DPDK patches and discussions
 help / color / mirror / Atom feed
From: Raslan Darawsheh <rasland@mellanox.com>
To: Suanming Mou <suanmingm@mellanox.com>,
	Slava Ovsiienko <viacheslavo@mellanox.com>,
	Matan Azrad <matan@mellanox.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2 1/3] net/mlx5: separate aging counter pool range
Date: Wed, 22 Jul 2020 11:35:38 +0000	[thread overview]
Message-ID: <AM0PR05MB6707B2B0382A66ACB4145293C2790@AM0PR05MB6707.eurprd05.prod.outlook.com> (raw)
In-Reply-To: <1595404727-164521-1-git-send-email-suanmingm@mellanox.com>

Hi,

> -----Original Message-----
> From: Suanming Mou <suanmingm@mellanox.com>
> Sent: Wednesday, July 22, 2020 10:59 AM
> To: Slava Ovsiienko <viacheslavo@mellanox.com>; Matan Azrad
> <matan@mellanox.com>
> Cc: Raslan Darawsheh <rasland@mellanox.com>; dev@dpdk.org
> Subject: [PATCH v2 1/3] net/mlx5: separate aging counter pool range
> 
> Currently, when allocate the counter or counter based age from group 0,
> counter and age may share the same counter dcs ID range. Both age and
> pure counter need to sync up with each other's container to check if
> the ID range exists and update the min_dcs.
> 
> It comes two disadvantages:
> 1. If the ID range is shared, this counter range will be queried twice
> both from age and pure counter container in 1s.
> 2. The same range counter check between the two container makes the
> counter allocate sync min_dcs time to time with extra min_dcs updating.
> 
> This patch avoid the same ID range to be shared when allocate the new
> pool. If the same ID range exists in other container, just add the
> counter to the other container until get new range which saves the
> min_dcs sync up time to time.
> 
> Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
> Acked-by: Matan Azrad <matan@mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_flow_dv.c | 69 +++++++++++++++++------------------
> ------
>  1 file changed, 28 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index f0cc7ad..2fc4457 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -4408,39 +4408,6 @@ struct field_modify_info modify_tcp[] = {
>  }
> 
>  /**
> - * Update the minimum dcs-id for aged or no-aged counter pool.
> - *
> - * @param[in] dev
> - *   Pointer to the Ethernet device structure.
> - * @param[in] pool
> - *   Current counter pool.
> - * @param[in] batch
> - *   Whether the pool is for counter that was allocated by batch command.
> - * @param[in] age
> - *   Whether the counter is for aging.
> - */
> -static void
> -flow_dv_counter_update_min_dcs(struct rte_eth_dev *dev,
> -			struct mlx5_flow_counter_pool *pool,
> -			uint32_t batch, uint32_t age)
> -{
> -	struct mlx5_priv *priv = dev->data->dev_private;
> -	struct mlx5_flow_counter_pool *other;
> -	struct mlx5_pools_container *cont;
> -
> -	cont = MLX5_CNT_CONTAINER(priv->sh, batch, (age ^ 0x1));
> -	other = flow_dv_find_pool_by_id(cont, pool->min_dcs->id);
> -	if (!other)
> -		return;
> -	if (pool->min_dcs->id < other->min_dcs->id) {
> -		rte_atomic64_set(&other->a64_dcs,
> -			rte_atomic64_read(&pool->a64_dcs));
> -	} else {
> -		rte_atomic64_set(&pool->a64_dcs,
> -			rte_atomic64_read(&other->a64_dcs));
> -	}
> -}
> -/**
>   * Prepare a new counter and/or a new counter pool.
>   *
>   * @param[in] dev
> @@ -4467,31 +4434,50 @@ struct field_modify_info modify_tcp[] = {
>  	struct mlx5_counters tmp_tq;
>  	struct mlx5_devx_obj *dcs = NULL;
>  	struct mlx5_flow_counter *cnt;
> +	uint32_t add2other;
>  	uint32_t i;
> 
>  	cont = MLX5_CNT_CONTAINER(priv->sh, batch, age);
>  	if (!batch) {
> +retry:
> +		add2other = 0;
>  		/* bulk_bitmap must be 0 for single counter allocation. */
>  		dcs = mlx5_devx_cmd_flow_counter_alloc(priv->sh->ctx, 0);
>  		if (!dcs)
>  			return NULL;
>  		pool = flow_dv_find_pool_by_id(cont, dcs->id);
> +		/* Check if counter belongs to exist pool ID range. */
>  		if (!pool) {
> -			pool = flow_dv_pool_create(dev, dcs, batch, age);
> -			if (!pool) {
> -				mlx5_devx_cmd_destroy(dcs);
> -				return NULL;
> +			pool = flow_dv_find_pool_by_id
> +			       (MLX5_CNT_CONTAINER
> +			       (priv->sh, batch, (age ^ 0x1)), dcs->id);
> +			/*
> +			 * Pool eixsts, counter will be added to the other
> +			 * container, need to reallocate it later.
> +			 */
> +			if (pool) {
> +				add2other = 1;
> +			} else {
> +				pool = flow_dv_pool_create(dev, dcs, batch,
> +							   age);
> +				if (!pool) {
> +					mlx5_devx_cmd_destroy(dcs);
> +					return NULL;
> +				}
>  			}
> -		} else if (dcs->id < pool->min_dcs->id) {
> +		}
> +		if (dcs->id < pool->min_dcs->id)
>  			rte_atomic64_set(&pool->a64_dcs,
>  					 (int64_t)(uintptr_t)dcs);
> -		}
> -		flow_dv_counter_update_min_dcs(dev,
> -						pool, batch, age);
>  		i = dcs->id % MLX5_COUNTERS_PER_POOL;
>  		cnt = MLX5_POOL_GET_CNT(pool, i);
>  		cnt->pool = pool;
>  		MLX5_GET_POOL_CNT_EXT(pool, i)->dcs = dcs;
> +		if (add2other) {
> +			TAILQ_INSERT_TAIL(&pool->counters[pool-
> >query_gen],
> +					  cnt, next);
> +			goto retry;
> +		}
>  		*cnt_free = cnt;
>  		return pool;
>  	}
> @@ -9985,3 +9971,4 @@ struct field_modify_info modify_tcp[] = {
>  };
> 
>  #endif /* HAVE_IBV_FLOW_DV_SUPPORT */
> +
> --
> 1.8.3.1


Series applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh

      parent reply	other threads:[~2020-07-22 11:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-16 12:40 [dpdk-dev] [PATCH] net/mlx5: avoid invalid counter query Suanming Mou
2020-07-22  7:58 ` [dpdk-dev] [PATCH v2 1/3] net/mlx5: separate aging counter pool range Suanming Mou
2020-07-22  7:58   ` [dpdk-dev] [PATCH v2 2/3] common/mlx5: add counter batch query ID alignment define Suanming Mou
2020-07-22 13:22     ` Ferruh Yigit
2020-07-22  7:58   ` [dpdk-dev] [PATCH v2 3/3] net/mlx5: fix invalid counter query Suanming Mou
2020-07-22 11:35   ` Raslan Darawsheh [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AM0PR05MB6707B2B0382A66ACB4145293C2790@AM0PR05MB6707.eurprd05.prod.outlook.com \
    --to=rasland@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=suanmingm@mellanox.com \
    --cc=viacheslavo@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).