DPDK patches and discussions
 help / color / mirror / Atom feed
From: Simei Su <simei.su@intel.com>
To: beilei.xing@intel.com, yuying.zhang@intel.com,
	qi.z.zhang@intel.com, david.marchand@redhat.com
Cc: dev@dpdk.org, qiming.yang@intel.com,
	Simei Su <simei.su@intel.com>,
	stable@dpdk.org
Subject: [PATCH v6] net/i40e: rework maximum frame size configuration
Date: Mon, 20 Feb 2023 15:59:52 +0800	[thread overview]
Message-ID: <20230220075952.444153-1-simei.su@intel.com> (raw)
In-Reply-To: <20230202123632.56730-1-simei.su@intel.com>

One issue is reported by David Marchand that error occurs in OVS due to
the fix patch in mentioned changes below. The detailed reproduce step
and result are in https://patchwork.dpdk.org/project/dpdk/patch/
20211207085946.121032-1-dapengx.yu@intel.com/.

This patch removes unnecessary link status check and directly sets mac
config in dev_start. Also, it sets the parameter "wait to complete" true
to wait for more time to make sure adminq command execute completed.

Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
Fixes: 2184f7cdeeaa ("net/i40e: fix max frame size config at port level")
Fixes: 719469f13b11 ("net/i40e: fix jumbo frame Rx with X722")
Cc: stable@dpdk.org

Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Simei Su <simei.su@intel.com>
---
v6:
* Refine commit log.
* Remove return error.

v5:
* Fix misspelling in commit log.

v4:
* Refine commit log.
* Avoid duplicate call to set parameter "wait to complete" true.

v3:
* Put link update before interrupt enable.

v2:
* Refine commit log.
* Add link update.

 drivers/net/i40e/i40e_ethdev.c | 50 ++++++++----------------------------------
 1 file changed, 9 insertions(+), 41 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 7726a89d..30c904c 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -387,7 +387,6 @@ static int i40e_set_default_mac_addr(struct rte_eth_dev *dev,
 				      struct rte_ether_addr *mac_addr);
 
 static int i40e_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
-static void i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size);
 
 static int i40e_ethertype_filter_convert(
 	const struct rte_eth_ethertype_filter *input,
@@ -2449,7 +2448,7 @@ i40e_dev_start(struct rte_eth_dev *dev)
 			PMD_DRV_LOG(WARNING, "Fail to set phy mask");
 
 		/* Call get_link_info aq command to enable/disable LSE */
-		i40e_dev_link_update(dev, 0);
+		i40e_dev_link_update(dev, 1);
 	}
 
 	if (dev->data->dev_conf.intr_conf.rxq == 0) {
@@ -2467,8 +2466,12 @@ i40e_dev_start(struct rte_eth_dev *dev)
 			    "please call hierarchy_commit() "
 			    "before starting the port");
 
-	max_frame_size = dev->data->mtu + I40E_ETH_OVERHEAD;
-	i40e_set_mac_max_frame(dev, max_frame_size);
+	max_frame_size = dev->data->mtu ?
+		dev->data->mtu + I40E_ETH_OVERHEAD :
+		I40E_FRAME_SIZE_MAX;
+
+	/* Set the max frame size to HW*/
+	i40e_aq_set_mac_config(hw, max_frame_size, TRUE, false, 0, NULL);
 
 	return I40E_SUCCESS;
 
@@ -2809,9 +2812,6 @@ i40e_dev_set_link_down(struct rte_eth_dev *dev)
 	return i40e_phy_conf_link(hw, abilities, speed, false);
 }
 
-#define CHECK_INTERVAL             100  /* 100ms */
-#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
-
 static __rte_always_inline void
 update_link_reg(struct i40e_hw *hw, struct rte_eth_link *link)
 {
@@ -2878,6 +2878,8 @@ static __rte_always_inline void
 update_link_aq(struct i40e_hw *hw, struct rte_eth_link *link,
 	bool enable_lse, int wait_to_complete)
 {
+#define CHECK_INTERVAL             100  /* 100ms */
+#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
 	uint32_t rep_cnt = MAX_REPEAT_TIME;
 	struct i40e_link_status link_status;
 	int status;
@@ -12123,40 +12125,6 @@ i40e_cloud_filter_qinq_create(struct i40e_pf *pf)
 	return ret;
 }
 
-static void
-i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size)
-{
-	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	uint32_t rep_cnt = MAX_REPEAT_TIME;
-	struct rte_eth_link link;
-	enum i40e_status_code status;
-	bool can_be_set = true;
-
-	/*
-	 * I40E_MEDIA_TYPE_BASET link up can be ignored
-	 * I40E_MEDIA_TYPE_BASET link down that hw->phy.media_type
-	 * is I40E_MEDIA_TYPE_UNKNOWN
-	 */
-	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
-	    hw->phy.media_type != I40E_MEDIA_TYPE_UNKNOWN) {
-		do {
-			update_link_reg(hw, &link);
-			if (link.link_status)
-				break;
-			rte_delay_ms(CHECK_INTERVAL);
-		} while (--rep_cnt);
-		can_be_set = !!link.link_status;
-	}
-
-	if (can_be_set) {
-		status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false, NULL);
-		if (status != I40E_SUCCESS)
-			PMD_DRV_LOG(ERR, "Failed to set max frame size at port level");
-	} else {
-		PMD_DRV_LOG(ERR, "Set max frame size at port level not applicable on link down");
-	}
-}
-
 RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
 RTE_LOG_REGISTER_SUFFIX(i40e_logtype_driver, driver, NOTICE);
 #ifdef RTE_ETHDEV_DEBUG_RX
-- 
2.9.5


  parent reply	other threads:[~2023-02-20  8:00 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-16 10:53 [PATCH] " Simei Su
2023-01-16 11:18 ` David Marchand
2023-01-16 12:15   ` Su, Simei
2023-01-20  7:33     ` David Marchand
2023-01-20 13:57       ` Su, Simei
2023-01-20 14:46         ` David Marchand
2023-01-20 15:37           ` Su, Simei
2023-01-31  6:52 ` [PATCH v2] " Simei Su
2023-01-31  7:44   ` 答复: [[SPF Failed]][PATCH " 韩爽
2023-01-31 10:31   ` [PATCH v3] " Simei Su
2023-02-02  5:54     ` Yang, Qiming
2023-02-02 12:30     ` [PATCH v4] " Simei Su
2023-02-02 12:36       ` [PATCH v5] " Simei Su
2023-02-02 12:55         ` David Marchand
2023-02-03  3:50           ` Su, Simei
2023-02-02 13:24         ` David Marchand
2023-02-02 13:48           ` David Marchand
2023-02-03  8:38             ` Yang, Qiming
2023-02-03  8:47               ` David Marchand
2023-02-03  4:00           ` Su, Simei
2023-02-20  7:59         ` Simei Su [this message]
2023-02-27  0:35           ` [PATCH v6] " Zhang, Qi Z
2023-02-28  9:36             ` David Marchand
2023-03-02  9:51               ` Zhang, Qi Z
2023-03-22 16:50             ` Kevin Traynor
2023-03-23 14:50               ` Kevin Traynor
2023-03-24  6:32                 ` Jiang, YuX
2023-03-24  9:40                   ` Kevin Traynor
2023-03-24 10:20                     ` Jiang, YuX
2023-03-24 13:07                     ` Su, Simei
2023-03-06 12:18           ` [PATCH v7] net/i40e: fix max " Simei Su
2023-03-07  2:27             ` Zhang, Qi Z
2023-02-02 13:14       ` [PATCH v4] net/i40e: rework maximum " Kevin Traynor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230220075952.444153-1-simei.su@intel.com \
    --to=simei.su@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=qiming.yang@intel.com \
    --cc=stable@dpdk.org \
    --cc=yuying.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).