From: "De Lara Guarch, Pablo" <pablo.de.lara.guarch@intel.com>
To: "Chen, Jing D" <jing.d.chen@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 4/6] i40e: add VMDQ support
Date: Mon, 13 Oct 2014 16:14:46 +0000 [thread overview]
Message-ID: <E115CCD9D858EF4F90C690B0DCB4D8972262B827@IRSMSX108.ger.corp.intel.com> (raw)
In-Reply-To: <1411478047-1251-5-git-send-email-jing.d.chen@intel.com>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Chen Jing D(Mark)
> Sent: Tuesday, September 23, 2014 2:14 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH 4/6] i40e: add VMDQ support
>
> From: "Chen Jing D(Mark)" <jing.d.chen@intel.com>
>
> The change includes several parts:
> 1. Get maximum number of VMDQ pools supported in dev_init.
> 2. Fill VMDQ info in i40e_dev_info_get.
> 3. Setup VMDQ pools in i40e_dev_configure.
> 4. i40e_vsi_setup change to support creation of VMDQ VSI.
>
> Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
> Acked-by: Jijiang Liu <jijiang.liu@intel.com>
> Acked-by: Huawei Xie <huawei.xie@intel.com>
> ---
> config/common_linuxapp | 1 +
> lib/librte_pmd_i40e/i40e_ethdev.c | 237
> ++++++++++++++++++++++++++++++++-----
> lib/librte_pmd_i40e/i40e_ethdev.h | 17 +++-
> 3 files changed, 225 insertions(+), 30 deletions(-)
>
> diff --git a/config/common_linuxapp b/config/common_linuxapp
> index 5bee910..d0bb3f7 100644
> --- a/config/common_linuxapp
> +++ b/config/common_linuxapp
> @@ -208,6 +208,7 @@
> CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
> CONFIG_RTE_LIBRTE_I40E_ALLOW_UNSUPPORTED_SFP=n
> CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
> CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
> +CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
Should we include this option in config_bsdapp as well?
> # interval up to 8160 us, aligned to 2 (or default value)
> CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
>
> diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c
> b/lib/librte_pmd_i40e/i40e_ethdev.c
> index a00d6ca..a267c96 100644
> --- a/lib/librte_pmd_i40e/i40e_ethdev.c
> +++ b/lib/librte_pmd_i40e/i40e_ethdev.c
> @@ -168,6 +168,7 @@ static int i40e_get_cap(struct i40e_hw *hw);
> static int i40e_pf_parameter_init(struct rte_eth_dev *dev);
> static int i40e_pf_setup(struct i40e_pf *pf);
> static int i40e_vsi_init(struct i40e_vsi *vsi);
> +static int i40e_vmdq_setup(struct rte_eth_dev *dev);
> static void i40e_stat_update_32(struct i40e_hw *hw, uint32_t reg,
> bool offset_loaded, uint64_t *offset, uint64_t *stat);
> static void i40e_stat_update_48(struct i40e_hw *hw,
> @@ -269,21 +270,11 @@ static struct eth_driver rte_i40e_pmd = {
> };
>
> static inline int
> -i40e_prev_power_of_2(int n)
> +i40e_align_floor(int n)
> {
> - int p = n;
> -
> - --p;
> - p |= p >> 1;
> - p |= p >> 2;
> - p |= p >> 4;
> - p |= p >> 8;
> - p |= p >> 16;
> - if (p == (n - 1))
> - return n;
> - p >>= 1;
> -
> - return ++p;
> + if (n == 0)
> + return 0;
> + return (1 << (sizeof(n) * CHAR_BIT - 1 - __builtin_clz(n)));
> }
>
> static inline int
> @@ -500,7 +491,7 @@ eth_i40e_dev_init(__rte_unused struct eth_driver
> *eth_drv,
> if (!dev->data->mac_addrs) {
> PMD_INIT_LOG(ERR, "Failed to allocated memory "
> "for storing mac address");
> - goto err_get_mac_addr;
> + goto err_mac_alloc;
> }
> ether_addr_copy((struct ether_addr *)hw->mac.perm_addr,
> &dev->data->mac_addrs[0]);
> @@ -521,8 +512,9 @@ eth_i40e_dev_init(__rte_unused struct eth_driver
> *eth_drv,
>
> return 0;
>
> +err_mac_alloc:
> + i40e_vsi_release(pf->main_vsi);
> err_setup_pf_switch:
> - rte_free(pf->main_vsi);
> err_get_mac_addr:
> err_configure_lan_hmc:
> (void)i40e_shutdown_lan_hmc(hw);
> @@ -541,6 +533,27 @@ err_get_capabilities:
> static int
> i40e_dev_configure(struct rte_eth_dev *dev)
> {
> + int ret;
> + enum rte_eth_rx_mq_mode mq_mode = dev->data-
> >dev_conf.rxmode.mq_mode;
> +
> + /* VMDQ setup.
> + * Needs to move VMDQ setting out of i40e_pf_config_mq_rx() as
> VMDQ and
> + * RSS setting have different requirements.
> + * General PMD driver call sequence are NIC init, configure,
> + * rx/tx_queue_setup and dev_start. In rx/tx_queue_setup()
> function, it
> + * will try to lookup the VSI that specific queue belongs to if VMDQ
> + * applicable. So, VMDQ setting has to be done before
> + * rx/tx_queue_setup(). This function is good to place vmdq_setup.
> + * For RSS setting, it will try to calculate actual configured RX queue
> + * number, which will be available after rx_queue_setup().
> dev_start()
> + * function is good to place RSS setup.
> + */
> + if (mq_mode & ETH_MQ_RX_VMDQ_FLAG) {
> + ret = i40e_vmdq_setup(dev);
> + if (ret)
> + return ret;
> + }
> +
> return i40e_dev_init_vlan(dev);
> }
>
> @@ -1389,6 +1402,16 @@ i40e_dev_info_get(struct rte_eth_dev *dev,
> struct rte_eth_dev_info *dev_info)
> DEV_TX_OFFLOAD_UDP_CKSUM |
> DEV_TX_OFFLOAD_TCP_CKSUM |
> DEV_TX_OFFLOAD_SCTP_CKSUM;
> +
> + if (pf->flags | I40E_FLAG_VMDQ) {
> + dev_info->max_vmdq_pools = pf->max_nb_vmdq_vsi;
> + dev_info->vmdq_queue_base = dev_info->max_rx_queues;
> + dev_info->vmdq_queue_num = pf->vmdq_nb_qps *
> + pf->max_nb_vmdq_vsi;
> + dev_info->vmdq_pool_base = I40E_VMDQ_POOL_BASE;
> + dev_info->max_rx_queues += dev_info-
> >vmdq_queue_num;
> + dev_info->max_tx_queues += dev_info-
> >vmdq_queue_num;
> + }
> }
>
> static int
> @@ -1814,7 +1837,7 @@ i40e_pf_parameter_init(struct rte_eth_dev *dev)
> {
> struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data-
> >dev_private);
> struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> - uint16_t sum_queues = 0, sum_vsis;
> + uint16_t sum_queues = 0, sum_vsis, left_queues;
>
> /* First check if FW support SRIOV */
> if (dev->pci_dev->max_vfs && !hw->func_caps.sr_iov_1_1) {
> @@ -1830,7 +1853,7 @@ i40e_pf_parameter_init(struct rte_eth_dev *dev)
> pf->flags |= I40E_FLAG_RSS;
> pf->lan_nb_qps = RTE_MIN(hw->func_caps.num_tx_qp,
> (uint32_t)(1 << hw-
> >func_caps.rss_table_entry_width));
> - pf->lan_nb_qps = i40e_prev_power_of_2(pf->lan_nb_qps);
> + pf->lan_nb_qps = i40e_align_floor(pf->lan_nb_qps);
> } else
> pf->lan_nb_qps = 1;
> sum_queues = pf->lan_nb_qps;
> @@ -1864,11 +1887,19 @@ i40e_pf_parameter_init(struct rte_eth_dev
> *dev)
>
> if (hw->func_caps.vmdq) {
> pf->flags |= I40E_FLAG_VMDQ;
> - pf->vmdq_nb_qps = I40E_DEFAULT_QP_NUM_VMDQ;
> - sum_queues += pf->vmdq_nb_qps;
> - sum_vsis += 1;
> - PMD_INIT_LOG(INFO, "VMDQ queue pairs:%u", pf-
> >vmdq_nb_qps);
> + pf->vmdq_nb_qps =
> RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM;
> + pf->max_nb_vmdq_vsi = 1;
> + /*
> + * If VMDQ available, assume a single VSI can be created. Will
> adjust
> + * later.
> + */
> + sum_queues += pf->vmdq_nb_qps * pf-
> >max_nb_vmdq_vsi;
> + sum_vsis += pf->max_nb_vmdq_vsi;
> + } else {
> + pf->vmdq_nb_qps = 0;
> + pf->max_nb_vmdq_vsi = 0;
> }
> + pf->nb_cfg_vmdq_vsi = 0;
>
> if (hw->func_caps.fd) {
> pf->flags |= I40E_FLAG_FDIR;
> @@ -1889,6 +1920,22 @@ i40e_pf_parameter_init(struct rte_eth_dev *dev)
> return -EINVAL;
> }
>
> + /* Adjust VMDQ setting to support as many VMs as possible */
> + if (pf->flags & I40E_FLAG_VMDQ) {
> + left_queues = hw->func_caps.num_rx_qp - sum_queues;
> +
> + pf->max_nb_vmdq_vsi += RTE_MIN(left_queues / pf-
> >vmdq_nb_qps,
> + pf->max_num_vsi - sum_vsis);
> +
> + /* Limit the max VMDQ number that rte_ether that can
> support */
> + pf->max_nb_vmdq_vsi = RTE_MIN(pf->max_nb_vmdq_vsi,
> + ETH_64_POOLS - 1);
> +
> + PMD_INIT_LOG(INFO, "Max VMDQ VSI num:%u",
> + pf->max_nb_vmdq_vsi);
> + PMD_INIT_LOG(INFO, "VMDQ queue pairs:%u", pf-
> >vmdq_nb_qps);
> + }
> +
> /* Each VSI occupy 1 MSIX interrupt at least, plus IRQ0 for misc intr
> * cause */
> if (sum_vsis > hw->func_caps.num_msix_vectors - 1) {
> @@ -2281,7 +2328,7 @@ i40e_vsi_config_tc_queue_mapping(struct i40e_vsi
> *vsi,
> vsi->enabled_tc = enabled_tcmap;
>
> /* Number of queues per enabled TC */
> - qpnum_per_tc = i40e_prev_power_of_2(vsi->nb_qps / total_tc);
> + qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc);
> qpnum_per_tc = RTE_MIN(qpnum_per_tc, I40E_MAX_Q_PER_TC);
> bsf = rte_bsf32(qpnum_per_tc);
>
> @@ -2587,6 +2634,9 @@ i40e_vsi_setup(struct i40e_pf *pf,
> case I40E_VSI_SRIOV :
> vsi->nb_qps = pf->vf_nb_qps;
> break;
> + case I40E_VSI_VMDQ2:
> + vsi->nb_qps = pf->vmdq_nb_qps;
> + break;
> default:
> goto fail_mem;
> }
> @@ -2728,8 +2778,44 @@ i40e_vsi_setup(struct i40e_pf *pf,
> * Since VSI is not created yet, only configure parameter,
> * will add vsi below.
> */
> - }
> - else {
> + } else if (type == I40E_VSI_VMDQ2) {
> + memset(&ctxt, 0, sizeof(ctxt));
> + /*
> + * For other VSI, the uplink_seid equals to uplink VSI's
> + * uplink_seid since they share same VEB
> + */
> + vsi->uplink_seid = uplink_vsi->uplink_seid;
> + ctxt.pf_num = hw->pf_id;
> + ctxt.vf_num = 0;
> + ctxt.uplink_seid = vsi->uplink_seid;
> + ctxt.connection_type = 0x1;
> + ctxt.flags = I40E_AQ_VSI_TYPE_VMDQ2;
> +
> + ctxt.info.valid_sections |=
> +
> rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SWITCH_VALID);
> + /* user_param carries flag to enable loop back */
> + if (user_param) {
> + ctxt.info.switch_id =
> +
> rte_cpu_to_le_16(I40E_AQ_VSI_SW_ID_FLAG_LOCAL_LB);
> + ctxt.info.switch_id |=
> +
> rte_cpu_to_le_16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
> + }
> +
> + /* Configure port/vlan */
> + ctxt.info.valid_sections |=
> +
> rte_cpu_to_le_16(I40E_AQ_VSI_PROP_VLAN_VALID);
> + ctxt.info.port_vlan_flags |=
> I40E_AQ_VSI_PVLAN_MODE_ALL;
> + ret = i40e_vsi_config_tc_queue_mapping(vsi, &ctxt.info,
> + I40E_DEFAULT_TCMAP);
> + if (ret != I40E_SUCCESS) {
> + PMD_DRV_LOG(ERR, "Failed to configure "
> + "TC queue mapping\n");
> + goto fail_msix_alloc;
> + }
> + ctxt.info.up_enable_bits = I40E_DEFAULT_TCMAP;
> + ctxt.info.valid_sections |=
> +
> rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SCHED_VALID);
> + } else {
> PMD_DRV_LOG(ERR, "VSI: Not support other type VSI yet");
> goto fail_msix_alloc;
> }
> @@ -2901,7 +2987,6 @@ i40e_pf_setup(struct i40e_pf *pf)
> {
> struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> struct i40e_filter_control_settings settings;
> - struct rte_eth_dev_data *dev_data = pf->dev_data;
> struct i40e_vsi *vsi;
> int ret;
>
> @@ -2923,8 +3008,6 @@ i40e_pf_setup(struct i40e_pf *pf)
> return I40E_ERR_NOT_READY;
> }
> pf->main_vsi = vsi;
> - dev_data->nb_rx_queues = vsi->nb_qps;
> - dev_data->nb_tx_queues = vsi->nb_qps;
>
> /* Configure filter control */
> memset(&settings, 0, sizeof(settings));
> @@ -3195,6 +3278,102 @@ i40e_vsi_init(struct i40e_vsi *vsi)
> return err;
> }
>
> +static int
> +i40e_vmdq_setup(struct rte_eth_dev *dev)
> +{
> + struct rte_eth_conf *conf = &dev->data->dev_conf;
> + struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data-
> >dev_private);
> + int i, err, conf_vsis, j, loop;
> + struct i40e_vsi *vsi;
> + struct i40e_vmdq_info *vmdq_info;
> + struct rte_eth_vmdq_rx_conf *vmdq_conf;
> + struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> +
> + /*
> + * Disable interrupt to avoid message from VF. Furthermore, it will
> + * avoid race condition in VSI creation/destroy.
> + */
> + i40e_pf_disable_irq0(hw);
> +
> + if ((pf->flags & I40E_FLAG_VMDQ) == 0) {
> + PMD_INIT_LOG(ERR, "FW doesn't support VMDQ");
> + return -ENOTSUP;
> + }
> +
> + conf_vsis = conf->rx_adv_conf.vmdq_rx_conf.nb_queue_pools;
> + if (conf_vsis > pf->max_nb_vmdq_vsi) {
> + PMD_INIT_LOG(ERR, "VMDQ config: %u, max support:%u",
> + conf->rx_adv_conf.vmdq_rx_conf.nb_queue_pools,
> + pf->max_nb_vmdq_vsi);
> + return -ENOTSUP;
> + }
> +
> + if (pf->vmdq != NULL) {
> + PMD_INIT_LOG(INFO, "VMDQ already configured");
> + return 0;
> + }
> +
> + pf->vmdq = rte_zmalloc("vmdq_info_struct",
> + sizeof(*vmdq_info) * conf_vsis, 0);
> +
> + if (pf->vmdq == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to allocate memory");
> + return -ENOMEM;
> + }
> +
> + vmdq_conf = &conf->rx_adv_conf.vmdq_rx_conf;
> +
> + /* Create VMDQ VSI */
> + for (i = 0; i < conf_vsis; i++) {
> + vsi = i40e_vsi_setup(pf, I40E_VSI_VMDQ2, pf->main_vsi,
> + vmdq_conf->enable_loop_back);
> + if (vsi == NULL) {
> + PMD_INIT_LOG(ERR, "Failed to create VMDQ VSI");
> + err = -1;
> + goto err_vsi_setup;
> + }
> + vmdq_info = &pf->vmdq[i];
> + vmdq_info->pf = pf;
> + vmdq_info->vsi = vsi;
> + }
> + pf->nb_cfg_vmdq_vsi = conf_vsis;
> +
> + /* Configure Vlan */
> + loop = sizeof(vmdq_conf->pool_map[0].pools) * CHAR_BIT;
> + for (i = 0; i < vmdq_conf->nb_pool_maps; i++) {
> + for (j = 0; j < loop && j < pf->nb_cfg_vmdq_vsi; j++) {
> + if (vmdq_conf->pool_map[i].pools & (1UL << j)) {
> + PMD_INIT_LOG(INFO, "Add vlan %u to vmdq
> pool %u",
> + vmdq_conf->pool_map[i].vlan_id, j);
> +
> + err = i40e_vsi_add_vlan(pf->vmdq[j].vsi,
> + vmdq_conf-
> >pool_map[i].vlan_id);
> + if (err) {
> + PMD_INIT_LOG(ERR, "Failed to add
> vlan");
> + err = -1;
> + goto err_vsi_setup;
> + }
> + }
> + }
> + }
> +
> + i40e_pf_enable_irq0(hw);
> +
> + return 0;
> +
> +err_vsi_setup:
> + for (i = 0; i < conf_vsis; i++)
> + if (pf->vmdq[i].vsi == NULL)
> + break;
> + else
> + i40e_vsi_release(pf->vmdq[i].vsi);
> +
> + rte_free(pf->vmdq);
> + pf->vmdq = NULL;
> + i40e_pf_enable_irq0(hw);
> + return err;
> +}
> +
> static void
> i40e_stat_update_32(struct i40e_hw *hw,
> uint32_t reg,
> @@ -4086,7 +4265,7 @@ i40e_pf_config_rss(struct i40e_pf *pf)
> struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> struct rte_eth_rss_conf rss_conf;
> uint32_t i, lut = 0;
> - uint16_t j, num = i40e_prev_power_of_2(pf->dev_data-
> >nb_rx_queues);
> + uint16_t j, num = i40e_align_floor(pf->dev_data->nb_rx_queues);
>
> for (i = 0, j = 0; i < hw->func_caps.rss_table_size; i++, j++) {
> if (j == num)
> diff --git a/lib/librte_pmd_i40e/i40e_ethdev.h
> b/lib/librte_pmd_i40e/i40e_ethdev.h
> index 64deef2..b06de05 100644
> --- a/lib/librte_pmd_i40e/i40e_ethdev.h
> +++ b/lib/librte_pmd_i40e/i40e_ethdev.h
> @@ -45,13 +45,15 @@
> #define I40E_QUEUE_BASE_ADDR_UNIT 128
> /* number of VSIs and queue default setting */
> #define I40E_MAX_QP_NUM_PER_VF 16
> -#define I40E_DEFAULT_QP_NUM_VMDQ 64
> #define I40E_DEFAULT_QP_NUM_FDIR 64
> #define I40E_UINT32_BIT_SIZE (CHAR_BIT * sizeof(uint32_t))
> #define I40E_VFTA_SIZE (4096 / I40E_UINT32_BIT_SIZE)
> /* Default TC traffic in case DCB is not enabled */
> #define I40E_DEFAULT_TCMAP 0x1
>
> +/* Always assign pool 0 to main VSI, VMDQ will start from 1 */
> +#define I40E_VMDQ_POOL_BASE 1
> +
> /* i40e flags */
> #define I40E_FLAG_RSS (1ULL << 0)
> #define I40E_FLAG_DCB (1ULL << 1)
> @@ -189,6 +191,14 @@ struct i40e_pf_vf {
> };
>
> /*
> + * Structure to store private data for VMDQ instance
> + */
> +struct i40e_vmdq_info {
> + struct i40e_pf *pf;
> + struct i40e_vsi *vsi;
> +};
> +
> +/*
> * Structure to store private data specific for PF instance.
> */
> struct i40e_pf {
> @@ -216,6 +226,11 @@ struct i40e_pf {
> uint16_t vmdq_nb_qps; /* The number of queue pairs of VMDq */
> uint16_t vf_nb_qps; /* The number of queue pairs of VF */
> uint16_t fdir_nb_qps; /* The number of queue pairs of Flow Director
> */
> +
> + /* VMDQ related info */
> + uint16_t max_nb_vmdq_vsi; /* Max number of VMDQ VSIs
> supported */
> + uint16_t nb_cfg_vmdq_vsi; /* number of VMDQ VSIs configured */
> + struct i40e_vmdq_info *vmdq;
> };
>
> enum pending_msg {
> --
> 1.7.7.6
next prev parent reply other threads:[~2014-10-13 16:08 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-23 13:14 [dpdk-dev] [PATCH 0/6] i40e " Chen Jing D(Mark)
2014-09-23 13:14 ` [dpdk-dev] [PATCH 1/6] ether: enhancement for " Chen Jing D(Mark)
2014-10-14 14:09 ` Thomas Monjalon
2014-10-15 6:59 ` Chen, Jing D
2014-10-15 8:10 ` Thomas Monjalon
2014-10-15 9:47 ` Chen, Jing D
2014-10-15 9:59 ` Thomas Monjalon
2014-10-16 10:07 ` [dpdk-dev] [PATCH v2 0/6] i40e " Chen Jing D(Mark)
2014-10-16 10:07 ` [dpdk-dev] [PATCH v2 1/6] ether: enhancement for " Chen Jing D(Mark)
2014-11-03 22:17 ` Thomas Monjalon
2014-11-04 5:50 ` Chen, Jing D
2014-11-04 8:53 ` Thomas Monjalon
2014-11-04 8:59 ` Chen, Jing D
2014-10-16 10:07 ` [dpdk-dev] [PATCH v2 2/6] igb: change for VMDQ arguments expansion Chen Jing D(Mark)
2014-11-03 18:37 ` Thomas Monjalon
2014-11-04 5:26 ` Chen, Jing D
2014-10-16 10:07 ` [dpdk-dev] [PATCH v2 3/6] ixgbe: " Chen Jing D(Mark)
2014-10-16 10:07 ` [dpdk-dev] [PATCH v2 4/6] i40e: add VMDQ support Chen Jing D(Mark)
2014-11-03 18:33 ` Thomas Monjalon
2014-11-04 5:22 ` Chen, Jing D
2014-10-16 10:07 ` [dpdk-dev] [PATCH v2 5/6] i40e: macaddr add/del enhancement Chen Jing D(Mark)
2014-10-16 10:07 ` [dpdk-dev] [PATCH v2 6/6] i40e: Add full VMDQ pools support Chen Jing D(Mark)
2014-10-21 3:30 ` [dpdk-dev] [PATCH v2 0/6] i40e VMDQ support Cao, Min
2014-11-03 7:54 ` Chen, Jing D
2014-11-04 10:01 ` [dpdk-dev] [PATCH v3 " Chen Jing D(Mark)
2014-11-04 10:01 ` [dpdk-dev] [PATCH v3 1/6] ether: enhancement for " Chen Jing D(Mark)
2014-11-04 10:01 ` [dpdk-dev] [PATCH v3 2/6] igb: change for VMDQ arguments expansion Chen Jing D(Mark)
2014-11-04 10:01 ` [dpdk-dev] [PATCH v3 3/6] ixgbe: " Chen Jing D(Mark)
2014-11-04 10:01 ` [dpdk-dev] [PATCH v3 4/6] i40e: add VMDQ support Chen Jing D(Mark)
2014-11-04 10:01 ` [dpdk-dev] [PATCH v3 5/6] i40e: macaddr add/del enhancement Chen Jing D(Mark)
2014-11-04 10:01 ` [dpdk-dev] [PATCH v3 6/6] i40e: Add full VMDQ pools support Chen Jing D(Mark)
2014-11-04 11:19 ` [dpdk-dev] [PATCH v3 0/6] i40e VMDQ support Ananyev, Konstantin
2014-11-04 23:17 ` Thomas Monjalon
2014-12-11 6:09 ` Cao, Min
2014-09-23 13:14 ` [dpdk-dev] [PATCH 2/6] igb: change for VMDQ arguments expansion Chen Jing D(Mark)
2014-09-23 13:14 ` [dpdk-dev] [PATCH 3/6] ixgbe: " Chen Jing D(Mark)
2014-09-23 13:14 ` [dpdk-dev] [PATCH 4/6] i40e: add VMDQ support Chen Jing D(Mark)
2014-10-13 16:14 ` De Lara Guarch, Pablo [this message]
2014-09-23 13:14 ` [dpdk-dev] [PATCH 5/6] i40e: macaddr add/del enhancement Chen Jing D(Mark)
2014-10-14 14:25 ` Thomas Monjalon
2014-10-15 7:01 ` Chen, Jing D
2014-09-23 13:14 ` [dpdk-dev] [PATCH 6/6] i40e: Add full VMDQ pools support Chen Jing D(Mark)
2014-10-10 10:45 ` [dpdk-dev] [PATCH 0/6] i40e VMDQ support Ananyev, Konstantin
2014-10-14 8:27 ` Chen, Jing D
2014-10-21 3:30 ` Cao, Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E115CCD9D858EF4F90C690B0DCB4D8972262B827@IRSMSX108.ger.corp.intel.com \
--to=pablo.de.lara.guarch@intel.com \
--cc=dev@dpdk.org \
--cc=jing.d.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).