patches for DPDK stable branches
 help / color / mirror / Atom feed
* Re: [dpdk-stable] [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
       [not found] <20191221014146.29795-1-rmody@marvell.com>
@ 2020-01-14  4:51 ` Jerin Jacob
  2020-01-14 18:51   ` Kevin Traynor
  0 siblings, 1 reply; 8+ messages in thread
From: Jerin Jacob @ 2020-01-14  4:51 UTC (permalink / raw)
  To: Rasesh Mody, Ferruh Yigit, dpdk stable
  Cc: dpdk-dev, Jerin Jacob, GR-Everest-DPDK-Dev

On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com> wrote:
>
> Skip the device re-initialization for secondary process.
>
> Cc: stable@dpdk.com

Correct Cc: to stable@dpdk.org

Applied to dpdk-next-net-mrvl/master. Thanks


> Signed-off-by: Rasesh Mody <rmody@marvell.com>

> ---
>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
> index 20b045ff87..7864b5b80a 100644
> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev *eth_dev, int is_vf)
>
>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops : &bnx2x_eth_dev_ops;
>
> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary process");
> +               return 0;
> +       }
> +
>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>
>         sc->pcie_bus    = pci_dev->addr.bus;
> --
> 2.18.0
>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
  2020-01-14  4:51 ` [dpdk-stable] [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process Jerin Jacob
@ 2020-01-14 18:51   ` Kevin Traynor
  2020-01-14 19:51     ` [dpdk-stable] [EXT] " Rasesh Mody
  0 siblings, 1 reply; 8+ messages in thread
From: Kevin Traynor @ 2020-01-14 18:51 UTC (permalink / raw)
  To: Jerin Jacob, Rasesh Mody, Ferruh Yigit, dpdk stable
  Cc: dpdk-dev, Jerin Jacob, GR-Everest-DPDK-Dev

On 14/01/2020 04:51, Jerin Jacob wrote:
> On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com> wrote:
>>
>> Skip the device re-initialization for secondary process.
>>
>> Cc: stable@dpdk.com
> 
> Correct Cc: to stable@dpdk.org
> 

Is it a fix, or secondary process was not intended to be supported
previously? If it is a fix, please provide the Fixed commit (will save
Ferruh searching for it).

> Applied to dpdk-next-net-mrvl/master. Thanks
> 
> 
>> Signed-off-by: Rasesh Mody <rmody@marvell.com>
> 
>> ---
>>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
>> index 20b045ff87..7864b5b80a 100644
>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev *eth_dev, int is_vf)
>>
>>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops : &bnx2x_eth_dev_ops;
>>
>> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
>> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary process");
>> +               return 0;
>> +       }
>> +
>>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>>
>>         sc->pcie_bus    = pci_dev->addr.bus;
>> --
>> 2.18.0
>>
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [EXT] Re: [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
  2020-01-14 18:51   ` Kevin Traynor
@ 2020-01-14 19:51     ` Rasesh Mody
  2020-01-15 10:58       ` Kevin Traynor
  0 siblings, 1 reply; 8+ messages in thread
From: Rasesh Mody @ 2020-01-14 19:51 UTC (permalink / raw)
  To: Kevin Traynor, Jerin Jacob, Ferruh Yigit, dpdk stable
  Cc: dpdk-dev, Jerin Jacob Kollanukkaran, GR-Everest-DPDK-Dev

Hi Kevin,

>From: Kevin Traynor <ktraynor@redhat.com>
>Sent: Tuesday, January 14, 2020 10:52 AM
>
>On 14/01/2020 04:51, Jerin Jacob wrote:
>> On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com>
>wrote:
>>>
>>> Skip the device re-initialization for secondary process.
>>>
>>> Cc: stable@dpdk.com
>>
>> Correct Cc: to stable@dpdk.org
>>
>
>Is it a fix, or secondary process was not intended to be supported previously?
>If it is a fix, please provide the Fixed commit (will save Ferruh searching for it).

Secondary process was not intended to be supported previously. So it is ok to not backport the change to all ongoing stable releases.
However, the change has been tested with DPDK 19.11, I am wondering if it can be pulled in that stable tree.
Please see below the fixline tag.

Fixes: 540a211084a7 ("bnx2x: driver core")

Thanks!
-Rasesh
>
>> Applied to dpdk-next-net-mrvl/master. Thanks
>>
>>
>>> Signed-off-by: Rasesh Mody <rmody@marvell.com>
>>
>>> ---
>>>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>>>  1 file changed, 5 insertions(+)
>>>
>>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
>>> b/drivers/net/bnx2x/bnx2x_ethdev.c
>>> index 20b045ff87..7864b5b80a 100644
>>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>>> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev
>>> *eth_dev, int is_vf)
>>>
>>>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops :
>>> &bnx2x_eth_dev_ops;
>>>
>>> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
>>> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary
>process");
>>> +               return 0;
>>> +       }
>>> +
>>>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>>>
>>>         sc->pcie_bus    = pci_dev->addr.bus;
>>> --
>>> 2.18.0
>>>
>>



^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [EXT] Re: [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
  2020-01-14 19:51     ` [dpdk-stable] [EXT] " Rasesh Mody
@ 2020-01-15 10:58       ` Kevin Traynor
  2020-01-15 12:47         ` Ferruh Yigit
  0 siblings, 1 reply; 8+ messages in thread
From: Kevin Traynor @ 2020-01-15 10:58 UTC (permalink / raw)
  To: Rasesh Mody, Jerin Jacob, Ferruh Yigit, dpdk stable
  Cc: dpdk-dev, Jerin Jacob Kollanukkaran, GR-Everest-DPDK-Dev, Luca Boccassi

On 14/01/2020 19:51, Rasesh Mody wrote:
> Hi Kevin,
> 
>> From: Kevin Traynor <ktraynor@redhat.com>
>> Sent: Tuesday, January 14, 2020 10:52 AM
>>
>> On 14/01/2020 04:51, Jerin Jacob wrote:
>>> On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com>
>> wrote:
>>>>
>>>> Skip the device re-initialization for secondary process.
>>>>
>>>> Cc: stable@dpdk.com
>>>
>>> Correct Cc: to stable@dpdk.org
>>>
>>
>> Is it a fix, or secondary process was not intended to be supported previously?
>> If it is a fix, please provide the Fixed commit (will save Ferruh searching for it).
> 
> Secondary process was not intended to be supported previously. So it is ok to not backport the change to all ongoing stable releases.

Thanks for confirming.

> However, the change has been tested with DPDK 19.11, I am wondering if it can be pulled in that stable tree.

Cc Luca

> Please see below the fixline tag.
> 
> Fixes: 540a211084a7 ("bnx2x: driver core")
> 

Fixes tag won't be needed now as you've confirmed the code was doing
what it was intending to do.

> Thanks!
> -Rasesh
>>
>>> Applied to dpdk-next-net-mrvl/master. Thanks
>>>
>>>
>>>> Signed-off-by: Rasesh Mody <rmody@marvell.com>
>>>
>>>> ---
>>>>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>>>>  1 file changed, 5 insertions(+)
>>>>
>>>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>> b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>> index 20b045ff87..7864b5b80a 100644
>>>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev
>>>> *eth_dev, int is_vf)
>>>>
>>>>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops :
>>>> &bnx2x_eth_dev_ops;
>>>>
>>>> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
>>>> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary
>> process");
>>>> +               return 0;
>>>> +       }
>>>> +
>>>>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>>>>
>>>>         sc->pcie_bus    = pci_dev->addr.bus;
>>>> --
>>>> 2.18.0
>>>>
>>>
> 
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [EXT] Re: [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
  2020-01-15 10:58       ` Kevin Traynor
@ 2020-01-15 12:47         ` Ferruh Yigit
  2020-01-15 12:57           ` Kevin Traynor
  0 siblings, 1 reply; 8+ messages in thread
From: Ferruh Yigit @ 2020-01-15 12:47 UTC (permalink / raw)
  To: Kevin Traynor, Rasesh Mody, Jerin Jacob, dpdk stable
  Cc: dpdk-dev, Jerin Jacob Kollanukkaran, GR-Everest-DPDK-Dev, Luca Boccassi

On 1/15/2020 10:58 AM, Kevin Traynor wrote:
> On 14/01/2020 19:51, Rasesh Mody wrote:
>> Hi Kevin,
>>
>>> From: Kevin Traynor <ktraynor@redhat.com>
>>> Sent: Tuesday, January 14, 2020 10:52 AM
>>>
>>> On 14/01/2020 04:51, Jerin Jacob wrote:
>>>> On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com>
>>> wrote:
>>>>>
>>>>> Skip the device re-initialization for secondary process.
>>>>>
>>>>> Cc: stable@dpdk.com
>>>>
>>>> Correct Cc: to stable@dpdk.org
>>>>
>>>
>>> Is it a fix, or secondary process was not intended to be supported previously?
>>> If it is a fix, please provide the Fixed commit (will save Ferruh searching for it).
>>
>> Secondary process was not intended to be supported previously. So it is ok to not backport the change to all ongoing stable releases.
> 
> Thanks for confirming.
> 
>> However, the change has been tested with DPDK 19.11, I am wondering if it can be pulled in that stable tree.
> 
> Cc Luca
> 
>> Please see below the fixline tag.
>>
>> Fixes: 540a211084a7 ("bnx2x: driver core")
>>
> 
> Fixes tag won't be needed now as you've confirmed the code was doing
> what it was intending to do.

Since there is a request to backport this into 19.11, I was planning to add the
fixes tag (stable tag is already there) but will it confuse the 18.11 because
the commit in fixes line is older than 18.11?

> 
>> Thanks!
>> -Rasesh
>>>
>>>> Applied to dpdk-next-net-mrvl/master. Thanks
>>>>
>>>>
>>>>> Signed-off-by: Rasesh Mody <rmody@marvell.com>
>>>>
>>>>> ---
>>>>>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>>>>>  1 file changed, 5 insertions(+)
>>>>>
>>>>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>> b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>> index 20b045ff87..7864b5b80a 100644
>>>>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev
>>>>> *eth_dev, int is_vf)
>>>>>
>>>>>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops :
>>>>> &bnx2x_eth_dev_ops;
>>>>>
>>>>> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
>>>>> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary
>>> process");
>>>>> +               return 0;
>>>>> +       }
>>>>> +
>>>>>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>>>>>
>>>>>         sc->pcie_bus    = pci_dev->addr.bus;
>>>>> --
>>>>> 2.18.0
>>>>>
>>>>
>>
>>
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [EXT] Re: [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
  2020-01-15 12:47         ` Ferruh Yigit
@ 2020-01-15 12:57           ` Kevin Traynor
  2020-01-15 13:11             ` Ferruh Yigit
  0 siblings, 1 reply; 8+ messages in thread
From: Kevin Traynor @ 2020-01-15 12:57 UTC (permalink / raw)
  To: Ferruh Yigit, Rasesh Mody, Jerin Jacob, dpdk stable
  Cc: dpdk-dev, Jerin Jacob Kollanukkaran, GR-Everest-DPDK-Dev, Luca Boccassi

On 15/01/2020 12:47, Ferruh Yigit wrote:
> On 1/15/2020 10:58 AM, Kevin Traynor wrote:
>> On 14/01/2020 19:51, Rasesh Mody wrote:
>>> Hi Kevin,
>>>
>>>> From: Kevin Traynor <ktraynor@redhat.com>
>>>> Sent: Tuesday, January 14, 2020 10:52 AM
>>>>
>>>> On 14/01/2020 04:51, Jerin Jacob wrote:
>>>>> On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com>
>>>> wrote:
>>>>>>
>>>>>> Skip the device re-initialization for secondary process.
>>>>>>
>>>>>> Cc: stable@dpdk.com
>>>>>
>>>>> Correct Cc: to stable@dpdk.org
>>>>>
>>>>
>>>> Is it a fix, or secondary process was not intended to be supported previously?
>>>> If it is a fix, please provide the Fixed commit (will save Ferruh searching for it).
>>>
>>> Secondary process was not intended to be supported previously. So it is ok to not backport the change to all ongoing stable releases.
>>
>> Thanks for confirming.
>>
>>> However, the change has been tested with DPDK 19.11, I am wondering if it can be pulled in that stable tree.
>>
>> Cc Luca
>>
>>> Please see below the fixline tag.
>>>
>>> Fixes: 540a211084a7 ("bnx2x: driver core")
>>>
>>
>> Fixes tag won't be needed now as you've confirmed the code was doing
>> what it was intending to do.
> 
> Since there is a request to backport this into 19.11, I was planning to add the
> fixes tag (stable tag is already there) but will it confuse the 18.11 because
> the commit in fixes line is older than 18.11?
> 

I think it should not have a Fixes tag. In this case there is nothing
being fixed, just a new feature being added/supported. It will be picked
up as a candidate for stable branches through the cc: stable, from there
it can be discussed.

>>
>>> Thanks!
>>> -Rasesh
>>>>
>>>>> Applied to dpdk-next-net-mrvl/master. Thanks
>>>>>
>>>>>
>>>>>> Signed-off-by: Rasesh Mody <rmody@marvell.com>
>>>>>
>>>>>> ---
>>>>>>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>>>>>>  1 file changed, 5 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>> b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>> index 20b045ff87..7864b5b80a 100644
>>>>>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev
>>>>>> *eth_dev, int is_vf)
>>>>>>
>>>>>>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops :
>>>>>> &bnx2x_eth_dev_ops;
>>>>>>
>>>>>> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
>>>>>> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary
>>>> process");
>>>>>> +               return 0;
>>>>>> +       }
>>>>>> +
>>>>>>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>>>>>>
>>>>>>         sc->pcie_bus    = pci_dev->addr.bus;
>>>>>> --
>>>>>> 2.18.0
>>>>>>
>>>>>
>>>
>>>
>>
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [EXT] Re: [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
  2020-01-15 12:57           ` Kevin Traynor
@ 2020-01-15 13:11             ` Ferruh Yigit
  2020-01-15 14:02               ` Kevin Traynor
  0 siblings, 1 reply; 8+ messages in thread
From: Ferruh Yigit @ 2020-01-15 13:11 UTC (permalink / raw)
  To: Kevin Traynor, Rasesh Mody, Jerin Jacob, dpdk stable
  Cc: dpdk-dev, Jerin Jacob Kollanukkaran, GR-Everest-DPDK-Dev, Luca Boccassi

On 1/15/2020 12:57 PM, Kevin Traynor wrote:
> On 15/01/2020 12:47, Ferruh Yigit wrote:
>> On 1/15/2020 10:58 AM, Kevin Traynor wrote:
>>> On 14/01/2020 19:51, Rasesh Mody wrote:
>>>> Hi Kevin,
>>>>
>>>>> From: Kevin Traynor <ktraynor@redhat.com>
>>>>> Sent: Tuesday, January 14, 2020 10:52 AM
>>>>>
>>>>> On 14/01/2020 04:51, Jerin Jacob wrote:
>>>>>> On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com>
>>>>> wrote:
>>>>>>>
>>>>>>> Skip the device re-initialization for secondary process.
>>>>>>>
>>>>>>> Cc: stable@dpdk.com
>>>>>>
>>>>>> Correct Cc: to stable@dpdk.org
>>>>>>
>>>>>
>>>>> Is it a fix, or secondary process was not intended to be supported previously?
>>>>> If it is a fix, please provide the Fixed commit (will save Ferruh searching for it).
>>>>
>>>> Secondary process was not intended to be supported previously. So it is ok to not backport the change to all ongoing stable releases.
>>>
>>> Thanks for confirming.
>>>
>>>> However, the change has been tested with DPDK 19.11, I am wondering if it can be pulled in that stable tree.
>>>
>>> Cc Luca
>>>
>>>> Please see below the fixline tag.
>>>>
>>>> Fixes: 540a211084a7 ("bnx2x: driver core")
>>>>
>>>
>>> Fixes tag won't be needed now as you've confirmed the code was doing
>>> what it was intending to do.
>>
>> Since there is a request to backport this into 19.11, I was planning to add the
>> fixes tag (stable tag is already there) but will it confuse the 18.11 because
>> the commit in fixes line is older than 18.11?
>>
> 
> I think it should not have a Fixes tag. In this case there is nothing
> being fixed, just a new feature being added/supported. It will be picked
> up as a candidate for stable branches through the cc: stable, from there
> it can be discussed.

OK, I am not changing anything.
But when fixes tag is missing I am not clear how you decide if the fix should go
into any specific LTS or not, it should be hard to figure it out without
reference point.

> 
>>>
>>>> Thanks!
>>>> -Rasesh
>>>>>
>>>>>> Applied to dpdk-next-net-mrvl/master. Thanks
>>>>>>
>>>>>>
>>>>>>> Signed-off-by: Rasesh Mody <rmody@marvell.com>
>>>>>>
>>>>>>> ---
>>>>>>>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>>>>>>>  1 file changed, 5 insertions(+)
>>>>>>>
>>>>>>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>> b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>> index 20b045ff87..7864b5b80a 100644
>>>>>>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev
>>>>>>> *eth_dev, int is_vf)
>>>>>>>
>>>>>>>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops :
>>>>>>> &bnx2x_eth_dev_ops;
>>>>>>>
>>>>>>> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
>>>>>>> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary
>>>>> process");
>>>>>>> +               return 0;
>>>>>>> +       }
>>>>>>> +
>>>>>>>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>>>>>>>
>>>>>>>         sc->pcie_bus    = pci_dev->addr.bus;
>>>>>>> --
>>>>>>> 2.18.0
>>>>>>>
>>>>>>
>>>>
>>>>
>>>
>>
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [dpdk-stable] [EXT] Re: [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process
  2020-01-15 13:11             ` Ferruh Yigit
@ 2020-01-15 14:02               ` Kevin Traynor
  0 siblings, 0 replies; 8+ messages in thread
From: Kevin Traynor @ 2020-01-15 14:02 UTC (permalink / raw)
  To: Ferruh Yigit, Rasesh Mody, Jerin Jacob, dpdk stable
  Cc: dpdk-dev, Jerin Jacob Kollanukkaran, GR-Everest-DPDK-Dev, Luca Boccassi

On 15/01/2020 13:11, Ferruh Yigit wrote:
> On 1/15/2020 12:57 PM, Kevin Traynor wrote:
>> On 15/01/2020 12:47, Ferruh Yigit wrote:
>>> On 1/15/2020 10:58 AM, Kevin Traynor wrote:
>>>> On 14/01/2020 19:51, Rasesh Mody wrote:
>>>>> Hi Kevin,
>>>>>
>>>>>> From: Kevin Traynor <ktraynor@redhat.com>
>>>>>> Sent: Tuesday, January 14, 2020 10:52 AM
>>>>>>
>>>>>> On 14/01/2020 04:51, Jerin Jacob wrote:
>>>>>>> On Sat, Dec 21, 2019 at 7:12 AM Rasesh Mody <rmody@marvell.com>
>>>>>> wrote:
>>>>>>>>
>>>>>>>> Skip the device re-initialization for secondary process.
>>>>>>>>
>>>>>>>> Cc: stable@dpdk.com
>>>>>>>
>>>>>>> Correct Cc: to stable@dpdk.org
>>>>>>>
>>>>>>
>>>>>> Is it a fix, or secondary process was not intended to be supported previously?
>>>>>> If it is a fix, please provide the Fixed commit (will save Ferruh searching for it).
>>>>>
>>>>> Secondary process was not intended to be supported previously. So it is ok to not backport the change to all ongoing stable releases.
>>>>
>>>> Thanks for confirming.
>>>>
>>>>> However, the change has been tested with DPDK 19.11, I am wondering if it can be pulled in that stable tree.
>>>>
>>>> Cc Luca
>>>>
>>>>> Please see below the fixline tag.
>>>>>
>>>>> Fixes: 540a211084a7 ("bnx2x: driver core")
>>>>>
>>>>
>>>> Fixes tag won't be needed now as you've confirmed the code was doing
>>>> what it was intending to do.
>>>
>>> Since there is a request to backport this into 19.11, I was planning to add the
>>> fixes tag (stable tag is already there) but will it confuse the 18.11 because
>>> the commit in fixes line is older than 18.11?
>>>
>>
>> I think it should not have a Fixes tag. In this case there is nothing
>> being fixed, just a new feature being added/supported. It will be picked
>> up as a candidate for stable branches through the cc: stable, from there
>> it can be discussed.
> 
> OK, I am not changing anything.
> But when fixes tag is missing I am not clear how you decide if the fix should go
> into any specific LTS or not, it should be hard to figure it out without
> reference point.
> 

Yes, you are correct, for bugfixes it is important because otherwise
stable maintainer have to stop, try to figure it out and start email
convo with authors to discuss etc. Whereas with Fixes tags, non-relevant
ones for a branch can pruned out quickly and discussion is not needed.

In this case however, where it's not really a bugfix but more a request
to add/support something new, it probably needs discussion anyway and
not having the Fixes tag ensures that takes place and it doesn't
automatically slip in unnoticed.

>>
>>>>
>>>>> Thanks!
>>>>> -Rasesh
>>>>>>
>>>>>>> Applied to dpdk-next-net-mrvl/master. Thanks
>>>>>>>
>>>>>>>
>>>>>>>> Signed-off-by: Rasesh Mody <rmody@marvell.com>
>>>>>>>
>>>>>>>> ---
>>>>>>>>  drivers/net/bnx2x/bnx2x_ethdev.c | 5 +++++
>>>>>>>>  1 file changed, 5 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>>> b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>>> index 20b045ff87..7864b5b80a 100644
>>>>>>>> --- a/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>>> +++ b/drivers/net/bnx2x/bnx2x_ethdev.c
>>>>>>>> @@ -598,6 +598,11 @@ bnx2x_common_dev_init(struct rte_eth_dev
>>>>>>>> *eth_dev, int is_vf)
>>>>>>>>
>>>>>>>>         eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops :
>>>>>>>> &bnx2x_eth_dev_ops;
>>>>>>>>
>>>>>>>> +       if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
>>>>>>>> +               PMD_DRV_LOG(ERR, sc, "Skipping device init from secondary
>>>>>> process");
>>>>>>>> +               return 0;
>>>>>>>> +       }
>>>>>>>> +
>>>>>>>>         rte_eth_copy_pci_info(eth_dev, pci_dev);
>>>>>>>>
>>>>>>>>         sc->pcie_bus    = pci_dev->addr.bus;
>>>>>>>> --
>>>>>>>> 2.18.0
>>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2020-01-15 14:02 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20191221014146.29795-1-rmody@marvell.com>
2020-01-14  4:51 ` [dpdk-stable] [dpdk-dev] [PATCH] net/bnx2x: add support for secondary process Jerin Jacob
2020-01-14 18:51   ` Kevin Traynor
2020-01-14 19:51     ` [dpdk-stable] [EXT] " Rasesh Mody
2020-01-15 10:58       ` Kevin Traynor
2020-01-15 12:47         ` Ferruh Yigit
2020-01-15 12:57           ` Kevin Traynor
2020-01-15 13:11             ` Ferruh Yigit
2020-01-15 14:02               ` Kevin Traynor

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).