[dpdk-stable] [PATCH v3] net/txgbe: fix to strip QINQ

[dpdk-stable] [PATCH v3] net/txgbe: fix to strip QINQ

[Jiawen Wu]

Support to enable and disable QINQ hardware strip, when configure vlan
offload with QINQ strip mask. If there are packets have QINQ tag to RSS,
users should enable QINQ strip before configuring the RSS.

Fixes: 220b0e49bc47 ("net/txgbe: support VLAN")
Cc: stable@dpdk.org

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 drivers/net/txgbe/txgbe_ethdev.c | 39 +++++++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 6 deletions(-)

diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index d7747d0f09..72fe1b26db 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -1186,7 +1186,6 @@ txgbe_vlan_hw_extend_disable(struct rte_eth_dev *dev)
 
 	ctrl = rd32(hw, TXGBE_PORTCTL);
 	ctrl &= ~TXGBE_PORTCTL_VLANEXT;
-	ctrl &= ~TXGBE_PORTCTL_QINQ;
 	wr32(hw, TXGBE_PORTCTL, ctrl);
 }
 
@@ -1194,17 +1193,38 @@ static void
 txgbe_vlan_hw_extend_enable(struct rte_eth_dev *dev)
 {
 	struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
-	struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
-	struct rte_eth_txmode *txmode = &dev->data->dev_conf.txmode;
 	uint32_t ctrl;
 
 	PMD_INIT_FUNC_TRACE();
 
 	ctrl  = rd32(hw, TXGBE_PORTCTL);
 	ctrl |= TXGBE_PORTCTL_VLANEXT;
-	if (rxmode->offloads & DEV_RX_OFFLOAD_QINQ_STRIP ||
-	    txmode->offloads & DEV_TX_OFFLOAD_QINQ_INSERT)
-		ctrl |= TXGBE_PORTCTL_QINQ;
+	wr32(hw, TXGBE_PORTCTL, ctrl);
+}
+
+static void
+txgbe_qinq_hw_strip_disable(struct rte_eth_dev *dev)
+{
+	struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+	uint32_t ctrl;
+
+	PMD_INIT_FUNC_TRACE();
+
+	ctrl = rd32(hw, TXGBE_PORTCTL);
+	ctrl &= ~TXGBE_PORTCTL_QINQ;
+	wr32(hw, TXGBE_PORTCTL, ctrl);
+}
+
+static void
+txgbe_qinq_hw_strip_enable(struct rte_eth_dev *dev)
+{
+	struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+	uint32_t ctrl;
+
+	PMD_INIT_FUNC_TRACE();
+
+	ctrl  = rd32(hw, TXGBE_PORTCTL);
+	ctrl |= TXGBE_PORTCTL_QINQ | TXGBE_PORTCTL_VLANEXT;
 	wr32(hw, TXGBE_PORTCTL, ctrl);
 }
 
@@ -1271,6 +1291,13 @@ txgbe_vlan_offload_config(struct rte_eth_dev *dev, int mask)
 			txgbe_vlan_hw_extend_disable(dev);
 	}
 
+	if (mask & ETH_QINQ_STRIP_MASK) {
+		if (rxmode->offloads & DEV_RX_OFFLOAD_QINQ_STRIP)
+			txgbe_qinq_hw_strip_enable(dev);
+		else
+			txgbe_qinq_hw_strip_disable(dev);
+	}
+
 	return 0;
 }
 
-- 
2.21.0.windows.1

Re: [dpdk-stable] [PATCH v3] net/txgbe: fix to strip QINQ

[Ferruh Yigit]

On 5/8/2021 7:35 AM, Jiawen Wu wrote:
> Support to enable and disable QINQ hardware strip, when configure vlan
> offload with QINQ strip mask. If there are packets have QINQ tag to RSS,
> users should enable QINQ strip before configuring the RSS.
> 
> Fixes: 220b0e49bc47 ("net/txgbe: support VLAN")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>

Applied to dpdk-next-net/main, thanks.