DPDK patches and discussions
 help / color / mirror / Atom feed
From: Sunil Kumar Kori <skori@marvell.com>
To: Muhammad Bilal <m.bilal@emumba.com>
Cc: "declan.doherty@intel.com" <declan.doherty@intel.com>,
	"tomasz.kantecki@intel.com" <tomasz.kantecki@intel.com>,
	"Pavan Nikhilesh Bhagavatula" <pbhagavatula@marvell.com>,
	"dev@dpdk.org" <dev@dpdk.org>,
	"jgrajcia@cisco.com" <jgrajcia@cisco.com>,
	"vipin.varghese@intel.com" <vipin.varghese@intel.com>
Subject: Re: [dpdk-dev] [EXT] [PATCH 1/5] examples/l2fwd-event: free resources in case of error
Date: Tue, 16 Jun 2020 10:38:01 +0000
Message-ID: <BYAPR18MB262957B2CCB083F891A28B49B49D0@BYAPR18MB2629.namprd18.prod.outlook.com> (raw)
In-Reply-To: <CAOFC0T2MXBr91kq7=rMpvenYHiXAKHBbavSRJWpCGYcakLAyPg@mail.gmail.com>

>-----Original Message-----
>From: Muhammad Bilal <m.bilal@emumba.com>
>Sent: Tuesday, June 16, 2020 3:44 PM
>To: Sunil Kumar Kori <skori@marvell.com>
>Cc: declan.doherty@intel.com; tomasz.kantecki@intel.com; Pavan Nikhilesh
>Bhagavatula <pbhagavatula@marvell.com>; dev@dpdk.org;
>jgrajcia@cisco.com; vipin.varghese@intel.com
>Subject: Re: [EXT] [PATCH 1/5] examples/l2fwd-event: free resources in case
>of error
>
>On Tue, Jun 16, 2020 at 10:53 AM Sunil Kumar Kori <skori@marvell.com>
>wrote:
>>
>> >-----Original Message-----
>> >From: Muhammad Bilal <m.bilal@emumba.com>
>> >Sent: Monday, June 15, 2020 5:30 PM
>> >To: Sunil Kumar Kori <skori@marvell.com>
>> >Cc: declan.doherty@intel.com; tomasz.kantecki@intel.com; Pavan
>> >Nikhilesh Bhagavatula <pbhagavatula@marvell.com>; dev@dpdk.org;
>> >jgrajcia@cisco.com; vipin.varghese@intel.com
>> >Subject: Re: [EXT] [PATCH 1/5] examples/l2fwd-event: free resources
>> >in case of error
>> >
>> >On Wed, Jun 10, 2020 at 3:01 PM Sunil Kumar Kori <skori@marvell.com>
>> >wrote:
>> >>
>> >> >-----Original Message-----
>> >> >From: Muhammad Bilal <m.bilal@emumba.com>
>> >> >Sent: Tuesday, June 2, 2020 5:57 PM
>> >> >To: Sunil Kumar Kori <skori@marvell.com>
>> >> >Cc: declan.doherty@intel.com; tomasz.kantecki@intel.com; Pavan
>> >> >Nikhilesh Bhagavatula <pbhagavatula@marvell.com>; dev@dpdk.org;
>> >> >jgrajcia@cisco.com; vipin.varghese@intel.com
>> >> >Subject: Re: [EXT] [PATCH 1/5] examples/l2fwd-event: free
>> >> >resources in case of error
>> >> >
>> >> >On Tue, May 19, 2020 at 2:35 PM Sunil Kumar Kori
>> >> ><skori@marvell.com>
>> >> >wrote:
>> >> >>
>> >> >> >-----Original Message-----
>> >> >> >From: Muhammad Bilal <m.bilal@emumba.com>
>> >> >> >Sent: Tuesday, May 19, 2020 2:25 PM
>> >> >> >To: declan.doherty@intel.com; tomasz.kantecki@intel.com; Pavan
>> >> >> >Nikhilesh Bhagavatula <pbhagavatula@marvell.com>; Sunil Kumar
>> >> >> >Kori <skori@marvell.com>
>> >> >> >Cc: dev@dpdk.org; Muhammad Bilal <m.bilal@emumba.com>
>> >> >> >Subject: [EXT] [PATCH 1/5] examples/l2fwd-event: free resources
>> >> >> >in case of error
>> >> >> >
>> >> >> >External Email
>> >> >> >
>> >> >> >---------------------------------------------------------------
>> >> >> >---
>> >> >> >---
>> >> >> >- Freeing the resources and call rte_eal_cleanup in case of
>> >> >> >error exit.
>> >> >> >Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
>> >> >> >---
>> >> >> > examples/l2fwd-event/main.c | 43
>> >> >> >++++++++++++++++++++++++++++++-------
>> >> >> > 1 file changed, 35 insertions(+), 8 deletions(-)
>> >> >> >
>> >> >> >diff --git a/examples/l2fwd-event/main.c
>> >> >> >b/examples/l2fwd-event/main.c index 9593ef11e..442a664e9 100644
>> >> >> >--- a/examples/l2fwd-event/main.c
>> >> >> >+++ b/examples/l2fwd-event/main.c
>> >> >> >@@ -556,13 +556,26 @@ signal_handler(int signum)
>> >> >> >       }
>> >> >> > }
>> >> >> >
>> >> >> >+static void
>> >> >> >+stop_and_close_eth_dev(uint16_t portid) {
>> >> >> >+      RTE_ETH_FOREACH_DEV(portid) {
>> >> >> >+              printf("Closing port %d...", portid);
>> >> >> >+              rte_eth_dev_stop(portid);
>> >> >> >+              rte_eth_dev_close(portid);
>> >> >> >+              printf(" Done\n");
>> >> >> >+      }
>> >> >> >+      rte_eal_cleanup();
>> >> >> >+}
>> >> >> >+
>> >> >> > int
>> >> >> > main(int argc, char **argv)
>> >> >> > {
>> >> >> >       struct l2fwd_resources *rsrc;
>> >> >> >       uint16_t nb_ports_available = 0;
>> >> >> >       uint32_t nb_ports_in_mask = 0;
>> >> >> >-      uint16_t port_id, last_port;
>> >> >> >+      uint16_t port_id = 0;
>> >> >> >+      uint16_t last_port;
>> >> >> >       uint32_t nb_mbufs;
>> >> >> >       uint16_t nb_ports;
>> >> >> >       int i, ret;
>> >> >> >@@ -581,20 +594,26 @@ main(int argc, char **argv)
>> >> >> >
>> >> >> >       /* parse application arguments (after the EAL ones) */
>> >> >> >       ret = l2fwd_event_parse_args(argc, argv, rsrc);
>> >> >> >-      if (ret < 0)
>> >> >> >+      if (ret < 0) {
>> >> >> >+              stop_and_close_eth_dev(port_id);
>> >> >> >               rte_panic("Invalid L2FWD arguments\n");
>> >> >> >+      }
>> >> >> >
>> >> >Yes you are right we should use rte_exit instead of rte_panic, as
>> >> >rte_exit internally calls rte_eal_cleanup function.
>> >> >> IMO, up to this point only eal_init is done so rte_eal_cleanup
>> >> >> will be
>> >> >sufficient for this.
>> >> >> Also another way to handle this, use rte_exit instead rte_panic.
>> >> >> rte_exit internally calls rte_eal_cleanup. Refer l2fwd.
>> >> >>
>> >> >> Also I think, it is better to release the relevant resources on error.
>> >> >Here I'm solving the problem reported in bugzilla id 437. The bug
>> >> >was that if we use --vdev=net_memif with l2fwd application (and
>> >> >with its other variants) then a socket is created by memif PMD,
>> >> >after rte_eal_init function has run successfully. And if an error
>> >> >occurs then the application exits without freeing the resources
>> >> >(socket). On running the application 2nd time we get an error of "socket
>already exists".
>> >> >As in the previous version of patch "
>> >> >https://urldefense.proofpoint.com/v2/url?u=http-
>> >>
>>
>>>3A__patches.dpdk.org_patch_70081_&d=DwIBaQ&c=nKjWec2b6R0mOyPaz
>7
>> >x
>> >>
>>
>>>tfQ&r=dXeXaAMkP5COgn1zxHMyaF1_d9IIuq6vHQO6NrIPjaE&m=XKcRI2e7s
>M
>> >v
>> >>
>>
>>>Y0nGabnBQl_Q8meL03FXFAjeNGdCV91A&s=TKq1J0W3QbnkeuG4c63payD
>W
>> >c
>> >> >Pc4zTg4DumA95RVzwg&e=  " it was recommended to clean the
>resources
>> >> >when an error occurs.
>> >> >
>> >> >Here only using rte_eal_cleanup() is not solving the problem as
>> >> >using memif PMD is creating a socket and it's only cleaned when
>> >> >rte_eth_dev_close(portid) function is called. so that's why using
>> >> >it along with rte_exit or rte_panic.
>> >>
>> >>
>> >> Understood but I am only thinking from user's perspective that user
>> >> didn't do rte_eth_dev_configure and related APIs so closing the
>> >> device using rte_eth_dev_close does not look good.
>> >> May be other's (eal and memif PMD owners) can suggest something
>better.
>> >> Please redirect this query to them for suggestions also.
>> >Maintainer also recommended to call rte_eth_dev_close() for this
>> >problem in bug No. 437 Here :
>> >https://urldefense.proofpoint.com/v2/url?u=https-
>> >3A__bugs.dpdk.org_show-5Fbug.cgi-3Fid-3D437-
>>
>>23c1&d=DwIBaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=dXeXaAMkP5COgn1zxHM
>y
>> >aF1_d9IIuq6vHQO6NrIPjaE&m=C6PYaZqbOP-IfP6yK-
>> >nkxpSLonovGalGzl9QJ03qBmU&s=SEiTU3-
>> >EhOV5r16Kk9ZbW67E_dzuHvls4Fn41WyfCN0&e=
>>
>> In mentioned link, I see that Vipin has also suggested to clean this
>> resource in memif PMD But did not found any reason to drop that idea. I am
>still in favor of this.
>
>You are right, Vipin initially recommended change in Memif PMD but later
>agreed upon cleaning the resources in applications.
>
Okay. 

>> Also as a query, I see that changes are only l2fwd and its variants.
>> Is this problem not applicable to other applications where memif is used ?
>
>This problem is applicable to other applications where memif is used.
>We are working on other applications as time permits, Some patches already
>submitted e.g:
>https://urldefense.proofpoint.com/v2/url?u=http-
>3A__patches.dpdk.org_project_dpdk_list_-3Fseries-
>3D10458&d=DwIBaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=dXeXaAMkP5COgn1zx
>HMyaF1_d9IIuq6vHQO6NrIPjaE&m=v5R9KG76zcLqWJF7H_FNAliRW3Peorns7b
>O9tYEPZ8g&s=HjKnDn7I8abChgl_c1uoMfy8hCEb09geYL7sTHoatNY&e=
>
>>
>> >>
>> >> >>
>> >> >> >       printf("MAC updating %s\n", rsrc->mac_updating ? "enabled" :
>> >> >> >                       "disabled");
>> >> >> >
>> >> >> >       nb_ports = rte_eth_dev_count_avail();
>> >> >> >-      if (nb_ports == 0)
>> >> >> >+      if (nb_ports == 0) {
>> >> >> >+              stop_and_close_eth_dev(port_id);
>> >> >> >               rte_panic("No Ethernet ports - bye\n");
>> >> >> >+      }
>> >> >> >
>> >> >> Same as above.
>> >> >>
>> >> >> >       /* check port mask to possible port mask */
>> >> >> >-      if (rsrc->enabled_port_mask & ~((1 << nb_ports) - 1))
>> >> >> >+      if (rsrc->enabled_port_mask & ~((1 << nb_ports) - 1)) {
>> >> >> >+              stop_and_close_eth_dev(port_id);
>> >> >> >               rte_panic("Invalid portmask; possible (0x%x)\n",
>> >> >> >                       (1 << nb_ports) - 1);
>> >> >> >+      }
>> >> >> >
>> >> >> Same as above.
>> >> >>
>> >> >> >       if (!rsrc->port_pairs) {
>> >> >> >               last_port = 0;
>> >> >> >@@ -621,8 +640,10 @@ main(int argc, char **argv)
>> >> >> >                       rsrc->dst_ports[last_port] = last_port;
>> >> >> >               }
>> >> >> >       } else {
>> >> >> >-              if (check_port_pair_config(rsrc) < 0)
>> >> >> >+              if (check_port_pair_config(rsrc) < 0) {
>> >> >> >+                      stop_and_close_eth_dev(port_id);
>> >> >> >                       rte_panic("Invalid port pair config\n");
>> >> >> >+              }
>> >> >> >       }
>> >> >> >
>> >> >> >       nb_mbufs = RTE_MAX(nb_ports * (RTE_TEST_RX_DESC_DEFAULT
>> >> >> > +
>> >> >@@
>> >> >> >-634,12 +655,16 @@ main(int argc, char **argv)
>> >> >> >       rsrc->pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool",
>> >> >> >                       nb_mbufs, MEMPOOL_CACHE_SIZE, 0,
>> >> >> >                       RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
>> >> >> >-      if (rsrc->pktmbuf_pool == NULL)
>> >> >> >+      if (rsrc->pktmbuf_pool == NULL) {
>> >> >> >+              stop_and_close_eth_dev(port_id);
>> >> >> >               rte_panic("Cannot init mbuf pool\n");
>> >> >> >+      }
>> >> >> >
>> >> >> >       nb_ports_available = l2fwd_event_init_ports(rsrc);
>> >> >> >-      if (!nb_ports_available)
>> >> >> >+      if (!nb_ports_available) {
>> >> >> >+              stop_and_close_eth_dev(port_id);
>> >> >> >               rte_panic("All available ports are disabled.
>> >> >> >Please set portmask.\n");
>> >> >> >+      }
>> >> >> >
>> >> >> >       /* Configure eventdev parameters if required */
>> >> >> >       if (rsrc->event_mode)
>> >> >> >@@ -659,9 +684,11 @@ main(int argc, char **argv)
>> >> >> >                       continue;
>> >> >> >
>> >> >> >               ret = rte_eth_dev_start(port_id);
>> >> >> >-              if (ret < 0)
>> >> >> >+              if (ret < 0) {
>> >> >> >+                      stop_and_close_eth_dev(port_id);
>> >> >> >                       rte_panic("rte_eth_dev_start:err=%d,
>> >> >> >port=%u\n", ret,
>> >> >> >                                 port_id);
>> >> >> >+              }
>> >> >> >       }
>> >> >> >
>> >> >> >       if (rsrc->event_mode)
>> >> >> >--
>> >> >> >2.17.1
>> >> >>

  reply	other threads:[~2020-06-16 10:38 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19  8:54 [dpdk-dev] " Muhammad Bilal
2020-05-19  8:54 ` [dpdk-dev] [PATCH 2/5] examples/l2fwd-jobstats: " Muhammad Bilal
2020-05-19  8:54 ` [dpdk-dev] [PATCH 3/5] examples/l2fwd-keepalive: " Muhammad Bilal
2020-05-19  8:54 ` [dpdk-dev] [PATCH 4/5] examples/l2fwd-cat: " Muhammad Bilal
2020-05-19  8:54 ` [dpdk-dev] [PATCH 5/5] examples/l2fwd-crypto: " Muhammad Bilal
2020-05-19  9:34 ` [dpdk-dev] [EXT] [PATCH 1/5] examples/l2fwd-event: " Sunil Kumar Kori
2020-06-02 12:27   ` Muhammad Bilal
2020-06-10 10:01     ` Sunil Kumar Kori
2020-06-15 12:00       ` Muhammad Bilal
2020-06-16  5:53         ` Sunil Kumar Kori
2020-06-16 10:14           ` Muhammad Bilal
2020-06-16 10:38             ` Sunil Kumar Kori [this message]
2020-06-16 11:47       ` Jakub Grajciar -X (jgrajcia - PANTHEON TECH SRO at Cisco)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BYAPR18MB262957B2CCB083F891A28B49B49D0@BYAPR18MB2629.namprd18.prod.outlook.com \
    --to=skori@marvell.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=jgrajcia@cisco.com \
    --cc=m.bilal@emumba.com \
    --cc=pbhagavatula@marvell.com \
    --cc=tomasz.kantecki@intel.com \
    --cc=vipin.varghese@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git