* [dts] [PATCH v2] test_plans/vm2vm_virtio_pmd: add three cbdma cases
@ 2021-07-02 17:28 Yinan Wang
2021-07-12 3:04 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan Wang @ 2021-07-02 17:28 UTC (permalink / raw)
To: dts; +Cc: Yinan Wang
Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
test_plans/vm2vm_virtio_pmd_test_plan.rst | 246 ++++++++++++++++++++--
1 file changed, 230 insertions(+), 16 deletions(-)
diff --git a/test_plans/vm2vm_virtio_pmd_test_plan.rst b/test_plans/vm2vm_virtio_pmd_test_plan.rst
index db410e48..0b1d4a7f 100644
--- a/test_plans/vm2vm_virtio_pmd_test_plan.rst
+++ b/test_plans/vm2vm_virtio_pmd_test_plan.rst
@@ -1,4 +1,4 @@
-.. Copyright (c) <2019>, Intel Corporation
+.. Copyright (c) <2021>, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -38,20 +38,6 @@ This test plan includes vm2vm mergeable, normal and vector_rx path test with vir
also add mergeable and normal path test with virtio 1.1. Specially, three mergeable path cases check the
payload of each packets are valid by using pdump.
-Prerequisites
-=============
-
-Enable pcap lib in dpdk code and recompile::
-
- --- a/config/common_base
- +++ b/config/common_base
- @@ -492,7 +492,7 @@ CONFIG_RTE_LIBRTE_PMD_NULL=y
- #
- # Compile software PMD backed by PCAP files
- #
- -CONFIG_RTE_LIBRTE_PMD_PCAP=n
- +CONFIG_RTE_LIBRTE_PMD_PCAP=y
-
Test flow
=========
Virtio-pmd <-> Vhost-user <-> Testpmd <-> Vhost-user <-> Virtio-pmd
@@ -593,4 +579,232 @@ Test Case 8: VM2VM vhost-user/virtio1.1-pmd with normal path
xxxxx
Throughput (since last show)
RX-pps: xxx
- TX-pps: xxx
\ No newline at end of file
+ TX-pps: xxx
+
+Test Case 9: VM2VM virtio-pmd split ring mergeable path 8 queues CBDMA enable with server mode stable test
+==========================================================================================================
+
+1. Bind 16 cbdma channels to igb_uio driver, then launch the testpmd with 2 vhost port and 8 queues by below commands::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+2. Launch VM1 and VM2 using qemu5.2.0::
+
+ taskset -c 6-16 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 17-27 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+3. On VM1 and VM2, bind virtio device with vfio-pci driver::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+4. Launch testpmd in VM1::
+
+ ./dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>start
+
+5. Launch testpmd in VM2, sent imix pkts from VM2::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+ testpmd>start tx_first 1
+
+6. Check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ testpmd>show port stats all
+ testpmd>stop
+
+7. Relaunch and start vhost side testpmd with below cmd, change cbdma threshold for one vhost port's cbdma channels::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=64' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+8. Send pkts by testpmd in VM2, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ testpmd>stop
+ testpmd>start tx_first 1
+ testpmd>show port stats all
+ testpmd>stop
+
+9. Rerun step 7-8 for 10 times.
+
+Test Case 10: VM2VM virtio-pmd split ring mergeable path dynamic queue size CBDMA enable with server mode test
+==============================================================================================================
+
+1. Bind 16 cbdma channels to igb_uio driver, then launch the testpmd with 2 vhost ports below commands::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
+ testpmd>vhost enable tx all
+ testpmd>start
+
+2. Launch VM1 and VM2 using qemu5.2.0::
+
+ taskset -c 6-16 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 17-27 /home/qemu-install/qemu-5.2/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+3. On VM1 and VM2, bind virtio device with vfio-pci driver::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+4. Launch testpmd in VM1::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>start
+
+5. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 4 queues (queue0 to queue3) have packets rx/tx::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
+
+6. Relaunch and start vhost side testpmd with eight queues, change cbdma threshold for one vhost port's cbdma channels::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=64' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+7. Send pkts by testpmd in VM2, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ testpmd>stop
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
+
+8. Rerun step 6-7 for 10 times.
+
+Test Case 11: VM2VM virtio-pmd packed ring mergeable path 8 queues CBDMA enable test
+=====================================================================================
+
+1. Bind 16 cbdma channels to igb_uio driver, then launch the testpmd with 2 vhost port and 8 queues by below commands::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>vhost enable tx all
+ testpmd>start
+
+2. Launch VM1 and VM2 with qemu 5.2.0::
+
+ taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 17-27 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+3. On VM1 and VM2, bind virtio device with vfio-pci driver::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+4. Launch testpmd in VM1::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>start
+
+5. Launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,20000,64,256,512,1024,20000
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
+
+6. Quit VM2 and relaunch VM2 with split ring::
+
+ taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+7. Bind virtio device with vfio-pci driver, launch testpmd in VM2 and send imix pkts, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
+
+ modprobe vfio
+ modprobe vfio-pci
+ echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+ ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+ ./testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600
+ testpmd>set mac fwd
+ testpmd>set txpkts 64,256,512,1024,20000,64,256,512,1024,20000
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+ testpmd>stop
--
2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v2] test_plans/vm2vm_virtio_pmd: add three cbdma cases
2021-07-02 17:28 [dts] [PATCH v2] test_plans/vm2vm_virtio_pmd: add three cbdma cases Yinan Wang
@ 2021-07-12 3:04 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2021-07-12 3:04 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Yinan Wang
> Sent: 2021年7月3日 1:28
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v2] test_plans/vm2vm_virtio_pmd: add three cbdma cases
>
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-07-12 3:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-02 17:28 [dts] [PATCH v2] test_plans/vm2vm_virtio_pmd: add three cbdma cases Yinan Wang
2021-07-12 3:04 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).