From: fengchengwen <fengchengwen@huawei.com>
To: Jie Hai <haijie1@huawei.com>, <dev@dpdk.org>
Cc: <lihuisong@huawei.com>, <liuyonglong@huawei.com>,
<huangdengdui@huawei.com>, <ferruh.yigit@amd.com>
Subject: Re: [PATCH v4 2/7] ethdev: add telemetry cmd for registers
Date: Mon, 26 Feb 2024 17:09:44 +0800 [thread overview]
Message-ID: <f7af7394-e7e2-41e0-2148-349cdeef9e94@huawei.com> (raw)
In-Reply-To: <20240226030739.3775514-3-haijie1@huawei.com>
Hi Jie,
On 2024/2/26 11:07, Jie Hai wrote:
> This patch adds a telemetry command for registers dump,
> and supports get registers with specified names.
> The length of the string exported by telemetry is limited
> by MAX_OUTPUT_LEN. Therefore, the filter should be more
> precise.
>
> An example usage is shown below:
> --> /ethdev/regs,0,INTR
> {
> "/ethdev/regs": {
> "registers_length": 318,
> "registers_width": 4,
> "register_offset": "0x0",
> "version": "0x1140011",
> "group_0": {
> "HNS3_CMDQ_INTR_STS_REG": "0x0",
> "HNS3_CMDQ_INTR_EN_REG": "0x2",
> "HNS3_CMDQ_INTR_GEN_REG": "0x0",
> "queue_0_HNS3_TQP_INTR_CTRL_REG": "0x0",
> "queue_0_HNS3_TQP_INTR_GL0_REG": "0xa",
> "queue_0_HNS3_TQP_INTR_GL1_REG": "0xa",
> "queue_0_HNS3_TQP_INTR_GL2_REG": "0x0",
> ...
> },
> "group_1": {
> ...
> },
> ...
> }
>
> or as below if the number of registers not exceed the
> RTE_TEL_MAX_DICT_ENTRIES:
> --> /ethdev/regs,0,ppp
> {
> "/ethdev/regs": {
> "registers_length": 156,
> "registers_width": 4,
> "register_offset": "0x0",
> "version": "0x1140011",
> "ppp_key_drop_num": "0x0",
> "ppp_rlt_drop_num": "0x0",
> "ssu_ppp_mac_key_num_l": "0x1",
> "ssu_ppp_mac_key_num_h": "0x0",
> "ssu_ppp_host_key_num_l": "0x1",
> "ssu_ppp_host_key_num_h": "0x0",
> "ppp_ssu_mac_rlt_num_l": "0x1",
> ...
> }
> }
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> ---
> lib/ethdev/rte_ethdev_telemetry.c | 126 ++++++++++++++++++++++++++++++
> 1 file changed, 126 insertions(+)
>
> diff --git a/lib/ethdev/rte_ethdev_telemetry.c b/lib/ethdev/rte_ethdev_telemetry.c
> index 6b873e7abe68..f1ebb2fae632 100644
> --- a/lib/ethdev/rte_ethdev_telemetry.c
> +++ b/lib/ethdev/rte_ethdev_telemetry.c
> @@ -5,6 +5,7 @@
> #include <ctype.h>
> #include <stdlib.h>
>
> +#include <rte_malloc.h>
> #include <rte_kvargs.h>
> #include <rte_telemetry.h>
>
> @@ -1395,6 +1396,129 @@ eth_dev_handle_port_tm_node_caps(const char *cmd __rte_unused,
> return ret;
> }
>
> +static int
> +eth_dev_store_regs(struct rte_tel_data *d, struct rte_dev_reg_info *reg_info)
> +{
> + struct rte_tel_data *groups[RTE_TEL_MAX_DICT_ENTRIES] = {NULL};
no need zero.
> + char group_name[RTE_TEL_MAX_STRING_LEN] = {0};
> + struct rte_tel_data *group = NULL;
> + uint32_t grp_num = 0;
> + uint32_t *data;
> + int ret = 0;
> + uint32_t i;
> +
> + rte_tel_data_start_dict(d);
> + rte_tel_data_add_dict_uint(d, "register_length", reg_info->length);
> + rte_tel_data_add_dict_uint(d, "register_width", reg_info->width);
> + rte_tel_data_add_dict_uint_hex(d, "register_offset", reg_info->offset, 0);
> + rte_tel_data_add_dict_uint_hex(d, "version", reg_info->version, 0);
> +
> + data = reg_info->data;
> + if (reg_info->length <= RTE_TEL_MAX_DICT_ENTRIES) {
> + for (i = 0; i < reg_info->length; i++, data++)
> + rte_tel_data_add_dict_uint_hex(d,
> + reg_info->names[i].name, *data, 0);
The above format is OK for reg_info->width==4.
There maybe reg_info->width == 8, pls support it.
> + return 0;
> + }
> +
> + for (i = 0; i < reg_info->length; i++, data++) {
> + if (i % RTE_TEL_MAX_DICT_ENTRIES == 0) {
> + if (i != 0)
> + rte_tel_data_add_dict_container(d, group_name,
> + group, 0);
> +
> + group = rte_tel_data_alloc();
> + if (group == NULL) {
> + ret = -ENOMEM;
> + goto out;
> + }
> + rte_tel_data_start_dict(group);
> + snprintf(group_name, RTE_TEL_MAX_STRING_LEN,
> + "group_%u", grp_num);
grp_num + 1 ?
> + if (grp_num >= RTE_TEL_MAX_DICT_ENTRIES) {
> + RTE_ETHDEV_LOG_LINE(NOTICE,
> + "Too many regs, please filter");
how about add more descrip: stop format!
> + return 0;
this group's memory was leak.
How about move the extream case before for loop:
uint32_t length = reg_info->lenght;
if (length > RTE_TEL_MAX_DICT_ENTRIES * RTE_TEL_MAX_DICT_ENTRIES) {
LOG(xxx);
length = RTE_TEL_MAX_DICT_ENTRIES * RTE_TEL_MAX_DICT_ENTRIES;
}
> + }
> + groups[grp_num++] = group;
> + }
> + rte_tel_data_add_dict_uint_hex(group, reg_info->names[i].name,
> + *data, 0);
> + }
> + if (i % RTE_TEL_MAX_DICT_ENTRIES != 0)
> + rte_tel_data_add_dict_container(d, group_name, group, 0);
how about move all add dict in here.
for (i = 0; i < grp_num; i++) {
snprintf(group_name, xxx);
rte_tel_data_add_dict_container(d, group_name, group[i], 0);
}
> +
> + return 0;
> +out:
> + for (i = 0; i < grp_num; i++)
> + rte_tel_data_free(groups[i]);
> +
> + return ret;
> +}
> +
> +static int
> +eth_dev_get_port_regs(int port_id, struct rte_tel_data *d, char *filter)
> +{
> + struct rte_dev_reg_info reg_info;
> + int ret;
> +
> + memset(®_info, 0, sizeof(reg_info));
> + reg_info.filter = filter;
> +
> + ret = rte_eth_dev_get_reg_info_ext(port_id, ®_info);
> + if (ret != 0) {
> + RTE_ETHDEV_LOG_LINE(ERR,
> + "Error getting device reg info: %d", ret);
> + return ret;
> + }
> +
> + reg_info.data = calloc(reg_info.length, reg_info.width);
> + if (!reg_info.data)
pls use if (reg_info.data == NULL), and add error log
> + return -ENOMEM;
> +
> + reg_info.names = calloc(reg_info.length, sizeof(struct rte_eth_reg_name));
> + if (!reg_info.names) {
pls use if (reg_info.names == NULL), and add error log
> + free(reg_info.data);
> + return -ENOMEM;
> + }
> +
> + ret = rte_eth_dev_get_reg_info_ext(port_id, ®_info);
> + if (ret != 0) {
> + RTE_ETHDEV_LOG_LINE(ERR,
> + "Error getting regs from device: %d", ret);
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + ret = eth_dev_store_regs(d, ®_info);
> +out:
> + free(reg_info.data);
> + free(reg_info.names);
> +
> + return ret;
> +}
> +
> +static int
> +eth_dev_handle_port_regs(const char *cmd __rte_unused,
> + const char *params,
> + struct rte_tel_data *d)
> +{
> + char *filter = NULL;
> + uint16_t port_id;
> + char *end_param;
> + int ret;
> +
> + ret = eth_dev_parse_port_params(params, &port_id, &end_param, true);
> + if (ret != 0)
> + return ret;
> +
> + filter = strtok(end_param, ",");
> + if (filter != NULL && strlen(filter) == 0)
> + filter = NULL;
> +
> + return eth_dev_get_port_regs(port_id, d, filter);
> +}
> +
> RTE_INIT(ethdev_init_telemetry)
> {
> rte_telemetry_register_cmd("/ethdev/list", eth_dev_handle_port_list,
> @@ -1436,4 +1560,6 @@ RTE_INIT(ethdev_init_telemetry)
> "Returns TM Level Capabilities info for a port. Parameters: int port_id, int level_id (see tm_capability for the max)");
> rte_telemetry_register_cmd("/ethdev/tm_node_capability", eth_dev_handle_port_tm_node_caps,
> "Returns TM Node Capabilities info for a port. Parameters: int port_id, int node_id (see tm_capability for the max)");
> + rte_telemetry_register_cmd("/ethdev/regs", eth_dev_handle_port_regs,
> + "Returns regs for a port. Parameters: int port_id, string filter");
> }
>
next prev parent reply other threads:[~2024-02-26 9:09 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 1:56 [PATCH] ethdev: add dump regs for telemetry Jie Hai
2023-12-14 12:49 ` Ferruh Yigit
2024-01-09 2:19 ` Jie Hai
2024-01-09 2:41 ` Jie Hai
2024-01-09 18:06 ` Ferruh Yigit
2024-01-10 1:38 ` fengchengwen
2024-01-10 12:15 ` Ferruh Yigit
2024-01-10 14:09 ` Thomas Monjalon
2024-01-10 15:48 ` Ferruh Yigit
2024-01-11 1:55 ` fengchengwen
2024-01-11 11:11 ` Ferruh Yigit
2024-01-11 12:43 ` fengchengwen
2024-02-05 10:51 ` [PATCH v2 0/7] support dump reigser names and filter them Jie Hai
2024-02-05 10:51 ` [PATCH v2 1/7] ethdev: support report register names and filter Jie Hai
2024-02-07 17:00 ` Ferruh Yigit
2024-02-20 8:43 ` Jie Hai
2024-02-05 10:51 ` [PATCH v2 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-02-07 17:03 ` Ferruh Yigit
2024-02-22 9:01 ` Jie Hai
2024-02-05 10:51 ` [PATCH v2 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-02-05 10:51 ` [PATCH v2 4/7] net/hns3: remove dump format " Jie Hai
2024-02-05 10:51 ` [PATCH v2 5/7] net/hns3: add names for registers Jie Hai
2024-02-05 10:51 ` [PATCH v2 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-02-05 10:51 ` [PATCH v2 7/7] net/hns3: support filter dump of registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 0/7] support dump reigser names and filter them Jie Hai
2024-02-20 10:58 ` [PATCH v3 1/7] ethdev: support report register names and filter Jie Hai
2024-02-20 15:09 ` Stephen Hemminger
2024-02-26 2:33 ` Jie Hai
2024-02-20 15:13 ` Stephen Hemminger
2024-02-26 2:41 ` Jie Hai
2024-02-20 15:14 ` Stephen Hemminger
2024-02-26 2:57 ` Jie Hai
2024-02-20 15:14 ` Stephen Hemminger
2024-02-26 2:33 ` Jie Hai
2024-02-20 10:58 ` [PATCH v3 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 4/7] net/hns3: remove dump format " Jie Hai
2024-02-20 10:58 ` [PATCH v3 5/7] net/hns3: add names for registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-02-20 10:58 ` [PATCH v3 7/7] net/hns3: support filter dump of registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 0/7] support dump reigser names and filter them Jie Hai
2024-02-26 3:07 ` [PATCH v4 1/7] ethdev: support report register names and filter Jie Hai
2024-02-26 8:01 ` fengchengwen
2024-03-06 7:22 ` Jie Hai
2024-02-29 9:52 ` Thomas Monjalon
2024-03-05 7:45 ` Jie Hai
2024-02-26 3:07 ` [PATCH v4 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-02-26 9:09 ` fengchengwen [this message]
2024-03-06 7:18 ` Jie Hai
2024-02-26 3:07 ` [PATCH v4 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 4/7] net/hns3: remove dump format " Jie Hai
2024-02-26 3:07 ` [PATCH v4 5/7] net/hns3: add names for registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-02-26 3:07 ` [PATCH v4 7/7] net/hns3: support filter dump of registers Jie Hai
2024-03-07 3:02 ` [PATCH v5 0/7] support dump reigser names and filter them Jie Hai
2024-03-07 3:02 ` [PATCH v5 1/7] ethdev: support report register names and filter Jie Hai
2024-03-08 8:09 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 2/7] ethdev: add telemetry cmd for registers Jie Hai
2024-03-08 8:48 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 3/7] net/hns3: fix dump counter of registers Jie Hai
2024-03-08 8:49 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 4/7] net/hns3: remove dump format " Jie Hai
2024-03-08 9:17 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 5/7] net/hns3: add names for registers Jie Hai
2024-03-08 9:41 ` lihuisong (C)
2024-03-08 10:24 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 6/7] net/hns3: support filter directly accessed registers Jie Hai
2024-03-08 9:41 ` lihuisong (C)
2024-03-07 3:02 ` [PATCH v5 7/7] net/hns3: support filter dump of registers Jie Hai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7af7394-e7e2-41e0-2148-349cdeef9e94@huawei.com \
--to=fengchengwen@huawei.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@amd.com \
--cc=haijie1@huawei.com \
--cc=huangdengdui@huawei.com \
--cc=lihuisong@huawei.com \
--cc=liuyonglong@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).