[dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[venkataprasad k]

Hello,

I am trying to run testpmd application and getting the following error
"EAL: No probed ethernet devices"

version: dpdk-stable-17.11.1
Log:
[root@localhost dpdk-stable-17.11.1]#  ./build/app/testpmd –l 12,13,14 –n 4
-- -i
EAL: Detected 80 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:01:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.2 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.3 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
*EAL: No probed ethernet devices*
Interactive-mode selected
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=779456, size=2176,
socket=0
USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=779456, size=2176,
socket=1
USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=779456, size=2176,
socket=2
USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=779456, size=2176,
socket=3
Done
testpmd> show config fwd
io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support
enabled, MP over anonymous pages disabled

testpmd>


from the dpdk-setup script, i see there are devices supported by dpdk

Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=

Network devices using kernel driver
===================================
0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
unused=vfio-pci *Active*
0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
unused=vfio-pci
0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
unused=vfio-pci
0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
unused=vfio-pci

Other Network devices
=====================
<none>

My understanding is, it should consider the devices under "Network devices
using DPDK-compatible driver", but it is not.
The nic that i am using Intel 82599, which is supported by dpdk.

can someone help me to understand what is wrong here?

Thanks,
Venkat

Re: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[Rosen, Rami]

Hi,
You need to bind a device to DPDK before launching testpmd, with the 
usertools/dpdk-devbind.py script. Did you do it? What is the output 
of 
./usertools/dpdk-devbind.py -s
on your host ? do you see any entries under "Network devices using DPDK-compatible driver" when running ./usertools/dpdk-devbind.py -s?

Please take a look in the "Linux Getting Started Guide", section 
4.4: "Binding and Unbinding Network Ports to/from the Kernel Modules"

http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules

Regards,
Rami Rosen



-----Original Message-----
From: users [mailto:users-bounces@dpdk.org] On Behalf Of venkataprasad k
Sent: Monday, April 23, 2018 15:35
To: users@dpdk.org
Subject: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

Hello,

I am trying to run testpmd application and getting the following error
"EAL: No probed ethernet devices"

version: dpdk-stable-17.11.1
Log:
[root@localhost dpdk-stable-17.11.1]#  ./build/app/testpmd –l 12,13,14 –n 4
-- -i
EAL: Detected 80 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:01:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.2 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.3 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
*EAL: No probed ethernet devices*
Interactive-mode selected
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=779456, size=2176,
socket=0
USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=779456, size=2176,
socket=1
USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=779456, size=2176,
socket=2
USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=779456, size=2176,
socket=3
Done
testpmd> show config fwd
io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support enabled, MP over anonymous pages disabled

testpmd>


from the dpdk-setup script, i see there are devices supported by dpdk

Network devices using DPDK-compatible driver ============================================
0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=

Network devices using kernel driver
===================================
0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb unused=vfio-pci *Active*
0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb unused=vfio-pci
0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb unused=vfio-pci
0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb unused=vfio-pci

Other Network devices
=====================
<none>

My understanding is, it should consider the devices under "Network devices using DPDK-compatible driver", but it is not.
The nic that i am using Intel 82599, which is supported by dpdk.

can someone help me to understand what is wrong here?

Thanks,
Venkat

Re: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[venkataprasad k]

Hi Rami,

Thanks for your reply.
yes. i already did the binding and here is the output.
[root@localhost dpdk-stable-17.11.1]# ./usertools/dpdk-devbind.py -s

Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=

Network devices using kernel driver
===================================
0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
unused=vfio-pci *Active*
0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
unused=vfio-pci
0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
unused=vfio-pci
0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
unused=vfio-pci

Other Network devices
=====================
<none>

similarly tried with igb_uio as well, but i see the same result ( "EAL: No
probed ethernet devices" )

Thanks,
Venkat


On Mon, Apr 23, 2018 at 9:55 PM, Rosen, Rami <rami.rosen@intel.com> wrote:

> Hi,
> You need to bind a device to DPDK before launching testpmd, with the
> usertools/dpdk-devbind.py script. Did you do it? What is the output
> of
> ./usertools/dpdk-devbind.py -s
> on your host ? do you see any entries under "Network devices using
> DPDK-compatible driver" when running ./usertools/dpdk-devbind.py -s?
>
> Please take a look in the "Linux Getting Started Guide", section
> 4.4: "Binding and Unbinding Network Ports to/from the Kernel Modules"
>
> http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html#
> binding-and-unbinding-network-ports-to-from-the-kernel-modules
>
> Regards,
> Rami Rosen
>
>
>
> -----Original Message-----
> From: users [mailto:users-bounces@dpdk.org] On Behalf Of venkataprasad k
> Sent: Monday, April 23, 2018 15:35
> To: users@dpdk.org
> Subject: [dpdk-users] testpmd + EAL: No probed ethernet devices +
> dpdk-17.11.1
>
> Hello,
>
> I am trying to run testpmd application and getting the following error
> "EAL: No probed ethernet devices"
>
> version: dpdk-stable-17.11.1
> Log:
> [root@localhost dpdk-stable-17.11.1]#  ./build/app/testpmd –l 12,13,14 –n
> 4
> -- -i
> EAL: Detected 80 lcore(s)
> EAL: No free hugepages reported in hugepages-1048576kB
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: PCI device 0000:01:00.0 on NUMA socket 0
> EAL:   probe driver: 8086:1521 net_e1000_igb
> EAL: PCI device 0000:01:00.1 on NUMA socket 0
> EAL:   probe driver: 8086:1521 net_e1000_igb
> EAL: PCI device 0000:01:00.2 on NUMA socket 0
> EAL:   probe driver: 8086:1521 net_e1000_igb
> EAL: PCI device 0000:01:00.3 on NUMA socket 0
> EAL:   probe driver: 8086:1521 net_e1000_igb
> *EAL: No probed ethernet devices*
> Interactive-mode selected
> USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=779456, size=2176,
> socket=0
> USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=779456, size=2176,
> socket=1
> USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=779456, size=2176,
> socket=2
> USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=779456, size=2176,
> socket=3
> Done
> testpmd> show config fwd
> io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support
> enabled, MP over anonymous pages disabled
>
> testpmd>
>
>
> from the dpdk-setup script, i see there are devices supported by dpdk
>
> Network devices using DPDK-compatible driver ==============================
> ==============
> 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
>
> Network devices using kernel driver
> ===================================
> 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> unused=vfio-pci *Active*
> 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> unused=vfio-pci
> 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> unused=vfio-pci
> 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> unused=vfio-pci
>
> Other Network devices
> =====================
> <none>
>
> My understanding is, it should consider the devices under "Network devices
> using DPDK-compatible driver", but it is not.
> The nic that i am using Intel 82599, which is supported by dpdk.
>
> can someone help me to understand what is wrong here?
>
> Thanks,
> Venkat
>

Re: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[Stephen Hemminger]

On Tue, 24 Apr 2018 09:44:54 +0530
venkataprasad k <prasaddml@gmail.com> wrote:

> Hi Rami,
> 
> Thanks for your reply.
> yes. i already did the binding and here is the output.
> [root@localhost dpdk-stable-17.11.1]# ./usertools/dpdk-devbind.py -s
> 
> Network devices using DPDK-compatible driver
> ============================================
> 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 
> Network devices using kernel driver
> ===================================
> 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> unused=vfio-pci *Active*
> 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> unused=vfio-pci
> 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> unused=vfio-pci
> 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> unused=vfio-pci
> 
> Other Network devices
> =====================
> <none>
> 
> similarly tried with igb_uio as well, but i see the same result ( "EAL: No
> probed ethernet devices" )
> 
> Thanks,
> Venkat
> 
> 
> On Mon, Apr 23, 2018 at 9:55 PM, Rosen, Rami <rami.rosen@intel.com> wrote:
> 
> > Hi,
> > You need to bind a device to DPDK before launching testpmd, with the
> > usertools/dpdk-devbind.py script. Did you do it? What is the output
> > of
> > ./usertools/dpdk-devbind.py -s
> > on your host ? do you see any entries under "Network devices using
> > DPDK-compatible driver" when running ./usertools/dpdk-devbind.py -s?
> >
> > Please take a look in the "Linux Getting Started Guide", section
> > 4.4: "Binding and Unbinding Network Ports to/from the Kernel Modules"
> >
> > http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html#
> > binding-and-unbinding-network-ports-to-from-the-kernel-modules
> >
> > Regards,
> > Rami Rosen
> >
> >
> >
> > -----Original Message-----
> > From: users [mailto:users-bounces@dpdk.org] On Behalf Of venkataprasad k
> > Sent: Monday, April 23, 2018 15:35
> > To: users@dpdk.org
> > Subject: [dpdk-users] testpmd + EAL: No probed ethernet devices +
> > dpdk-17.11.1
> >
> > Hello,
> >
> > I am trying to run testpmd application and getting the following error
> > "EAL: No probed ethernet devices"
> >
> > version: dpdk-stable-17.11.1
> > Log:
> > [root@localhost dpdk-stable-17.11.1]#  ./build/app/testpmd –l 12,13,14 –n
> > 4
> > -- -i
> > EAL: Detected 80 lcore(s)
> > EAL: No free hugepages reported in hugepages-1048576kB
> > EAL: Probing VFIO support...
> > EAL: VFIO support initialized
> > EAL: PCI device 0000:01:00.0 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:01:00.1 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:01:00.2 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:01:00.3 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > *EAL: No probed ethernet devices*
> > Interactive-mode selected
> > USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=779456, size=2176,
> > socket=0
> > USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=779456, size=2176,
> > socket=1
> > USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=779456, size=2176,
> > socket=2
> > USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=779456, size=2176,
> > socket=3
> > Done  
> > testpmd> show config fwd  
> > io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support
> > enabled, MP over anonymous pages disabled
> >  
> > testpmd>  
> >
> >
> > from the dpdk-setup script, i see there are devices supported by dpdk
> >
> > Network devices using DPDK-compatible driver ==============================
> > ==============
> > 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> >
> > Network devices using kernel driver
> > ===================================
> > 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> > unused=vfio-pci *Active*
> > 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> > unused=vfio-pci
> > 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> > unused=vfio-pci
> > 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> > unused=vfio-pci
> >
> > Other Network devices
> > =====================
> > <none>
> >
> > My understanding is, it should consider the devices under "Network devices
> > using DPDK-compatible driver", but it is not.
> > The nic that i am using Intel 82599, which is supported by dpdk.
> >
> > can someone help me to understand what is wrong here?
> >
> > Thanks,
> > Venkat
> >  

Check the PCI id's of the devices. I have seen in older releases
where there are some subtypes of Intel Ethernet devices
which are supported by Linux kernel, but not yet in DPDK driver table
(and in some cases small changes to MAC code are needed).

Re: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[venkataprasad k]

I believe these are supported by DPDK.
here is the lspci output.

[root@localhost dpdk-stable-17.11.1]# lspci -nn | grep 155d
03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)
03:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)
05:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)
05:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)
41:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)
41:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)
45:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)
45:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
Bypass Adapter [8086:155d] (rev 01)

Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=

Thanks,
Venkat


On Tue, Apr 24, 2018 at 10:36 AM, Stephen Hemminger <
stephen@networkplumber.org> wrote:

> On Tue, 24 Apr 2018 09:44:54 +0530
> venkataprasad k <prasaddml@gmail.com> wrote:
>
> > Hi Rami,
> >
> > Thanks for your reply.
> > yes. i already did the binding and here is the output.
> > [root@localhost dpdk-stable-17.11.1]# ./usertools/dpdk-devbind.py -s
> >
> > Network devices using DPDK-compatible driver
> > ============================================
> > 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> >
> > Network devices using kernel driver
> > ===================================
> > 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> > unused=vfio-pci *Active*
> > 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> > unused=vfio-pci
> > 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> > unused=vfio-pci
> > 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> > unused=vfio-pci
> >
> > Other Network devices
> > =====================
> > <none>
> >
> > similarly tried with igb_uio as well, but i see the same result ( "EAL:
> No
> > probed ethernet devices" )
> >
> > Thanks,
> > Venkat
> >
> >
> > On Mon, Apr 23, 2018 at 9:55 PM, Rosen, Rami <rami.rosen@intel.com>
> wrote:
> >
> > > Hi,
> > > You need to bind a device to DPDK before launching testpmd, with the
> > > usertools/dpdk-devbind.py script. Did you do it? What is the output
> > > of
> > > ./usertools/dpdk-devbind.py -s
> > > on your host ? do you see any entries under "Network devices using
> > > DPDK-compatible driver" when running ./usertools/dpdk-devbind.py -s?
> > >
> > > Please take a look in the "Linux Getting Started Guide", section
> > > 4.4: "Binding and Unbinding Network Ports to/from the Kernel Modules"
> > >
> > > http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html#
> > > binding-and-unbinding-network-ports-to-from-the-kernel-modules
> > >
> > > Regards,
> > > Rami Rosen
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: users [mailto:users-bounces@dpdk.org] On Behalf Of
> venkataprasad k
> > > Sent: Monday, April 23, 2018 15:35
> > > To: users@dpdk.org
> > > Subject: [dpdk-users] testpmd + EAL: No probed ethernet devices +
> > > dpdk-17.11.1
> > >
> > > Hello,
> > >
> > > I am trying to run testpmd application and getting the following error
> > > "EAL: No probed ethernet devices"
> > >
> > > version: dpdk-stable-17.11.1
> > > Log:
> > > [root@localhost dpdk-stable-17.11.1]#  ./build/app/testpmd –l
> 12,13,14 –n
> > > 4
> > > -- -i
> > > EAL: Detected 80 lcore(s)
> > > EAL: No free hugepages reported in hugepages-1048576kB
> > > EAL: Probing VFIO support...
> > > EAL: VFIO support initialized
> > > EAL: PCI device 0000:01:00.0 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > EAL: PCI device 0000:01:00.1 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > EAL: PCI device 0000:01:00.2 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > EAL: PCI device 0000:01:00.3 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > *EAL: No probed ethernet devices*
> > > Interactive-mode selected
> > > USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=779456,
> size=2176,
> > > socket=0
> > > USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=779456,
> size=2176,
> > > socket=1
> > > USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=779456,
> size=2176,
> > > socket=2
> > > USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=779456,
> size=2176,
> > > socket=3
> > > Done
> > > testpmd> show config fwd
> > > io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support
> > > enabled, MP over anonymous pages disabled
> > >
> > > testpmd>
> > >
> > >
> > > from the dpdk-setup script, i see there are devices supported by dpdk
> > >
> > > Network devices using DPDK-compatible driver
> ==============================
> > > ==============
> > > 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > >
> > > Network devices using kernel driver
> > > ===================================
> > > 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> > > unused=vfio-pci *Active*
> > > 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> > > unused=vfio-pci
> > > 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> > > unused=vfio-pci
> > > 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> > > unused=vfio-pci
> > >
> > > Other Network devices
> > > =====================
> > > <none>
> > >
> > > My understanding is, it should consider the devices under "Network
> devices
> > > using DPDK-compatible driver", but it is not.
> > > The nic that i am using Intel 82599, which is supported by dpdk.
> > >
> > > can someone help me to understand what is wrong here?
> > >
> > > Thanks,
> > > Venkat
> > >
>
> Check the PCI id's of the devices. I have seen in older releases
> where there are some subtypes of Intel Ethernet devices
> which are supported by Linux kernel, but not yet in DPDK driver table
> (and in some cases small changes to MAC code are needed).
>

Re: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[Rosen, Rami]

Hi, Venkat,

In DPDK 17.11.1 stable, which is the one you use, support for
8086:155D depends on that
CONFIG_RTE_LIBRTE_IXGBE_BYPASS is set.

See:

In drivers/net/ixgbe/ixgbe_bypass_defines.h

/* extractions from ixgbe_type.h */
#define IXGBE_DEV_ID_82599_BYPASS       0x155D


/* extractions from ixgbe_type.h */
#define IXGBE_DEV_ID_82599_BYPASS       0x155D

In drivers/net/ixgbe/ixgbe_ethdev.c:
/*
* The set of PCI devices this driver supports
*/
static const struct rte_pci_id pci_id_ixgbe_map[] = {
...
#ifdef RTE_LIBRTE_IXGBE_BYPASS
        { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,  IXGBE_DEV_ID_82599_BYPASS) },
#endif
…

By default, CONFIG_RTE_LIBRTE_IXGBE_BYPASS is not set in DPDK 17.11.1


Please check:
$more  build/.config | grep CONFIG_RTE_LIBRTE_IXGBE_BYPASS
Do you get the following ?
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n

In case you do, maybe try to change it to
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=y
and run make clean and make for the DPDK tree, and then bind and run testpmd app again, and post here the log.

Regards,
Rami Rosen



From: venkataprasad k [mailto:prasaddml@gmail.com]
Sent: Tuesday, April 24, 2018 12:24
To: Stephen Hemminger <stephen@networkplumber.org>
Cc: Rosen, Rami <rami.rosen@intel.com>; users@dpdk.org
Subject: Re: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

I believe these are supported by DPDK.
here is the lspci output.

[root@localhost dpdk-stable-17.11.1]# lspci -nn | grep 155d
03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)
03:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)
05:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)
05:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)
41:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)
41:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)
45:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)
45:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server Bypass Adapter [8086:155d] (rev 01)

Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=

Thanks,
Venkat


On Tue, Apr 24, 2018 at 10:36 AM, Stephen Hemminger <stephen@networkplumber.org<mailto:stephen@networkplumber.org>> wrote:
On Tue, 24 Apr 2018 09:44:54 +0530
venkataprasad k <prasaddml@gmail.com<mailto:prasaddml@gmail.com>> wrote:

> Hi Rami,
>
> Thanks for your reply.
> yes. i already did the binding and here is the output.
> [root@localhost dpdk-stable-17.11.1]# ./usertools/dpdk-devbind.py -s
>
> Network devices using DPDK-compatible driver
> ============================================
> 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
>
> Network devices using kernel driver
> ===================================
> 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> unused=vfio-pci *Active*
> 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> unused=vfio-pci
> 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> unused=vfio-pci
> 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> unused=vfio-pci
>
> Other Network devices
> =====================
> <none>
>
> similarly tried with igb_uio as well, but i see the same result ( "EAL: No
> probed ethernet devices" )
>
> Thanks,
> Venkat
>
>
> On Mon, Apr 23, 2018 at 9:55 PM, Rosen, Rami <rami.rosen@intel.com<mailto:rami.rosen@intel.com>> wrote:
>
> > Hi,
> > You need to bind a device to DPDK before launching testpmd, with the
> > usertools/dpdk-devbind.py script. Did you do it? What is the output
> > of
> > ./usertools/dpdk-devbind.py -s
> > on your host ? do you see any entries under "Network devices using
> > DPDK-compatible driver" when running ./usertools/dpdk-devbind.py -s?
> >
> > Please take a look in the "Linux Getting Started Guide", section
> > 4.4: "Binding and Unbinding Network Ports to/from the Kernel Modules"
> >
> > http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html#<http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html>
> > binding-and-unbinding-network-ports-to-from-the-kernel-modules
> >
> > Regards,
> > Rami Rosen
> >
> >
> >
> > -----Original Message-----
> > From: users [mailto:users-bounces@dpdk.org<mailto:users-bounces@dpdk.org>] On Behalf Of venkataprasad k
> > Sent: Monday, April 23, 2018 15:35
> > To: users@dpdk.org<mailto:users@dpdk.org>
> > Subject: [dpdk-users] testpmd + EAL: No probed ethernet devices +
> > dpdk-17.11.1
> >
> > Hello,
> >
> > I am trying to run testpmd application and getting the following error
> > "EAL: No probed ethernet devices"
> >
> > version: dpdk-stable-17.11.1
> > Log:
> > [root@localhost dpdk-stable-17.11.1]#  ./build/app/testpmd –l 12,13,14 –n
> > 4
> > -- -i
> > EAL: Detected 80 lcore(s)
> > EAL: No free hugepages reported in hugepages-1048576kB
> > EAL: Probing VFIO support...
> > EAL: VFIO support initialized
> > EAL: PCI device 0000:01:00.0 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:01:00.1 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:01:00.2 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:01:00.3 on NUMA socket 0
> > EAL:   probe driver: 8086:1521 net_e1000_igb
> > *EAL: No probed ethernet devices*
> > Interactive-mode selected
> > USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=779456, size=2176,
> > socket=0
> > USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=779456, size=2176,
> > socket=1
> > USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=779456, size=2176,
> > socket=2
> > USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=779456, size=2176,
> > socket=3
> > Done
> > testpmd> show config fwd
> > io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support
> > enabled, MP over anonymous pages disabled
> >
> > testpmd>
> >
> >
> > from the dpdk-setup script, i see there are devices supported by dpdk
> >
> > Network devices using DPDK-compatible driver ==============================
> > ==============
> > 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> >
> > Network devices using kernel driver
> > ===================================
> > 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> > unused=vfio-pci *Active*
> > 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> > unused=vfio-pci
> > 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> > unused=vfio-pci
> > 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> > unused=vfio-pci
> >
> > Other Network devices
> > =====================
> > <none>
> >
> > My understanding is, it should consider the devices under "Network devices
> > using DPDK-compatible driver", but it is not.
> > The nic that i am using Intel 82599, which is supported by dpdk.
> >
> > can someone help me to understand what is wrong here?
> >
> > Thanks,
> > Venkat
> >
Check the PCI id's of the devices. I have seen in older releases
where there are some subtypes of Intel Ethernet devices
which are supported by Linux kernel, but not yet in DPDK driver table
(and in some cases small changes to MAC code are needed).

Re: [dpdk-users] testpmd + EAL: No probed ethernet devices + dpdk-17.11.1

[venkataprasad k]

Thanks for your reply.
After setting CONFIG_RTE_LIBRTE_IXGBE_BYPASS in the config, it started
working.

here is the log:
[root@localhost dpdk-stable-17.11.1]# ./build/app/testpmd –l 12,13,14 –n 4
-- -i
EAL: Detected 80 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: PCI device 0000:01:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.2 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:01:00.3 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL:   probe driver: 8086:155d net_ixgbe
EAL: PCI device 0000:03:00.1 on NUMA socket 0
EAL:   probe driver: 8086:155d net_ixgbe
EAL: PCI device 0000:05:00.0 on NUMA socket 0
EAL:   probe driver: 8086:155d net_ixgbe
EAL: PCI device 0000:05:00.1 on NUMA socket 0
EAL:   probe driver: 8086:155d net_ixgbe
EAL: PCI device 0000:41:00.0 on NUMA socket 1
EAL:   probe driver: 8086:155d net_ixgbe
EAL: PCI device 0000:41:00.1 on NUMA socket 1
EAL:   probe driver: 8086:155d net_ixgbe
EAL: PCI device 0000:45:00.0 on NUMA socket 1
EAL:   probe driver: 8086:155d net_ixgbe
EAL: PCI device 0000:45:00.1 on NUMA socket 1
EAL:   probe driver: 8086:155d net_ixgbe


Thanks,
Venkat


On Tue, Apr 24, 2018 at 6:01 PM, Rosen, Rami <rami.rosen@intel.com> wrote:

> Hi, Venkat,
>
>
>
> In DPDK 17.11.1 stable, which is the one you use, support for
>
> 8086:155D depends on that
>
> CONFIG_RTE_LIBRTE_IXGBE_BYPASS is set.
>
>
>
> See:
>
>
>
> In drivers/net/ixgbe/ixgbe_bypass_defines.h
>
>
>
> /* extractions from ixgbe_type.h */
>
> #define IXGBE_DEV_ID_82599_BYPASS       0x155D
>
>
>
>
>
> /* extractions from ixgbe_type.h */
>
> #define IXGBE_DEV_ID_82599_BYPASS       0x155D
>
>
>
> In drivers/net/ixgbe/ixgbe_ethdev.c:
>
> /*
>
> * The set of PCI devices this driver supports
>
> */
>
> static const struct rte_pci_id pci_id_ixgbe_map[] = {
>
> ...
>
> #ifdef RTE_LIBRTE_IXGBE_BYPASS
>
>         { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID,
> IXGBE_DEV_ID_82599_BYPASS) },
>
> #endif
>
> …
>
>
>
> By default, CONFIG_RTE_LIBRTE_IXGBE_BYPASS is not set in DPDK 17.11.1
>
>
>
>
>
> Please check:
>
> $more  build/.config | grep CONFIG_RTE_LIBRTE_IXGBE_BYPASS
>
> Do you get the following ?
>
> CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
>
>
>
> In case you do, maybe try to change it to
>
> CONFIG_RTE_LIBRTE_IXGBE_BYPASS=y
>
> and run make clean and make for the DPDK tree, and then bind and run
> testpmd app again, and post here the log.
>
>
>
> Regards,
>
> Rami Rosen
>
>
>
>
>
>
>
> *From:* venkataprasad k [mailto:prasaddml@gmail.com]
> *Sent:* Tuesday, April 24, 2018 12:24
> *To:* Stephen Hemminger <stephen@networkplumber.org>
> *Cc:* Rosen, Rami <rami.rosen@intel.com>; users@dpdk.org
> *Subject:* Re: [dpdk-users] testpmd + EAL: No probed ethernet devices +
> dpdk-17.11.1
>
>
>
> I believe these are supported by DPDK.
>
> here is the lspci output.
>
>
>
> [root@localhost dpdk-stable-17.11.1]# lspci -nn | grep 155d
>
> 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
> 03:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
> 05:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
> 05:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
> 41:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
> 41:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
> 45:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
> 45:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Server
> Bypass Adapter [8086:155d] (rev 01)
>
>
>
> Network devices using DPDK-compatible driver
>
> ============================================
>
> 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
> 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
> 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
> 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
> 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
> 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
> 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
> 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=igb_uio unused=
>
>
>
> Thanks,
>
> Venkat
>
>
>
>
>
> On Tue, Apr 24, 2018 at 10:36 AM, Stephen Hemminger <
> stephen@networkplumber.org> wrote:
>
> On Tue, 24 Apr 2018 09:44:54 +0530
> venkataprasad k <prasaddml@gmail.com> wrote:
>
> > Hi Rami,
> >
> > Thanks for your reply.
> > yes. i already did the binding and here is the output.
> > [root@localhost dpdk-stable-17.11.1]# ./usertools/dpdk-devbind.py -s
> >
> > Network devices using DPDK-compatible driver
> > ============================================
> > 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> >
> > Network devices using kernel driver
> > ===================================
> > 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> > unused=vfio-pci *Active*
> > 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> > unused=vfio-pci
> > 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> > unused=vfio-pci
> > 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> > unused=vfio-pci
> >
> > Other Network devices
> > =====================
> > <none>
> >
> > similarly tried with igb_uio as well, but i see the same result ( "EAL:
> No
> > probed ethernet devices" )
> >
> > Thanks,
> > Venkat
> >
> >
> > On Mon, Apr 23, 2018 at 9:55 PM, Rosen, Rami <rami.rosen@intel.com>
> wrote:
> >
> > > Hi,
> > > You need to bind a device to DPDK before launching testpmd, with the
> > > usertools/dpdk-devbind.py script. Did you do it? What is the output
> > > of
> > > ./usertools/dpdk-devbind.py -s
> > > on your host ? do you see any entries under "Network devices using
> > > DPDK-compatible driver" when running ./usertools/dpdk-devbind.py -s?
> > >
> > > Please take a look in the "Linux Getting Started Guide", section
> > > 4.4: "Binding and Unbinding Network Ports to/from the Kernel Modules"
> > >
> > > http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html#
> <http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html>
> > > binding-and-unbinding-network-ports-to-from-the-kernel-modules
> > >
> > > Regards,
> > > Rami Rosen
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: users [mailto:users-bounces@dpdk.org] On Behalf Of
> venkataprasad k
> > > Sent: Monday, April 23, 2018 15:35
> > > To: users@dpdk.org
> > > Subject: [dpdk-users] testpmd + EAL: No probed ethernet devices +
> > > dpdk-17.11.1
> > >
> > > Hello,
> > >
> > > I am trying to run testpmd application and getting the following error
> > > "EAL: No probed ethernet devices"
> > >
> > > version: dpdk-stable-17.11.1
> > > Log:
> > > [root@localhost dpdk-stable-17.11.1]#  ./build/app/testpmd –l
> 12,13,14 –n
> > > 4
> > > -- -i
> > > EAL: Detected 80 lcore(s)
> > > EAL: No free hugepages reported in hugepages-1048576kB
> > > EAL: Probing VFIO support...
> > > EAL: VFIO support initialized
> > > EAL: PCI device 0000:01:00.0 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > EAL: PCI device 0000:01:00.1 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > EAL: PCI device 0000:01:00.2 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > EAL: PCI device 0000:01:00.3 on NUMA socket 0
> > > EAL:   probe driver: 8086:1521 net_e1000_igb
> > > *EAL: No probed ethernet devices*
> > > Interactive-mode selected
> > > USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=779456,
> size=2176,
> > > socket=0
> > > USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=779456,
> size=2176,
> > > socket=1
> > > USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=779456,
> size=2176,
> > > socket=2
> > > USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=779456,
> size=2176,
> > > socket=3
> > > Done
> > > testpmd> show config fwd
> > > io packet forwarding - ports=0 - cores=0 - streams=0 - NUMA support
> > > enabled, MP over anonymous pages disabled
> > >
> > > testpmd>
> > >
> > >
> > > from the dpdk-setup script, i see there are devices supported by dpdk
> > >
> > > Network devices using DPDK-compatible driver
> ==============================
> > > ==============
> > > 0000:03:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:03:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:05:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:05:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:41:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:41:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:45:00.0 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > > 0000:45:00.1 'Ethernet Server Bypass Adapter 155d' drv=vfio-pci unused=
> > >
> > > Network devices using kernel driver
> > > ===================================
> > > 0000:01:00.0 'I350 Gigabit Network Connection 1521' if=enp1s0f0 drv=igb
> > > unused=vfio-pci *Active*
> > > 0000:01:00.1 'I350 Gigabit Network Connection 1521' if=enp1s0f1 drv=igb
> > > unused=vfio-pci
> > > 0000:01:00.2 'I350 Gigabit Network Connection 1521' if=enp1s0f2 drv=igb
> > > unused=vfio-pci
> > > 0000:01:00.3 'I350 Gigabit Network Connection 1521' if=enp1s0f3 drv=igb
> > > unused=vfio-pci
> > >
> > > Other Network devices
> > > =====================
> > > <none>
> > >
> > > My understanding is, it should consider the devices under "Network
> devices
> > > using DPDK-compatible driver", but it is not.
> > > The nic that i am using Intel 82599, which is supported by dpdk.
> > >
> > > can someone help me to understand what is wrong here?
> > >
> > > Thanks,
> > > Venkat
> > >
>
> Check the PCI id's of the devices. I have seen in older releases
> where there are some subtypes of Intel Ethernet devices
> which are supported by Linux kernel, but not yet in DPDK driver table
> (and in some cases small changes to MAC code are needed).
>
>
>