* Re: [dpdk-users] FATAL: Module uio not found [not found] <CACxh0QSc-56Tevr0Mfbxkq=TJTRKnL+_TS7EeKUKDfb7PhHW_Q@mail.gmail.com> @ 2017-09-12 9:01 ` Pragash Vijayaragavan 2017-09-12 12:31 ` RanjithKumar 0 siblings, 1 reply; 3+ messages in thread From: Pragash Vijayaragavan @ 2017-09-12 9:01 UTC (permalink / raw) To: RanjithKumar; +Cc: users Hi, try modprobe igb_uio/ vfio-pci /uio_pci_generic Thanks, Pragash Vijayaragavan Grad Student at Rochester Institute of Technology email : pxv3620@rit.edu ph : 585 764 4662 On Tue, Sep 12, 2017 at 4:54 AM, RanjithKumar <ranjithdvk@gmail.com> wrote: > Hi All, > > I have installed DPDK in open stack lunched virtual machine and Modrobe is > failing with below error > > modprobe: FATAL: Module uio not found > > Any input? > > Regards, > Ranjith > ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] FATAL: Module uio not found 2017-09-12 9:01 ` [dpdk-users] FATAL: Module uio not found Pragash Vijayaragavan @ 2017-09-12 12:31 ` RanjithKumar 2017-09-14 5:15 ` Tan, Jianfeng 0 siblings, 1 reply; 3+ messages in thread From: RanjithKumar @ 2017-09-12 12:31 UTC (permalink / raw) To: pxv3620; +Cc: users Hello All, modprobe uio did not work , and below is the output VM NIC current drivers. ubuntu@mysite-vpgwu-slice1-25:~/dpdk-2.0.0/tools$ ./dpdk_nic_bind.py --status Network devices using DPDK-compatible driver ============================================ <none> Network devices using kernel driver =================================== 0000:00:03.0 'Virtio network device' if= drv=virtio-pci unused= 0000:00:04.0 'Virtio network device' if= drv=virtio-pci unused= 0000:00:05.0 'Virtio network device' if= drv=virtio-pci unused= 0000:00:06.0 'Virtio network device' if= drv=virtio-pci unused= 0000:00:07.0 'Virtio network device' if= drv=virtio-pci unused= Other network devices ===================== <none> So i followed below steps to use virtio-pci 1. modprobe vfio enable_unsafe_noiommu_mode=1 2. modprobe vfio-pci 3. ./dpdk_nic_bind.py -b vfio-pci 0000:00:04.0 But i am getting below error while binding the Virtio NIC to DPDK *Error: bind failed for 0000:00:04.0 - Cannot bind to driver vfio-pci Error: unbind failed for 0000:00:04.0 - Cannot open /sys/bus/pci/drivers//unbind* *Any input?* *Regards,* *Ranjith* Regards, Ranjith On Tue, Sep 12, 2017 at 2:31 PM, Pragash Vijayaragavan <pxv3620@rit.edu> wrote: > Hi, > > try modprobe igb_uio/ vfio-pci /uio_pci_generic > > > > Thanks, > > Pragash Vijayaragavan > Grad Student at Rochester Institute of Technology > email : pxv3620@rit.edu > ph : 585 764 4662 <(585)%20764-4662> > > > On Tue, Sep 12, 2017 at 4:54 AM, RanjithKumar <ranjithdvk@gmail.com> > wrote: > >> Hi All, >> >> I have installed DPDK in open stack lunched virtual machine and Modrobe is >> failing with below error >> >> modprobe: FATAL: Module uio not found >> >> Any input? >> >> Regards, >> Ranjith >> > > ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] FATAL: Module uio not found 2017-09-12 12:31 ` RanjithKumar @ 2017-09-14 5:15 ` Tan, Jianfeng 0 siblings, 0 replies; 3+ messages in thread From: Tan, Jianfeng @ 2017-09-14 5:15 UTC (permalink / raw) To: RanjithKumar, pxv3620; +Cc: users > -----Original Message----- > From: users [mailto:users-bounces@dpdk.org] On Behalf Of RanjithKumar > Sent: Tuesday, September 12, 2017 8:31 PM > To: pxv3620@rit.edu > Cc: users > Subject: Re: [dpdk-users] FATAL: Module uio not found > > Hello All, > > modprobe uio did not work , and below is the output VM NIC current drivers. > > ubuntu@mysite-vpgwu-slice1-25:~/dpdk-2.0.0/tools$ ./dpdk_nic_bind.py > --status > > Network devices using DPDK-compatible driver > ============================================ > <none> > > Network devices using kernel driver > =================================== > 0000:00:03.0 'Virtio network device' if= drv=virtio-pci unused= > 0000:00:04.0 'Virtio network device' if= drv=virtio-pci unused= > 0000:00:05.0 'Virtio network device' if= drv=virtio-pci unused= > 0000:00:06.0 'Virtio network device' if= drv=virtio-pci unused= > 0000:00:07.0 'Virtio network device' if= drv=virtio-pci unused= > > Other network devices > ===================== > <none> > > So i followed below steps to use virtio-pci > > > 1. modprobe vfio enable_unsafe_noiommu_mode=1 > 2. modprobe vfio-pci > 3. ./dpdk_nic_bind.py -b vfio-pci 0000:00:04.0 > > But i am getting below error while binding the Virtio NIC to DPDK So far you cannot bind virtio devices with normal vfio-pci as the vIOMMU support is not upstreamed yet (https://patchwork.kernel.org/patch/9670273/). Instead, you can bind virtio devices to vfio-pci (no-iommu mode). You can enable it like: $ modprobe vfio enable_unsafe_noiommu_mode=1 $ modprobe vfio-pci Thanks, Jianfeng > > *Error: bind failed for 0000:00:04.0 - Cannot bind to driver vfio-pci > Error: unbind failed for 0000:00:04.0 - Cannot open > /sys/bus/pci/drivers//unbind* > > *Any input?* > > *Regards,* > *Ranjith* > > > > Regards, > Ranjith > > > On Tue, Sep 12, 2017 at 2:31 PM, Pragash Vijayaragavan <pxv3620@rit.edu> > wrote: > > > Hi, > > > > try modprobe igb_uio/ vfio-pci /uio_pci_generic > > > > > > > > Thanks, > > > > Pragash Vijayaragavan > > Grad Student at Rochester Institute of Technology > > email : pxv3620@rit.edu > > ph : 585 764 4662 <(585)%20764-4662> > > > > > > On Tue, Sep 12, 2017 at 4:54 AM, RanjithKumar <ranjithdvk@gmail.com> > > wrote: > > > >> Hi All, > >> > >> I have installed DPDK in open stack lunched virtual machine and Modrobe > is > >> failing with below error > >> > >> modprobe: FATAL: Module uio not found > >> > >> Any input? > >> > >> Regards, > >> Ranjith > >> > > > > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-09-14 5:15 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <CACxh0QSc-56Tevr0Mfbxkq=TJTRKnL+_TS7EeKUKDfb7PhHW_Q@mail.gmail.com> 2017-09-12 9:01 ` [dpdk-users] FATAL: Module uio not found Pragash Vijayaragavan 2017-09-12 12:31 ` RanjithKumar 2017-09-14 5:15 ` Tan, Jianfeng
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).