test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v2] test_plans/dpdk_gro_lib: add test plan for dpdk gro lib test
@ 2019-05-15  1:37 Yinan
  2019-05-22  8:41 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-05-15  1:37 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 14680 bytes --]

From: Wang Yinan <yinan.wang@intel.com>

---
 test_plans/dpdk_gro_lib_test_plan.rst | 324 ++++++++++++++++++++++++++
 1 file changed, 324 insertions(+)
 create mode 100644 test_plans/dpdk_gro_lib_test_plan.rst

diff --git a/test_plans/dpdk_gro_lib_test_plan.rst b/test_plans/dpdk_gro_lib_test_plan.rst
new file mode 100644
index 0000000..4ca78ef
--- /dev/null
+++ b/test_plans/dpdk_gro_lib_test_plan.rst
@@ -0,0 +1,324 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+======================
+DPDK GRO lib test plan
+======================
+
+Generic Receive Offload (GRO) is a widely used SW-based offloading
+technique to reduce per-packet processing overheads. By reassembling
+small packets into larger ones, GRO enables applications to process
+fewer large packets directly, thus reducing the number of packets to
+be processed. To benefit DPDK-based applications, like Open vSwitch,
+DPDK also provides own GRO implementation. In DPDK, GRO is implemented
+as a standalone library. Applications explicitly use the GRO library to
+reassemble packets.
+
+In the GRO library, there are many GRO types which are defined by packet
+types. One GRO type is in charge of process one kind of packets. For
+example, TCP/IPv4 GRO processes TCP/IPv4 packets.
+
+Each GRO type has a reassembly function, which defines own algorithm and
+table structure to reassemble packets. We assign input packets to the
+corresponding GRO functions by MBUF->packet_type.
+
+The GRO library doesn't check if input packets have correct checksums and
+doesn't re-calculate checksums for merged packets. The GRO library
+assumes the packets are complete (i.e., MF==0 && frag_off==0), when IP
+fragmentation is possible (i.e., DF==0). Additionally, it complies RFC
+6864 to process the IPv4 ID field.
+
+Currently, the GRO library provides GRO supports for TCP/IPv4 packets and
+VxLAN packets which contain an outer IPv4 header and an inner TCP/IPv4
+packet.
+
+This test plan includes dpdk gro lib test with TCP/IPv4 traffic and VxLAN traffic,
+also cover lightmode and heavymode test.
+
+Prerequisites
+=============
+
+Modify the testpmd code as following::
+
+    --- a/app/test-pmd/csumonly.c
+    +++ b/app/test-pmd/csumonly.c
+    @@ -693,10 +693,12 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
+                     * and inner headers */
+     
+                    eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+    +#if 0
+                    ether_addr_copy(&peer_eth_addrs[fs->peer_addr],
+                                    &eth_hdr->d_addr);
+                    ether_addr_copy(&ports[fs->tx_port].eth_addr,
+                                    &eth_hdr->s_addr);
+    +#endif
+                    parse_ethernet(eth_hdr, &info);
+                    l3_hdr = (char *)eth_hdr + info.l2_len;
+
+Test flow
+=========
+
+NIC2(In kernel) -> NIC1(DPDK) -> testpmd(csum fwd) -> Vhost -> Virtio-net
+
+Test Case1: DPDK GRO lightmode test with tcp/ipv4 traffic
+=========================================================
+
+1. Connect two nic port directly, put nic2 into another namesapce and turn on the tso of this nic port by below cmds::
+
+    ip netns del ns1
+    ip netns add ns1
+    ip link set [enp216s0f0] netns ns1       # [enp216s0f0] is the name of nic2
+    ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
+    ip netns exec ns1 ethtool -K [enp216s0f0] tso on
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 1::
+
+    ./dpdk-devbind.py -b igb_uio xx:xx.x
+    ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024  --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+    testpmd>set fwd csum
+    testpmd>stop
+    testpmd>port stop 0
+    testpmd>port stop 1
+    testpmd>csum set tcp hw 0
+    testpmd>csum set ip hw 0
+    testpmd>csum set tcp hw 1
+    testpmd>csum set ip hw 1
+    testpmd>set port 0 gro on
+    testpmd>set gro flush 1
+    testpmd>port start 0
+    testpmd>port start 1
+    testpmd>start
+
+3.  Set up vm with virto device and using kernel virtio-net driver::
+
+    taskset -c 13 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+       -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+       -numa node,memdev=mem \
+       -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+       -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img  \
+       -chardev socket,id=char0,path=./vhost-net \
+       -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+       -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+       -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+    ifconfig [ens3] 1.1.1.2 up  # [ens3] is the name of virtio-net
+    ethtool -K [ens3] gro off
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+    Host side :  ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
+    VM side:     iperf -s
+
+Test Case2: DPDK GRO heavymode test with tcp/ipv4 traffic
+=========================================================
+
+1. Connect two nic port directly, put nic2 into another namesapce and turn on the tso of this nic port by below cmds::
+
+    ip netns del ns1
+    ip netns add ns1
+    ip link set [enp216s0f0] netns ns1       # [enp216s0f0] is the name of nic2
+    ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
+    ip netns exec ns1 ethtool -K [enp216s0f0] tso on
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 2::
+
+    ./dpdk-devbind.py -b igb_uio xx:xx.x
+    ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024  --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+    testpmd>set fwd csum
+    testpmd>stop
+    testpmd>port stop 0
+    testpmd>port stop 1
+    testpmd>csum set tcp hw 0
+    testpmd>csum set ip hw 0
+    testpmd>csum set tcp hw 1
+    testpmd>csum set ip hw 1
+    testpmd>set port 0 gro on
+    testpmd>set gro flush 2
+    testpmd>port start 0
+    testpmd>port start 1
+    testpmd>start
+
+3.  Set up vm with virto device and using kernel virtio-net driver::
+
+    taskset -c 13 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+       -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+       -numa node,memdev=mem \
+       -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+       -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img  \
+       -chardev socket,id=char0,path=./vhost-net \
+       -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+       -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+       -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+    ifconfig [ens3] 1.1.1.2 up  # [ens3] is the name of virtio-net
+    ethtool -K [ens3] gro off
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+    Host side :  ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
+    VM side:     iperf -s
+
+Test Case3: DPDK GRO heavymode_flush4 test with tcp/ipv4 traffic
+================================================================
+
+1. Connect two nic port directly, put nic2 into another namesapce and turn on the tso of this nic port by below cmds::
+
+    ip netns del ns1
+    ip netns add ns1
+    ip link set [enp216s0f0] netns ns1       # [enp216s0f0] is the name of nic2
+    ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
+    ip netns exec ns1 ethtool -K [enp216s0f0] tso on
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 4::
+
+    ./dpdk-devbind.py -b igb_uio xx:xx.x
+    ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024  --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+    testpmd>set fwd csum
+    testpmd>stop
+    testpmd>port stop 0
+    testpmd>port stop 1
+    testpmd>csum set tcp hw 0
+    testpmd>csum set ip hw 0
+    testpmd>csum set tcp hw 1
+    testpmd>csum set ip hw 1
+    testpmd>set port 0 gro on
+    testpmd>set gro flush 4
+    testpmd>port start 0
+    testpmd>port start 1
+    testpmd>start
+
+3.  Set up vm with virto device and using kernel virtio-net driver::
+
+    taskset -c 13 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+       -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+       -numa node,memdev=mem \
+       -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+       -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img  \
+       -chardev socket,id=char0,path=./vhost-net \
+       -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+       -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+       -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+    ifconfig [ens3] 1.1.1.2 up  # [ens3] is the name of virtio-net
+    ethtool -K [ens3] gro off
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+    Host side :  ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60 -m -P 1
+    VM side:     iperf -s
+
+Test Case4: DPDK GRO test with vxlan traffic
+============================================
+
+Vxlan topology
+--------------
+  VM          Host
+50.1.1.2      50.1.1.1
+   |           |
+1.1.2.3       1.1.2.4
+   |------------Testpmd------------|
+
+1. Connect two nic port directly, put nic2 into another namesapce and create Host VxLAN port::
+
+    ip netns del ns1
+    ip netns add ns1
+    ip link set [enp216s0f0] netns ns1    # [enp216s0f0] is the name of nic2
+    ip netns exec ns1 ifconfig [enp216s0f0] 1.1.2.4/24 up
+    VXLAN_NAME=vxlan1
+    VXLAN_IP=50.1.1.1
+    IF_NAME=[enp216s0f0]
+    VM_IP=1.1.2.3
+    ip netns exec t2 ip link add $VXLAN_NAME type vxlan id 42 dev $IF_NAME dstport 4789
+    ip netns exec t2 bridge fdb append to 00:00:00:00:00:00 dst $VM_IP dev $VXLAN_NAME
+    ip netns exec t2 ip addr add $VXLAN_IP/24 dev $VXLAN_NAME
+    ip netns exec t2 ip link set up dev $VXLAN_NAME
+
+2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 4::
+
+    ./dpdk-devbind.py -b igb_uio xx:xx.x
+    ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024  --legacy-mem \
+    --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
+    testpmd>set fwd csum
+    testpmd>stop
+    testpmd>port stop 0
+    testpmd>port stop 1
+    testpmd>csum set tcp hw 0
+    testpmd>csum set ip hw 0
+    testpmd>csum parse-tunnel on 0
+    testpmd>csum parse-tunnel on 1
+    testpmd>csum set outer-ip hw 0
+    testpmd>csum set tcp hw 1
+    testpmd>csum set ip hw 1
+    testpmd>set port 0 gro on
+    testpmd>set gro flush 4
+    testpmd>port start 0
+    testpmd>port start 1
+    testpmd>start
+
+3.  Set up vm with virto device and using kernel virtio-net driver::
+
+    taskset -c 13 \
+    qemu-system-x86_64 -name us-vhost-vm1 \
+       -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+       -numa node,memdev=mem \
+       -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+       -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img  \
+       -chardev socket,id=char0,path=./vhost-net \
+       -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+       -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on \
+       -vnc :10 -daemonize
+
+4. In vm, config the virtio-net device with ip and turn the kernel gro off::
+
+    ip link add vxlan0 type vxlan id 42 dev [ens3] dstport 4789   # [ens3] is the name of virtio-net
+    bridge fdb add to 00:00:00:00:00:00 dst 1.1.2.4 dev vxlan0
+    ip addr add 50.1.1.2/24 dev vxlan0
+    ip link set up dev vxlan0
+    ifconfig [ens3] 1.1.2.3/24 up
+    ifconfig -a
+
+5. Start iperf test, run iperf server at vm side and iperf client at host side, check throughput in log::
+
+    Host side :  ip netns exec t2 iperf -c 50.1.1.2 -i 2 -t 60 -f g -m
+    VM side:     iperf -s -f g
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-05-22  8:41 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-15  1:37 [dts] [PATCH v2] test_plans/dpdk_gro_lib: add test plan for dpdk gro lib test Yinan
2019-05-22  8:41 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).