test suite reviews and discussions
 help / color / mirror / Atom feed
From: lihong <lihongx.ma@intel.com>
To: dts@dpdk.org
Cc: yinan.wang@intel.com, lihong <lihongx.ma@intel.com>
Subject: [dts] [PATCH V1] Add testsuite virtio event idx interrupt
Date: Wed, 15 May 2019 03:31:41 +0800	[thread overview]
Message-ID: <1557862301-19352-1-git-send-email-lihongx.ma@intel.com> (raw)

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 tests/TestSuite_virtio_event_idx_interrupt.py | 272 ++++++++++++++++++++++++++
 1 file changed, 272 insertions(+)
 create mode 100644 tests/TestSuite_virtio_event_idx_interrupt.py

diff --git a/tests/TestSuite_virtio_event_idx_interrupt.py b/tests/TestSuite_virtio_event_idx_interrupt.py
new file mode 100644
index 0000000..acaa18a
--- /dev/null
+++ b/tests/TestSuite_virtio_event_idx_interrupt.py
@@ -0,0 +1,272 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019> Intel Corporation.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+#   * Neither the name of Intel Corporation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Virtio idx interrupt need test with l3fwd-power sample
+"""
+
+import utils
+import time
+import thread
+import re
+from virt_common import VM
+from test_case import TestCase
+from etgen import IxiaPacketGenerator
+
+
+class TestVirtioIdxInterrupt(TestCase, IxiaPacketGenerator):
+
+    def set_up_all(self):
+        """
+        Run at the start of each test suite.
+        """
+        self.tester.extend_external_packet_generator(TestVirtioIdxInterrupt, self)
+        self.queues = 1
+        self.nb_cores = 1
+        self.dut_ports = self.dut.get_ports()
+        self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+        self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+        self.cores_num = len([n for n in self.dut.cores if int(n['socket'])
+                            == self.ports_socket])
+        self.mem_channels = self.dut.get_memory_channels()
+        self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
+
+    def set_up(self):
+        """
+        Run before each test case.
+        """
+        # Clean the execution ENV
+        self.flag = None
+        self.dut.send_expect("killall -s INT testpmd", "#")
+        self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+        self.dut.send_expect("rm -rf ./vhost-net*", "#")
+        self.vhost = self.dut.new_session(suite="vhost")
+
+    def ip(self, port, frag, src, proto, tos, dst, chksum, len, options,
+                                            version, flags, ihl, ttl, id):
+        """
+        Configure IP protocol.
+        """
+        self.add_tcl_cmd("protocol config -name ip")
+        self.add_tcl_cmd('ip config -sourceIpAddr "%s"' % src)
+        self.add_tcl_cmd('ip config -destIpAddrMode ipRandom')
+        self.add_tcl_cmd("ip config -ttl %d" % ttl)
+        self.add_tcl_cmd("ip config -totalLength %d" % len)
+        self.add_tcl_cmd("ip config -fragment %d" % frag)
+        self.add_tcl_cmd("ip config -ipProtocol %d" % proto)
+        self.add_tcl_cmd("ip config -identifier %d" % id)
+        self.add_tcl_cmd("stream config -framesize %d" % (len + 18))
+        self.add_tcl_cmd("ip set %d %d %d" % (self.chasId, port['card'],
+                                             port['port']))
+
+    def get_core_mask(self):
+        self.core_config = "1S/%dC/1T" % (self.nb_cores + 1)
+        self.verify(self.cores_num >= (self.nb_cores + 1),
+                    "There has not enough cores to test this case %s" %
+                    self.running_case)
+        self.core_list = self.dut.get_core_list(self.core_config)
+        self.core_mask = utils.create_mask(self.core_list)
+
+    def start_vhost_testpmd(self):
+        """
+        start the testpmd on vhost side
+        """
+        # get the core mask depend on the nb_cores number
+        self.get_core_mask()
+        command_line = self.dut.target + "/app/testpmd -c %s -n %d " + \
+                "--socket-mem 2048,2048 --legacy-mem --file-prefix=vhost " + \
+                "--vdev 'net_vhost,iface=vhost-net,queues=%d' -- -i " + \
+                "--nb-cores=%d --txd=1024 --rxd=1024 --rxq=%d --txq=%d"
+        command_line = command_line % (self.core_mask, self.mem_channels,
+                        self.queues, self.nb_cores, self.queues, self.queues)
+        self.vhost.send_expect(command_line, "testpmd> ", 30)
+        self.vhost.send_expect("start", "testpmd> ", 30)
+
+    def start_vms(self):
+        """
+        start qemus
+        """
+        self.vm = VM(self.dut, 'vm0', 'vhost_sample')
+        vm_params = {}
+        vm_params['driver'] = 'vhost-user'
+        vm_params['opt_path'] = './vhost-net'
+        vm_params['opt_mac'] = "00:11:22:33:44:55"
+        opt_args = "mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on"
+        if self.queues > 1:
+            vm_params['opt_queue'] = self.queues
+            opt_args = opt_args + ",mq=on,vectors=%d" % (2*self.queues + 2)
+        vm_params['opt_settings'] = opt_args
+        self.vm.set_vm_device(**vm_params)
+        try:
+            self.vm_dut = self.vm.start()
+            if self.vm_dut is None:
+                raise Exception("Set up VM ENV failed")
+        except Exception as e:
+            self.logger.error("ERROR: Failure for %s" % str(e))
+        self.vm_dut.restore_interfaces()
+
+    def config_virito_net_in_vm(self):
+        """
+        config ip for virtio net
+        set net for multi queues enable
+        """
+        self.vm_intf = self.vm_dut.ports_info[0]['intf']
+        self.vm_dut.send_expect("ifconfig %s down" % self.vm_intf, "#")
+        out = self.vm_dut.send_expect("ifconfig", "#")
+        self.verify(self.vm_intf not in out, "the virtio-pci down failed")
+        self.vm_dut.send_expect("ifconfig %s up" % self.vm_intf, "#")
+        if self.queues > 1:
+            self.vm_dut.send_expect("ethtool -L %s combined %d" %
+                            (self.vm_intf, self.queues), "#", 20)
+
+    def start_to_send_packets(self, delay):
+        """
+        start send packets
+        """
+        tgen_input = []
+        port = self.tester.get_local_port(self.dut_ports[0])
+        self.tester.scapy_append('a=[Ether(dst="%s")/IP(src="0.240.74.101",proto=255)/UDP()/("X"*18)]' % (self.dst_mac))
+        self.tester.scapy_append('wrpcap("interrupt.pcap", a)')
+        self.tester.scapy_execute()
+
+        tgen_input.append((port, port, "interrupt.pcap"))
+        _, self.flag = self.tester.traffic_generator_throughput(tgen_input, delay=delay)
+
+    def check_packets_after_reload_virtio_device(self, reload_times):
+        """
+        start to send packets and check virtio net has receive packets
+        """
+        # ixia send packets times equal to reload_times * wait_times
+        start_time = time.time()
+        thread.start_new_thread(self.start_to_send_packets, (reload_times*20,))
+        # wait the ixia begin to send packets
+        time.sleep(10)
+        self.vm_pci = self.vm_dut.ports_info[0]['pci']
+        # reload virtio device to check the virtio-net can receive packets
+        for i in range(reload_times+1):
+            if time.time() - start_time > reload_times*30:
+                self.logger.error("The ixia has stop to send packets, "
+                        "please change the delay time of ixia")
+                self.logger.info("The virtio device has reload %d times" % i)
+                return False
+            self.logger.info("The virtio net device reload %d times" % i)
+            self.vm_dut.send_expect("tcpdump -n -vv -i %s" % self.vm_intf,
+                                    "tcpdump", 30)
+            time.sleep(5)
+            out = self.vm_dut.get_session_output(timeout=3)
+            self.vm_dut.send_expect("^c", "#", 30)
+            self.verify("ip-proto-255" in out,
+                        "The virtio device can not receive packets"
+                        "after reload %d times" % i)
+            time.sleep(2)
+            # reload virtio device
+            self.vm_dut.restore_interfaces()
+            time.sleep(3)
+            self.vm_dut.send_expect("ifconfig %s down" % self.vm_intf, "#")
+            self.vm_dut.send_expect("ifconfig %s up" % self.vm_intf, "#")
+
+        # wait ixia thread exit
+        self.logger.info("wait the thread of ixia to exit")
+        while(1):
+            if self.flag is not None:
+                break
+            time.sleep(5)
+        return True
+
+    def check_each_queue_has_packets_info_on_vhost(self):
+        """
+        check each queue has receive packets on vhost side
+        """
+        out = self.vhost.send_expect("stop", "testpmd> ", 60)
+        print out
+        for queue_index in range(0, self.queues):
+            queue = re.search("Port= 0/Queue=\s*%d" % queue_index, out)
+            queue = queue.group()
+            index = out.find(queue)
+            rx = re.search("RX-packets:\s*(\d*)", out[index:])
+            tx = re.search("TX-packets:\s*(\d*)", out[index:])
+            rx_packets = int(rx.group(1))
+            tx_packets = int(tx.group(1))
+            self.verify(rx_packets > 0 and tx_packets > 0,
+                   "The queue %d rx-packets or tx-packets is 0 about " %
+                   queue_index + \
+                   "rx-packets:%d, tx-packets:%d" %
+                   (rx_packets, tx_packets))
+
+        self.vhost.send_expect("clear port stats all", "testpmd> ", 60)
+
+    def stop_all_apps(self):
+        """
+        close all vms
+        """
+        self.vm.stop()
+        self.vhost.send_expect("quit", "#", 20)
+
+    def test_perf_virito_idx_interrupt_with_virtio_pci_driver_reload(self):
+        """
+        virtio-pci driver reload test
+        """
+        self.queues = 1
+        self.nb_cores = 1
+        self.start_vhost_testpmd()
+        self.start_vms()
+        self.config_virito_net_in_vm()
+        res = self.check_packets_after_reload_virtio_device(reload_times=30)
+        self.verify(res is True, "Should increase the wait times of ixia")
+        self.stop_all_apps()
+
+    def test_perf_virtio_idx_interrupt_with_multi_queue(self):
+        """
+        wake up virtio-net cores with event idx interrupt mode 16 queues test
+        """
+        self.queues = 16
+        self.nb_cores = 16
+        self.start_vhost_testpmd()
+        self.start_vms()
+        self.config_virito_net_in_vm()
+        self.start_to_send_packets(delay=15)
+        self.check_each_queue_has_packets_info_on_vhost()
+        self.stop_all_apps()
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        """
+        self.dut.close_session(self.vhost)
+        self.dut.send_expect("killall -s INT testpmd", "#")
+        self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+    def tear_down_all(self):
+        """
+        Run after each test suite.
+        """
+        pass
-- 
2.7.4


             reply	other threads:[~2019-05-15  2:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14 19:31 lihong [this message]
2019-05-15  5:02 ` Wang, Yinan
2019-05-15  5:08   ` Ma, LihongX
2019-05-22  8:41 ` Tu, Lijuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557862301-19352-1-git-send-email-lihongx.ma@intel.com \
    --to=lihongx.ma@intel.com \
    --cc=dts@dpdk.org \
    --cc=yinan.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).