* [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf test
@ 2019-03-28 20:41 Xinfeng Zhao
2019-04-09 6:44 ` Chen, Zhaoyan
2019-04-15 21:28 ` Tu, Lijuan
0 siblings, 2 replies; 3+ messages in thread
From: Xinfeng Zhao @ 2019-03-28 20:41 UTC (permalink / raw)
To: dts; +Cc: Xinfeng Zhao
Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
---
.../virtio_perf_cryptodev_func_test_plan.rst | 144 +++++++++++++++++++++
1 file changed, 144 insertions(+)
create mode 100644 test_plans/virtio_perf_cryptodev_func_test_plan.rst
diff --git a/test_plans/virtio_perf_cryptodev_func_test_plan.rst b/test_plans/virtio_perf_cryptodev_func_test_plan.rst
new file mode 100644
index 0000000..74d38f6
--- /dev/null
+++ b/test_plans/virtio_perf_cryptodev_func_test_plan.rst
@@ -0,0 +1,144 @@
+.. Copyright (c) <2018-2019> Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=======================================
+Cryptodev virtio Performance Application Tests
+=======================================
+
+
+Description
+===========
+
+This document provides the test plan for testing Cryptodev virtio performance by
+crypto perf application. The crypto perf application is a DPDK app under
+DPDK app folder.
+
+Cryptodev virtio performance supports AESNI MB PMD, VIRTIO PMD
+
+AESNI MB PMD algorithm table
+The table below contains AESNI MB algorithms which supported in crypto virtio perf.
+Part of the algorithms are not supported currently.
+
++-----------+-------------------+---------------------------------------------------------------------------+
+| Algorithm | Mode | Detail |
++-----------+-------------------+---------------------------------------------------------------------------+
+| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits |
++-----------+-------------------+---------------------------------------------------------------------------+
+| sha | | sha1, sha2-224, sha2-384, sha2-256, sha2-512 |
++-----------+-------------------+---------------------------------------------------------------------------+
+| hmac | | Support sha implementations sha1, sha2-224, sha2-256, |
+| | | |
+| | | sha2-384, sha2-512 |
++-----------+-------------------+---------------------------------------------------------------------------+
+
+VIRTIO PMD algorithm table
+The table below contains virtio algorithms which supported in crypto virtio perf.
+Part of the algorithms are not supported currently.
+
++-----------+-------------------+---------------------------------------------------------------------------+
+| Algorithm | Mode | Detail |
++-----------+-------------------+---------------------------------------------------------------------------+
+| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits |
++-----------+-------------------+---------------------------------------------------------------------------+
+| sha | | sha1, sha2-224, sha2-384, sha2-256, sha2-512 |
++-----------+-------------------+---------------------------------------------------------------------------+
+| hmac | | Support sha implementations sha1, sha2-224, sha2-256, |
+| | | |
+| | | sha2-384, sha2-512 |
++-----------+-------------------+---------------------------------------------------------------------------+
+
+
+Prerequisites
+=============
+
+qemu version >= 2.12
+in qemu enable vhost-user-crypto:
+ ./configure --target-list=x86_64-softmmu --enable-vhost-crypto --prefix=/root/qemu-2.12 && make && make install
+the bin is in /root/qemu-2.12 folder, which is your specified
+
+Test case setup:
+================
+
+ +--------------+
+ | +--------+ |
+ | | VM | |
+ | +--------+ |
+ | |
+ | HOST |
+ +--------------+
+
+In Host:
+# Build DPDK and vhost_crypto app
+ enable CONFIG_RTE_LIBRTE_VHOST in config/common_base
+ make install -j T=x86_64-native-linuxapp-gcc
+ make -C examples/vhost_crypto
+
+# Compile the latest qemu
+# Run the dpdk vhost sample
+ ./examples/vhost_crypto/build/vhost-crypto --socket-mem 2048,0 --legacy-mem --vdev crypto_aesni_mb_pmd_1 -l 8,9,10 -n 4 -- --config "(9,0,0),(10,0,0)" --socket-file 9,/tmp/vm0_crypto0.sock --socket-file=10,/tmp/vm0_crypto1.sock
+
+# bind vfio-pci
+ usertools/dpdk-devbind.py --bind=vfio-pci 0000:60:00.0 0000:60:00.1
+
+# Start VM by the qemu
+ taskset -c 11,12,13,14 /root/qemu-2/bin/qemu-system-x86_64 -name vm0
+ -enable-kvm -pidfile /tmp/.vm0.pid
+ -cpu host -smp 4
+ -m 5120 -object memory-backend-file,id=mem,size=5120M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc
+ -net nic,vlan=0,macaddr=00:00:00:18:38:11,model=e1000,addr=1f -net user,vlan=0,hostfwd=tcp:10.67.111.126:6000-:22
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0
+ -device virtio-serial
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0
+ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait
+ -vnc :1
+ -chardev socket,path=/tmp/vm0_crypto0.sock,id=vm0_crypto0 -object cryptodev-vhost-user,id=cryptodev0,chardev=vm0_crypto0 -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0
+ -chardev socket,path=/tmp/vm0_crypto1.sock,id=vm0_crypto1 -object cryptodev-vhost-user,id=cryptodev1,chardev=vm0_crypto1 -device virtio-crypto-pci,id=crypto1,cryptodev=cryptodev1
+ -drive file=/root/VMs/virtio_crypto_test_710_1.img
+ -device vfio-pci,host=0000:60:00.0,id=pt_0
+ -device vfio-pci,host=0000:60:00.1,id=pt_1
+
+In VM:
+# set virtio device
+ modprobe uio_pci_generic
+ echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
+ echo -n 0000:00:05.0 > /sys/bus/pci/drivers/virtio-pci/unbind
+ echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
+
+# Run the virtio performance test cases
+
+ 1. The AESNI_MB case Command line Eg:
+
+ ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_aesni_mb_pmd -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
+
+ 2. The VIRTIO case Command line Eg:
+
+ ./build/app/dpdk-test-crypto-perf -c 0xf -w 00:05.0 -- --ptest throughput --devtype crypto_qat --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
--
2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf test
2019-03-28 20:41 [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf test Xinfeng Zhao
@ 2019-04-09 6:44 ` Chen, Zhaoyan
2019-04-15 21:28 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Chen, Zhaoyan @ 2019-04-09 6:44 UTC (permalink / raw)
To: Zhao, XinfengX, dts; +Cc: Zhao, XinfengX, Chen, Zhaoyan
Acked-by: Zhaoyan, Chen <zhaoyan.chen@intel.com>
Regards,
Zhaoyan Chen
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Friday, March 29, 2019 4:42 AM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf test
>
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
> .../virtio_perf_cryptodev_func_test_plan.rst | 144 +++++++++++++++++++++
> 1 file changed, 144 insertions(+)
> create mode 100644 test_plans/virtio_perf_cryptodev_func_test_plan.rst
>
> diff --git a/test_plans/virtio_perf_cryptodev_func_test_plan.rst
> b/test_plans/virtio_perf_cryptodev_func_test_plan.rst
> new file mode 100644
> index 0000000..74d38f6
> --- /dev/null
> +++ b/test_plans/virtio_perf_cryptodev_func_test_plan.rst
> @@ -0,0 +1,144 @@
> +.. Copyright (c) <2018-2019> Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=======================================
> +Cryptodev virtio Performance Application Tests
> +=======================================
> +
> +
> +Description
> +===========
> +
> +This document provides the test plan for testing Cryptodev virtio
> +performance by crypto perf application. The crypto perf application is
> +a DPDK app under DPDK app folder.
> +
> +Cryptodev virtio performance supports AESNI MB PMD, VIRTIO PMD
> +
> +AESNI MB PMD algorithm table
> +The table below contains AESNI MB algorithms which supported in crypto virtio
> perf.
> +Part of the algorithms are not supported currently.
> +
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| Algorithm | Mode | Detail |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| sha | | sha1, sha2-224, sha2-384, sha2-256, sha2-512 |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| hmac | | Support sha implementations sha1, sha2-224, sha2-256,
> |
> +| | | |
> +| | | sha2-384, sha2-512 |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +
> +VIRTIO PMD algorithm table
> +The table below contains virtio algorithms which supported in crypto virtio perf.
> +Part of the algorithms are not supported currently.
> +
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| Algorithm | Mode | Detail |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| sha | | sha1, sha2-224, sha2-384, sha2-256, sha2-512 |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +| hmac | | Support sha implementations sha1, sha2-224, sha2-256,
> |
> +| | | |
> +| | | sha2-384, sha2-512 |
> ++-----------+-------------------+-------------------------------------------------------------------
> --------+
> +
> +
> +Prerequisites
> +=============
> +
> +qemu version >= 2.12
> +in qemu enable vhost-user-crypto:
> + ./configure --target-list=x86_64-softmmu --enable-vhost-crypto
> +--prefix=/root/qemu-2.12 && make && make install the bin is in
> +/root/qemu-2.12 folder, which is your specified
> +
> +Test case setup:
> +================
> +
> + +--------------+
> + | +--------+ |
> + | | VM | |
> + | +--------+ |
> + | |
> + | HOST |
> + +--------------+
> +
> +In Host:
> +# Build DPDK and vhost_crypto app
> + enable CONFIG_RTE_LIBRTE_VHOST in config/common_base
> + make install -j T=x86_64-native-linuxapp-gcc
> + make -C examples/vhost_crypto
> +
> +# Compile the latest qemu
> +# Run the dpdk vhost sample
> + ./examples/vhost_crypto/build/vhost-crypto --socket-mem 2048,0
> +--legacy-mem --vdev crypto_aesni_mb_pmd_1 -l 8,9,10 -n 4 -- --config
> +"(9,0,0),(10,0,0)" --socket-file 9,/tmp/vm0_crypto0.sock
> +--socket-file=10,/tmp/vm0_crypto1.sock
> +
> +# bind vfio-pci
> + usertools/dpdk-devbind.py --bind=vfio-pci 0000:60:00.0 0000:60:00.1
> +
> +# Start VM by the qemu
> + taskset -c 11,12,13,14 /root/qemu-2/bin/qemu-system-x86_64 -name vm0
> + -enable-kvm -pidfile /tmp/.vm0.pid
> + -cpu host -smp 4
> + -m 5120 -object memory-backend-file,id=mem,size=5120M,mem-
> path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc
> + -net nic,vlan=0,macaddr=00:00:00:18:38:11,model=e1000,addr=1f -net
> user,vlan=0,hostfwd=tcp:10.67.111.126:6000-:22
> + -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0
> + -device virtio-serial
> + -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0
> + -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait
> + -vnc :1
> + -chardev socket,path=/tmp/vm0_crypto0.sock,id=vm0_crypto0 -object
> cryptodev-vhost-user,id=cryptodev0,chardev=vm0_crypto0 -device virtio-crypto-
> pci,id=crypto0,cryptodev=cryptodev0
> + -chardev socket,path=/tmp/vm0_crypto1.sock,id=vm0_crypto1 -object
> cryptodev-vhost-user,id=cryptodev1,chardev=vm0_crypto1 -device virtio-crypto-
> pci,id=crypto1,cryptodev=cryptodev1
> + -drive file=/root/VMs/virtio_crypto_test_710_1.img
> + -device vfio-pci,host=0000:60:00.0,id=pt_0
> + -device vfio-pci,host=0000:60:00.1,id=pt_1
> +
> +In VM:
> +# set virtio device
> + modprobe uio_pci_generic
> + echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo -n 0000:00:05.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> +
> +# Run the virtio performance test cases
> +
> + 1. The AESNI_MB case Command line Eg:
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_aesni_mb_pmd
> + -- --ptest throughput --devtype crypto_aesni_mb --optype
> + cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt
> + --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op
> + generate --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20
> + --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
> +
> + 2. The VIRTIO case Command line Eg:
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf -w 00:05.0 -- --ptest
> + throughput --devtype crypto_qat --optype cipher-then-auth
> + --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16
> + --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate
> + --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --burst-
> sz 32 --buffer-sz 1024
> --
> 2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf test
2019-03-28 20:41 [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf test Xinfeng Zhao
2019-04-09 6:44 ` Chen, Zhaoyan
@ 2019-04-15 21:28 ` Tu, Lijuan
1 sibling, 0 replies; 3+ messages in thread
From: Tu, Lijuan @ 2019-04-15 21:28 UTC (permalink / raw)
To: Zhao, XinfengX, dts; +Cc: Zhao, XinfengX
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xinfeng Zhao
> Sent: Thursday, March 28, 2019 1:42 PM
> To: dts@dpdk.org
> Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
> Subject: [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf
> test
>
> Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
> ---
> .../virtio_perf_cryptodev_func_test_plan.rst | 144
> +++++++++++++++++++++
> 1 file changed, 144 insertions(+)
> create mode 100644 test_plans/virtio_perf_cryptodev_func_test_plan.rst
>
> diff --git a/test_plans/virtio_perf_cryptodev_func_test_plan.rst
> b/test_plans/virtio_perf_cryptodev_func_test_plan.rst
> new file mode 100644
> index 0000000..74d38f6
> --- /dev/null
> +++ b/test_plans/virtio_perf_cryptodev_func_test_plan.rst
> @@ -0,0 +1,144 @@
> +.. Copyright (c) <2018-2019> Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +=======================================
> +Cryptodev virtio Performance Application Tests
> +=======================================
> +
> +
> +Description
> +===========
> +
> +This document provides the test plan for testing Cryptodev virtio
> +performance by crypto perf application. The crypto perf application is
> +a DPDK app under DPDK app folder.
> +
> +Cryptodev virtio performance supports AESNI MB PMD, VIRTIO PMD
> +
> +AESNI MB PMD algorithm table
> +The table below contains AESNI MB algorithms which supported in crypto
> virtio perf.
> +Part of the algorithms are not supported currently.
> +
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| Algorithm | Mode | Detail
> |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| sha | | sha1, sha2-224, sha2-384, sha2-256, sha2-512
> |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| hmac | | Support sha implementations sha1, sha2-224,
> sha2-256, |
> +| | | |
> +| | | sha2-384, sha2-512 |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +
> +VIRTIO PMD algorithm table
> +The table below contains virtio algorithms which supported in crypto virtio
> perf.
> +Part of the algorithms are not supported currently.
> +
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| Algorithm | Mode | Detail
> |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| aes | cbc | Encrypt/Decrypt;Key size: 128, 192, 256 bits
> |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| sha | | sha1, sha2-224, sha2-384, sha2-256, sha2-512
> |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +| hmac | | Support sha implementations sha1, sha2-224,
> sha2-256, |
> +| | | |
> +| | | sha2-384, sha2-512 |
> ++-----------+-------------------+-----------------------------------------------------------------------
> ----+
> +
> +
> +Prerequisites
> +=============
> +
> +qemu version >= 2.12
> +in qemu enable vhost-user-crypto:
> + ./configure --target-list=x86_64-softmmu --enable-vhost-crypto
> +--prefix=/root/qemu-2.12 && make && make install the bin is in
> +/root/qemu-2.12 folder, which is your specified
> +
> +Test case setup:
> +================
> +
> + +--------------+
> + | +--------+ |
> + | | VM | |
> + | +--------+ |
> + | |
> + | HOST |
> + +--------------+
> +
> +In Host:
> +# Build DPDK and vhost_crypto app
> + enable CONFIG_RTE_LIBRTE_VHOST in config/common_base
> + make install -j T=x86_64-native-linuxapp-gcc
> + make -C examples/vhost_crypto
> +
> +# Compile the latest qemu
> +# Run the dpdk vhost sample
> + ./examples/vhost_crypto/build/vhost-crypto --socket-mem 2048,0
> +--legacy-mem --vdev crypto_aesni_mb_pmd_1 -l 8,9,10 -n 4 -- --config
> +"(9,0,0),(10,0,0)" --socket-file 9,/tmp/vm0_crypto0.sock
> +--socket-file=10,/tmp/vm0_crypto1.sock
> +
> +# bind vfio-pci
> + usertools/dpdk-devbind.py --bind=vfio-pci 0000:60:00.0 0000:60:00.1
> +
> +# Start VM by the qemu
> + taskset -c 11,12,13,14 /root/qemu-2/bin/qemu-system-x86_64 -name
> vm0
> + -enable-kvm -pidfile /tmp/.vm0.pid
> + -cpu host -smp 4
> + -m 5120 -object memory-backend-file,id=mem,size=5120M,mem-
> path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc
> + -net nic,vlan=0,macaddr=00:00:00:18:38:11,model=e1000,addr=1f -net
> user,vlan=0,hostfwd=tcp:10.67.111.126:6000-:22
> + -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0
> + -device virtio-serial
> + -device
> virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0
> + -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait
> + -vnc :1
> + -chardev socket,path=/tmp/vm0_crypto0.sock,id=vm0_crypto0 -object
> cryptodev-vhost-user,id=cryptodev0,chardev=vm0_crypto0 -device virtio-
> crypto-pci,id=crypto0,cryptodev=cryptodev0
> + -chardev socket,path=/tmp/vm0_crypto1.sock,id=vm0_crypto1 -object
> cryptodev-vhost-user,id=cryptodev1,chardev=vm0_crypto1 -device virtio-
> crypto-pci,id=crypto1,cryptodev=cryptodev1
> + -drive file=/root/VMs/virtio_crypto_test_710_1.img
> + -device vfio-pci,host=0000:60:00.0,id=pt_0
> + -device vfio-pci,host=0000:60:00.1,id=pt_1
> +
> +In VM:
> +# set virtio device
> + modprobe uio_pci_generic
> + echo -n 0000:00:04.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo -n 0000:00:05.0 > /sys/bus/pci/drivers/virtio-pci/unbind
> + echo "1af4 1054" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> +
> +# Run the virtio performance test cases
> +
> + 1. The AESNI_MB case Command line Eg:
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf --vdev crypto_aesni_mb_pmd
> + -- --ptest throughput --devtype crypto_aesni_mb --optype
> + cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt
> + --cipher-key-sz 16 --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op
> + generate --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20
> + --total-ops 10000000 --burst-sz 32 --buffer-sz 1024
> +
> + 2. The VIRTIO case Command line Eg:
> +
> + ./build/app/dpdk-test-crypto-perf -c 0xf -w 00:05.0 -- --ptest
> + throughput --devtype crypto_qat --optype cipher-then-auth
> + --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16
> + --cipher-iv-sz 16 --auth-algo sha1-hmac --auth-op generate
> + --auth-key-sz 64 --auth-aad-sz 0 --auth-digest-sz 20 --total-ops 10000000 --
> burst-sz 32 --buffer-sz 1024
> --
> 2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-04-15 21:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-28 20:41 [dts] [PATCH V1] test_plan: add test plan for cryptodev virtio perf test Xinfeng Zhao
2019-04-09 6:44 ` Chen, Zhaoyan
2019-04-15 21:28 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).