DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Yang, Qiming" <qiming.yang@intel.com>
To: "Su, Simei" <simei.su@intel.com>,
	"Xing, Beilei" <beilei.xing@intel.com>,
	 "Zhang, Yuying" <yuying.zhang@intel.com>,
	"david.marchand@redhat.com" <david.marchand@redhat.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"Zhang, Qi Z" <qi.z.zhang@intel.com>,
	"stable@dpdk.org" <stable@dpdk.org>
Subject: RE: [PATCH v3] net/i40e: rework maximum frame size configuration
Date: Thu, 2 Feb 2023 05:54:55 +0000	[thread overview]
Message-ID: <MWHPR11MB18865344B93CA6CA6D66C186E5D69@MWHPR11MB1886.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20230131103138.302942-1-simei.su@intel.com>

Hi,

> -----Original Message-----
> From: Su, Simei <simei.su@intel.com>
> Sent: Tuesday, January 31, 2023 6:32 PM
> To: Xing, Beilei <beilei.xing@intel.com>; Zhang, Yuying
> <yuying.zhang@intel.com>; david.marchand@redhat.com
> Cc: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Yang, Qiming
> <qiming.yang@intel.com>; Su, Simei <simei.su@intel.com>;
> stable@dpdk.org
> Subject: [PATCH v3] net/i40e: rework maximum frame size configuration
> 
> This patch removes unnecessary link status check and adds link update.
I think this patch is not adding link update, just delete interrupt mode check before link update.
And why you change the wait to complete from 0 to 1?

> 
> Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
> Fixes: 2184f7cdeeaa ("net/i40e: fix max frame size config at port level")
> Fixes: 719469f13b11 ("net/i40e: fix jumbo frame Rx with X722")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Simei Su <simei.su@intel.com>
> ---
> v3:
> * Put link update before interrupt enable.
> 
> v2:
> * Refine commit log.
> * Add link update.
> 
>  drivers/net/i40e/i40e_ethdev.c | 58 +++++++++++-------------------------------
>  1 file changed, 15 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 7726a89d..f5a6cec 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -387,7 +387,6 @@ static int i40e_set_default_mac_addr(struct
> rte_eth_dev *dev,
>  				      struct rte_ether_addr *mac_addr);
> 
>  static int i40e_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu); -static
> void i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size);
> 
>  static int i40e_ethertype_filter_convert(
>  	const struct rte_eth_ethertype_filter *input, @@ -2447,11 +2446,11
> @@ i40e_dev_start(struct rte_eth_dev *dev)
>  					       I40E_AQ_EVENT_MEDIA_NA),
> NULL);
>  		if (ret != I40E_SUCCESS)
>  			PMD_DRV_LOG(WARNING, "Fail to set phy mask");
> -
> -		/* Call get_link_info aq command to enable/disable LSE */
> -		i40e_dev_link_update(dev, 0);
>  	}
> 
> +	/* Call get_link_info aq command to enable/disable LSE */
> +	i40e_dev_link_update(dev, 1);
> +
>  	if (dev->data->dev_conf.intr_conf.rxq == 0) {
>  		rte_eal_alarm_set(I40E_ALARM_INTERVAL,
>  				  i40e_dev_alarm_handler, dev);
> @@ -2467,8 +2466,16 @@ i40e_dev_start(struct rte_eth_dev *dev)
>  			    "please call hierarchy_commit() "
>  			    "before starting the port");
> 
> -	max_frame_size = dev->data->mtu + I40E_ETH_OVERHEAD;
> -	i40e_set_mac_max_frame(dev, max_frame_size);
> +	max_frame_size = dev->data->mtu ?
> +		dev->data->mtu + I40E_ETH_OVERHEAD :
> +		I40E_FRAME_SIZE_MAX;
> +
> +	/* Set the max frame size to HW*/
> +	ret = i40e_aq_set_mac_config(hw, max_frame_size, TRUE, false, 0,
> NULL);
> +	if (ret) {
> +		PMD_DRV_LOG(ERR, "Fail to set mac config");
> +		return ret;
> +	}
> 
>  	return I40E_SUCCESS;
> 
> @@ -2809,9 +2816,6 @@ i40e_dev_set_link_down(struct rte_eth_dev *dev)
>  	return i40e_phy_conf_link(hw, abilities, speed, false);  }
> 
> -#define CHECK_INTERVAL             100  /* 100ms */
> -#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
> -
>  static __rte_always_inline void
>  update_link_reg(struct i40e_hw *hw, struct rte_eth_link *link)  { @@ -
> 2878,6 +2882,8 @@ static __rte_always_inline void  update_link_aq(struct
> i40e_hw *hw, struct rte_eth_link *link,
>  	bool enable_lse, int wait_to_complete)  {
> +#define CHECK_INTERVAL             100  /* 100ms */
> +#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
>  	uint32_t rep_cnt = MAX_REPEAT_TIME;
>  	struct i40e_link_status link_status;
>  	int status;
> @@ -12123,40 +12129,6 @@ i40e_cloud_filter_qinq_create(struct i40e_pf
> *pf)
>  	return ret;
>  }
> 
> -static void
> -i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size) -{
> -	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> -	uint32_t rep_cnt = MAX_REPEAT_TIME;
> -	struct rte_eth_link link;
> -	enum i40e_status_code status;
> -	bool can_be_set = true;
> -
> -	/*
> -	 * I40E_MEDIA_TYPE_BASET link up can be ignored
> -	 * I40E_MEDIA_TYPE_BASET link down that hw->phy.media_type
> -	 * is I40E_MEDIA_TYPE_UNKNOWN
> -	 */
> -	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
> -	    hw->phy.media_type != I40E_MEDIA_TYPE_UNKNOWN) {
> -		do {
> -			update_link_reg(hw, &link);
> -			if (link.link_status)
> -				break;
> -			rte_delay_ms(CHECK_INTERVAL);
> -		} while (--rep_cnt);
> -		can_be_set = !!link.link_status;
> -	}
> -
> -	if (can_be_set) {
> -		status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false,
> NULL);
> -		if (status != I40E_SUCCESS)
> -			PMD_DRV_LOG(ERR, "Failed to set max frame size at
> port level");
> -	} else {
> -		PMD_DRV_LOG(ERR, "Set max frame size at port level not
> applicable on link down");
> -	}
> -}
> -
>  RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
> RTE_LOG_REGISTER_SUFFIX(i40e_logtype_driver, driver, NOTICE);  #ifdef
> RTE_ETHDEV_DEBUG_RX
> --
> 2.9.5


  reply	other threads:[~2023-02-02  5:55 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-16 10:53 [PATCH] " Simei Su
2023-01-16 11:18 ` David Marchand
2023-01-16 12:15   ` Su, Simei
2023-01-20  7:33     ` David Marchand
2023-01-20 13:57       ` Su, Simei
2023-01-20 14:46         ` David Marchand
2023-01-20 15:37           ` Su, Simei
2023-01-31  6:52 ` [PATCH v2] " Simei Su
2023-01-31  7:44   ` 答复: [[SPF Failed]][PATCH " 韩爽
2023-01-31 10:31   ` [PATCH v3] " Simei Su
2023-02-02  5:54     ` Yang, Qiming [this message]
2023-02-02 12:30     ` [PATCH v4] " Simei Su
2023-02-02 12:36       ` [PATCH v5] " Simei Su
2023-02-02 12:55         ` David Marchand
2023-02-03  3:50           ` Su, Simei
2023-02-02 13:24         ` David Marchand
2023-02-02 13:48           ` David Marchand
2023-02-03  8:38             ` Yang, Qiming
2023-02-03  8:47               ` David Marchand
2023-02-03  4:00           ` Su, Simei
2023-02-20  7:59         ` [PATCH v6] " Simei Su
2023-02-27  0:35           ` Zhang, Qi Z
2023-02-28  9:36             ` David Marchand
2023-03-02  9:51               ` Zhang, Qi Z
2023-03-22 16:50             ` Kevin Traynor
2023-03-23 14:50               ` Kevin Traynor
2023-03-24  6:32                 ` Jiang, YuX
2023-03-24  9:40                   ` Kevin Traynor
2023-03-24 10:20                     ` Jiang, YuX
2023-03-24 13:07                     ` Su, Simei
2023-03-06 12:18           ` [PATCH v7] net/i40e: fix max " Simei Su
2023-03-07  2:27             ` Zhang, Qi Z
2023-02-02 13:14       ` [PATCH v4] net/i40e: rework maximum " Kevin Traynor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MWHPR11MB18865344B93CA6CA6D66C186E5D69@MWHPR11MB1886.namprd11.prod.outlook.com \
    --to=qiming.yang@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=simei.su@intel.com \
    --cc=stable@dpdk.org \
    --cc=yuying.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).