DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] app/testpmd: configure mapping of port queues to cores
@ 2020-01-27 13:57 Asaf Sinai
  0 siblings, 0 replies; only message in thread
From: Asaf Sinai @ 2020-01-27 13:57 UTC (permalink / raw)
  To: dev


Could not find a way to map specific port queues to specific cores.
For example, mapping port 0 to cores 1-7, port 1 to cores 8-14 and port 2 to cores 15-21 is very easy in 'l3fwd' test application:

--config '(0,0,1),(0,1,2),(0,2,3),(0,3,4),(0,4,5),(0,5,6),(0,6,7),

Unfortunately, I did not find such option or similar one in 'testpmd'.
Anyone knows if it is possible, and how?


Asaf Sinai
ND SW Engineer
Email: asafsi@radware.com<mailto:asafsi@radware.com>
[Check out the latest and greatest from Radware]<https://www.radware.com/Resources/CampaignRedirector.html>


[Blog]<https://blog.radware.com/>  [https://www.radware.com/images/signature/linkedin.jpg] <https://www.linkedin.com/companies/165642> [https://www.radware.com/images/signature/twitter.jpg] <file://twitter.com/radware>   [youtube] <https://www.youtube.com/user/radwareinc>
Confidentiality note: This message, and any attachments to it, contains privileged/confidential information of RADWARE Ltd./RADWARE Inc. and may not be disclosed, used, copied, or transmitted in any form or by any means without prior written permission from RADWARE. If you are not the intended recipient, delete the message and any attachments from your system without reading or copying it, and kindly notify the sender by e-mail. Thank you.
P Please consider your environmental responsibility before printing this e-mail

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-01-27 13:57 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-27 13:57 [dpdk-dev] app/testpmd: configure mapping of port queues to cores Asaf Sinai

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git