From: "Ma, LihongX" <lihongx.ma@intel.com>
To: "Wang, Yinan" <yinan.wang@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V1] Add testsuite virtio event idx interrupt
Date: Wed, 15 May 2019 05:08:04 +0000 [thread overview]
Message-ID: <BE1E572D0441E34284F1F8B7AC28F1970BAACF82@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <E0CBA5A1980F1F408E1F28F9991B5B1D50E82729@SHSMSX104.ccr.corp.intel.com>
Tested-by:lihong<lihongx.ma@intel.com>
-----Original Message-----
From: Wang, Yinan
Sent: Wednesday, May 15, 2019 1:03 PM
To: Ma, LihongX <lihongx.ma@intel.com>; dts@dpdk.org
Subject: RE: [dts][PATCH V1] Add testsuite virtio event idx interrupt
Acked-by: Wang, Yinan <yinan.wang@intel.com>
> -----Original Message-----
> From: Ma, LihongX
> Sent: 2019年5月15日 3:32
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>; Ma, LihongX
> <lihongx.ma@intel.com>
> Subject: [dts][PATCH V1] Add testsuite virtio event idx interrupt
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> tests/TestSuite_virtio_event_idx_interrupt.py | 272
> ++++++++++++++++++++++++++
> 1 file changed, 272 insertions(+)
> create mode 100644 tests/TestSuite_virtio_event_idx_interrupt.py
>
> diff --git a/tests/TestSuite_virtio_event_idx_interrupt.py
> b/tests/TestSuite_virtio_event_idx_interrupt.py
> new file mode 100644
> index 0000000..acaa18a
> --- /dev/null
> +++ b/tests/TestSuite_virtio_event_idx_interrupt.py
> @@ -0,0 +1,272 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) <2019> Intel Corporation.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +"""
> +DPDK Test suite.
> +Virtio idx interrupt need test with l3fwd-power sample """
> +
> +import utils
> +import time
> +import thread
> +import re
> +from virt_common import VM
> +from test_case import TestCase
> +from etgen import IxiaPacketGenerator
> +
> +
> +class TestVirtioIdxInterrupt(TestCase, IxiaPacketGenerator):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> +
> self.tester.extend_external_packet_generator(TestVirtioIdxInterrupt,
> self)
> + self.queues = 1
> + self.nb_cores = 1
> + self.dut_ports = self.dut.get_ports()
> + self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + self.cores_num = len([n for n in self.dut.cores if int(n['socket'])
> + == self.ports_socket])
> + self.mem_channels = self.dut.get_memory_channels()
> + self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + # Clean the execution ENV
> + self.flag = None
> + self.dut.send_expect("killall -s INT testpmd", "#")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> + self.dut.send_expect("rm -rf ./vhost-net*", "#")
> + self.vhost = self.dut.new_session(suite="vhost")
> +
> + def ip(self, port, frag, src, proto, tos, dst, chksum, len, options,
> + version, flags, ihl, ttl,
> id):
> + """
> + Configure IP protocol.
> + """
> + self.add_tcl_cmd("protocol config -name ip")
> + self.add_tcl_cmd('ip config -sourceIpAddr "%s"' % src)
> + self.add_tcl_cmd('ip config -destIpAddrMode ipRandom')
> + self.add_tcl_cmd("ip config -ttl %d" % ttl)
> + self.add_tcl_cmd("ip config -totalLength %d" % len)
> + self.add_tcl_cmd("ip config -fragment %d" % frag)
> + self.add_tcl_cmd("ip config -ipProtocol %d" % proto)
> + self.add_tcl_cmd("ip config -identifier %d" % id)
> + self.add_tcl_cmd("stream config -framesize %d" % (len + 18))
> + self.add_tcl_cmd("ip set %d %d %d" % (self.chasId, port['card'],
> + port['port']))
> +
> + def get_core_mask(self):
> + self.core_config = "1S/%dC/1T" % (self.nb_cores + 1)
> + self.verify(self.cores_num >= (self.nb_cores + 1),
> + "There has not enough cores to test this case %s" %
> + self.running_case)
> + self.core_list = self.dut.get_core_list(self.core_config)
> + self.core_mask = utils.create_mask(self.core_list)
> +
> + def start_vhost_testpmd(self):
> + """
> + start the testpmd on vhost side
> + """
> + # get the core mask depend on the nb_cores number
> + self.get_core_mask()
> + command_line = self.dut.target + "/app/testpmd -c %s -n %d " + \
> + "--socket-mem 2048,2048 --legacy-mem
> + --file-prefix=vhost
> " + \
> + "--vdev 'net_vhost,iface=vhost-net,queues=%d' -- -i " + \
> + "--nb-cores=%d --txd=1024 --rxd=1024 --rxq=%d --txq=%d"
> + command_line = command_line % (self.core_mask,
> self.mem_channels,
> + self.queues, self.nb_cores, self.queues,
> self.queues)
> + self.vhost.send_expect(command_line, "testpmd> ", 30)
> + self.vhost.send_expect("start", "testpmd> ", 30)
> +
> + def start_vms(self):
> + """
> + start qemus
> + """
> + self.vm = VM(self.dut, 'vm0', 'vhost_sample')
> + vm_params = {}
> + vm_params['driver'] = 'vhost-user'
> + vm_params['opt_path'] = './vhost-net'
> + vm_params['opt_mac'] = "00:11:22:33:44:55"
> + opt_args =
> "mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=o
> n"
> + if self.queues > 1:
> + vm_params['opt_queue'] = self.queues
> + opt_args = opt_args + ",mq=on,vectors=%d" %
> + (2*self.queues
> + 2)
> + vm_params['opt_settings'] = opt_args
> + self.vm.set_vm_device(**vm_params)
> + try:
> + self.vm_dut = self.vm.start()
> + if self.vm_dut is None:
> + raise Exception("Set up VM ENV failed")
> + except Exception as e:
> + self.logger.error("ERROR: Failure for %s" % str(e))
> + self.vm_dut.restore_interfaces()
> +
> + def config_virito_net_in_vm(self):
> + """
> + config ip for virtio net
> + set net for multi queues enable
> + """
> + self.vm_intf = self.vm_dut.ports_info[0]['intf']
> + self.vm_dut.send_expect("ifconfig %s down" % self.vm_intf, "#")
> + out = self.vm_dut.send_expect("ifconfig", "#")
> + self.verify(self.vm_intf not in out, "the virtio-pci down failed")
> + self.vm_dut.send_expect("ifconfig %s up" % self.vm_intf, "#")
> + if self.queues > 1:
> + self.vm_dut.send_expect("ethtool -L %s combined %d" %
> + (self.vm_intf, self.queues), "#", 20)
> +
> + def start_to_send_packets(self, delay):
> + """
> + start send packets
> + """
> + tgen_input = []
> + port = self.tester.get_local_port(self.dut_ports[0])
> +
> self.tester.scapy_append('a=[Ether(dst="%s")/IP(src="0.240.74.101",pro
> to=25
> 5)/UDP()/("X"*18)]' % (self.dst_mac))
> + self.tester.scapy_append('wrpcap("interrupt.pcap", a)')
> + self.tester.scapy_execute()
> +
> + tgen_input.append((port, port, "interrupt.pcap"))
> + _, self.flag =
> + self.tester.traffic_generator_throughput(tgen_input, delay=delay)
> +
> + def check_packets_after_reload_virtio_device(self, reload_times):
> + """
> + start to send packets and check virtio net has receive packets
> + """
> + # ixia send packets times equal to reload_times * wait_times
> + start_time = time.time()
> + thread.start_new_thread(self.start_to_send_packets,
> (reload_times*20,))
> + # wait the ixia begin to send packets
> + time.sleep(10)
> + self.vm_pci = self.vm_dut.ports_info[0]['pci']
> + # reload virtio device to check the virtio-net can receive packets
> + for i in range(reload_times+1):
> + if time.time() - start_time > reload_times*30:
> + self.logger.error("The ixia has stop to send packets, "
> + "please change the delay time of ixia")
> + self.logger.info("The virtio device has reload %d
> + times" %
> i)
> + return False
> + self.logger.info("The virtio net device reload %d times" % i)
> + self.vm_dut.send_expect("tcpdump -n -vv -i %s" % self.vm_intf,
> + "tcpdump", 30)
> + time.sleep(5)
> + out = self.vm_dut.get_session_output(timeout=3)
> + self.vm_dut.send_expect("^c", "#", 30)
> + self.verify("ip-proto-255" in out,
> + "The virtio device can not receive packets"
> + "after reload %d times" % i)
> + time.sleep(2)
> + # reload virtio device
> + self.vm_dut.restore_interfaces()
> + time.sleep(3)
> + self.vm_dut.send_expect("ifconfig %s down" %
> + self.vm_intf,
> "#")
> + self.vm_dut.send_expect("ifconfig %s up" % self.vm_intf,
> + "#")
> +
> + # wait ixia thread exit
> + self.logger.info("wait the thread of ixia to exit")
> + while(1):
> + if self.flag is not None:
> + break
> + time.sleep(5)
> + return True
> +
> + def check_each_queue_has_packets_info_on_vhost(self):
> + """
> + check each queue has receive packets on vhost side
> + """
> + out = self.vhost.send_expect("stop", "testpmd> ", 60)
> + print out
> + for queue_index in range(0, self.queues):
> + queue = re.search("Port= 0/Queue=\s*%d" % queue_index,
> out)
> + queue = queue.group()
> + index = out.find(queue)
> + rx = re.search("RX-packets:\s*(\d*)", out[index:])
> + tx = re.search("TX-packets:\s*(\d*)", out[index:])
> + rx_packets = int(rx.group(1))
> + tx_packets = int(tx.group(1))
> + self.verify(rx_packets > 0 and tx_packets > 0,
> + "The queue %d rx-packets or tx-packets is 0 about " %
> + queue_index + \
> + "rx-packets:%d, tx-packets:%d" %
> + (rx_packets, tx_packets))
> +
> + self.vhost.send_expect("clear port stats all", "testpmd> ",
> + 60)
> +
> + def stop_all_apps(self):
> + """
> + close all vms
> + """
> + self.vm.stop()
> + self.vhost.send_expect("quit", "#", 20)
> +
> + def test_perf_virito_idx_interrupt_with_virtio_pci_driver_reload(self):
> + """
> + virtio-pci driver reload test
> + """
> + self.queues = 1
> + self.nb_cores = 1
> + self.start_vhost_testpmd()
> + self.start_vms()
> + self.config_virito_net_in_vm()
> + res =
> self.check_packets_after_reload_virtio_device(reload_times=30)
> + self.verify(res is True, "Should increase the wait times of ixia")
> + self.stop_all_apps()
> +
> + def test_perf_virtio_idx_interrupt_with_multi_queue(self):
> + """
> + wake up virtio-net cores with event idx interrupt mode 16
> + queues
> test
> + """
> + self.queues = 16
> + self.nb_cores = 16
> + self.start_vhost_testpmd()
> + self.start_vms()
> + self.config_virito_net_in_vm()
> + self.start_to_send_packets(delay=15)
> + self.check_each_queue_has_packets_info_on_vhost()
> + self.stop_all_apps()
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.close_session(self.vhost)
> + self.dut.send_expect("killall -s INT testpmd", "#")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64",
> + "#")
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> --
> 2.7.4
next prev parent reply other threads:[~2019-05-15 5:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-14 19:31 lihong
2019-05-15 5:02 ` Wang, Yinan
2019-05-15 5:08 ` Ma, LihongX [this message]
2019-05-22 8:41 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BE1E572D0441E34284F1F8B7AC28F1970BAACF82@SHSMSX101.ccr.corp.intel.com \
--to=lihongx.ma@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).