DPDK patches and discussions
 help / color / mirror / Atom feed
From: David Liu <dliu@iol.unh.edu>
To: ferruh.yigit@intel.com
Cc: dev@dpdk.org, lylavoie@iol.unh.edu, tmonjalon@nvidia.com,
	David Liu <dliu@iol.unh.edu>
Subject: [dpdk-dev]  [PATCH V1] testpmd: add eeprom/module eeprom display
Date: Tue,  1 Sep 2020 14:56:54 -0400	[thread overview]
Message-ID: <20200901185654.76346-1-dliu@iol.unh.edu> (raw)

Add EEPROM dump command
  "show port <port_id> eeprom"
Add module EEPROM dump command
     "show port <port_id> module_eeprom"
Commands will dump the content of the 
EEPROM/module EEPROM for the selected port.

Signed-off-by: David Liu <dliu@iol.unh.edu>
---
 app/test-pmd/cmdline.c                      |  87 ++++++++++++++
 app/test-pmd/config.c                       | 126 ++++++++++++++++++++
 app/test-pmd/testpmd.h                      |   2 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  14 +++
 4 files changed, 229 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a037a55c6..71c98dd96 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -166,6 +166,12 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"show port (info|stats|summary|xstats|fdir|stat_qmap|dcb_tc|cap) (port_id|all)\n"
 			"    Display information for port_id, or all.\n\n"
 
+			"show port (port_id) eeprom \n"
+			"    Display the EEPROM infomation for port x.\n\n"
+
+			"show port (port_id) module_eeprom \n"
+			"    Display the port moudle EEPROM infomation for port x.\n\n"
+
 			"show port X rss reta (size) (mask0,mask1,...)\n"
 			"    Display the rss redirection table entry indicated"
 			" by masks on port X. size is used to indicate the"
@@ -7594,6 +7600,85 @@ cmdline_parse_inst_t cmd_showdevice = {
 		NULL,
 	},
 };
+
+/* ** SHOW EEPROM INFO *** */
+struct cmd_showeeprom_result {
+       cmdline_fixed_string_t show;
+       cmdline_fixed_string_t port;
+       cmdline_fixed_string_t type;
+        uint16_t portnum;
+};
+
+static void cmd_showeeprom_parsed(void *parsed_result,
+               __rte_unused struct cmdline *cl,
+               __rte_unused void *data)
+{
+       struct cmd_showeeprom_result *res = parsed_result;
+
+       port_eeprom_display(res->portnum);
+}
+
+cmdline_parse_token_string_t cmd_showeeprom_show =
+       TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, show, "show");
+cmdline_parse_token_string_t cmd_showeeprom_port =
+       TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, port, "port");
+cmdline_parse_token_num_t cmd_showeeprom_portnum =
+       TOKEN_NUM_INITIALIZER(struct cmd_showeeprom_result, portnum, UINT16);
+cmdline_parse_token_string_t cmd_showeeprom_type =
+       TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, type, "eeprom");
+
+cmdline_parse_inst_t cmd_showeeprom = {
+       .f = cmd_showeeprom_parsed,
+       .data = NULL,
+       .help_str = "show port <port_id> eeprom",
+       .tokens = {
+               (void *)&cmd_showeeprom_show,
+               (void *)&cmd_showeeprom_port,
+               (void *)&cmd_showeeprom_portnum,
+               (void *)&cmd_showeeprom_type,
+               NULL,
+       },
+};
+
+/* ** SHOW module EEPROM INFO *** */
+struct cmd_showmoduleeeprom_result {
+       cmdline_fixed_string_t show;
+       cmdline_fixed_string_t port;
+       cmdline_fixed_string_t type;
+        uint16_t portnum;
+};
+
+static void cmd_showmoduleeeprom_parsed(void *parsed_result,
+               __rte_unused struct cmdline *cl,
+               __rte_unused void *data)
+{
+       struct cmd_showmoduleeeprom_result *res = parsed_result;
+
+       port_module_eeprom_display(res->portnum);
+}
+
+cmdline_parse_token_string_t cmd_showmoduleeeprom_show =
+       TOKEN_STRING_INITIALIZER(struct cmd_showmoduleeeprom_result, show, "show");
+cmdline_parse_token_string_t cmd_showmoduleeeprom_port =
+       TOKEN_STRING_INITIALIZER(struct cmd_showmoduleeeprom_result, port, "port");
+cmdline_parse_token_num_t cmd_showmoduleeeprom_portnum =
+	TOKEN_NUM_INITIALIZER(struct cmd_showmoduleeeprom_result, portnum, UINT16);
+cmdline_parse_token_string_t cmd_showmoduleeeprom_type =
+	TOKEN_STRING_INITIALIZER(struct cmd_showmoduleeeprom_result, type, "module_eeprom");
+
+cmdline_parse_inst_t cmd_showmoduleeeprom = {
+	.f = cmd_showmoduleeeprom_parsed,
+	.data = NULL,
+	.help_str = "show port <port_id> module_eeprom",
+	.tokens = {
+		(void *)&cmd_showmoduleeeprom_show,
+		(void *)&cmd_showmoduleeeprom_port,
+		(void *)&cmd_showmoduleeeprom_portnum,
+		(void *)&cmd_showmoduleeeprom_type,
+		NULL,
+	},
+};
+
 /* *** SHOW QUEUE INFO *** */
 struct cmd_showqueue_result {
 	cmdline_fixed_string_t show;
@@ -19325,6 +19410,8 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_load_from_file,
 	(cmdline_parse_inst_t *)&cmd_showport,
 	(cmdline_parse_inst_t *)&cmd_showqueue,
+        (cmdline_parse_inst_t *)&cmd_showeeprom,
+	(cmdline_parse_inst_t *)&cmd_showmoduleeeprom,
 	(cmdline_parse_inst_t *)&cmd_showportall,
 	(cmdline_parse_inst_t *)&cmd_showdevice,
 	(cmdline_parse_inst_t *)&cmd_showcfg,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 8cf84ccd3..ea026a8eb 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -49,6 +49,7 @@
 #include <rte_pmd_bnxt.h>
 #endif
 #include <rte_gro.h>
+#include <rte_hexdump.h>
 
 #include "testpmd.h"
 
@@ -710,6 +711,131 @@ port_summary_display(portid_t port_id)
 		(unsigned int) link.link_speed);
 }
 
+void
+port_eeprom_display(portid_t port_id)
+{
+       struct rte_dev_eeprom_info einfo;
+       int ret;
+
+       if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+               print_valid_ports();
+               return;
+       }
+
+       int len_eeprom = rte_eth_dev_get_eeprom_length(port_id);
+
+       if(len_eeprom < 0) {
+               switch (len_eeprom) {
+               case -ENODEV:
+		       printf("port index %d invalid\n", port_id);
+		       break;
+	       case -ENOTSUP:
+                       printf("operation not supported by device\n");
+                       break;
+               case -EIO:
+		       printf("device is removed\n");
+		       break;
+               default:
+                       printf("Unable to get module EEPROM: %d\n", ret);
+                       break;
+               }
+	       return;
+       }
+
+       char buf[len_eeprom];
+       printf("\nPort: %d\nModule EEPROM:\n", port_id);
+
+       einfo.offset = 0;
+       einfo.length = len_eeprom;
+       einfo.data = buf;
+
+       ret = rte_eth_dev_get_eeprom(port_id, &einfo);
+       if (ret != 0) {
+               switch (ret) {
+               case -ENODEV:
+		       printf("port index %d invalid\n", port_id);
+		       break;
+               case -ENOTSUP:
+                       printf("operation not supported by device\n");
+		       break;
+               case -EIO:
+		       printf("device is removed\n");
+		       break;
+	       default:
+		       printf("Unable to get module EEPROM: %d\n", ret);
+		       break;
+	       }
+	       return;
+       }
+       
+       rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+       printf("Finish -- Total EEPROM length: %i bytes\n", len_eeprom);
+}
+
+void
+port_module_eeprom_displao(portid_t port_id)
+{
+       struct rte_eth_dev_module_info minfo;
+       struct rte_dev_eeprom_info einfo;
+       int ret;
+
+       if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+               print_valid_ports();
+               return;
+       }
+
+       ret = rte_eth_dev_get_module_info(port_id, &minfo);
+       if (ret != 0) {
+               switch (ret) {
+               case -ENODEV:
+                       printf("port index %d invalid\n", port_id);
+                       break;
+               case -ENOTSUP:
+                       printf("operation not supported by device\n");
+                       break;
+               case -EIO:
+                       printf("device Iis removed\n");
+                       break;
+               default:
+                       printf("Unable to get module info: %d\n", ret);
+                       break;
+               }
+               return;
+       }
+
+       if (minfo.eeprom_len < 0){
+               printf("invalid module eeprom length");
+               return;
+       }
+
+       char buf[minfo.eeprom_len];
+       einfo.offset = 0;
+       einfo.length = minfo.eeprom_len;
+       einfo.data = buf;
+
+       ret = rte_eth_dev_get_module_eeprom(port_id, &einfo);
+       if (ret != 0) {
+               switch (ret) {
+               case -ENODEV:
+                       printf("port index %d invalid\n", port_id);
+                       break;
+               case -ENOTSUP:
+                       printf("operation not supported by device\n");
+                       break;
+               case -EIO:
+                       printf("device Iis removed\n");
+                       break;
+               default:
+                       printf("Unable to get module EEPROM: %d\n", ret);
+                       break;
+               }
+               return;
+       }
+
+       printf("\nPort: %d\nEEPROM:\n", port_id);
+       rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+}
+
 void
 port_offload_cap_display(portid_t port_id)
 {
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 7a7c73f79..e3a0d17e5 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -714,6 +714,8 @@ void nic_stats_mapping_display(portid_t port_id);
 void device_infos_display(const char *identifier);
 void port_infos_display(portid_t port_id);
 void port_summary_display(portid_t port_id);
+void port_eeprom_display(portid_t port_id);
+void port_module_eeprom_display(portid_t port_id);
 void port_summary_header_display(void);
 void port_offload_cap_display(portid_t port_id);
 void rx_queue_infos_display(portid_t port_idi, uint16_t queue_id);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 5103ff925..f3e2211ab 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -218,6 +218,20 @@ For example:
      nvgre
      vxlan-gpe
 
+show port eeprom
+~~~~~~~~~~~~~~~~
+
+Display the EEPROM informatioon for port X::
+
+   testpmd> show port (port_id) eeprom
+
+show port module eeprom
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Display the module EEPROM informatioon for port X::
+
+   testpmd> show port (port_id) module_eeprom
+
 show port rss reta
 ~~~~~~~~~~~~~~~~~~
 
-- 
2.17.1


             reply	other threads:[~2020-09-01 18:57 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-01 18:56 David Liu [this message]
  -- strict thread matches above, loose matches on Subject: below --
2020-09-10  6:00 David Liu
2020-09-10 11:47 ` Ferruh Yigit
2020-09-10 18:48   ` David Liu
2020-09-10 20:00 ` David Liu
2020-09-01 19:07 David Liu
2020-09-02 10:00 ` Ferruh Yigit
2020-09-03 16:40   ` David Liu
2020-09-03 18:40     ` Ferruh Yigit
2020-08-26 19:00 David Liu
2020-08-26 22:46 ` Ferruh Yigit
2020-08-28 13:46   ` David Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200901185654.76346-1-dliu@iol.unh.edu \
    --to=dliu@iol.unh.edu \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=lylavoie@iol.unh.edu \
    --cc=tmonjalon@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).