DPDK patches and discussions
 help / color / mirror / Atom feed
From: Alan Elder <alan.elder@microsoft.com>
To: Ferruh Yigit <ferruh.yigit@amd.com>,
	Long Li <longli@microsoft.com>,
	Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Cc: "dev@dpdk.org" <dev@dpdk.org>, stephen <stephen@networkplumber.org>
Subject: [PATCH v5] net/netvsc: fix parsing of VLAN metadata
Date: Thu, 15 Feb 2024 18:12:35 +0000	[thread overview]
Message-ID: <PA4PR83MB0526A094C53E5613C0A669A3974D2@PA4PR83MB0526.EURPRD83.prod.outlook.com> (raw)
In-Reply-To: <cd727ea7-6353-4b94-acde-08a93b43f315@amd.com>

The previous code incorrectly parsed the VLAN ID and priority.
If the 16-bits of VLAN ID and priority/CFI on the wire was
0123456789ABCDEF the code parsed it as 456789ABCDEF3012.  There
were macros defined to handle this conversion but they were not
used.

Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: sthemmin@microsoft.com
Cc: stable@dpdk.org

Signed-off-by: Alan Elder <alan.elder@microsoft.com>
---
v5:
* Move the VLAN parsing macros to rte_ether.h

v4:
* Make consistent with FreeBSD code

---
 .mailmap                     |  1 +
 drivers/net/netvsc/hn_rxtx.c |  8 ++++++--
 lib/net/rte_ether.h          | 16 ++++++++++++++++
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/.mailmap b/.mailmap
index a0756974e2..eca02318d6 100644
--- a/.mailmap
+++ b/.mailmap
@@ -33,6 +33,7 @@ Alain Leon <xerebz@gmail.com>
 Alan Brady <alan.brady@intel.com>
 Alan Carew <alan.carew@intel.com>
 Alan Dewar <alan.dewar@att.com> <adewar@brocade.com>
+Alan Elder <alan.elder@microsoft.com>
 Alan Liu <zaoxingliu@gmail.com>
 Alan Winkowski <walan@marvell.com>
 Alejandro Lucero <alejandro.lucero@netronome.com>
diff --git a/drivers/net/netvsc/hn_rxtx.c b/drivers/net/netvsc/hn_rxtx.c
index e4f5015aa3..9bf1ec5509 100644
--- a/drivers/net/netvsc/hn_rxtx.c
+++ b/drivers/net/netvsc/hn_rxtx.c
@@ -612,7 +612,9 @@ static void hn_rxpkt(struct hn_rx_queue *rxq, struct hn_rx_bufinfo *rxb,
 					   RTE_PTYPE_L4_MASK);
 
 	if (info->vlan_info != HN_NDIS_VLAN_INFO_INVALID) {
-		m->vlan_tci = info->vlan_info;
+		m->vlan_tci = RTE_VLAN_TCI_MAKE(NDIS_VLAN_INFO_ID(info->vlan_info),
+						NDIS_VLAN_INFO_PRI(info->vlan_info),
+						NDIS_VLAN_INFO_CFI(info->vlan_info));
 		m->ol_flags |= RTE_MBUF_F_RX_VLAN_STRIPPED | RTE_MBUF_F_RX_VLAN;
 
 		/* NDIS always strips tag, put it back if necessary */
@@ -1332,7 +1334,9 @@ static void hn_encap(struct rndis_packet_msg *pkt,
 	if (m->ol_flags & RTE_MBUF_F_TX_VLAN) {
 		pi_data = hn_rndis_pktinfo_append(pkt, NDIS_VLAN_INFO_SIZE,
 						  NDIS_PKTINFO_TYPE_VLAN);
-		*pi_data = m->vlan_tci;
+		*pi_data = NDIS_VLAN_INFO_MAKE(RTE_VLAN_TCI_ID(m->vlan_tci),
+					       RTE_VLAN_TCI_PRI(m->vlan_tci),
+					       RTE_VLAN_TCI_DEI(m->vlan_tci));
 	}
 
 	if (m->ol_flags & RTE_MBUF_F_TX_TCP_SEG) {
diff --git a/lib/net/rte_ether.h b/lib/net/rte_ether.h
index ce073ea818..b27f38b3a9 100644
--- a/lib/net/rte_ether.h
+++ b/lib/net/rte_ether.h
@@ -46,6 +46,22 @@ extern "C" {
 
 #define RTE_ETHER_MIN_MTU 68 /**< Minimum MTU for IPv4 packets, see RFC 791. */
 
+/* VLAN header fields */
+#define RTE_VLAN_DEI_SHIFT	12
+#define RTE_VLAN_PRI_SHIFT	13
+#define RTE_VLAN_PRI_MASK	0xe000 /* Priority Code Point */
+#define RTE_VLAN_DEI_MASK	0x1000 /* Drop Eligible Indicator */
+#define RTE_VLAN_ID_MASK	0x0fff /* VLAN Identifier */
+
+#define RTE_VLAN_TCI_ID(vlan_tci)	((vlan_tci) & RTE_VLAN_ID_MASK)
+#define RTE_VLAN_TCI_PRI(vlan_tci)	(((vlan_tci) & RTE_VLAN_PRI_MASK) >>	\
+					 RTE_VLAN_PRI_SHIFT)
+#define RTE_VLAN_TCI_DEI(vlan_tci)	(((vlan_tci) & RTE_VLAN_DEI_MASK) >>	\
+					 RTE_VLAN_DEI_SHIFT)
+#define RTE_VLAN_TCI_MAKE(id, pri, dei)	((id) |					\
+					 ((pri) << RTE_VLAN_PRI_SHIFT) |	\
+					 ((dei) << RTE_VLAN_DEI_SHIFT))
+
 /**
  * Ethernet address:
  * A universally administered address is uniquely assigned to a device by its
-- 
2.25.1


  reply	other threads:[~2024-02-15 18:12 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-08 15:09 [PATCH v3] " Alan Elder
2024-02-09  1:18 ` Long Li
2024-02-09 15:50   ` [PATCH v4] " Alan Elder
2024-02-14 22:17     ` Long Li
2024-02-15 11:46       ` Ferruh Yigit
2024-02-15 18:12         ` Alan Elder [this message]
2024-02-15 18:25           ` [PATCH v5] " Stephen Hemminger
2024-02-16  9:43           ` [PATCH v6] " Alan Elder
2024-02-16 11:39             ` Ferruh Yigit
2024-02-19  9:31               ` [PATCH v7 0/2] " Alan Elder
2024-02-19  9:31               ` [PATCH v7 1/2] lib/net: " Alan Elder
2024-02-19 11:12                 ` Ferruh Yigit
2024-02-19 11:14                   ` Ferruh Yigit
2024-02-19  9:31               ` [PATCH v7 2/2] net/netvsc: " Alan Elder
2024-02-19 11:12                 ` Ferruh Yigit
2024-02-19  9:34               ` [EXTERNAL] Re: [PATCH v6] " Alan Elder
2024-02-16 11:33           ` [PATCH v5] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=PA4PR83MB0526A094C53E5613C0A669A3974D2@PA4PR83MB0526.EURPRD83.prod.outlook.com \
    --to=alan.elder@microsoft.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@amd.com \
    --cc=longli@microsoft.com \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).