, 2014 11:57 PM
> To: Ananyev, Konstantin
> Cc: <dev@dpdk.org>
> Subject: Re: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
> 
> 
> On Sep 28, 2014, at 5:25 PM, Ananyev, Konstantin <konstantin.ananyev@intel.com> wrote:
> 
> >
> >
> >> -----Original Message-----
> >> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Wiles, Roger Keith
> >> Sent: Saturday, September 27, 2014 7:42 PM
> >> To: <dev@dpdk.org>
> >> Subject: [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count.
> >>
> >>
> >> When __mempool_get_bulk() grabs entries from the cache it
> >> returns zero instead of the number of entries obtained. Plus
> >> the stats were increased by the wrong count of objects.
> >>
> >> Signed-off-by: Keith Wiles <keith.wiles@windriver.com>
> >> ---
> >> lib/librte_mempool/rte_mempool.h | 6 +++---
> >> 1 file changed, 3 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h
> >> index 299d4d7..6750e78 100644
> >> --- a/lib/librte_mempool/rte_mempool.h
> >> +++ b/lib/librte_mempool/rte_mempool.h
> >> @@ -988,9 +988,9 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
> >>
> >>        cache->len -= n;
> >>
> >> -       __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
> >> +       __MEMPOOL_STAT_ADD(mp, get_success, n);
> >
> > As I can see n == n_orig.
> > We can completely remove n_orig, but from other side - I don't see any harm here.
> 
> In the RFC patch I sent I remove n_orig.
> >
> >>
> >> -       return 0;
> >> +       return n;
> >
> > As I can see, __mempool_get_bulk supposed to return 0,
> > if all n objects were allocated from mbuf, or a negative error code otherwise.
> > Check all usages of __mempool_get_bulk(), plus the fact that it does below:
> > ret = rte_ring_mc_dequeue_bulk(mp->ring, obj_table, n);
> > and rte_ring_mc_dequeue_bulk() is just wrapper for __rte_ring_mc_do_dequeue(..., n, RTE_RING_QUEUE_FIXED);
> > I.e. - either allocate all n objects, or return with failure.
> > So, yes we should return 0 here.
> > The only thing that probably needs to be done here: fix the comments.
> > Instead of:
> > - >=0: Success; number of objects supplied.
> > Something like:
> > - 0: Success; n objects supplied.
> >
> >>
> >> ring_dequeue:
> >> #endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
> >> @@ -1004,7 +1004,7 @@ ring_dequeue:
> >>        if (ret < 0)
> >>                __MEMPOOL_STAT_ADD(mp, get_fail, n_orig);
> >>        else
> >> -               __MEMPOOL_STAT_ADD(mp, get_success, n_orig);
> >> +               __MEMPOOL_STAT_ADD(mp, get_success, ret);
> >
> > That seems incorrect tom me.
> > ret would be either 0 on success, or negative error value.
> 
> Notice 'if (ret < 0)' above so ret can not be negative in this case only zero or positive.

It can't be positive here. Only zero.
See above why.

> >
> > Konstantin
> >
> >
> >>
> >>        return ret;
> >> }
> >> --
> >> 2.1.0Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533
> >
> >
> > As I can see
> 
> Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2014-09-28 22:53 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-27 18:41 [dpdk-dev] [PATCH] Function __mempool_get_bulk() returns wrong count Wiles, Roger Keith
2014-09-28  0:38 ` Neil Horman
2014-09-28 22:25 ` Ananyev, Konstantin
2014-09-28 22:57   ` Wiles, Roger Keith
2014-09-28 23:00     ` Ananyev, Konstantin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).