patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH v1] net/mlx5: fix IPIP multi tunnel validation
@ 2021-06-16  7:01 Lior Margalit
  2021-06-16  9:01 ` Matan Azrad
  2021-06-16 13:09 ` [dpdk-stable] [dpdk-dev] " Raslan Darawsheh
  0 siblings, 2 replies; 3+ messages in thread
From: Lior Margalit @ 2021-06-16  7:01 UTC (permalink / raw)
  To: dev, Viacheslav Ovsiienko, Matan Azrad; +Cc: Ori Kam, Lior Margalit, stable

A flow rule must not include multiple tunnel layers.
An attempt to create such a rule, for example:
testpmd> flow create .../ vxlan / eth / ipv4 proto is 4 / end <actions>
results in an unclear error.

In the current implementation there is a check for
multiple IPIP tunnels, but not for combination of IPIP
and a different kind of tunnel, such as VXLAN. The fix
is to enhance the above check to use MLX5_FLOW_LAYER_TUNNEL
that consists of all the tunnel masks. The error message
will be "multiple tunnel not supported".

Fixes: 5e33bebdd8d3 ("net/mlx5: support IP-in-IP tunnel")
Cc: stable@dpdk.org

Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
---
 drivers/net/mlx5/mlx5_flow.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index e5e062d09a..c5c767aaee 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -2124,7 +2124,7 @@ mlx5_flow_validate_item_ipv4(const struct rte_flow_item *item,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
 					  "IPv4 cannot follow L2/VLAN layer "
 					  "which ether type is not IPv4");
-	if (item_flags & MLX5_FLOW_LAYER_IPIP) {
+	if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
 		if (mask && spec)
 			next_proto = mask->hdr.next_proto_id &
 				     spec->hdr.next_proto_id;
@@ -2232,7 +2232,7 @@ mlx5_flow_validate_item_ipv6(const struct rte_flow_item *item,
 					  "which ether type is not IPv6");
 	if (mask && mask->hdr.proto == UINT8_MAX && spec)
 		next_proto = spec->hdr.proto;
-	if (item_flags & MLX5_FLOW_LAYER_IPV6_ENCAP) {
+	if (item_flags & MLX5_FLOW_LAYER_TUNNEL) {
 		if (next_proto == IPPROTO_IPIP || next_proto == IPPROTO_IPV6)
 			return rte_flow_error_set(error, EINVAL,
 						  RTE_FLOW_ERROR_TYPE_ITEM,
-- 
2.21.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-stable] [PATCH v1] net/mlx5: fix IPIP multi tunnel validation
  2021-06-16  7:01 [dpdk-stable] [PATCH v1] net/mlx5: fix IPIP multi tunnel validation Lior Margalit
@ 2021-06-16  9:01 ` Matan Azrad
  2021-06-16 13:09 ` [dpdk-stable] [dpdk-dev] " Raslan Darawsheh
  1 sibling, 0 replies; 3+ messages in thread
From: Matan Azrad @ 2021-06-16  9:01 UTC (permalink / raw)
  To: Lior Margalit, dev, Slava Ovsiienko; +Cc: Ori Kam, stable



From: Lior Margalit
> A flow rule must not include multiple tunnel layers.
> An attempt to create such a rule, for example:
> testpmd> flow create .../ vxlan / eth / ipv4 proto is 4 / end <actions>
> results in an unclear error.
> 
> In the current implementation there is a check for multiple IPIP tunnels, but
> not for combination of IPIP and a different kind of tunnel, such as VXLAN.
> The fix is to enhance the above check to use MLX5_FLOW_LAYER_TUNNEL
> that consists of all the tunnel masks. The error message will be "multiple
> tunnel not supported".
> 
> Fixes: 5e33bebdd8d3 ("net/mlx5: support IP-in-IP tunnel")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
> Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH v1] net/mlx5: fix IPIP multi tunnel validation
  2021-06-16  7:01 [dpdk-stable] [PATCH v1] net/mlx5: fix IPIP multi tunnel validation Lior Margalit
  2021-06-16  9:01 ` Matan Azrad
@ 2021-06-16 13:09 ` Raslan Darawsheh
  1 sibling, 0 replies; 3+ messages in thread
From: Raslan Darawsheh @ 2021-06-16 13:09 UTC (permalink / raw)
  To: Lior Margalit, dev, Slava Ovsiienko, Matan Azrad
  Cc: Ori Kam, Lior Margalit, stable

Hi,

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Lior Margalit
> Sent: Wednesday, June 16, 2021 10:01 AM
> To: dev@dpdk.org; Slava Ovsiienko <viacheslavo@nvidia.com>; Matan Azrad
> <matan@nvidia.com>
> Cc: Ori Kam <orika@nvidia.com>; Lior Margalit <lmargalit@nvidia.com>;
> stable@dpdk.org
> Subject: [dpdk-dev] [PATCH v1] net/mlx5: fix IPIP multi tunnel validation
> 
> A flow rule must not include multiple tunnel layers.
> An attempt to create such a rule, for example:
> testpmd> flow create .../ vxlan / eth / ipv4 proto is 4 / end <actions>
> results in an unclear error.
> 
> In the current implementation there is a check for
> multiple IPIP tunnels, but not for combination of IPIP
> and a different kind of tunnel, such as VXLAN. The fix
> is to enhance the above check to use MLX5_FLOW_LAYER_TUNNEL
> that consists of all the tunnel masks. The error message
> will be "multiple tunnel not supported".
> 
> Fixes: 5e33bebdd8d3 ("net/mlx5: support IP-in-IP tunnel")
> Cc: stable@dpdk.org
> 

Patch applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-06-16 13:09 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-16  7:01 [dpdk-stable] [PATCH v1] net/mlx5: fix IPIP multi tunnel validation Lior Margalit
2021-06-16  9:01 ` Matan Azrad
2021-06-16 13:09 ` [dpdk-stable] [dpdk-dev] " Raslan Darawsheh

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git