patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <dev@dpdk.org>
Cc: Igor Romanov <igor.romanov@oktetlabs.ru>, <stable@dpdk.org>
Subject: [dpdk-stable] [PATCH] net/sfc: fix MTU change to check Rx scatter consistency
Date: Tue, 23 Apr 2019 09:14:30 +0100	[thread overview]
Message-ID: <1556007270-1511-1-git-send-email-arybchenko@solarflare.com> (raw)

From: Igor Romanov <igor.romanov@oktetlabs.ru>

Rx queue setup function checks configured MTU to make sure that
no oversized packets can be received. But a following call to
set MTU function might make this check irrelevant.

Add a function to check MTU size against Rx buffer size and
additional Rx queue info, including Rx scatter offload.

Fixes: e961cf425e02 ("net/sfc: support MTU change")
Cc: stable@dpdk.org

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
 drivers/net/sfc/sfc_ethdev.c | 34 ++++++++++++++++++++++++++++++++++
 drivers/net/sfc/sfc_rx.c     | 22 ++++++++++++++++++----
 drivers/net/sfc/sfc_rx.h     |  4 ++++
 3 files changed, 56 insertions(+), 4 deletions(-)

diff --git a/drivers/net/sfc/sfc_ethdev.c b/drivers/net/sfc/sfc_ethdev.c
index ff192314d..a007d4564 100644
--- a/drivers/net/sfc/sfc_ethdev.c
+++ b/drivers/net/sfc/sfc_ethdev.c
@@ -865,6 +865,34 @@ sfc_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	return -rc;
 }
 
+static int
+sfc_check_scatter_on_all_rx_queues(struct sfc_adapter *sa, size_t pdu)
+{
+	struct sfc_adapter_shared * const sas = sfc_sa2shared(sa);
+	const efx_nic_cfg_t *encp = efx_nic_cfg_get(sa->nic);
+	boolean_t scatter_enabled;
+	const char *error;
+	unsigned int i;
+
+	for (i = 0; i < sas->rxq_count; i++) {
+		if ((sas->rxq_info[i].state & SFC_RXQ_INITIALIZED) == 0)
+			continue;
+
+		scatter_enabled = (sas->rxq_info[i].type_flags &
+				   EFX_RXQ_FLAG_SCATTER);
+
+		if (!sfc_rx_check_scatter(pdu, sa->rxq_ctrl[i].buf_size,
+					  encp->enc_rx_prefix_size,
+					  scatter_enabled, &error)) {
+			sfc_err(sa, "MTU check for RxQ %u failed: %s", i,
+				error);
+			return EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 static int
 sfc_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 {
@@ -891,6 +919,10 @@ sfc_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 
 	sfc_adapter_lock(sa);
 
+	rc = sfc_check_scatter_on_all_rx_queues(sa, pdu);
+	if (rc != 0)
+		goto fail_check_scatter;
+
 	if (pdu != sa->port.pdu) {
 		if (sa->state == SFC_ADAPTER_STARTED) {
 			sfc_stop(sa);
@@ -927,6 +959,8 @@ sfc_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 		sfc_err(sa, "cannot start with neither new (%u) nor old (%u) "
 			"PDU max size - port is stopped",
 			(unsigned int)pdu, (unsigned int)old_pdu);
+
+fail_check_scatter:
 	sfc_adapter_unlock(sa);
 
 fail_inval:
diff --git a/drivers/net/sfc/sfc_rx.c b/drivers/net/sfc/sfc_rx.c
index 5d8c2765c..f2221119c 100644
--- a/drivers/net/sfc/sfc_rx.c
+++ b/drivers/net/sfc/sfc_rx.c
@@ -360,6 +360,18 @@ sfc_efx_rx_qdesc_status(struct sfc_dp_rxq *dp_rxq, uint16_t offset)
 	return RTE_ETH_RX_DESC_UNAVAIL;
 }
 
+boolean_t
+sfc_rx_check_scatter(size_t pdu, size_t rx_buf_size, uint32_t rx_prefix_size,
+		     boolean_t rx_scatter_enabled, const char **error)
+{
+	if ((rx_buf_size < pdu + rx_prefix_size) && !rx_scatter_enabled) {
+		*error = "Rx scatter is disabled and RxQ mbuf pool object size is too small";
+		return B_FALSE;
+	}
+
+	return B_TRUE;
+}
+
 /** Get Rx datapath ops by the datapath RxQ handle */
 const struct sfc_dp_rx *
 sfc_dp_rx_by_dp_rxq(const struct sfc_dp_rxq *dp_rxq)
@@ -975,6 +987,7 @@ sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index,
 	struct sfc_dp_rx_qcreate_info info;
 	struct sfc_dp_rx_hw_limits hw_limits;
 	uint16_t rx_free_thresh;
+	const char *error;
 
 	memset(&hw_limits, 0, sizeof(hw_limits));
 	hw_limits.rxq_max_entries = sa->rxq_max_entries;
@@ -1005,10 +1018,11 @@ sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index,
 		goto fail_bad_conf;
 	}
 
-	if ((buf_size < sa->port.pdu + encp->enc_rx_prefix_size) &&
-	    (~offloads & DEV_RX_OFFLOAD_SCATTER)) {
-		sfc_err(sa, "Rx scatter is disabled and RxQ %u mbuf pool "
-			"object size is too small", sw_index);
+	if (!sfc_rx_check_scatter(sa->port.pdu, buf_size,
+				  encp->enc_rx_prefix_size,
+				  (offloads & DEV_RX_OFFLOAD_SCATTER),
+				  &error)) {
+		sfc_err(sa, "RxQ %u MTU check failed: %s", sw_index, error);
 		sfc_err(sa, "RxQ %u calculated Rx buffer size is %u vs "
 			"PDU size %u plus Rx prefix %u bytes",
 			sw_index, buf_size, (unsigned int)sa->port.pdu,
diff --git a/drivers/net/sfc/sfc_rx.h b/drivers/net/sfc/sfc_rx.h
index ee1402022..aca0925b5 100644
--- a/drivers/net/sfc/sfc_rx.h
+++ b/drivers/net/sfc/sfc_rx.h
@@ -142,6 +142,10 @@ void sfc_rx_hash_fini(struct sfc_adapter *sa);
 int sfc_rx_hf_rte_to_efx(struct sfc_adapter *sa, uint64_t rte,
 			 efx_rx_hash_type_t *efx);
 uint64_t sfc_rx_hf_efx_to_rte(struct sfc_rss *rss, efx_rx_hash_type_t efx);
+boolean_t sfc_rx_check_scatter(size_t pdu, size_t rx_buf_size,
+			       uint32_t rx_prefix_size,
+			       boolean_t rx_scatter_enabled,
+			       const char **error);
 
 #ifdef __cplusplus
 }
-- 
2.17.1


             reply	other threads:[~2019-04-23  8:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-23  8:14 Andrew Rybchenko [this message]
2019-04-23 11:35 ` [dpdk-stable] [dpdk-dev] " Ferruh Yigit
2019-05-08 16:06 ` Kevin Traynor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556007270-1511-1-git-send-email-arybchenko@solarflare.com \
    --to=arybchenko@solarflare.com \
    --cc=dev@dpdk.org \
    --cc=igor.romanov@oktetlabs.ru \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).