From: Wenjie Li <wenjiex.a.li@intel.com>
To: dts@dpdk.org
Cc: Wenjie Li <wenjiex.a.li@intel.com>
Subject: [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings
Date: Wed, 12 Jun 2019 17:00:09 +0800 [thread overview]
Message-ID: <1560330010-2936-1-git-send-email-wenjiex.a.li@intel.com> (raw)
fix some build warnings.
Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
---
.../eventdev_pipeline_perf_test_plan.rst | 31 +++++++++++++------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/test_plans/eventdev_pipeline_perf_test_plan.rst b/test_plans/eventdev_pipeline_perf_test_plan.rst
index 619f9a3..0cd9110 100644
--- a/test_plans/eventdev_pipeline_perf_test_plan.rst
+++ b/test_plans/eventdev_pipeline_perf_test_plan.rst
@@ -31,10 +31,12 @@ echo 24 > /proc/sys/vm/nr_hugepages
Configure limits of Eventdev devices
====================================
Set all eventdev devices sso and ssow limits to zero. Then set eventdev device under tests sso and ssow limits to non-zero values as per cores/queues requriments ::
+
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
Example ::
+
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
@@ -51,7 +53,8 @@ Description: Execute performance test with Atomic_atq type of stage in multi-flo
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -74,7 +77,8 @@ Description: Execute performance test with Parallel_atq type of stage in multi-f
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 -p --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -98,7 +102,8 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 -o --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -122,7 +127,8 @@ Description: Execute performance test with Atomic_atq type of stage in multi-flo
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -145,7 +151,8 @@ Description: Execute performance test with Parallel_atq type of stage in multi-f
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -p --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -169,7 +176,8 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -o --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -193,7 +201,8 @@ Description: Execute performance test with Atomic_atq type of stage in multi-flo
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -216,7 +225,8 @@ Description: Execute performance test with Parallel_atq type of stage in multi-f
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 -p --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -240,7 +250,8 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 -o --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -254,4 +265,4 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
2. Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
-3. Observe the speed of packets received(Rx-rate) on Ixia.
+3. Observe the speed of packets received(Rx-rate) on Ixia.
\ No newline at end of file
--
2.17.2
next reply other threads:[~2019-06-12 8:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-12 9:00 Wenjie Li [this message]
2019-06-12 9:00 ` [dts] [PATCH V1 2/2] test_plans/index: append eventdev_pipeline_perf Wenjie Li
2019-06-13 9:11 ` Tu, Lijuan
2019-06-13 9:11 ` [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1560330010-2936-1-git-send-email-wenjiex.a.li@intel.com \
--to=wenjiex.a.li@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).