DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: Akhil Goyal <akhil.goyal@nxp.com>,
	"'dev@dpdk.org'" <dev@dpdk.org>,
	"De Lara Guarch, Pablo" <pablo.de.lara.guarch@intel.com>,
	'Thomas Monjalon' <thomas@monjalon.net>,
	"Zhang, Roy Fan" <roy.fan.zhang@intel.com>,
	"Doherty, Declan" <declan.doherty@intel.com>
Cc: 'Anoob Joseph' <anoobj@marvell.com>,
	Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: Re: [dpdk-dev] [RFC PATCH 1/9] security: introduce CPU Crypto action type and API
Date: Wed, 30 Oct 2019 14:23:16 +0000	[thread overview]
Message-ID: <2601191342CEEE43887BDE71AB97725801A8C7292F@IRSMSX104.ger.corp.intel.com> (raw)
In-Reply-To: <VE1PR04MB663984FD000358D736CA6C89E66B0@VE1PR04MB6639.eurprd04.prod.outlook.com>


Hi Akhil,

> > > > > Added my comments inline with your draft.
> > > > > [snip]..
> > > > >
> > > > > >
> > > > > > Ok, then my suggestion:
> > > > > > Let's at least write down all points about crypto-dev approach where we
> > > > > > disagree and then probably try to resolve them one by one....
> > > > > > If we fail to make an agreement/progress in next week or so,
> > > > > > (and no more reviews from the community)
> > > > > > will have bring that subject to TB meeting to decide.
> > > > > > Sounds fair to you?
> > > > > Agreed
> > > > > >
> > > > > > List is below.
> > > > > > Please add/correct me, if I missed something.
> > > > > >
> > > > > > Konstantin
> > > > >
> > > > > Before going into comparison, we should define the requirement as well.
> > > >
> > > > Good point.
> > > >
> > > > > What I understood from the patchset,
> > > > > "You need a synchronous API to perform crypto operations on raw data
> > using
> > > > SW PMDs"
> > > > > So,
> > > > > - no crypto-ops,
> > > > > - no separate enq-deq, only single process API for data path
> > > > > - Do not need any value addition to the session parameters.
> > > > >   (You would need some parameters from the crypto-op which
> > > > >    Are constant per session and since you wont use crypto-op,
> > > > >    You need some place to store that)
> > > >
> > > > Yes, this is correct, I think.
> > > >
> > > > >
> > > > > Now as per your mail, the comparison
> > > > > 1. extra input parameters to create/init rte_(cpu)_sym_session.
> > > > >
> > > > > Will leverage existing 6B gap inside rte_crypto_*_xform between 'algo'
> > and
> > > > 'key' fields.
> > > > > New fields will be optional and would be used by PMD only when cpu-
> > crypto
> > > > session is requested.
> > > > > For lksd-crypto session PMD is free to ignore these fields.
> > > > > No ABI breakage is required.
> > > > >
> > > > > [Akhil] Agreed, no issues.
> > > > >
> > > > > 2. cpu-crypto create/init.
> > > > >     a) Our suggestion - introduce new API for that:
> > > > >         - rte_crypto_cpu_sym_init() that would init completely opaque
> > > > rte_crypto_cpu_sym_session.
> > > > >         - struct rte_crypto_cpu_sym_session_ops {(*process)(...); (*clear);
> > > > /*whatever else we'll need *'};
> > > > >         - rte_crypto_cpu_sym_get_ops(const struct rte_crypto_sym_xform
> > > > *xforms)
> > > > >           that would return const struct rte_crypto_cpu_sym_session_ops
> > *based
> > > > on input xforms.
> > > > > 	Advantages:
> > > > > 	1)  totally opaque data structure (no ABI breakages in future), PMD
> > > > writer is totally free
> > > > > 	     with it format and contents.
> > > > >
> > > > > [Akhil] It will have breakage at some point till we don't hit the union size.
> > > >
> > > > Not sure, what union you are talking about?
> > >
> > > Union of xforms in rte_security_session_conf
> >
> > Hmm, how does it relates here?
> > I thought we discussing pure rte_cryptodev_sym_session, no?
> >
> > >
> > > >
> > > > > Rather I don't suspect there will be more parameters added.
> > > > > Or do we really care about the ABI breakage when the argument is about
> > > > > the correct place to add a piece of code or do we really agree to add code
> > > > > anywhere just to avoid that breakage.
> > > >
> > > > I am talking about maintaining it in future.
> > > > if your struct is not seen externally, no chances to introduce ABI breakage.
> > > >
> > > > >
> > > > > 	2) each session entity is self-contained, user doesn't need to bring along
> > > > dev_id etc.
> > > > > 	    dev_id is needed  only at init stage, after that user will use session ops
> > > > to perform
> > > > > 	    all operations on that session (process(), clear(), etc.).
> > > > >
> > > > > [Akhil] There is nothing called as session ops in current DPDK.
> > > >
> > > > True, but it doesn't mean we can't/shouldn't have it.
> > >
> > > We can have it if it is not adding complexity for the user. Creating 2 different
> > code
> > > Paths for user is not desirable for the stack developers.
> > >
> > > >
> > > > > What you are proposing
> > > > > is a new concept which doesn't have any extra benefit, rather it is adding
> > > > complexity
> > > > > to have two different code paths for session create.
> > > > >
> > > > >
> > > > > 	3) User can decide does he wants to store ops[] pointer on a per session
> > > > basis,
> > > > > 	    or on a per group of same sessions, or...
> > > > >
> > > > > [Akhil] Will the user really care which process API should be called from the
> > > > PMD.
> > > > > Rather it should be driver's responsibility to store that in the session private
> > > > data
> > > > > which would be opaque to the user. As per my suggestion same process
> > > > function can
> > > > > be added to multiple sessions or a single session can be managed inside the
> > > > PMD.
> > > >
> > > > In that case we either need to have a function per session (stored internally),
> > > > or make decision (branches) at run-time.
> > > > But as I said in other mail - I am ok to add small shim structure here:
> > > > either rte_crypto_cpu_sym_session { void *ses; struct
> > > > rte_crypto_cpu_sym_session_ops ops; }
> > > > or rte_crypto_cpu_sym_session { void *ses; struct
> > > > rte_crypto_cpu_sym_session_ops *ops; }
> > > > And merge rte_crypto_cpu_sym_init() and rte_crypto_cpu_sym_get_ops()
> > into
> > > > one (init).
> > >
> > > Again that will be a separate API call from the user perspective which is not
> > good.
> > >
> > > >
> > > > >
> > > > >
> > > > > 	4) No mandatory mempools for private sessions. User can allocate
> > > > memory for cpu-crypto
> > > > > 	    session whenever he likes.
> > > > >
> > > > > [Akhil] you mean session private data?
> > > >
> > > > Yes.
> > > >
> > > > > You would need that memory anyways, user will be
> > > > > allocating that already.  You do not need to manage that.
> > > >
> > > > What I am saying - right now user has no choice but to allocate it via
> > mempool.
> > > > Which is probably not the best options for all cases.
> > > >
> > > > >
> > > > > 	Disadvantages:
> > > > > 	5) Extra changes in control path
> > > > > 	6) User has to store session_ops pointer explicitly.
> > > > >
> > > > > [Akhil] More disadvantages:
> > > > > - All supporting PMDs will need to maintain TWO types of session for the
> > > > > same crypto processing. Suppose a fix or a new feature(or algo) is added,
> > PMD
> > > > owner
> > > > > will need to add code in both the session create APIs. Hence more
> > > > maintenance and
> > > > > error prone.
> > > >
> > > > I think majority of code for both paths will be common, plus even we'll reuse
> > > > current sym_session_init() -
> > > > changes in PMD session_init() code will be unavoidable.
> > > > But yes, it will be new entry in devops, that PMD will have to support.
> > > > Ok to add it as 7) to the list.
> > > >
> > > > > - Stacks which will be using these new APIs also need to maintain two
> > > > > code path for the same processing while doing session initialization
> > > > > for sync and async
> > > >
> > > > That's the same as #5 above, I think.
> > > >
> > > > >
> > > > >
> > > > >      b) Your suggestion - reuse existing rte_cryptodev_sym_session_init() and
> > > > existing rte_cryptodev_sym_session
> > > > >       structure.
> > > > > 	Advantages:
> > > > > 	1) allows to reuse same struct and init/create/clear() functions.
> > > > > 	    Probably less changes in control path.
> > > > > 	Disadvantages:
> > > > > 	2) rte_cryptodev_sym_session. sess_data[] is indexed by driver_id,
> > > > which means that
> > > > > 	    we can't use the same rte_cryptodev_sym_session to hold private
> > > > sessions pointers
> > > > > 	    for both sync and async mode  for the same device.
> > > > >                    So the only option we have - make PMD devops-
> > > > >sym_session_configure()
> > > > > 	    always create a session that can work in both cpu and lksd modes.
> > > > > 	    For some implementations that would probably mean that under the
> > > > hood  PMD would create
> > > > > 	    2 different session structs (sync/async) and then use one or another
> > > > depending on from what API been called.
> > > > > 	    Seems doable, but ...:
> > > > >                    - will contradict with statement from 1:
> > > > > 	      " New fields will be optional and would be used by PMD only when
> > > > cpu-crypto session is requested."
> > > > >                       Now it becomes mandatory for all apps to specify cpu-crypto
> > > > related parameters too,
> > > > > 	       even if they don't plan to use that mode - i.e. behavior change,
> > > > existing app change.
> > > > >                      - might cause extra space overhead.
> > > > >
> > > > > [Akhil] It will not contradict with #1, you will only have few checks in the
> > > > session init PMD
> > > > > Which support this mode, find appropriate values and set the appropriate
> > > > process() in it.
> > > > > User should be able to call, legacy enq-deq as well as the new process()
> > > > without any issue.
> > > > > User would be at runtime will be able to change the datapath.
> > > > > So this is not a disadvantage, it would be additional flexibility for the user.
> > > >
> > > > Ok, but that's what I am saying - if PMD would *always* have to create a
> > > > session that can handle
> > > > both modes (sync/async), then user would *always* have to provide
> > parameters
> > > > for both modes too.
> > > > Otherwise if let say user didn't setup sync specific parameters at all, what
> > PMD
> > > > should do?
> > > >   - return with error?
> > > >   - init session that can be used with async path only?
> > > > My current assumption is #1.
> > > > If #2, then how user will be able to distinguish is that session valid for both
> > > > modes, or only for one?
> > >
> > > I would say a 3rd option, do nothing if sync params are not set.
> > > Probably have a debug print in the PMD(which support sync mode) to specify
> > that
> > > session is not configured properly for sync mode.
> >
> > So, just print warning and proceed with init session that can be used with async
> > path only?
> > Then it sounds the same as #2 above.
> > Which actually means that sync mode parameters for sym_session_init()
> > becomes optional.
> > Then we need an API to provide to the user information what modes
> > (sync+async/async only) is supported by that session for given dev_id.
> > And user would have to query/retain this information at control-path,
> > and store it somewhere in user-space together with session pointer and dev_ids
> > to use later at data-path (same as we do now for session type).
> > That definitely requires changes in control-path to start using it.
> > Plus the fact that this value can differ for different dev_ids for the same session -
> > doesn't make things easier here.
> 
> API wont be required to specify that. Feature flag will be sufficient, not a big change
> From the application perspective.
> 
> Here is some pseudo code just to elaborate my understanding. This will need some
> 
> From application,
> If(dev_info->feature_flags & RTE_CRYPTODEV_FF_SYNC) {
> 	/* set additional params in crypto xform */
> }
> 
> Now in the driver,
> pmd_sym_session_configure(dev,xform,sess,mempool) {
> 	...
> 	If(dev_info->feature_flags & RTE_CRYPTODEV_FF_SYNC
> 		&& xform->/*sync params are set*/) {
> 		/*Assign process function pointer in sess->priv_data*/
> 	} /* It may return error if FF_SYNC is set and params are not correct.

Then all apps will always *have to* setup  sync parameters in xform.
What you suggest is *mandatory* sync mode: user always has to setup sync
mode params if PMD does support it (no matter does he plan to use sync mode or not).   
Which means behavior change in existing apps.

> 	        It would be upto the driver whether it support both SYNC and ASYNC.*/
> }
> 
> Now the new sync API
> 
> pmd_process(...) {
> 	If(dev_info->feature_flags & RTE_CRYPTODEV_FF_SYNC
> 			 && sess_priv->process != NULL)
> 		sess_priv->process(...);
> 	else
> 		ASSERT("sync mode not configured properly or not supported");
> }
> 
> In the data path, there is no extra processing happening.
> Even in case of your suggestion, you should have these type of error checks,
> You cannot blindly trust on the application that the pointers are correct.
> 
> >
> > > Internally the PMD will not store the process() API in the session priv data
> > > And while calling the first packet, devops->process will give an assert that
> > session
> > > Is not configured for sync mode. The session validation would be done in any
> > case
> > > your suggestion or mine. So no extra overhead at runtime.
> >
> > I believe that after session_init() user should get either an error or
> > valid  session handler that he can use at runtime.
> > Pushing session validation to runtime doesn't seem like a good idea.
> >
> It may get a warning from the PMD, that FF_SYNC is set but params are not
> Correct/available. See above.

I think warning is not enough.
There should be a clear way (API) for developer to realize is the created session
can be used by sync API data-path or not. 

> 
> > >
> > > >
> > > >
> > > > >
> > > > >
> > > > > 	3) not possible to store device (not driver) specific data within the
> > > > session, but I think it is not really needed right now.
> > > > > 	    So probably minor compared to 2.b.2.
> > > > >
> > > > > [Akhil] So lets omit this for current discussion. And I hope we can find some
> > > > way to deal with it.
> > > >
> > > > I don't think there is an easy way to fix that with existing API.
> > > >
> > > > >
> > > > >
> > > > > Actually #3 follows from #2, but decided to have them separated.
> > > > >
> > > > > 3. process() parameters/behavior
> > > > >     a) Our suggestion: user stores ptr to session ops (or to (*process) itself)
> > and
> > > > just does:
> > > > >         session_ops->process(sess, ...);
> > > > > 	Advantages:
> > > > > 	1) fastest possible execution path
> > > > > 	2) no need to carry on dev_id for data-path
> > > > >
> > > > > [Akhil] I don't see any overhead of carrying dev id, at least it would be
> > inline
> > > > with the
> > > > > current DPDK methodology.
> > > >
> > > > If we'll add process() into rte_cryptodev itself (same as we have
> > > > enqueue_burst/dequeue_burst),
> > > > then it will be an ABI breakage.
> > > > Also there are discussions to get rid of that approach completely:
> > > >
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmails.dpd
> > k.org%2Farchives%2Fdev%2F2019-
> > September%2F144674.html&amp;data=02%7C01%7Cakhil.goyal%40nxp.com%7
> > C1859dc1d29cd45a51e9908d7571784bb%7C686ea1d3bc2b4c6fa92cd99c5c301
> > 635%7C0%7C0%7C637073630835415165&amp;sdata=Bz9jgisyVzRJNt1BijtvSlurh
> > JU1vXBbynNwlMDjaco%3D&amp;reserved=0
> > > > So I am not sure this is a recommended way these days.
> > >
> > > We can either have it in rte_cryptodev or in rte_cryptodev_ops whichever
> > > is good for you.
> > >
> > > Whether it is ABI breakage or not, as per your requirements, this is the correct
> > > approach. Do you agree with this or not?
> >
> > I think it is possible approach, but not the best one:
> > it looks quite flakey to me (see all these uncertainty with sym_session_init
> > above),
> > plus introduces extra overhead at data-path.
> 
> Uncertainties can be handled appropriately using a feature flag
> 
> >
> > >
> > > Now handling the API/ABI breakage is a separate story. In 19.11 release we
> > > Are not much concerned about the ABI breakages, this was discussed in
> > > community. So adding a new dev_ops wouldn't have been an issue.
> > > Now since we are so close to RC1 deadline, we should come up with some
> > > other solution for next release. May be having a pmd API in 20.02 and
> > > converting it into formal one in 20.11
> > >
> > >
> > > >
> > > > > What you are suggesting is a new way to get the things done without much
> > > > benefit.
> > > >
> > > > Would help with ABI stability plus better performance, isn't it enough?
> > > >
> > > > > Also I don't see any performance difference as crypto workload is heavier
> > than
> > > > > Code cycles, so that wont matter.
> > > >
> > > > It depends.
> > > > Suppose function call costs you ~30 cycles.
> > > > If you have burst of big packets (let say crypto for each will take ~2K cycles)
> > that
> > > > belong
> > > > to the same session, then yes you wouldn't notice these extra 30 cycles at all.
> > > > If you have burst of small packets (let say crypto for each will take ~300
> > cycles)
> > > > each
> > > > belongs to different session, then it will cost you ~10% extra.
> > >
> > > Let us do some profiling on openssl with both the approaches and find out the
> > > difference.
> > >
> > > >
> > > > > So IMO, there is no advantage in your suggestion as well.
> > > > >
> > > > >
> > > > > 	Disadvantages:
> > > > > 	3) user has to carry on session_ops pointer explicitly
> > > > >     b) Your suggestion: add  (*cpu_process) inside rte_cryptodev_ops and
> > then:
> > > > >         rte_crypto_cpu_sym_process(uint8_t dev_id,
> > rte_cryptodev_sym_session
> > > > *sess, /*data parameters*/) {...
> > > > >                      rte_cryptodevs[dev_id].dev_ops->cpu_process(ses, ...);
> > > > >                       /*and then inside PMD specifc process: */
> > > > >                      pmd_private_session = sess-
> > >sess_data[this_pmd_driver_id].data;
> > > > >                      /* and then most likely either */
> > > > >                      pmd_private_session->process(pmd_private_session, ...);
> > > > >                      /* or jump based on session/input data */
> > > > > 	Advantages:
> > > > > 	1) don't see any...
> > > > > 	Disadvantages:
> > > > > 	2) User has to carry on dev_id inside data-path
> > > > > 	3) Extra level of indirection (plus data dependency) - both for data and
> > > > instructions.
> > > > > 	    Possible slowdown compared to a) (not measured).
> > > > >
> > > > > Having said all this, if the disagreements cannot be resolved, you can go
> > for a
> > > > pmd API specific
> > > > > to your PMDs,
> > > >
> > > > I don't think it is good idea.
> > > > PMD specific API is sort of deprecated path, also there is no clean way to use
> > it
> > > > within the libraries.
> > >
> > > I know that this is a deprecated path, we can use it until we are not allowed
> > > to break ABI/API
> > >
> > > >
> > > > > because as per my understanding the solution doesn't look scalable to
> > other
> > > > PMDs.
> > > > > Your approach is aligned only to Intel , will not benefit others like openssl
> > > > which is used by all
> > > > > vendors.
> > > >
> > > > I feel quite opposite, from my perspective majority of SW backed PMDs will
> > > > benefit from it.
> > > > And I don't see anything Intel specific in my proposals above.
> > > > About openssl PMD: I am not an expert here, but looking at the code, I think
> > it
> > > > will fit really well.
> > > > Look yourself at its internal functions:
> > > > process_openssl_auth_op/process_openssl_crypto_op,
> > > > I think they doing exactly the same - they use sync API underneath, and they
> > are
> > > > session based
> > > > (AFAIK you don't need any device/queue data, everything that needed for
> > > > crypto/auth is stored inside session).
> > > >
> > > By vendor specific, I mean,
> > > - no PMD would like to have 2 different variants of session Init APIs for doing
> > the same stuff.
> > > - stacks will become vendor specific while using 2 separate session create APIs.
> > No stack would
> > > Like to support 2 variants of session create- one for HW PMDs and one for SW
> > PMDs.
> >
> > I think what you refer on has nothing to do with 'vendor specific'.
> > I would name it 'extra overhead for PMD and stack writers'.
> > Yes, for sure there is extra overhead (as always with new API) -
> > for both producer (PMD writer) and consumer (stack writer):
> > New function(s) to support,  probably more tests to create/run, etc.
> > Though this API is optional - if PMD/stack maintainer doesn't see
> > value in it, they are free not to support it.
> > From other side, re-using  rte_cryptodev_sym_session_init()
> > wouldn't help anyway - both data-path and control-path would differ
> > from async mode anyway.
> > BTW, right now to support different HW flavors
> > we do have 4 different control and data-paths for both
> > ipsec-secgw and librte_ipsec:
> > lkds-none/lksd-proto/inline-crypto/inline-proto.
> > And that is considered to be ok.
> 
> No that is not ok. We cannot add new paths for every other case.

What I am saying: if let-say lookaside-proto/inline-crypto/inline-proto
deserves its own case in rte_security/rte_crypto API,
I don't understand why cpu-crypto doesn't.

> Those 4 are controlled using 2 set of APIs.

Yes there are 2 API sets (rte_cryptodev/rte_security),
but in fact if you look at ipsec-secgw and librte_ipsec we have 4 different code paths.
For both create_session() and ipsec_enqueue() we have a big switch() with 4 different cases.
Nearly the same for librte_ipsec - we have different prepare/process
function pointers for each security type.  

> We should try our best to
> Have minimum overhead to the application writer. This pain was also discussed
> In the one of DPDK conference as well.
> DPDK is not a standalone entity, there are stacks running over it always.
> We should not add API for every other use case when we have an alternative
> Approach with the existing API set.
> 
> Now introducing another one would add to that pain and a lot of work for
> Both producer and consumer.

If I would see a clean approach to implement desired functionality
without introducing new API - I would definitely support it.
The problem is  that from my perspective,
what you suggesting with existing API will bring more drawbacks then positives.
BTW, our first approach (via rte_security) does reuse existing API,
so if adding new API is the main concern - let's reconsider that path.    

> It would be interesting to see how much performance difference will be there in the
> Two approaches. As per my understanding it wont be much as compared to the
> Extra work that you will be inducing.
> 
> -Akhil
> 
> > Honestly, I don't understand why SW backed implementations
> > can't have their own path that would suite them most.
> > Konstantin
> >
> >
> >
> >
> >


  reply	other threads:[~2019-10-30 14:23 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-03 15:40 [dpdk-dev] [RFC PATCH 0/9] security: add software synchronous crypto process Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 1/9] security: introduce CPU Crypto action type and API Fan Zhang
2019-09-04 10:32   ` Akhil Goyal
2019-09-04 13:06     ` Zhang, Roy Fan
2019-09-06  9:01       ` Akhil Goyal
2019-09-06 13:12         ` Zhang, Roy Fan
2019-09-10 11:25           ` Akhil Goyal
2019-09-11 13:01             ` Ananyev, Konstantin
2019-09-06 13:27         ` Ananyev, Konstantin
2019-09-10 10:44           ` Akhil Goyal
2019-09-11 12:29             ` Ananyev, Konstantin
2019-09-12 14:12               ` Akhil Goyal
2019-09-16 14:53                 ` Ananyev, Konstantin
2019-09-16 15:08                   ` Ananyev, Konstantin
2019-09-17  6:02                   ` Akhil Goyal
2019-09-18  7:44                     ` Ananyev, Konstantin
2019-09-25 18:24                       ` Ananyev, Konstantin
2019-09-27  9:26                         ` Akhil Goyal
2019-09-30 12:22                           ` Ananyev, Konstantin
2019-09-30 13:43                             ` Akhil Goyal
2019-10-01 14:49                               ` Ananyev, Konstantin
2019-10-03 13:24                                 ` Akhil Goyal
2019-10-07 12:53                                   ` Ananyev, Konstantin
2019-10-09  7:20                                     ` Akhil Goyal
2019-10-09 13:43                                       ` Ananyev, Konstantin
2019-10-11 13:23                                         ` Akhil Goyal
2019-10-13 23:07                                           ` Zhang, Roy Fan
2019-10-14 11:10                                             ` Ananyev, Konstantin
2019-10-15 15:02                                               ` Akhil Goyal
2019-10-16 13:04                                                 ` Ananyev, Konstantin
2019-10-15 15:00                                             ` Akhil Goyal
2019-10-16 22:07                                           ` Ananyev, Konstantin
2019-10-17 12:49                                             ` Ananyev, Konstantin
2019-10-18 13:17                                             ` Akhil Goyal
2019-10-21 13:47                                               ` Ananyev, Konstantin
2019-10-22 13:31                                                 ` Akhil Goyal
2019-10-22 17:44                                                   ` Ananyev, Konstantin
2019-10-22 22:21                                                     ` Ananyev, Konstantin
2019-10-23 10:05                                                     ` Akhil Goyal
2019-10-30 14:23                                                       ` Ananyev, Konstantin [this message]
2019-11-01 13:53                                                         ` Akhil Goyal
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 2/9] crypto/aesni_gcm: add rte_security handler Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 3/9] app/test: add security cpu crypto autotest Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 4/9] app/test: add security cpu crypto perftest Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 5/9] crypto/aesni_mb: add rte_security handler Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 6/9] app/test: add aesni_mb security cpu crypto autotest Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 7/9] app/test: add aesni_mb security cpu crypto perftest Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 8/9] ipsec: add rte_security cpu_crypto action support Fan Zhang
2019-09-03 15:40 ` [dpdk-dev] [RFC PATCH 9/9] examples/ipsec-secgw: add security " Fan Zhang
2019-09-06 13:13 ` [dpdk-dev] [PATCH 00/10] security: add software synchronous crypto process Fan Zhang
2019-09-06 13:13   ` [dpdk-dev] [PATCH 01/10] security: introduce CPU Crypto action type and API Fan Zhang
2019-09-18 12:45     ` Ananyev, Konstantin
2019-09-29  6:00     ` Hemant Agrawal
2019-09-29 16:59       ` Ananyev, Konstantin
2019-09-30  9:43         ` Hemant Agrawal
2019-10-01 15:27           ` Ananyev, Konstantin
2019-10-02  2:47             ` Hemant Agrawal
2019-09-06 13:13   ` [dpdk-dev] [PATCH 02/10] crypto/aesni_gcm: add rte_security handler Fan Zhang
2019-09-18 10:24     ` Ananyev, Konstantin
2019-09-06 13:13   ` [dpdk-dev] [PATCH 03/10] app/test: add security cpu crypto autotest Fan Zhang
2019-09-06 13:13   ` [dpdk-dev] [PATCH 04/10] app/test: add security cpu crypto perftest Fan Zhang
2019-09-06 13:13   ` [dpdk-dev] [PATCH 05/10] crypto/aesni_mb: add rte_security handler Fan Zhang
2019-09-18 15:20     ` Ananyev, Konstantin
2019-09-06 13:13   ` [dpdk-dev] [PATCH 06/10] app/test: add aesni_mb security cpu crypto autotest Fan Zhang
2019-09-06 13:13   ` [dpdk-dev] [PATCH 07/10] app/test: add aesni_mb security cpu crypto perftest Fan Zhang
2019-09-06 13:13   ` [dpdk-dev] [PATCH 08/10] ipsec: add rte_security cpu_crypto action support Fan Zhang
2019-09-26 23:20     ` Ananyev, Konstantin
2019-09-27 10:38     ` Ananyev, Konstantin
2019-09-06 13:13   ` [dpdk-dev] [PATCH 09/10] examples/ipsec-secgw: add security " Fan Zhang
2019-09-06 13:13   ` [dpdk-dev] [PATCH 10/10] doc: update security cpu process description Fan Zhang
2019-09-09 12:43   ` [dpdk-dev] [PATCH 00/10] security: add software synchronous crypto process Aaron Conole
2019-10-07 16:28   ` [dpdk-dev] [PATCH v2 " Fan Zhang
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 01/10] security: introduce CPU Crypto action type and API Fan Zhang
2019-10-08 13:42       ` Ananyev, Konstantin
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 02/10] crypto/aesni_gcm: add rte_security handler Fan Zhang
2019-10-08 13:44       ` Ananyev, Konstantin
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 03/10] app/test: add security cpu crypto autotest Fan Zhang
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 04/10] app/test: add security cpu crypto perftest Fan Zhang
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 05/10] crypto/aesni_mb: add rte_security handler Fan Zhang
2019-10-08 16:23       ` Ananyev, Konstantin
2019-10-09  8:29       ` Ananyev, Konstantin
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 06/10] app/test: add aesni_mb security cpu crypto autotest Fan Zhang
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 07/10] app/test: add aesni_mb security cpu crypto perftest Fan Zhang
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 08/10] ipsec: add rte_security cpu_crypto action support Fan Zhang
2019-10-08 23:28       ` Ananyev, Konstantin
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 09/10] examples/ipsec-secgw: add security " Fan Zhang
2019-10-07 16:28     ` [dpdk-dev] [PATCH v2 10/10] doc: update security cpu process description Fan Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2601191342CEEE43887BDE71AB97725801A8C7292F@IRSMSX104.ger.corp.intel.com \
    --to=konstantin.ananyev@intel.com \
    --cc=akhil.goyal@nxp.com \
    --cc=anoobj@marvell.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=hemant.agrawal@nxp.com \
    --cc=pablo.de.lara.guarch@intel.com \
    --cc=roy.fan.zhang@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).