* [dts] [PATCH V3]test_plan: add vf l3fwd performance test plan
@ 2019-05-14 16:24 hanyingya
2019-05-22 5:28 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: hanyingya @ 2019-05-14 16:24 UTC (permalink / raw)
To: dts; +Cc: hanyingya
Signed-off-by: hanyingya <yingyax.han@intel.com>
---
test_plans/vf_l3fwd_test_plan.rst | 176 ++++++++++++++++++++++++++++++
1 file changed, 176 insertions(+)
create mode 100644 test_plans/vf_l3fwd_test_plan.rst
diff --git a/test_plans/vf_l3fwd_test_plan.rst b/test_plans/vf_l3fwd_test_plan.rst
new file mode 100644
index 0000000..97e3ab7
--- /dev/null
+++ b/test_plans/vf_l3fwd_test_plan.rst
@@ -0,0 +1,176 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+==================================
+VF L3 Forwarding Performance Tests
+==================================
+
+This document provides benchmark test for NIC VFs which are created from
+kernel PFs or DPDK PFs. These tests use l3fwd as a simple forwarder
+between NIC vfs. The goal of this test plan is to have a tested benchmark
+between NIC vfs.
+
+
+Prerequisites
+==============
+
+* Hardware requirements:
+
+ * XL710, XXV710: 2 ports from 2 NICs, 1 port per NIC, 2 cores & 2 queues per VF.
+
+ ::
+
+ +------------------------------+
+ | DUT | TESTER |
+ +==============================+
+ | NIC-1,Port-1 --- TG,Port-1 |
+ | NIC-2,Port-1 --- TG,Port-2 |
+ +------------------------------+
+
+
+ * X710: 4 ports from 1 NIC, 1 core 1 queues per port.
+
+ ::
+
+ +------------------------------+
+ | DUT | TESTER |
+ +==============================+
+ | NIC-1,Port-1 --- TG,Port-1 |
+ | NIC-1,Port-2 --- TG,Port-2 |
+ | NIC-1,Port-3 --- TG,Port-3 |
+ | NIC-1,Port-4 --- TG,Port-4 |
+ +------------------------------+
+
+ * 825992: 2 ports from 2 NIC, 1 core 1 queues per port.
+
+ ::
+
+ + -----------------------------+
+ | DUT | TESTER |
+ +==============================+
+ | NIC-1,Port-1 --- TG,Port-1 |
+ | NIC-2,Port-1 --- TG,Port-2 |
+ +------------------------------+
+
+==============
+Setup overview
+==============
+
+Set up topology as above based on the NIC used.
+
+Test Case 1: Measure performance with kernel PF & dpdk VF
+========================================================
+
+1, Bind PF ports to kernel driver, i40e or ixgbe, then create 1 VF from each PF,
+take XL710 for example::
+
+ echo 1 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs
+ echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/sriov_numvfs
+
+2, Set vf mac address::
+
+ ip link set ens5f0 vf 0 mac 00:12:34:56:78:01
+ ip link set ens5f1 vf 0 mac 00:12:34:56:78:02
+
+3, Bind all the created VFs to dpdk driver, igb_uio or vfio-pci::
+
+ ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
+
+4, Start dpdk l3fwd with 1:1 matched cores and queues::
+
+ ./examples/l3fwd/build/l3fwd -c 0xf -n 4 -- -p 0x3 --config '(0,0,0),(1,0,1),(0,1,2),(1,1,3)'
+
+5, Send packet with frame size from 64bytes to 1518bytes with ixia traffic generator,
+make sure your traffic configuration meets LPM rules, and will go to all queues, all ports.
+Fill out this table with results.
+
++-------+------+--------+-----------+
+| Frame | mode | Mpps | %linerate |
++=======+======+========+===========+
+| 64 | lpm | | |
++-------+------+--------+-----------+
+| 128 | lpm | | |
++-------+------+--------+-----------+
+| 256 | lpm | | |
++-------+------+--------+-----------+
+| 512 | lpm | | |
++-------+------+--------+-----------+
+| 1024 | lpm | | |
++-------+------+--------+-----------+
+| 1518 | lpm | | |
++-------+------+--------+-----------+
+
+
+Test Case 2: Measure performance with dpdk PF & dpdk VF
+======================================================
+
+1, Bind PF ports to igb_uio driver, then create 1 VF from each PF,
+take XL710 for example::
+
+ ./usertools/dpdk-devbind.py -b igb_uio 18:00.0 18:00.1
+ echo 1 > /sys/bus/pci/devices/0000\:18\:00.0/max_vfs
+ echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/max_vfs
+
+2, Bind the two created VFs to dpdk driver, igb_uio or vfio-pci::
+
+ ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
+
+3, Start testpmd and set vfs mac address::
+
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem=1024,1024 --file-prefix=pf -b 0000:18:02.0 -b 0000:18:06.0 -- -i
+ testpmd>set vf mac addr 0 0 00:12:34:56:78:01
+ testpmd>set vf mac addr 1 0 00:12:34:56:78:02
+
+4, Start dpdk l3fwd with 1:1 matched cores and queues::
+
+ ./examples/l3fwd/build/l3fwd -c 0x3c -n 4 -w 0000:18:02.0 -w 0000:18:06.0 -- -p 0x3 --config '(0,0,2),(1,0,3),(0,1,4),(1,1,5)'
+
+5, Send packet with frame size from 64bytes to 1518bytes with ixia traffic generator,
+make sure your traffic configuration meets LPM rules, and will go to all queues, all ports.
+Fill out this table with results.
+
++-------+------+--------+-----------+
+| Frame | mode | Mpps | %linerate |
++=======+======+========+===========+
+| 64 | lpm | | |
++-------+------+--------+-----------+
+| 128 | lpm | | |
++-------+------+--------+-----------+
+| 256 | lpm | | |
++-------+------+--------+-----------+
+| 512 | lpm | | |
++-------+------+--------+-----------+
+| 1024 | lpm | | |
++-------+------+--------+-----------+
+| 1518 | lpm | | |
++-------+------+--------+-----------+
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH V3]test_plan: add vf l3fwd performance test plan
2019-05-14 16:24 [dts] [PATCH V3]test_plan: add vf l3fwd performance test plan hanyingya
@ 2019-05-22 5:28 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-05-22 5:28 UTC (permalink / raw)
To: Han, YingyaX, dts; +Cc: Han, YingyaX
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of hanyingya
> Sent: Wednesday, May 15, 2019 12:25 AM
> To: dts@dpdk.org
> Cc: Han, YingyaX <yingyax.han@intel.com>
> Subject: [dts] [PATCH V3]test_plan: add vf l3fwd performance test plan
>
> Signed-off-by: hanyingya <yingyax.han@intel.com>
> ---
> test_plans/vf_l3fwd_test_plan.rst | 176 ++++++++++++++++++++++++++++++
> 1 file changed, 176 insertions(+)
> create mode 100644 test_plans/vf_l3fwd_test_plan.rst
>
> diff --git a/test_plans/vf_l3fwd_test_plan.rst
> b/test_plans/vf_l3fwd_test_plan.rst
> new file mode 100644
> index 0000000..97e3ab7
> --- /dev/null
> +++ b/test_plans/vf_l3fwd_test_plan.rst
> @@ -0,0 +1,176 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +==================================
> +VF L3 Forwarding Performance Tests
> +==================================
> +
> +This document provides benchmark test for NIC VFs which are created
> +from kernel PFs or DPDK PFs. These tests use l3fwd as a simple
> +forwarder between NIC vfs. The goal of this test plan is to have a
> +tested benchmark between NIC vfs.
> +
> +
> +Prerequisites
> +==============
> +
> +* Hardware requirements:
> +
> + * XL710, XXV710: 2 ports from 2 NICs, 1 port per NIC, 2 cores & 2 queues
> per VF.
> +
> + ::
> +
> + +------------------------------+
> + | DUT | TESTER |
> + +==============================+
> + | NIC-1,Port-1 --- TG,Port-1 |
> + | NIC-2,Port-1 --- TG,Port-2 |
> + +------------------------------+
> +
> +
> + * X710: 4 ports from 1 NIC, 1 core 1 queues per port.
> +
> + ::
> +
> + +------------------------------+
> + | DUT | TESTER |
> + +==============================+
> + | NIC-1,Port-1 --- TG,Port-1 |
> + | NIC-1,Port-2 --- TG,Port-2 |
> + | NIC-1,Port-3 --- TG,Port-3 |
> + | NIC-1,Port-4 --- TG,Port-4 |
> + +------------------------------+
> +
> + * 825992: 2 ports from 2 NIC, 1 core 1 queues per port.
> +
> + ::
> +
> + + -----------------------------+
> + | DUT | TESTER |
> + +==============================+
> + | NIC-1,Port-1 --- TG,Port-1 |
> + | NIC-2,Port-1 --- TG,Port-2 |
> + +------------------------------+
> +
> +==============
> +Setup overview
> +==============
> +
> +Set up topology as above based on the NIC used.
> +
> +Test Case 1: Measure performance with kernel PF & dpdk VF
> +========================================================
> +
> +1, Bind PF ports to kernel driver, i40e or ixgbe, then create 1 VF from
> +each PF, take XL710 for example::
> +
> + echo 1 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs
> + echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/sriov_numvfs
> +
> +2, Set vf mac address::
> +
> + ip link set ens5f0 vf 0 mac 00:12:34:56:78:01 ip link set ens5f1 vf
> + 0 mac 00:12:34:56:78:02
> +
> +3, Bind all the created VFs to dpdk driver, igb_uio or vfio-pci::
> +
> + ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
> +
> +4, Start dpdk l3fwd with 1:1 matched cores and queues::
> +
> + ./examples/l3fwd/build/l3fwd -c 0xf -n 4 -- -p 0x3 --config
> '(0,0,0),(1,0,1),(0,1,2),(1,1,3)'
> +
> +5, Send packet with frame size from 64bytes to 1518bytes with ixia
> +traffic generator, make sure your traffic configuration meets LPM rules, and
> will go to all queues, all ports.
> +Fill out this table with results.
> +
> ++-------+------+--------+-----------+
> +| Frame | mode | Mpps | %linerate |
> ++=======+======+========+===========+
> +| 64 | lpm | | |
> ++-------+------+--------+-----------+
> +| 128 | lpm | | |
> ++-------+------+--------+-----------+
> +| 256 | lpm | | |
> ++-------+------+--------+-----------+
> +| 512 | lpm | | |
> ++-------+------+--------+-----------+
> +| 1024 | lpm | | |
> ++-------+------+--------+-----------+
> +| 1518 | lpm | | |
> ++-------+------+--------+-----------+
> +
> +
> +Test Case 2: Measure performance with dpdk PF & dpdk VF
> +======================================================
> +
> +1, Bind PF ports to igb_uio driver, then create 1 VF from each PF, take
> +XL710 for example::
> +
> + ./usertools/dpdk-devbind.py -b igb_uio 18:00.0 18:00.1 echo 1 >
> + /sys/bus/pci/devices/0000\:18\:00.0/max_vfs
> + echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/max_vfs
> +
> +2, Bind the two created VFs to dpdk driver, igb_uio or vfio-pci::
> +
> + ./usertools/dpdk-devbind.py -b igb_uio 18:02.0 18:06.0
> +
> +3, Start testpmd and set vfs mac address::
> +
> + ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4
> + --socket-mem=1024,1024 --file-prefix=pf -b 0000:18:02.0 -b
> + 0000:18:06.0 -- -i testpmd>set vf mac addr 0 0 00:12:34:56:78:01
> + testpmd>set vf mac addr 1 0 00:12:34:56:78:02
> +
> +4, Start dpdk l3fwd with 1:1 matched cores and queues::
> +
> + ./examples/l3fwd/build/l3fwd -c 0x3c -n 4 -w 0000:18:02.0 -w 0000:18:06.0
> -- -p 0x3 --config '(0,0,2),(1,0,3),(0,1,4),(1,1,5)'
> +
> +5, Send packet with frame size from 64bytes to 1518bytes with ixia
> +traffic generator, make sure your traffic configuration meets LPM rules, and
> will go to all queues, all ports.
> +Fill out this table with results.
> +
> ++-------+------+--------+-----------+
> +| Frame | mode | Mpps | %linerate |
> ++=======+======+========+===========+
> +| 64 | lpm | | |
> ++-------+------+--------+-----------+
> +| 128 | lpm | | |
> ++-------+------+--------+-----------+
> +| 256 | lpm | | |
> ++-------+------+--------+-----------+
> +| 512 | lpm | | |
> ++-------+------+--------+-----------+
> +| 1024 | lpm | | |
> ++-------+------+--------+-----------+
> +| 1518 | lpm | | |
> ++-------+------+--------+-----------+
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-05-22 5:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-14 16:24 [dts] [PATCH V3]test_plan: add vf l3fwd performance test plan hanyingya
2019-05-22 5:28 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).