From: Xiaoyun wang <cloud.wangxiaoyun@huawei.com>
To: <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, <xuanziyang2@huawei.com>,
<shahar.belkar@huawei.com>, <luoxianjun@huawei.com>,
<tanya.brokhman@huawei.com>, <zhouguoyang@huawei.com>,
<wulike1@huawei.com>, Xiaoyun wang <cloud.wangxiaoyun@huawei.com>
Subject: [dpdk-dev] [PATCH v2 12/17] net/hinic: set link down and up
Date: Wed, 25 Sep 2019 22:30:40 +0800 [thread overview]
Message-ID: <a2a857f313b1fe89acf5ad16e22c085f20086df0.1569421287.git.cloud.wangxiaoyun@huawei.com> (raw)
In-Reply-To: <cover.1569421286.git.cloud.wangxiaoyun@huawei.com>
This patch supports setting link down and up,
Also adds support for geting firmware version.
Signed-off-by: Xiaoyun wang <cloud.wangxiaoyun@huawei.com>
---
drivers/net/hinic/base/hinic_pmd_cmd.h | 4 ++
drivers/net/hinic/base/hinic_pmd_niccfg.c | 78 ++++++++++++++++++++++++++++
drivers/net/hinic/base/hinic_pmd_niccfg.h | 22 ++++++++
drivers/net/hinic/hinic_pmd_ethdev.c | 85 +++++++++++++++++++++++++++++++
4 files changed, 189 insertions(+)
diff --git a/drivers/net/hinic/base/hinic_pmd_cmd.h b/drivers/net/hinic/base/hinic_pmd_cmd.h
index 6b3dcf3..e0633bd 100644
--- a/drivers/net/hinic/base/hinic_pmd_cmd.h
+++ b/drivers/net/hinic/base/hinic_pmd_cmd.h
@@ -85,6 +85,8 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_GET_JUMBO_FRAME_SIZE = 0x4a,
HINIC_PORT_CMD_SET_JUMBO_FRAME_SIZE,
+ HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58,
+
HINIC_PORT_CMD_GET_PORT_TYPE = 0x5b,
HINIC_PORT_CMD_GET_VPORT_ENABLE = 0x5c,
@@ -119,6 +121,8 @@ enum hinic_port_cmd {
HINIC_PORT_CMD_SET_IPSU_MAC = 0xcb,
HINIC_PORT_CMD_GET_IPSU_MAC = 0xcc,
+ HINIC_PORT_CMD_SET_XSFP_STATUS = 0xD4,
+
HINIC_PORT_CMD_GET_LINK_MODE = 0xD9,
HINIC_PORT_CMD_SET_SPEED = 0xDA,
HINIC_PORT_CMD_SET_AUTONEG = 0xDB,
diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.c b/drivers/net/hinic/base/hinic_pmd_niccfg.c
index 53d981b..2dc431e 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.c
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.c
@@ -1293,6 +1293,46 @@ int hinic_set_rx_mode(void *hwdev, u32 enable)
return 0;
}
+/**
+ * hinic_get_mgmt_version - Get mgmt module version from chip.
+ *
+ * @param hwdev
+ * The hardware interface of a nic device.
+ * @param fw
+ * Firmware version.
+ *
+ * @return
+ * 0 on success.
+ * negative error value otherwise.
+ */
+int hinic_get_mgmt_version(void *hwdev, char *fw)
+{
+ struct hinic_version_info fw_ver;
+ u16 out_size = sizeof(fw_ver);
+ int err;
+
+ if (!hwdev || !fw) {
+ PMD_DRV_LOG(ERR, "Hwdev or fw is NULL");
+ return -EINVAL;
+ }
+
+ memset(&fw_ver, 0, sizeof(fw_ver));
+ fw_ver.mgmt_msg_head.resp_aeq_num = HINIC_AEQ1;
+
+ err = l2nic_msg_to_mgmt_sync(hwdev, HINIC_PORT_CMD_GET_MGMT_VERSION,
+ &fw_ver, sizeof(fw_ver), &fw_ver,
+ &out_size);
+ if (err || !out_size || fw_ver.mgmt_msg_head.status) {
+ PMD_DRV_LOG(ERR, "Failed to get mgmt version, err: %d, status: 0x%x, out size: 0x%x\n",
+ err, fw_ver.mgmt_msg_head.status, out_size);
+ return -EINVAL;
+ }
+
+ snprintf(fw, HINIC_MGMT_VERSION_MAX_LEN, "%s", fw_ver.ver);
+
+ return 0;
+}
+
int hinic_set_rx_csum_offload(void *hwdev, u32 en)
{
struct hinic_checksum_offload rx_csum_cfg;
@@ -1613,6 +1653,44 @@ int hinic_get_link_mode(void *hwdev, u32 *supported, u32 *advertised)
}
/**
+ * hinic_set_xsfp_tx_status - Enable or disable the fiber in
+ * tx direction when set link up or down.
+ *
+ * @param hwdev
+ * The hardware interface of a nic device.
+ * @param enable
+ * Enable or Disable.
+ *
+ * @return
+ * 0 on success.
+ * negative error value otherwise.
+ */
+int hinic_set_xsfp_tx_status(void *hwdev, bool enable)
+{
+ struct hinic_set_xsfp_status xsfp_status;
+ u16 out_size = sizeof(struct hinic_set_xsfp_status);
+ int err;
+
+ memset(&xsfp_status, 0, sizeof(xsfp_status));
+ xsfp_status.mgmt_msg_head.resp_aeq_num = HINIC_AEQ1;
+ xsfp_status.port_id = hinic_global_func_id(hwdev);
+ xsfp_status.xsfp_tx_dis = ((enable == 0) ? 1 : 0);
+
+ err = l2nic_msg_to_mgmt_sync(hwdev, HINIC_PORT_CMD_SET_XSFP_STATUS,
+ &xsfp_status, sizeof(struct hinic_set_xsfp_status),
+ &xsfp_status, &out_size);
+ if (err || !out_size || xsfp_status.mgmt_msg_head.status) {
+ PMD_DRV_LOG(ERR,
+ "Failed to %s port xsfp status, err: %d, status: 0x%x, out size: 0x%x\n",
+ enable ? "Disable" : "Enable", err,
+ xsfp_status.mgmt_msg_head.status, out_size);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/**
* hinic_flush_qp_res - Flush tx && rx chip resources in case of set vport
* fake failed when device start.
*
diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.h b/drivers/net/hinic/base/hinic_pmd_niccfg.h
index e8ce332..b9e037e 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.h
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.h
@@ -471,6 +471,17 @@ struct hinic_rx_mode_config {
u32 rx_mode;
};
+#define HINIC_MGMT_VERSION_MAX_LEN 32
+#define HINIC_COMPILE_TIME_LEN 20
+#define HINIC_FW_VERSION_NAME 16
+
+struct hinic_version_info {
+ struct hinic_mgmt_msg_head mgmt_msg_head;
+
+ u8 ver[HINIC_FW_VERSION_NAME];
+ u8 time[HINIC_COMPILE_TIME_LEN];
+};
+
/* rss */
struct nic_rss_indirect_tbl {
u32 group_index;
@@ -578,6 +589,13 @@ struct hinic_link_mode_cmd {
u16 advertised;
};
+struct hinic_set_xsfp_status {
+ struct hinic_mgmt_msg_head mgmt_msg_head;
+
+ u32 port_id;
+ u32 xsfp_tx_dis; /* 0: tx enable; 1: tx disable */
+};
+
struct hinic_clear_qp_resource {
struct hinic_mgmt_msg_head mgmt_msg_head;
@@ -800,6 +818,8 @@ int hinic_get_rss_type(void *hwdev, u32 tmpl_idx,
int hinic_set_rx_mode(void *hwdev, u32 enable);
+int hinic_get_mgmt_version(void *hwdev, char *fw);
+
int hinic_set_rx_csum_offload(void *hwdev, u32 en);
int hinic_set_link_status_follow(void *hwdev,
@@ -807,6 +827,8 @@ int hinic_set_link_status_follow(void *hwdev,
int hinic_get_link_mode(void *hwdev, u32 *supported, u32 *advertised);
+int hinic_set_xsfp_tx_status(void *hwdev, bool enable);
+
int hinic_flush_qp_res(void *hwdev);
int hinic_init_function_table(void *hwdev, u16 rx_buf_sz);
diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
index 2c329d1..8ea5998 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.c
+++ b/drivers/net/hinic/hinic_pmd_ethdev.c
@@ -750,6 +750,27 @@ static void hinic_get_speed_capa(struct rte_eth_dev *dev, uint32_t *speed_capa)
return 0;
}
+static int hinic_fw_version_get(struct rte_eth_dev *dev, char *fw_version,
+ size_t fw_size)
+{
+ struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
+ char fw_ver[HINIC_MGMT_VERSION_MAX_LEN] = {0};
+ int err;
+
+ err = hinic_get_mgmt_version(nic_dev->hwdev, fw_ver);
+ if (err) {
+ PMD_DRV_LOG(ERR, "Failed to get fw version\n");
+ return -EINVAL;
+ }
+
+ if (fw_size < strlen(fw_ver) + 1)
+ return (strlen(fw_ver) + 1);
+
+ snprintf(fw_version, fw_size, "%s", fw_ver);
+
+ return 0;
+}
+
static int hinic_config_rx_mode(struct hinic_nic_dev *nic_dev, u32 rx_mode_ctrl)
{
int err;
@@ -881,6 +902,66 @@ static int hinic_link_update(struct rte_eth_dev *dev, int wait_to_complete)
}
/**
+ * DPDK callback to bring the link UP.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int hinic_dev_set_link_up(struct rte_eth_dev *dev)
+{
+ struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
+ int ret;
+
+ ret = hinic_set_xsfp_tx_status(nic_dev->hwdev, true);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "Enable port tx xsfp failed, dev_name: %s, port_id: %d",
+ nic_dev->proc_dev_name, dev->data->port_id);
+ return ret;
+ }
+
+ /* link status follow phy port status, up will open pma */
+ ret = hinic_set_port_enable(nic_dev->hwdev, true);
+ if (ret)
+ PMD_DRV_LOG(ERR, "Set mac link up failed, dev_name: %s, port_id: %d",
+ nic_dev->proc_dev_name, dev->data->port_id);
+
+ return ret;
+}
+
+/**
+ * DPDK callback to bring the link DOWN.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int hinic_dev_set_link_down(struct rte_eth_dev *dev)
+{
+ struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
+ int ret;
+
+ ret = hinic_set_xsfp_tx_status(nic_dev->hwdev, false);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "Disable port tx xsfp failed, dev_name: %s, port_id: %d",
+ nic_dev->proc_dev_name, dev->data->port_id);
+ return ret;
+ }
+
+ /* link status follow phy port status, up will close pma */
+ ret = hinic_set_port_enable(nic_dev->hwdev, false);
+ if (ret)
+ PMD_DRV_LOG(ERR, "Set mac link down failed, dev_name: %s, port_id: %d",
+ nic_dev->proc_dev_name, dev->data->port_id);
+
+ return ret;
+}
+
+/**
* DPDK callback to start the device.
*
* @param dev
@@ -2751,9 +2832,12 @@ static void hinic_dev_close(struct rte_eth_dev *dev)
static const struct eth_dev_ops hinic_pmd_ops = {
.dev_configure = hinic_dev_configure,
.dev_infos_get = hinic_dev_infos_get,
+ .fw_version_get = hinic_fw_version_get,
.rx_queue_setup = hinic_rx_queue_setup,
.tx_queue_setup = hinic_tx_queue_setup,
.dev_start = hinic_dev_start,
+ .dev_set_link_up = hinic_dev_set_link_up,
+ .dev_set_link_down = hinic_dev_set_link_down,
.link_update = hinic_link_update,
.rx_queue_release = hinic_rx_queue_release,
.tx_queue_release = hinic_tx_queue_release,
@@ -2785,6 +2869,7 @@ static void hinic_dev_close(struct rte_eth_dev *dev)
static const struct eth_dev_ops hinic_pmd_vf_ops = {
.dev_configure = hinic_dev_configure,
.dev_infos_get = hinic_dev_infos_get,
+ .fw_version_get = hinic_fw_version_get,
.rx_queue_setup = hinic_rx_queue_setup,
.tx_queue_setup = hinic_tx_queue_setup,
.dev_start = hinic_dev_start,
--
1.8.3.1
next prev parent reply other threads:[~2019-09-25 14:17 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-25 14:26 [dpdk-dev] [PATCH v2 00/17] Add advanced features for Huawei hinic pmd Xiaoyun wang
2019-09-25 14:30 ` Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 01/17] net/hinic/base: add mbox command channel for SRIOV Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 02/17] net/hinic/base: add HW interfaces " Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 03/17] net/hinic: add VF PMD operation interfaces Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 04/17] net/hinic: add VLAN filter and offload Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 05/17] net/hinic: add allmulticast mode and MTU set Xiaoyun wang
2019-09-26 18:47 ` Ferruh Yigit
2019-09-30 8:43 ` Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 06/17] net/hinic: add unicast and multicast MAC set Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 07/17] net/hinic: add fdir config interface Xiaoyun wang
2019-09-26 18:48 ` Ferruh Yigit
2019-09-30 14:08 ` Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 08/17] net/hinic: add fdir validate flow operations Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 09/17] net/hinic: create and destroy ntuple filter Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 10/17] net/hinic: create and destroy fdir filter Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 11/17] net/hinic: flush " Xiaoyun wang
2019-09-25 14:30 ` Xiaoyun wang [this message]
2019-09-26 18:47 ` [dpdk-dev] [PATCH v2 12/17] net/hinic: set link down and up Ferruh Yigit
2019-09-28 8:59 ` [dpdk-dev] 答复: " Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-09-30 8:39 ` [dpdk-dev] " Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 13/17] net/hinic: support inner L3 checksum offload Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 14/17] net/hinic: support LRO offload Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 15/17] net/hinic: add hinic PMD doc files Xiaoyun wang
2019-09-26 18:51 ` Ferruh Yigit
2019-09-30 14:15 ` Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 16/17] net/hinic/base: optimize aeq interfaces Xiaoyun wang
2019-09-25 14:30 ` [dpdk-dev] [PATCH v2 17/17] net/hinic: optimize tx&rx performance Xiaoyun wang
2019-09-27 2:08 ` Gavin Hu (Arm Technology China)
2019-09-30 14:41 ` Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-09-26 18:51 ` [dpdk-dev] [PATCH v2 00/17] Add advanced features for Huawei hinic pmd Ferruh Yigit
2019-09-30 14:19 ` Wangxiaoyun (Cloud, Network Chip Application Development Dept)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a2a857f313b1fe89acf5ad16e22c085f20086df0.1569421287.git.cloud.wangxiaoyun@huawei.com \
--to=cloud.wangxiaoyun@huawei.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=luoxianjun@huawei.com \
--cc=shahar.belkar@huawei.com \
--cc=tanya.brokhman@huawei.com \
--cc=wulike1@huawei.com \
--cc=xuanziyang2@huawei.com \
--cc=zhouguoyang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).