[dpdk-dev] [RFC PATCH 2/4] ethdev: introduce Rx queue offloads API

[Shahaf Shuler <shahafs@mellanox.com>]

Introduce a new API to configure Rx offloads.

The new API will re-use existing DEV_RX_OFFLOAD_* flags
to enable the different offloads. This will ease the process
of adding a new Rx offloads, as no ABI breakage is involved.
In addition, the offload configuration can be done per queue,
instead of per port.

The Rx queue offload API can be used only with devices which advertize
the RTE_ETH_DEV_RXQ_OFFLOAD capability.

The old Rx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
 lib/librte_ether/rte_ethdev.h | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index f7a44578c..ce33c61c4 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -357,7 +357,14 @@ struct rte_eth_rxmode {
 		jumbo_frame      : 1, /**< Jumbo Frame Receipt enable. */
 		hw_strip_crc     : 1, /**< Enable CRC stripping by hardware. */
 		enable_scatter   : 1, /**< Enable scatter packets rx handler */
-		enable_lro       : 1; /**< Enable LRO */
+		enable_lro       : 1, /**< Enable LRO */
+		ignore		 : 1;
+		/**
+		 * When set the rxmode offloads should be ignored,
+		 * instead the Rx offloads will be set on rte_eth_rxq_conf.
+		 * This bit is temporary till rxmode Rx offloads API will
+		 * be deprecated.
+		 */
 };
 
 /**
@@ -691,6 +698,12 @@ struct rte_eth_rxq_conf {
 	uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
 	uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
 	uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+	uint64_t offloads;
+	/**
+	 * Enable Rx offloads using DEV_RX_OFFLOAD_* flags.
+	 * Supported only for devices which advertize the
+	 * RTE_ETH_DEV_RXQ_OFFLOAD capability.
+	 */
 };
 
 #define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
@@ -907,6 +920,19 @@ struct rte_eth_conf {
 #define DEV_RX_OFFLOAD_QINQ_STRIP  0x00000020
 #define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040
 #define DEV_RX_OFFLOAD_MACSEC_STRIP     0x00000080
+#define DEV_RX_OFFLOAD_HEADER_SPLIT	0x00000100
+#define DEV_RX_OFFLOAD_VLAN_FILTER	0x00000200
+#define DEV_RX_OFFLOAD_VLAN_EXTEND	0x00000400
+#define DEV_RX_OFFLOAD_JUMBO_FRAME	0x00000800
+#define DEV_RX_OFFLOAD_CRC_STRIP	0x00001000
+#define DEV_RX_OFFLOAD_SCATTER		0x00002000
+#define DEV_RX_OFFLOAD_LRO		0x00004000
+#define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \
+				 DEV_RX_OFFLOAD_UDP_CKSUM | \
+				 DEV_RX_OFFLOAD_TCP_CKSUM)
+#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \
+			     DEV_RX_OFFLOAD_VLAN_FILTER | \
+			     DEV_RX_OFFLOAD_VLAN_EXTEND)
 
 /**
  * TX offload capabilities of a device.
@@ -1723,6 +1749,8 @@ struct rte_eth_dev_data {
 #define RTE_ETH_DEV_BONDED_SLAVE 0x0004
 /** Device supports device removal interrupt */
 #define RTE_ETH_DEV_INTR_RMV     0x0008
+/** Device supports the rte_eth_rxq_conf offloads API */
+#define RTE_ETH_DEV_RXQ_OFFLOAD 0x0010
 
 /**
  * @internal
-- 
2.12.0