* [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time
@ 2019-05-16 16:00 zhaomeijuan
2019-05-16 9:26 ` Zhu, ShuaiX
2019-05-22 5:54 ` Tu, Lijuan
0 siblings, 2 replies; 3+ messages in thread
From: zhaomeijuan @ 2019-05-16 16:00 UTC (permalink / raw)
To: dts; +Cc: zhaomeijuan
Signed-off-by: zhaomeijuan <meijuanx.zhao@intel.com>
---
tests/TestSuite_ddp_gtp.py | 59 +++++++++++++++++++++++---------------
1 file changed, 36 insertions(+), 23 deletions(-)
diff --git a/tests/TestSuite_ddp_gtp.py b/tests/TestSuite_ddp_gtp.py
index 0e86c8d..b8f6817 100644
--- a/tests/TestSuite_ddp_gtp.py
+++ b/tests/TestSuite_ddp_gtp.py
@@ -285,6 +285,7 @@ class TestDdpGtp(TestCase):
'flow create 0 ingress pattern eth / ipv4 / udp / \
%s teid is %s / end actions %s / queue index %d / end'
% (tunnel_pkt, correct_teid, port, queue))
+ count = 0
for match_opt in ['matched', 'not matched']:
teid = correct_teid
pkts = []
@@ -294,33 +295,45 @@ class TestDdpGtp(TestCase):
pkts = self.gtp_packets(
type, tunnel_pkt, inner_L3, match_opt, chk, teid)
for packet_type in pkts.keys():
+ count = count + 1
self.tester.scapy_append(
'sendp([%s], iface="%s")'
% (pkts[packet_type], self.tester_intf))
- self.tester.scapy_execute()
- if port is 'pf':
- out = self.dut.get_session_output(timeout=2)
+ self.tester.scapy_execute()
+ if port is 'pf':
+ out = self.dut.get_session_output(timeout=5)
+ else:
+ out = self.vm0_dut.get_session_output(timeout=5)
+ self.verify(
+ count == out.count('port 0/queue %d' % queue),
+ "Failed to receive packet in this queue!!!")
+ if port is 'pf':
+ layerparams = ['L3_', 'TUNNEL_',
+ 'INNER_L3_', 'INNER_L4_']
+ ptypes = packet_type.split('/')
+ other_ptypes = ptypes[1:]
+ if 'IPV6' in ptypes:
+ other_ptypes.insert(0,'IPV4')
else:
- out = self.vm0_dut.get_session_output(timeout=2)
- self.verify(
- "port 0/queue %d" % queue in out,
- "Failed to receive packet in this queue!!!")
-
- if port is 'pf':
- layerparams = ['L3_', 'TUNNEL_',
- 'INNER_L3_', 'INNER_L4_']
- ptypes = packet_type.split('/')
- endparams = ['_EXT_UNKNOWN', '',
- '_EXT_UNKNOWN', '']
- for layerparam, ptype, endparam in zip(
- layerparams, ptypes, endparams):
- layer_type = layerparam + ptype + endparam
- self.verify(
- layer_type in out,
- "Failed to output ptype information!!!")
- if queue != 0 and type is 'fdir':
- self.verify("PKT_RX_FDIR" in out,
- "Failed to test flow director!!!")
+ other_ptypes.insert(0,'IPV6')
+ endparams = ['_EXT_UNKNOWN', '',
+ '_EXT_UNKNOWN', '']
+ for layerparam, ptype, endparam in zip(
+ layerparams, ptypes, endparams):
+ layer_type = layerparam + ptype + endparam
+ self.verify(
+ layer_type in out,
+ "Failed to output ptype information!")
+ for layerparam, ptype, endparam in zip(
+ layerparams, other_ptypes, endparams):
+ layer_type = layerparam + ptype + endparam
+ self.verify(
+ layer_type in out,
+ "Failed to output ptype information!!!")
+ if queue != 0 and type is 'fdir':
+ self.verify(count == out.count("PKT_RX_FDIR"),
+ "Failed to test flow director!!!")
+ count = 0
if teid == wrong_teid or match_opt == 'not matched':
break
chk = 'chksum=0x1234,'
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time
2019-05-16 16:00 [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time zhaomeijuan
@ 2019-05-16 9:26 ` Zhu, ShuaiX
2019-05-22 5:54 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Zhu, ShuaiX @ 2019-05-16 9:26 UTC (permalink / raw)
To: Zhao, MeijuanX, dts; +Cc: Zhao, MeijuanX, Zhu, ShuaiX
Tested-by: Zhu, ShuaiX <shuaix.zhu@intel.com>
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhaomeijuan
> Sent: Friday, May 17, 2019 12:01 AM
> To: dts@dpdk.org
> Cc: Zhao, MeijuanX <meijuanx.zhao@intel.com>
> Subject: [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time
>
> Signed-off-by: zhaomeijuan <meijuanx.zhao@intel.com>
> ---
> tests/TestSuite_ddp_gtp.py | 59 +++++++++++++++++++++++---------------
> 1 file changed, 36 insertions(+), 23 deletions(-)
>
> diff --git a/tests/TestSuite_ddp_gtp.py b/tests/TestSuite_ddp_gtp.py index
> 0e86c8d..b8f6817 100644
> --- a/tests/TestSuite_ddp_gtp.py
> +++ b/tests/TestSuite_ddp_gtp.py
> @@ -285,6 +285,7 @@ class TestDdpGtp(TestCase):
> 'flow create 0 ingress pattern eth / ipv4 / udp / \
> %s teid is %s / end actions %s / queue index %d / end'
> % (tunnel_pkt, correct_teid, port, queue))
> + count = 0
> for match_opt in ['matched', 'not matched']:
> teid = correct_teid
> pkts = []
> @@ -294,33 +295,45 @@ class TestDdpGtp(TestCase):
> pkts = self.gtp_packets(
> type, tunnel_pkt, inner_L3, match_opt, chk,
> teid)
> for packet_type in pkts.keys():
> + count = count + 1
> self.tester.scapy_append(
> 'sendp([%s], iface="%s")'
> % (pkts[packet_type], self.tester_intf))
> - self.tester.scapy_execute()
> - if port is 'pf':
> - out =
> self.dut.get_session_output(timeout=2)
> + self.tester.scapy_execute()
> + if port is 'pf':
> + out = self.dut.get_session_output(timeout=5)
> + else:
> + out =
> self.vm0_dut.get_session_output(timeout=5)
> + self.verify(
> + count == out.count('port 0/queue %d' % queue),
> + "Failed to receive packet in this queue!!!")
> + if port is 'pf':
> + layerparams = ['L3_', 'TUNNEL_',
> + 'INNER_L3_', 'INNER_L4_']
> + ptypes = packet_type.split('/')
> + other_ptypes = ptypes[1:]
> + if 'IPV6' in ptypes:
> + other_ptypes.insert(0,'IPV4')
> else:
> - out =
> self.vm0_dut.get_session_output(timeout=2)
> - self.verify(
> - "port 0/queue %d" % queue in out,
> - "Failed to receive packet in this queue!!!")
> -
> - if port is 'pf':
> - layerparams = ['L3_', 'TUNNEL_',
> - 'INNER_L3_',
> 'INNER_L4_']
> - ptypes = packet_type.split('/')
> - endparams = ['_EXT_UNKNOWN', '',
> - '_EXT_UNKNOWN', '']
> - for layerparam, ptype, endparam in zip(
> - layerparams, ptypes,
> endparams):
> - layer_type = layerparam + ptype +
> endparam
> - self.verify(
> - layer_type in out,
> - "Failed to output ptype
> information!!!")
> - if queue != 0 and type is 'fdir':
> - self.verify("PKT_RX_FDIR" in out,
> - "Failed to test flow
> director!!!")
> + other_ptypes.insert(0,'IPV6')
> + endparams = ['_EXT_UNKNOWN', '',
> + '_EXT_UNKNOWN', '']
> + for layerparam, ptype, endparam in zip(
> + layerparams, ptypes, endparams):
> + layer_type = layerparam + ptype +
> endparam
> + self.verify(
> + layer_type in out,
> + "Failed to output ptype information!")
> + for layerparam, ptype, endparam in zip(
> + layerparams, other_ptypes,
> endparams):
> + layer_type = layerparam + ptype +
> endparam
> + self.verify(
> + layer_type in out,
> + "Failed to output ptype
> information!!!")
> + if queue != 0 and type is 'fdir':
> + self.verify(count == out.count("PKT_RX_FDIR"),
> + "Failed to test flow director!!!")
> + count = 0
> if teid == wrong_teid or match_opt == 'not matched':
> break
> chk = 'chksum=0x1234,'
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time
2019-05-16 16:00 [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time zhaomeijuan
2019-05-16 9:26 ` Zhu, ShuaiX
@ 2019-05-22 5:54 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2019-05-22 5:54 UTC (permalink / raw)
To: Zhao, MeijuanX, dts; +Cc: Zhao, MeijuanX
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhaomeijuan
> Sent: Friday, May 17, 2019 12:01 AM
> To: dts@dpdk.org
> Cc: Zhao, MeijuanX <meijuanx.zhao@intel.com>
> Subject: [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time
>
> Signed-off-by: zhaomeijuan <meijuanx.zhao@intel.com>
> ---
> tests/TestSuite_ddp_gtp.py | 59 +++++++++++++++++++++++---------------
> 1 file changed, 36 insertions(+), 23 deletions(-)
>
> diff --git a/tests/TestSuite_ddp_gtp.py b/tests/TestSuite_ddp_gtp.py index
> 0e86c8d..b8f6817 100644
> --- a/tests/TestSuite_ddp_gtp.py
> +++ b/tests/TestSuite_ddp_gtp.py
> @@ -285,6 +285,7 @@ class TestDdpGtp(TestCase):
> 'flow create 0 ingress pattern eth / ipv4 / udp / \
> %s teid is %s / end actions %s / queue index %d / end'
> % (tunnel_pkt, correct_teid, port, queue))
> + count = 0
> for match_opt in ['matched', 'not matched']:
> teid = correct_teid
> pkts = []
> @@ -294,33 +295,45 @@ class TestDdpGtp(TestCase):
> pkts = self.gtp_packets(
> type, tunnel_pkt, inner_L3, match_opt, chk, teid)
> for packet_type in pkts.keys():
> + count = count + 1
> self.tester.scapy_append(
> 'sendp([%s], iface="%s")'
> % (pkts[packet_type], self.tester_intf))
> - self.tester.scapy_execute()
> - if port is 'pf':
> - out = self.dut.get_session_output(timeout=2)
> + self.tester.scapy_execute()
> + if port is 'pf':
> + out = self.dut.get_session_output(timeout=5)
> + else:
> + out = self.vm0_dut.get_session_output(timeout=5)
> + self.verify(
> + count == out.count('port 0/queue %d' % queue),
> + "Failed to receive packet in this queue!!!")
> + if port is 'pf':
> + layerparams = ['L3_', 'TUNNEL_',
> + 'INNER_L3_', 'INNER_L4_']
> + ptypes = packet_type.split('/')
> + other_ptypes = ptypes[1:]
> + if 'IPV6' in ptypes:
> + other_ptypes.insert(0,'IPV4')
> else:
> - out = self.vm0_dut.get_session_output(timeout=2)
> - self.verify(
> - "port 0/queue %d" % queue in out,
> - "Failed to receive packet in this queue!!!")
> -
> - if port is 'pf':
> - layerparams = ['L3_', 'TUNNEL_',
> - 'INNER_L3_', 'INNER_L4_']
> - ptypes = packet_type.split('/')
> - endparams = ['_EXT_UNKNOWN', '',
> - '_EXT_UNKNOWN', '']
> - for layerparam, ptype, endparam in zip(
> - layerparams, ptypes, endparams):
> - layer_type = layerparam + ptype + endparam
> - self.verify(
> - layer_type in out,
> - "Failed to output ptype information!!!")
> - if queue != 0 and type is 'fdir':
> - self.verify("PKT_RX_FDIR" in out,
> - "Failed to test flow director!!!")
> + other_ptypes.insert(0,'IPV6')
> + endparams = ['_EXT_UNKNOWN', '',
> + '_EXT_UNKNOWN', '']
> + for layerparam, ptype, endparam in zip(
> + layerparams, ptypes, endparams):
> + layer_type = layerparam + ptype + endparam
> + self.verify(
> + layer_type in out,
> + "Failed to output ptype information!")
> + for layerparam, ptype, endparam in zip(
> + layerparams, other_ptypes, endparams):
> + layer_type = layerparam + ptype + endparam
> + self.verify(
> + layer_type in out,
> + "Failed to output ptype information!!!")
> + if queue != 0 and type is 'fdir':
> + self.verify(count == out.count("PKT_RX_FDIR"),
> + "Failed to test flow director!!!")
> + count = 0
> if teid == wrong_teid or match_opt == 'not matched':
> break
> chk = 'chksum=0x1234,'
> --
> 2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-22 5:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-16 16:00 [dts] [PATCH V1] tests/ddp_gtp optimize code to cut running time zhaomeijuan
2019-05-16 9:26 ` Zhu, ShuaiX
2019-05-22 5:54 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).